Overview BIASI INOVIA COND E 25S METHANE CONDENSING BOILER - NEW ErP, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: Wall mounted condensing boilers. The premixed range is simple on the outside and technological on the inside. The sites displaying the Biasi web sales authorized brand have been authorized by BSG Caldaie a Gas SpA for the sale of Biasi products. These companies therefore release the conventional guarantee. Technical specifications o Model: Inovia Cond E 25S Energy label specifications according to the European ErP directive o Class A heating energy efficiency o Sanitary energy efficiency Class A o Withdrawal profile: XL Characteristics of heating/DHW operation: o DHW useful thermal power: 24.4 kW o Useful thermal power for heating: 19.5 kW o Nominal kW heat input(*): 25 kW o Efficiency at 100% load: 106.2% o Sanitary flow rate t =25°K: 15.9 l/min o High yields (in compliance with yield directive 92/42 CEE and Legislative Decree 311/06) o Sanitary comfort (EN 13203) o Total premix burner, built in stainless steel (Class NOx 5) o Sanitary plate heat exchanger in stainless steel o High efficiency pump with low energy consumption o IPX5D degree of protection o Dimensions hxwxd: mm 700 x 400 x 290; 32kg o METHANE power supply Main features Inovia Cond E Premixed condensing boilers Inovia Cond E represents the new premixed BIASI condensing boiler. Inovia Cond E is equipped with innovative aesthetics and a new interface that is immediate and easy to use, it is equipped with new functions that make it an integral part of a system and which facilitate its installation and maintenance. Inovia Cond E offers all the advantages of condensing technology: great performance, high efficiency, energy saving and respect for the environment thanks to reduced polluting emissions such as NOx and CO. Installed in low temperature systems, they allow savings of up to 30%. Characteristics: o • High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) or • Sanitary comfort (EN 13203) o • Primary condensing exchanger in stainless steel with plastic coating to offer maximum resistance to corrosion o • Total premix burner, built in stainless steel (Class NOx 5) or • Sanitary plate heat exchanger in stainless steel or • High efficiency pump with low energy consumption or • IPX5D degree of protection or • Can be installed in a partially protected place or • Integration with BIASI solar systems, using a solar kit o • Innovative digital control panel with graphic interface and keys or • Digital pressure reading by pressure transducer or • Arrangement for remote control and external probe or • Possibility of remotely managing a zone valve in the case of multi-zone systems. Control panel: o Summer/winter/off selector o Heating temperature regulator o DHW temperature regulator o Digital pressure reading o Domestic hot water and heating temperature visualization from the display o Visualization of fault diagnostics, block status and fault history o Recommended filling view and filling guide o View months left until annual maintenance is due o External temperature display (with external probe connected) and signaling of external probe connected and K value set o Display of flame modulation o Visualization of the BIASI SOLCONTROL solar control unit connected to Inovia Cond E, active solar pump and solar integration o DHW comfort function selectable by means of a dedicated and programmable key o Direct access to the INFO menu dedicated to the user. Fiscal detraction As a condensing boiler, Inovia Cond E allows you to take advantage of the tax deduction according to current legislation. d Thermoregulation By connecting the external probe (optional) directly to the boiler, climatic regulation can be used. Inovia Cond E will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. The boiler is equipped with a complete set of curves which can be accessed by entering programming. The curve is simply chosen from the control panel. Solar management Inovia Cond E integrates solar management directly into the product. Thanks to the integrated solar management it is possible to connect the SOLCONTROL control unit and view the status of the pump and the relative solar integration. Zone management Inovia Cond E features the zone management card as standard which allows you to manage a zone valve using the BIASI remote control. In the case of a system with several high temperature zones, one zone can be managed by remote control and the other zones can be managed by chronothermostats. This allows you to select two thermoregulation curves, one in the boiler and the other in the remote control. All the zones controlled by chronothermostats will be managed by the thermoregulation curve set in the boiler, the zone controlled by the remote control will be managed by the thermoregulation curve set therein. In the case of multi-zone systems at high and low temperatures, it is recommended to use the BIASI MULTIzone system manager. