MURAL Riello START 25 Kis LOW NOx condensing boiler complete with methane fume exhaust kit 20187404 Seasonal space heating efficiency class A Water heating energy efficiency class- A Rated power P rated kW 19 Seasonal space heating energy efficiency % 93 HEATING Nominal heat input: kW 20.00 Nominal thermal power (80÷60 °C) kW 19.38 Nominal thermal power (50÷30 °C) kW 20.92 Reduced heat input: kW 3.10 Reduced thermal power (80÷60 °C) kW 2.94 Reduced thermal power (50÷30 °C) kW 3.04 SANITARY Nominal heat input kW 25.00 Nominal thermal power kW 25.00 Reduced heat input kW 3.10 Reduced thermal power (*) kW 3.10 YIELDS Useful efficiency Pn max-Pn min (80°-60°) % 96.9 - 94.7 Useful efficiency Pn max-Pn min (50°-30°) % 104.6 - 98.0 Useful efficiency 30 % (return 30°C) % 109.1 Efficiency at average P Range Rated (80°-60°) % - 97.0 Performance at average P Range Rated 30% (30th return) % - 109.3 Combustion efficiency % 97.2 Chimney losses with burner on (Pn max) % 2.8 Chimney losses with burner off % 0.09 Shell losses with burner on (Pn max) % 0.3 FUMES EXHAUST Nox class - UNI EN 15502: 6 Residual head concentric pipes 0.85 m ø 60-100 mm Pa : 60 Residual head separate pipes 0.5 m ø 80 mm Pa : 180 Boiler residual head without pipes and without flange Pa 186 ELECTRICAL CHARACTERISTICS Electric power (Pel max heating - Pel max san.) W 62 - 95 Circulator electric power (1000 l/h) W 42 Supply voltage V - Hz 230-50 IP X5D degree of protection HEATING EXERCISE Maximum pressure bar 3 Minimum pressure for standard operation 0.25 bar Maximum temperature 90 °C Pump: max head available to the system mbar 408 at a flow rate of 1000 l/h Membrane expansion tank l 8 Expansion tank preload bar 1 HEALTHCARE EXERCISE - INSTANT VERSION Maximum pressure bar - 8 Minimum pressure bar - 0.5 Quantity of hot water at ?t 25°C l/min - 14.3 with ?t 30°C l/min - 11.9 with ?t 35°C l/min - 10.2 Minimum domestic water flow rate l/min - 2 Sanitary H2O temperature selection field. °C - 37/60 Flow regulator l/min – 10 New Start START is the new proposal, completely renewed from a technological and functional point of view, of Riello condensing boilers for small and medium-sized domestic users. START is available in 3 sizes 15, 25, 30 kW, in combined (KIS) and heating only (IS) versions. One of the distinctive features of the new START is the innovative digital control panel with touch keys designed with particular attention to ease of use. High efficiency sanitary exchanger developed by Riello Modern and intuitive touchscreen HMI, with representative icons and capacitive keys with acoustic "buzzer" sound Modern and linear design with under-boiler connection cover available as an accessory for excellent aesthetic integration Specific DHW electronic functions: DHW delay, anti-short cycle function and smart fan Hydraulic unit with DIN standard sequence Low consumption circulator (IEE?0.20) 7 m with high head available as an accessory Ease of installation, integration even in confined spaces and replacement thanks to the wide choice of accessories available as optionals Modulation ratio 1:8 Easy maintenance and cleaning of the combustion chamber thanks to the front access to the exchanger – Seasonal efficiency 93% 8-litre side expansion tank Standard flue gas flange with dedicated flue system Standard thermoregulation in combination with the external probe, available as an accessory Possibility of recessed installation (model 25 KIS and 30 KIS) and outdoors in partially protected places (IPX5D) Assembly crosspiece already integrated in the boiler and power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air using accessories. This modification is the responsibility of the installer or the technical assistance service. IPX5D electrical protection degree. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€800,00
Beretta CIAO AT 25 C LOW NOx condensing boiler Complete with Fume Kit 20176935 - NEW Technical specifications according to ErP directives Class B heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile - XL Technical features: Nominal heat input kW 25.00 NOx Class 6.00 Total electrical power Watt 102.00 IP electrical protection degree IPX5D Expansion vessel capacity 8 litres Maximum pressure bar 8 Quantity of hot water with Δt=25°C litres/min 14.3 Dimensions Boiler size (HxLxP) mm 715x405x250 CIAO AT with stainless steel heat exchanger BERETTA PRESENTS THE NEW CIAO AT, THE SPECIFIC CONDENSING BOILER FOR REPLACING TRADITIONAL HIGH TEMPERATURE SYSTEMS The new CIAO AT range is proposed in two combined models of 25 kW of power, with methane and LPG respectively. Both models are equipped with DIN standard hydraulic connections, to allow easy replacement of boilers with hydraulic standards other than Beretta. Many new features compared to the previous range. First of all, the new post-exchanger in stainless steel and composite material, which allows it to pre-heat the return water from the primary circuit using the residual heat of the exhaust fumes. The cooled burner, the new electronics and interface, the reduced depth of the boiler which allows installation even in contained recesses, complete the innovative profile of this product, which is preparing to become the reference in the specific segment of the replacement of radiator systems . The simple and linear design, in line with the Beretta style, the compactness of the dimensions and the installation flexibility make CIAO AT easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or recessed, also through dedicated accessories. The Technical Characteristics New layout with compact dimensions and low weight (only 31 kg!) to facilitate transport and built-in installation Traditional copper primary exchanger New and robust finned pack post-exchanger in stainless steel with taste and composite material Sanitary plate heat exchanger with possibility of pre-heating Innovative gas-air combustion supervision system Forced draft sealed chamber boiler with cooled low NOx burner Standard automatic by-pass Modulation range 1:3 Low consumption circulator (EEI ≤ 0.20), 6 m, with anti-blocking Standard analogue hydrometer Low NOx emissions : CLASS 6 (EN 15502-1) Innovative gas valve regulation procedure Sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Maximum installation flexibility: Indoor, outdoor and recessed installation (in a partially protected place) Antifreeze heater kit, hydraulic connections and external probe available as accessories New flue flange with click fit connection: Fast and safe, without the need for an external collar IPX5D electrical protection degree Boiler support template supplied Compatible with BeSmart command Thermostat Dedicated LPG code: for conversion, contact authorized Beretta assistance centres LOW NOX BURNER CIAO AT is able to satisfy the most demanding requirements in terms of low emissions, in order to make heating appliances less polluting. Thanks to the innovative burner of CIAO AT, of the hyperstoichiometric type, a very low flame temperature is obtained as an effect. This characteristic, combined with the cooling of the burner through the heating circuit water, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors ( EU Regulation 814/2013). NEW INTERFACE The new CIAO AT digital interface, designed with particular attention to ease of use, is equipped with a modern backlit display that allows immediate and complete reading of the information on the operating status of the machine, both for the user and for the installer or maintenance technician. Through six intuitively functional keys it is possible to easily adjust both the temperature in heating and DHW, and access the configuration of the machine parameters, rather than resetting the alarm states. UNIVERSAL INSTALLATION Ciao AT is designed to also be installed outdoors in partially protected places or contained recesses (e.g. Edilbox Beretta), thanks to the board's anti-freeze protection down to 0°C. In colder temperatures it is possible to extend the protection down to -10°C using the special antifreeze heater kit. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€693,00