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the Eco-Design Directive (ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: or generators with a capacity of less than 400 kW or water heaters with a capacity of less than 400 kW, or kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows them to compare the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: o product energy label; o product data sheet; o system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; o technical data sheet of the system with the parts relating to the product or the system already completed. o Dealer liability First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: o all appliances and/or systems are equipped with the respective labels and make sure that they are clearly visible; o all devices and/or systems are always accompanied by the mandatory technical data sheets; o any type of advertising, promotional or technical material in which energy data or price indications are shown, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO EVOdens MAX E 35S* CONDENSING BOILER WITH TANK COMPLETE WITH LPG LPG FUME EXHAUST KIT - NEW ErP Technical specifications Model:ÿEVODENS MAX LPG code: 103041007300 LPG code: 103141006300 Characteristics of heating/sanitary exercises: Heating/sanitary nominal heat inputkWÿ30.0 / 34.0 Heating/sanitary maximum useful powerkWÿ29.5 / 33.4 Yield name 60ø/80øC %ÿ98.2 Yield min. 60ø/80øC %ÿ97.6 Yield at 30% of the %102.1ÿ load Energy efficiencynø Minimum / maximum heating temperature**øC 25 / 85 Sanitary minimum / maximum pressurebar 0.3 / 3.0 Sanitary expansion vessel capacity (total) l 2.0 Boiler nominal capacity l 45 Boiler useful capacity l 41 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ20.8 / 13.6 Voltage / Power at nominal heat input V ~ / W 230 ~ / 112 Power at minimum thermal capacity W 10 Power at rest (stand-by) W 5 Degrees of protection nø IPX4D Boiler water content 3.5 l Dimensions HxWxD:ÿ900x600x400; 70.5 Characteristics EVO DENS MAX E The EVODENS MAX E boilers with porcelain-glass storage tank were designed to satisfy the most demanding users: large and immediate production of domestic hot water despite being a boiler of contained dimensions. The storage tank, together with the latest generation primary condensing exchanger, ensure continuous supply of domestic water in service at the desired temperature. For this reason, EVODENS MAX E boilers are the ideal solution for the comfort of the whole family. Features:ÿ High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary and condensing exchanger in stainless steel with plastic coatings to offer maximum resistance to corrosion Total premix burner, built in stainless steel (ClassÿNOx 5) High efficiency pump with low energy consumption, ErP Ready Maximum power adjustable according to the needs of the system Glass-porcelain steel boiler with convenient inspection and cleaning flange Magnesium anodal dismountable External insulation of the boiler in polyurethane foam Two-litre sanitary expansion tanks, as standard Degrees of protection IPX5D Installability in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel with graphical interface and keys Digital pressure reading by pressure transducer Arrangement for external probe remote control Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems Four-controllers Summer / winter / off selector Heating temperature regulator DHW temperature regulator Digital pressure reading DHW and heating temperature visualization from the display Fault diagnostics display, fault history block status View recommended fills fill guide View months left until annual maintenance is due External temperature display (with external probe connected) and signaling of external probe connected and ÿK value set Flame modulation display Visualization of SaviSOLCONTROL solar control unit connected to EVODENS MAX E, active solar pump and solar integration Sanitary comfort function selectable via dedicated key Ingressdirectal INFO menu dedicated to the user STANDARD: Boiler support bracket and paper template Boiler power cable Condensate collection siphon Quick instruction to the user OPTIONALS: Paper template remote control External probe kit Tap kit (system boiler connection pipes, gas and sanitary water taps and quick couplings) Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

ATTENTION Possibility of propane supply by means of a simple regulation. For info, contact the local authorized assistance center in advance Hermann Saunier Duval MASTER CONDENS 26 25 kW condensing boiler with 42 liter boiler - NEW Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60°C kW 2.7 - 20.6 Sanitary Fireplace flow rate Qmin/max - 60°C kW 2.7 - 26.0 Specific flow rate (∆T = 25K) (EN13203) l/min 14.8 Dimensions mm (HxLxP) 892x470x514 MASTER CONDENS Wall mounted combined condensing boiler with integrated storage tank and Aquaspeed PLUS® system Limitless comfort. At the top of the range in terms of performance, sanitary comfort and optimization of consumption, the new Master Condens has a renewed design, flat casing to facilitate installation and an innovative touch-screen user interface. The improved Aquaspeed PLUS® technology, combined with the new FlameFit® gas-adaptable combustion system, guarantees exceptional sanitary comfort, while the two 21-litre boilers make Master Condens the ideal solution for large families and homes with several bathrooms, ensuring hot water reserve, immediately available. The new Smart Tank Loading function avoids unnecessary energy consumption: based on the user's daily needs recorded in the first few weeks, the boiler autonomously heats the water only when necessary. The range consists of three natural gas models of 26, 31 and 35kW, which can be converted to propane via simple electronic regulation. The hydraulic connections are unchanged from the previous version. Maximum sanitary comfort with the Aquaspeed PLUS® system Large quantities of hot water immediately available Temperature stability even with multiple simultaneous withdrawals New FlameFit® combustion technology Smart Tank Loading function High modulation up to 1:10 New 26kW model Modern design with touch-screen user interface New diagnostics and malfunction detection The new Master Condens range boasts exceptionally low consumption and is positioned at the top of the category both in terms of sanitary comfort and efficiency