MURAL Riello START 30 Kis LOW NOx condensing boiler cod. 20187407 complete with methane fume exhaust kit Seasonal space heating efficiency class A Water heating energy efficiency class- A Rated power P rated kW 19 Seasonal space heating energy efficiency % 93 HEATING Nominal heat input: kW 20.00 Nominal thermal power (80÷60 °C) kW 24.38 Nominal thermal power (50÷30 °C) kW 26.78 Reduced heat input: kW 3.95 Reduced thermal power (80÷60 °C) kW 3.79 Reduced thermal power (50÷30 °C) kW 4.09 SANITARY Nominal heat input kW 30.00 Nominal thermal power kW 30.00 Reduced heat input kW 3.95 Reduced thermal power (*) kW 3.95 YIELDS Useful efficiency Pn max-Pn min (80°-60°) % 97.5 - 96.0 Useful efficiency Pn max-Pn min (50°-30°) % 107.1 - 103.6 Useful efficiency 30% (return 30°C) % 108.8 Efficiency at average P Range Rated (80°-60°) % - 97.3 Performance at average P Range Rated 30% (30th return) % - 109.0 Combustion efficiency % 97.7 Chimney losses with burner on (Pn max) % 2.3 Losses in the chimney with the burner off % 0.08 Shell losses with burner on (Pn max) % 0.2 FUMES EXHAUST Nox class - UNI EN 15502: 6 Residual head concentric pipes 0.85 m ø 60-100 mm Pa : 60 Residual head separate pipes 0.5 m ø 80 mm Pa : 190 Boiler residual head without pipes and without flange Pa 196 ELECTRICAL CHARACTERISTICS Electric power (Pel max heating - Pel max san.) W 85 - 102 Circulator electric power (1000 l/h) W 42 Supply voltage V - Hz 230-50 IP X5D degree of protection HEATING EXERCISE Maximum pressure bar 3 Minimum pressure for standard operation 0.25 bar Maximum temperature 90 °C Pump: max head available to the system mbar 408 at a flow rate of 1000 l/h Membrane expansion tank l 8 Expansion tank preload bar 1 HEALTHCARE EXERCISE - INSTANT VERSION Maximum pressure bar - 8 Minimum pressure bar - 0.5 Quantity of hot water at ?t 25°C l/min - 17.2 with ?deltat 30°C l/min 14.3 with deltat 35°C l/min - 12.3 Minimum domestic water flow rate l/min - 2 Sanitary H2O temperature selection field. °C - 37/60 Flow regulator l/min – 12 New Start START is the new proposal, completely renewed from a technological and functional point of view, of Riello condensing boilers for small and medium-sized domestic users. START is available in 3 sizes 15, 25, 30 kW, in combined (KIS) and heating only (IS) versions. One of the distinctive features of the new START is the innovative digital control panel with touch keys designed with particular attention to ease of use. High efficiency sanitary exchanger developed by Riello Modern and intuitive touchscreen HMI, with representative icons and capacitive keys with acoustic "buzzer" sound Modern and linear design with under-boiler connection cover available as an accessory for excellent aesthetic integration Specific DHW electronic functions: DHW delay, anti-short cycle function and smart fan Hydraulic unit with DIN standard sequence Low consumption circulator (IEE?0.20) 7 m with high head available as an accessory Ease of installation, integration even in confined spaces and replacement thanks to the wide choice of accessories available as optionals Modulation ratio 1:8 Easy maintenance and cleaning of the combustion chamber thanks to the front access to the exchanger – Seasonal efficiency 93% 8-litre side expansion tank Standard flue gas flange with dedicated flue system Standard thermoregulation in combination with the external probe, available as an accessory Possibility of recessed installation (model 25 KIS and 30 KIS) and outdoors in partially protected places (IPX5D) Assembly crosspiece already integrated in the boiler and power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air using accessories. This modification is the responsibility of the installer or the technical assistance service. IPX5D electrical protection degree. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€902,00
Beretta CIAO AT 25 C LOW NOx condensing boiler Complete with Fume Kit 20176941 LPG - NEW Technical specifications according to ErP directives Class B heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile - XL Technical features: Nominal heat input kW 25.00 NOx Class 6.00 Total electrical power Watt 102.00 IP electrical protection degree IPX5D Expansion vessel capacity 8 litres Maximum pressure bar 8 Quantity of hot water with Δt=25°C litres/min 14.3 Dimensions Boiler size (HxLxP) mm 715x405x250 CIAO AT with stainless steel heat exchanger BERETTA PRESENTS THE NEW CIAO AT, THE SPECIFIC CONDENSING BOILER FOR REPLACING TRADITIONAL HIGH TEMPERATURE SYSTEMS The new CIAO AT range is proposed in two combined models of 25 kW of power, with methane and LPG respectively. Both models are equipped with DIN standard hydraulic connections, to allow easy replacement of boilers with hydraulic standards other than Beretta. Many new features compared to the previous range. First of all, the new post-exchanger in stainless steel and composite material, which allows it to pre-heat the return water from the primary circuit using the residual heat of the exhaust fumes. The cooled burner, the new electronics and interface, the reduced depth of the boiler which allows installation even in contained recesses, complete the innovative profile of this product, which is preparing to become the reference in the specific segment of the replacement of radiator systems . The simple and linear design, in line with the Beretta style, the compactness of the dimensions and the installation flexibility make CIAO AT easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or recessed, also through dedicated accessories. The Technical Characteristics New layout with compact dimensions and low weight (only 31 kg!) to facilitate transport and built-in installation Traditional copper primary exchanger New and robust finned pack post-exchanger in stainless steel with taste and composite material Sanitary plate heat exchanger with possibility of pre-heating Innovative gas-air combustion supervision system Forced draft sealed chamber boiler with cooled low NOx burner Standard automatic by-pass Modulation range 1:3 Low consumption circulator (EEI ≤ 0.20), 6 m, with anti-blocking Standard analogue hydrometer Low NOx emissions : CLASS 6 (EN 15502-1) Innovative gas valve regulation procedure Sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Maximum installation flexibility: Indoor, outdoor and recessed installation (in a partially protected place) Antifreeze heater kit, hydraulic connections and external probe available as accessories New flue flange with click fit connection: Fast and safe, without the need for an external collar IPX5D electrical protection degree Boiler support template supplied Compatible with BeSmart command Thermostat LOW NOX BURNER CIAO AT is able to satisfy the most demanding requirements in terms of low emissions, in order to make heating appliances less polluting. Thanks to the innovative burner of CIAO AT, of the hyperstoichiometric type, a very low flame temperature is obtained as an effect. This characteristic, combined with the cooling of the burner through the heating circuit water, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors ( EU Regulation 814/2013). NEW INTERFACE The new CIAO AT digital interface, designed with particular attention to ease of use, is equipped with a modern backlit display that allows immediate and complete reading of the information on the operating status of the machine, both for the user and for the installer or maintenance technician. Through six intuitively functional keys it is possible to easily adjust both the temperature in heating and DHW, and access the configuration of the machine parameters, rather than resetting the alarm states. UNIVERSAL INSTALLATION Ciao AT is designed to also be installed outdoors in partially protected places or contained recesses (e.g. Edilbox Beretta), thanks to the board's anti-freeze protection down to 0°C. In colder temperatures it is possible to extend the protection down to -10°C using the special antifreeze heater kit. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€670,00