thanks also to the exclusive Aquaspeed PLUS ® system for the production of domestic hot water which allows for stable temperatures even in the event of large contemporary withdrawals for comfort at the highest levels. Innovation at the service of comfort. Aquaspeed PLUS® and integrated boilers: comfort is absolute Thanks to the implementation of the Aquaspeed PLUS® system and the two stainless steel boilers of 21 liters each, Master Condens guarantees exceptional sanitary comfort with extremely low gas consumption. The ideal solution to meet the need for large quantities of domestic hot water, the boiler is able to satisfy the simultaneous requests of multiple users while maintaining maximum stability of the temperature of the water supplied. By exploiting the principle of stratification, the two boilers are in fact able to supply up to 276 liters of water (ΔT = 30K) for ten minutes without temperature fluctuations: the water contained in the upper part of the first boiler is always kept hot and, in short time, the heat needed to reach the desired brewing temperature is transferred uniformly to the rest of the two interconnected boilers. FlameFit® technology: more efficiency, less consumption and emissions The innovative FlameFit® combustion technology with which all Master Condens models are equipped allows the boiler to be adapted autonomously to the different types and qualities of gas, always guaranteeing optimized and fully functioning safety. In fact, the flame control electrode detects the varied characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the operation of the boiler to the actual needs of the user, with consequent energy savings, reduction of consumption as well as polluting emissions . FlameFit® technology makes Master Condens ready to operate with any type of future gas, without the need for conversion kits. New touch screen user interface The interface of the new Master Condens features a modern digital touch display and has been designed to simplify boiler management by the user as much as possible. The symbology of the various keys and the "talking messages" that can be viewed on the display allow for a rapid understanding of the main functions and how to set parameters according to one's comfort needs. 4-star energy classification (92/42/EEC) with yields up to 109.5%; 3-star DHW comfort (EN 13203-1), thanks to the exclusive Aquaspeed PLUS® technology with DHW plate heat exchanger in stainless steel and double dynamic storage tank (42 litres). Solar Easy . All models in the Master Condens range are compatible with all solar systems. If solar radiation is not sufficient to keep the domestic water at the desired temperature, the boiler intervenes as an integration. Master Condens is compatible with the MiGo WiFi control unit . The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS MINI NIKE GAS BOILER 28 Kw LPG OPEN CHAMBER Technical features Energy class in heating: C; Sanitary energy class: B; Heating/DHW performance (): Max nominal heat input in heat/san. kW (kcal/h) 30.9 (26,571); Nominal heat input min. in heating/san. kW (kcal/h) 12.0 (10,356); useful heat output max. in heating/san. kW (kcal/h) 27.9 (23,994); Useful heat output min. in heating/san. kW (kcal/h) 10.5 (9,030); Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 13.3; pressure min. DHW circuit dynamics bar 0.3; Nominal heating expansion vessel capacity (total) liters 7.5 (4.5); Electrical protection degree IP X4D; Power supply: LPG; General characteristics The NIKE MINI boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a LED for identifying operation and any malfunction. Finally, given its great reliability not only in terms of performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Designed to meet all the needs of its customers, the Immergas Nike Mini boiler respects the environment (ErP), it has been programmed to guarantee the functions that preserve the integrity of the generator over time. The use of the product is made even more versatile thanks to the possibility of combining it with numerous system and thermoregulation optionals such as CARV2, external probe, DIM range and control unit for zone systems. Ideal for replacing old boilers in the presence of flues branched collectives. Dimensions (HxWxD): 785x450x310; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance Technical features Model : Bluehelix Pro RRT 24 C Energy label specifications according to the European ErP directive Heating energy efficiency class: A Sanitary energy efficiency class XL profile: A NOx class : 6 Characteristics of heating/DHW operation: Heating Thermal Power: 20 kW Thermal Power in Sanitary: 24 kW Maximum Heating Power 80°C - 60°C : 20 kW Useful Thermal Efficiency 80°C - 60°C: 98.1% Useful Thermal Efficiency 50°C - 30°C : 106.1% Domestic hot water production Δt 30°C: 11.5 l/min Domestic hot water production Δt 25°C: 13.8 l/min Power supply: methane or LPG Dimensions and weight Extremely Compact Dimensions (HxWxD): 600x400x320 mm Weight : 29Kg Ferroli BLUEHELIX PRO RRT boiler Ecological wall-hung condensing boilers with Ferroli Thermobalance™ DUAL combustion cell .. Evolution Continues With attention to aesthetics and silence, it continues the tradition of appreciation of the previous "Bluehelix Pro" series. The range of generators is equipped with the tested primary heat exchanger for heating and domestic hot water in very thick stainless steel integrated in a single component, INOX DUAL . Designed and built according to the new ErP directives for eco-compatible design and labelling. BLUEHELIX PRO RRT achieves one of the highest energy efficiency in its category both in space heating, ηs 94% (Class A