LA CALDAIA NON PUÒ ESSERE INSTALLATA IN LOMBARDIA E IN PIEMONTE IN QUANTO È SEMICONDENSAZIONE. ErP - Classe energetica Classe di efficienza in riscaldamento B Classe di efficienza in sanitario A Profilo di carico sanitario XL N° identificativo CE PIN CE 0476CQ0908 Riscaldamento Portata al focolare Qmin/max - 80/60°C kW 13,0/24,0 Potenza nominale Pmin/max - 80/60°C kW 12,5/23,04 Potenza nominale Pmin/max - 50/30°C kW - Rendimento Pmax - 80/60°C - 50/30°C % 96,0 / - Rendimento P30% - 40/30°C % 99,7 Perdite mantello - Bruc. On - 80/60°C Pmax/Pmin % 0,1/2,3 Perdite camino - Bruc. On - 80/60°C Pmax/Pmin % 2,2/1,9 Perdite camino - Bruc. Off - risc./sanitario % 0,3/0,7 Temp. mandata min/max °C 30/85 Pressione esercizio caldaia min/max bar 0,3/3 Vaso espansione risc. - Capacita/precarica l/bar 7/0,75 Sanitario Tipologia produzione acqua calda sanitaria Istantanea Classificazione qualita ACS (EN 13203-1) stelle 2 Portata al focolare min/max - 60°C kW 13,0/24,0 Potenza nominale min/max - 60°C kW 12,3/23,2 Portata continua (∆T= 25K) l/m 13,8 Portata specifica (∆T = 30K) (EN13203) l/m 11,4 Portata di picco in 10 minuti (∆T = 30K) l/10 min 114 Temperatura ACS min/max °C 35/65 Dispersione termica accumulo sanitario kWh/24h - Pressione alimentazione min/max bar -/8 Generali Categoria gas II2H Pressione alimentazione mbar 20 Portata gas risc. Pmin/Pmax m3/h 2,66 Portata gas in sanitario Pmax m3/h 2,66 Tensione/frequenza/Intensita V/Hz/A 230/50/0,66 Assorbimento - Picco/Pmax/Pmin/Stand-by W - / - / 60 / - Temp. fumi risc. (50-30°C) Pmin °C 51 Temp. fumi sanit. (T ACS=50°C) Pmax °C 68 Gas combusti risc. Pmin/Pmax g/s - CO2 Pmax % 7 NOx ponderato (0% O2) mg/kWh 56,0 Prevalenza Residua al ventilatore Pa - Protezione elettrica IPX 4D Peso kg 38 Dimensioni 70 cm di altezza, 40 di larghezza e 29.5 di profondità (24 kW) THEMIS CONDENS Low NOx - NOVITA' Caldaia murale a condensazione per riscaldamento e acqua calda sanitaria, per impianti ad alta temperatura. La nuova Themis Condens Low NOx è la soluzione a condensazione sviluppata da Hermann Saunier Duval sviluppata per la sostituzione di caldaie murali tradizionali abbinate a termosifoni che necessitano di elevati valori di temperatura in ingresso. La principale novità è il bruciatore a basse emissioni di NOx (classe 6) che permette di adempiere alle normative ErP in vigore da novembre 2018 nell'UE. La caldaia, che presenta un rinnovato casing, è progettata per consentire un'agevole installazione e la massima facilità di gestione, vantando una nuova interfaccia utente estremamente intuitiva. Themis Condens Low NOx abbina la semplicità della caldaia tradizionale all’efficienza delle caldaie a condensazione, garantendo il giusto comfort sia in riscaldamento che in produzione di acqua calda sanitaria. È disponibile in un unico modello con alimentazione a metano, potenza pari a 24 kW sia in riscaldamento che in sanitario.Themis Condens Low NOx è una caldaia pensata specificamente per impianti ad alta temperatura. E’ stata sviluppata per dare il giusto comfort, sia per la produzione di acqua sanitaria che per fornire il clima ideale negli ambienti. Themis Condens low NOx unisce la semplicità della caldaia tradizionale all’efficienza delle caldaie a condensazione. La gamma è composta da un solo modello con produzione combinata di acqua calda sanitaria e riscaldamento, è disponibile nella sola alimentazione a metano. Caldaia a condensazione con un nuovo bruciatore atmosferico a tiraggio forzato studiato e progettato per avere basse emissioni di NOx, scambiatore tradizionale in rame protetto con una speciale vernice in alluminio e post-condensatore in alluminio. La caldaia monta una nuova pompa ad alta efficienza con elevate prestazioni ed un vaso espansione da 7 litri. Nuovo bruciatore a basse emissioni Nox (classe 6) Progettata per la sostituzione in impianti ad alta temperatura Nuovo casing con dimensioni ridotte Pompa ad alta efficienza Nuova interfaccia utente semplice e intuitiva Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€630,00