ErP, scale from G to A++), and in domestic water heating, ηwh 93% . Furthermore, when combined with the external probe and the Romeo remote timer control or the new Connect control, it reaches system energy class A+ (scale from G to A+++). Extended Warranty with the "5 Year Carefree" Formula The quality of BLUEHELIX PRO RRT is unquestionable, and Ferroli is ready to put it to the test by offering its customers an extended warranty coverage which also ensures periodic maintenance and legal checks The New Design for Comfort The particularly careful design of BLUEHELIX PRO RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces , which descends to cover the connections of the pipes . PRO RRT Inside view Innovative Thermal Unit Ferroli ThermoBalance TM in its 5 Elements Ferroli has oriented the design of the combustion cell and the BLUEHELIX PRO RRT heat exchanger in order to maximize the functional advantages and the constructive sturdiness , as well as the simplicity of maintenance . The single-pipe design, both in the DHW and heating circuits, ensures that any air bubbles in the system do not get trapped in the exchanger, and makes it as easy as possible to clean it with chemical washing, unlike spiral exchangers with double parallel circuit (more common) in which if only one of the circuits is clogged, chemical washing is much more laborious 1. Exchanger: DUAL single-circuit stainless steel exchanger with high passages , resistant to clogging and easy to clean, capable of condensing even in sanitary production 2. Burner door : Self-cooled burner door without insulating panel 3. Burner : Exclusive special stainless steel hemispherical burner with long-life gasket 4. Gas Adaptive : Intelligent " Gas-adaptive " system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary 5. Fan : Offset fan, to facilitate maintenance of the boiler without disassembly. Integrated smoke anti-reflux clapper for connection to CCS (compliant with UNI 7129) The Combustion Cell Engine The tube that makes up the BLUEHELIX PRO RRT exchanger is made of stainless steel , a material that allows for the creation of an extremely smooth surface , therefore less susceptible to encrusting agents and deposits. Full Condensation The exchanger of the THERMOBALANCE™ DUAL thermal unit of Bluehelix PRO RRT is made using a concentric spiral without joints or welds. An additional pipe for the preparation of domestic hot water is inserted inside the main spiral, which serves the heating system. The latter is not bound to the main coil but remains immersed in the primary system fluid. The integration in a single block, both of the domestic hot water exchanger and of the primary one, reduces the average operating temperatures especially during the production of domestic hot water thus favoring the phenomenon of condensation. Therefore, unlike most of the products in its category, BLUEHELIX PRO RRT is able to condense even during the production of domestic hot water, reaching energy efficiencies among the highest not only in room heating (ηs 94%) but also in domestic water heating (ηwh 93%). The geometry of the exchanger, particularly generous in the useful passage sections both on the heating circuit and on the domestic hot water circuit, allows the exchanger of the THERMOBALANCE™ DUAL heating unit to operate almost at maximum design efficiency even in conditions of possible partial blockage. The serpentine conformation contrasts the deposit of impurities not only due to the regularity of the path crossed by the water, but also due to the "centrifugal" effect (SELF CLEANING) imprinted on the water itself on the walls of the serpentine. Furthermore, the absence of parallel circuits , both on the heating and DHW side, makes any chemical washing operations of the exchanger and the elimination of any air present in the system circuit extremely easy. Connect The new remote control New wireless remote control available as an accessory for home comfort management also from a smartphone using the connect app (iOS and Android) . Maximizes room comfort with delivery temperature modulation through the Room Climatic Compensation (CCA) and External Climatic Compensation (CCE) functions via the external temperature detectable directly from the internet (or from an optional external probe). It improves the average seasonal efficiency in space heating by +4%. External Climatic Compensation By reading the external temperature (from the internet or from the optional external probe) the system is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, thus guaranteeing the user maximum room comfort as the the external climatic conditions Environmental Compensation The modulating function of CONNECT allows modulation of the boiler power as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Panel Boiler Control , Commands and Functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs . The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems MC 2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC 2 : Multi Combustion Control , the new combustion system with patented gas-adaptive technology improves the adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the THERMOBALANCETM DUAL heating unit allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels The electrical box of the electronic card can be easily extracted from the chassis and hooked laterally, leaving free access to the internal parts The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-manifolded single-pipe circuit, both on the DHW and heating circuits The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections Simplified Replacement Flue outlet ø 50 mm The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters Collective under pressure FPS: Fume Protection System. The flue clapet valve (installed as standard) allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard . For installers, the solution of the pressurized collective flue is more economical (reduction of of fireplaces) Comfort and Safety Functions The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance Stop and go function With the use of sanitary mixing taps, short or very short dispensing for quick rinses involve the start of the boiler ignition procedure which usually ends immediately. The continuation of these " false starts " can, in the long run, compromise the average life of the product. For this reason BLUEHELIX PRO RRT provides an electronic parameter through which it is possible to delay burner ignition (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water Sun Easy function BLUEHELIX PRO RRT has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user Self-Cleaning function The generous cross-section of the exchanger pipes , both on the plant and sanitary side, allows for a large passage of water . Furthermore, the "centrifugal" effect given to the water by the coil shape of the single-circuit exchanger generates a self-cleaning effect on the walls which counteracts the deposit of impurities . Finally, the absence of circuits in parallel, both on the heating and DHW sides, makes any chemical washing operations of the exchanger and the elimination of any air present in the system circuit extremely easy . Outdoor installation - Antifreeze function To make the most of the available space, the new BLUEHELIX PRO RRT 24C boiler can be installed recessed into the wall thanks to the special kit; for more critical installations, in completely uncovered places not protected from atmospheric agents, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost . This function is active with the boiler powered by the gas circuit and under electrical voltage Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

FONDITAL PANAREA COMPACT CTN 24 AF METHANE OPEN CHAMBER GAS BOILER Characteristics of heating/DHW operation: Open chamber with natural draft Nominal heat output: 23 kW Efficiency at maximum power: 90.6% Efficiency at 30% load: 89.4% Classification according to 92/42/EEC: ** NOx class (EN 297/EN 483); 2 Min-max sanitary pressure: 0.5 - 6 bar Heating temperature adjustment °C 35-78 Expansion vessel capacity: 7 l DHW production ∆t 30°C: 11.2 l/min Total absorbed electric power: 57 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 420x750x315 mm; 36kg METHANE power supply Warranty: 2 years FORMENTERA CTN Formentera CTN is a wall-hung instantaneous combined gas boiler with open chamber and natural draft. The gas boiler is equipped with a touch screen user interface and is set up to be powered by methane or LPG.  Pluses: Touch screen user interface Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates Standard management of three types of solar thermal system Boiler change kit Characteristics: High efficiency circulator with built-in deaerator Standard management of 3 types of solar thermal system Monothermal primary heat exchanger Sanitary heat exchanger with 26 stainless steel plates Integrated hydraulic unit including automatic by-pass, safety valve, pressure transducer, drain cock and connection to the expansion tank Integrated electronic board for safety and flame modulation Sliding temperature operation with external probe (optional) Management of high and low temperature heating zones, via electronic board (optional) Efficiency classification according to 92/42/EEC: ★★ Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Dimensions Dimensions (LxHxP): 400x700x250 mm Weight: 25.2kg Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

GAS BOILER BERETTA EXCLUSIVE 28 CAI METHANE OPEN CHAMBER - NEW ErP Technical specifications Product code: 20095669 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitaryware energy efficiencyprofilXL Class B Characteristics of heating/sanitary exercises: Heating/DHW nominal heat output: 28 kW Quantity of hot water with t=25øC: 16 l/min Dimensions (hxwxd) mmÿ805 x 450 x 332 METHANE power supply Open chamber Features list EXCLUSIVE ErP Exclusive renews its image with a new aesthetic. Exclusive makes available a wide range, complete with instantaneous combined models, heating only and versions equipped with micro-storage tank. Exclusive equipped with an innovative electronic interface for easy and intuitive management. The SARA Booster system Exclusive integrates the SARA Booster system (Environmental Self-Regulation System) which allows the desired temperature to be reached more quickly. The SARA Booster system activates in the WINTER COMFORT position. If the room requires heat, the delivery temperature is automatically increased every 10 minutes in steps of 5°Cÿ so as to reduce the response time both with respect to Exclusive in WINTER stat and to a traditional boiler. Characteristics: CAI boilers, ErP version, equipped with low consumption circulator. Environmental Self-Regulation System (SARA Booster) Innovative simple and intuitive digital display Easy implant loading system Functions or Comfort Degrees of electrical protection IPX5D Standard thermoregulation (optional external probe) Standard hydraulic fitting cover Template, plumbing fittings, gas and sanitary fittings For gas transformation, contact the authorized Beretta Technical Assistance Centres Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available In case of unavailability, the new DIVATECH D LNC 30 model will be supplied Technical features Model : Divaproject C30 Power supply: LPG Performance Energy efficiency class in heating: C DHW energy efficiency class: A Heating nominal heat output : 11.5 ~ 33.0 kW Heat output : 9.7 ~ 30.0 kW Domestic useful thermal power: 30.0 kW Efficiency : 91 % Maximum production of domestic hot water Δt 25°C : 17.2 l/min Maximum production of domestic hot water Δt 30°C : 14.3 l/min Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 30.0 Kg Ferroli Divaproject Boiler Wall mounted boilers with instantaneous DHW production with double exchanger, open chamber, natural draft The Divaproject c24 by Ferroli is the cheapest solution for replacing open chamber boilers. Built to be installed outdoors in partially protected places and prepared for integration with a solar panel system. It has an excellent value for money and is entirely Made in Italy with a 2-year guarantee . The cheapest in its category Arrangement for solar systems Eco-comfort system for rapid domestic hot water production High efficiency low consumption circulator (class A) Ideal for residential homes up to 120 m2 2 Year Warranty Divaproject is a heat generator for heating and instant domestic hot water production. The series has been designed in each of its components to have top performance in its category while maintaining characteristics of simplicity and compactness. The control electronics allow for easy and functional combination with solar collector systems. The series includes two models: C24 and C30 The boiler is designed to operate on natural gas and LPG or even on propane air by means of a special transformation. The efficiency of Divaproject is the maximum for its category, certified at 3 stars according to the 92/42 EEC Directive for energy classification Components Expansion tank Combustion chamber Copper primary exchanger Atmospheric burner Sanitary exchanger Modulating gas valve Motorized 3-way valve Boiler control Control panel and functions Divaproject's control and management electronics allow the user to customize the operation of the appliance in order to manage environmental comfort according to one's needs. The control panel with adjustment knobs makes programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive Remote control "ROMEO" timer Divaproject boilers can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. The ROMEO series consists of 4 models, respectively with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With ROMEO you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. With solar systems Sun Easy function Divaproject boilers have been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously controls the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user Comfort and Safety Functions Eco-Comfort function In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Antifreeze function Even in stand-by mode, i.e. in the absence of a heat request, if a water temperature of 5°C is detected, it activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Post-circulation device All models are equipped with this particular timed device which allows, after the burner has been switched off in heating mode, to recover all the heat accumulated due to thermal inertia in the exchanger, transferring it to the radiators and therefore to the rooms to be heated Circulation anti-blocking device After 24 hours of inactivity, the boiler circulator is automatically started for about 5 seconds to prevent it from blocking after a long period of inactivity. Strengths > Compact geometry primary heat exchanger entirely in copper > Instant production of domestic hot water with dedicated plate exchanger > Simple and complete control panel, LED user interface > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system > Combustion chamber in anti-corrosion aluminized sheet, internally insulated with ecological fiber and burner in AISI 304 stainless steel > Can be combined with the modulating remote timer control > Casing painted white by anaphoresis with epoxy powders > Compact dimensions and low weight > Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor board > Adjustable post-circulation after the heating phase > ECO/COMFORT system for rapid production of domestic hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX URBIA GREEN Ebus2 25 EU CONDENSING BOILER Cod. 3310407, COMPLETE WITH FUME EXHAUST KIT - NEW ErP: Wall-mounted condensing boilers with 4 liter mini-accumulator. Technical specifications Product code: 3310407 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Rated heat output max/min (Hi) Qn:ÿ22/2,5ÿkW Useful heating power80§ C/ 60§ C max/minÿ21,5/2,4ÿkW Useful heating power50§ C/ 30§ C max/minÿ23,4/2,6ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ25/ 5.5 kW Efficiency at nominal heat input:ÿ97.8% Efficiency 30% of nominal heat input:ÿ109.1% Energy efficiency stars: (dir 92/42/EEC) **** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Port. specific in healthcare (10 min. with T= 30øC): 13.2 l/min Hot water flow rate at T 25§ C: 14.6 l/min Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ745 x 440 x 375ÿ; 42kg METHANE power supply Features list URBIA GREEN Ebus2 EU Urbia Green is the ideal solution for all homes where the best performance is required. It is a concentration of advantages in terms of sanitary comfort with reduced dimensions and consumption. Thanks to condensing technology and integration with solar systems, it maximizes energy savings and the 4-litre sanitary reserve satisfies the needs of the most demanding users. Sanitary comforts Mini-accumulintegrated in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard. Flow rate from 14.6 to 19.3 l/min with T = 25§C. DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very low. DHW programmer to control the tank heating time slots Eco-Delta System: DHW load system with 4 liter reserve to further improve the comfort of DHW production and new ecological functions which allow you to save energy in DHW mode. Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. SRA function, automatic boiler regulation system according to heating requirements. Modulation wide range, from 10% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. Pressure sensor of the heating circuit with visualization on LCD display. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature. Arrangement for integration into a heating system via the newÿEbus2 communication protocolÿ(boilers, solar, system management modules, modulating thermoregulation accessories). Multifunction LCD display with display: history, self-diagnosis, operating temperature. Filling taps integrated in the boiler. Convenience of installation use Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 25% energy savings in combination with Expert Control and the SRA function. Final 35% energy savings combine and Expert Control, the SRA function, the external probe and the radiant floor. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION FOR THE GAS TRANSFORMATION, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE BERETTA MYNUTE RAIN GREEN AND 25 CSI BOX CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Code: 20096647 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Sanitary nominal heat input: 25 kW Classification European Directive EEC 92/42: **** Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxlxp) mm 1223 x 654 x 255 + 26 Net weight of boiler + box kg 39+20 METHANE power supply C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Exclusive services: Beretta offers 5 or 10 years of peace of mind thanks to the Kasko warranty extension formulas. Standard: BeSMART Remote Control Panel and external probe in the BOX version (class A+) General characteristics 1) Mynute Rain Green E BOX - ErP The new Mynute Rain Green E outdoor range (down to -10°C with special kits), offers three models suitable for "wall" installation and a specific version for "recessed" installation. Designed following the ecodesign indications provided for by the European ErP Directive, it is made up of combined and heating only models. The boilers have a higher power in DHW operation thus offering greater comfort. Mynute Rain Green E is equipped with the new front access condensing exchanger which allows high yields (94% seasonal yield) and with the new low consumption modulating circulator which can be configured according to the type of system. Mynute Rain Green E is compatible with the optional BeSMART WiFi Comfort Control Kit which allows remote comfort control from smartphones and tablets using special free APPs and together they form a class A+ system. Mynute Rain Green E is compatible with the new Ø 50 mm flue with which it is possible to carry out ducting up to 49 m (25 CSI and 25 RSI versions). 2) Mynute Green E: high energy efficiency, reduced gas consumption and low emissions. The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries. 3) The new Beretta condenser exchanger with front access The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%. 4) Flex modulating circulators: optimized performance, low consumption Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature. Up to 49 meters of ducting With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. The simplicity of comfort The management, simple and intuitive, favors the understanding and use of all the functions. There are two control selectors for setting the adjustment functions: heating temperature selection knob and domestic hot water knob. Boiler status indications are shown on the display. The filling of the system is carried out simply thanks to the practical filling cock and the visible control hydrometer. [ 1 ] Digital display [ 2 ] Selector on/off/summer/winter/reset/heating temperature/activation of the Clima Amico system [ 3 ] Domestic hot water temperature selector/preheating activation [ 4 ] Hydrometer Characteristics: Class A+ system without the addition of options Specific for use in built-in BOX Low consumption modulating circulator (6 m head) Low polluting emissions: class 5 (UNI EN 483) New condensing exchanger in aluminum with high flow rate and front access Thermoregulation with standard external probe REC 08 remote control panel as standard Antifreeze kit available up to -10°C (optional) Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BAXI LUNA3 COMFORT IN HT SOLAR 240 B150 24 KW CONDENSING BUILT-IN BOILER WITH 150 LITERS TANK FOR SOLAR SUPPLEMENTATION - COMPLETE WITH FUME EXHAUST KIT Technical specifications BAXI LUNA3 COMFORT IN HT SOLAR 240 B150 24 kW BUILT-IN CONDENSING BOILER with 150 liter boiler for solar integration; Gas condensing boiler for heating and DHW production with wall-mounted thermal stratification tank for solar integration. SMOKE EXHAUST KIT INCLUDED IN THE PRICE! By Regional Resolution in the Lombardy and Piedmont regions only boilers with the NOx 5 characteristic can be installed Product code: HLZ71412891 Sanitary nominal heat inputkW 24.7 Heating nominal heat input kW 20.5 Sanitary nominal thermal powerkW 24 Nominal heat output 80/60øC kW 20ÿ Nominal heat output 50/30øC kW 21.6 Reduced thermal power heating 80/60øC kW 4 Reduced thermal power heating 50/30øC kW 4.3 Energetic efficiency(92/42/CEE)ÿ4 stars Average efficiency (DIN 4702-T8) % 109.8 Efficiency 30% % 107.5 NOx class (EN 483) 5 Minimum operating temperatureøC -15 Heating expansion vessel capacity/pre-charge l/bar 8/0.5 Capacity of solar expansion / pre-charge l 18/2.5 Boiler capacity l 150 Domestic hot water production continuously 25øC l/min 13.8 Maximum circuit water pressure bar 3 Maximum pressure of sanitary circuitbar 8 Solar circuit maximum water pressure bar 6 Maximum concentric exhaust-intake pipe length 60/100 m 10 Maximum length of the split exhaust-intake pipe 80 m 80 Smoke temperature maxøC 73 Dimensions (hxlxp) mm 2200x950x350 Pesnett (without case) kg 97 - 108 (MS) Rated electric power W 297/470 (MS) Degrees of protection IPX5D (*) When used, even for a short time, in places with particularly cold temperatures (below -5°C) it is advisable to install the antifreeze heater accessory kit. Main features LUNA3 COMFORT IN HT SOLAR Gas-fired condensing boilerÿfor heating and DHW productionÿwith wall-mounted thermal stratification tank for solar integration. Wide range of 1ú6 modulation, greater efficiency and silence Minimum operating temperature-15ø C * 120 and 150 liter boilers in AISI 316L stainless steel with thermal stratification Remote control with LCD display, with chronothermostat function, climate control unit supplied AS STANDARD Configurable for different types of mixed systems, management of several low temperature zones Automatic plant loading system Standard climate control (with optional external probe) Control unit, expansion tank and hydraulic groups for the solar system integrated in the boiler structure hydraulic system Electric three-way diverter valveÿ Premix burner in AISI 316Lÿ stainless steel Water/fumes exchanger in AISI 316L stainless steel with external coating in composite materialÿ Increased sanitary heat exchanger in AISI 316L stainless steel 120 and 150 liter thermal stratification boiler in AISI 316L stainless steel with solar integration via coil exchangerÿ Modulating fan with electronic speed variation Automatic by-pass Low consumption heating circuit circulation pump Built-in deaeratorÿ Pump anti-blocking system and three-way valve which intervenes every 24 hoursÿ Heating circuit safety valve 3 bar 8 bar cylinder safety valve Circulation pump for cylinderÿ Sanitary expansion tank as standardÿ Solar expansion vessel Solar hydraulic units (pump, safety valve, flow regulator, deaerator)ÿ Thermostatic mixing valve on the hot water outlet of the storage tank Predisposition for domestic hot water recirculation Thermoregulation system Solar controller (pump controller and two temperature probes)ÿ Standard climate control (with external probe available as an option)ÿ Arrangement for connection to a zone systemÿ Ambient probe, heating and sanitary programmer integrated in the control panel Control systemÿ Safety thermostat against overheating of the water/fumes exchangerÿ Hydraulic pressure switches which blocks the gas in case of water shortage NTC safety probe against fume overheatingÿ Controlltemperature through NTC probes Anti-legionella functionÿ Total gel devicesÿ Thermometer kettleÿ Termometreelectronicboiler Manometrcircuitheating Examples of integrated systemÿconsisting of a built-in condensing boiler with integrated thermal stratification tank set up to control an independent solar system. DHW annual requirement coverage 60% from solar integration. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX PIGMA GREEN 35 EU CONDENSING BOILER Cod. 3310401 - NEW ErP 2015, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: wall-mounted condensing boilers with microaccumulator. Technical specifications Product code: 3310401 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Heating maximum thermal power (DHW):ÿ30.2 (33.7)ÿkW Nominal heat output heatingÿmax/min (Hi) Q:ÿ31/7.0ÿkW Efficiency at nominal heat input:ÿ97.6% Efficiency 30% of nominal heat input:ÿ107.9% Sanitary comfort performance starsEN13203: *** Energy efficiency stars: (dir 92/42/EEC) **** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Port. specific in healthcare (10 min. with T= 30øC): 16 l/min Hot water flow rate at T 25§ C: 19.3 l/min Extremely compact dimensions hxwxd: mmÿ745 x 400 x 375 ; 35kg METHANE power supply Features list PIGMA GREEN Ebus2 EU Theÿcondensing rangeÿideal for replacement with the aim of improvingÿefficiency. The energy savings of condensing technology and the best sanitary comfort solutions, all concentrated in just 40 cm of intelligence. A complete range of accessories facilitates installation and use of advanced systems thanks also to the simplicity of integration with thermal solar systems Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard. Flow rate from 14.5 to 19.3 l/min with T = 25§C. Controlled DHW production managed by two probes and a sanitary flowmeter for better temperature stability based on the type of withdrawal. Programmable comfort function. Heating comfort Efficiencyfinal 109% with energy savingsfinal 35%. 4 star efficiency of combustion in compliance with the EN92/42 standard. Modulation range from 20% to 100% of maximum power. SRA function, automatic boiler regulation system according to heating requirements. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature. Arrangement for integration into a heating system via the new communication protocolÿEbus2ÿ (boilers, solar, system management modules, modulating thermoregulation accessories). Backlit LCD display with display: history, self-diagnosis, operating temperatures. Convenience of installation use Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier start-up: automatic purge function and directly accessible combustion adjustment. Can be installed in partially covered places. Save energy and respect the environment Final 25% energy savings in combination with Expert Control and the SRA function. Final 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less