Caldaia Riello START 25 Kis LOW NOx a condensazione completa di kit scarico fumi GPL 20187772 Classe di efficienza stagionale del riscaldamento d'ambiente A Classe di efficienza energetica di riscaldamento dell'acqua- A Potenza nominale P nominale kW 19 Efficienza energetica stagionale del riscaldamento d'ambiente % 93 RISCALDAMENTO Portata termica nominale :kW 20,00 Potenza termica nominale (80÷60 °C) kW 19,38 Potenza termica nominale (50÷30 °C) kW 20,92 Portata termica ridotta : kW 3,10 Potenza termica ridotta (80÷60 °C) kW 2,94 Potenza termica ridotta (50÷30 °C) kW 3,04 SANITARIO Portata termica nominale kW 25,00 Potenza termica nominale kW 25,00 Portata termica ridotta kW 3,10 Potenza termica ridotta (*) kW 3,10 RENDIMENTI Rendimento utile Pn max-Pn min (80°-60°) % 96,9 - 94,7 Rendimento utile Pn max-Pn min (50°-30°) % 104,6 - 98,0 Rendimento utile 30 % (ritorno 30°C) % 109,1 Rendimento di combustione % 97,2 SCARICO FUMI Classe Nox - UNI EN 15502: 6 CARATTERISTICHE ELETTRICHE Potenza elettrica (Pel max risc.- Pel max san.) W 62 - 95 Potenza elettrica circolatore (1000 l/h) W 42 Tensione di alimentazione V - Hz 230-50 Grado di protezione IP X5D ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Pressione minima per il funzionamento standard bar 0,25 Temperatura massima °C 90 Pompa: prevalenza max disponibile all'impianto mbar 408 alla portata di l/h 1000 Vaso di espansione a membrana l 8 Precarica vaso di espansione bar 1 ESERCIZIO SANITARIO - VERSIONE ISTANTANEA Pressione massima bar - 8 Pressione minima bar - 0,5 Quantità di acqua calda con ?t 25°C l/min - 14,3 Portata minima acqua sanitaria l/min - 2 Campo di selezione della temperatura H2O san. °C - 37/60 Dimensioni AxLxP mm 700x400x275 Nuova Start START è la nuova proposta, completamente rinnovata dal punto di vista tecnologico e funzionale, di caldaie a condenazione Riello per utenze domestiche di piccole e medie dimensioni. START è disponibile in 3 taglie 15, 25, 30 kW, in versioni combinate (KIS) e solo riscaldamento (IS). Una delle caratteristiche distintive della nuova START è l’innovativo pannello comandi digitale con tasti touch progettato con una particolare attenzione alla facilità di utilizzo. Scambiatore sanitario ad alta efficienza sviluppato da Riello HMI touchscreen moderna e intuitiva, con icone rappresentative e tasti capacitivi con suono acustico “buzzer” Design moderno e lineare con copertura raccordi inferiori sotto-caldaia disponibile come accessorio per un'ottima integrazione estetica Funzioni elettroniche specifiche sanitarie: ritardo sanitario, funzione anti-pendolazione e ventilatore smart Gruppo idraulico con sequenza a standard DIN Circolatore basso consumo (IEE?0,20) 7 m ad alta prevalenza disponibile come accessorio Facilità di installazione, integrazione anche in spazi contenuti e sostituzione grazie all'ampia ampia scelta di accessori disponibili come optional Rapporto di modulazione 1:8 Facile manutenzione e pulizia della camera di combustione grazie all'accesso frontale allo scambiatore – Efficienza stagionale 93% Vaso espansione laterale da 8 litri Flangia fumi di serie con fumisteria dedicata Termoregolazione di serie in abbinamento alla sonda esterna, disponibile come accessorio Possibilità di installazione anche ad incasso (modello 25 KIS e 30 KIS) ed all'esterno in luoghi parzialmente protetti (IPX5D) Traversa di montaggio già integrata in caldaia e cavo di alimentazione elettrica a corredo Funzionamento a metano di serie con possibilità di trasformazione a GPL (G31) e aria propanata tramite accessori. Tale modifica è a cura dell'istallatore o del servizio tecnico di assistenza. Grado di protezione elettrica IPX5D. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€800,00
Immergas MYTHOS HP 24 kW LPG condensing boiler complete with low NOx fume exhaust kit 3.029801 Wi-Fi Natural gas boiler code 3.029801 Energy class in heating B Sanitary energy class - Load profile A - XL Maximum nominal heat input in domestic hot water kW (kcal/h) 23.8 (20,502) Maximum nominal heat input in heating kW (kcal/h) 23.8 (20,502) Minimum nominal heat input kW (kcal/h) 9.8 (8,423) Maximum useful thermal power in domestic hot water kW (kcal/h) 22.6 (19,436) Maximum useful heat output in heating kW (kcal/h) 22.6 (19,436) Minimum useful heat output kW (kcal/h) 9.1 (7,826) Useful thermal efficiency at 100% Pn (80 / 60 °C) % 94.8 Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) % 94.7 Useful thermal efficiency at 100% Pn (40 / 30 °C) % 102.3 Useful thermal efficiency at 30% of the nominal load. (40 / 30 °C) % 100.5 Gas flow rate to the burner (methane) max/min m3 Heating expansion tank nominal capacity (total) liters 4.2 IPX 5D electrical protection degree Boiler weight full of water (empty) Kg 32.8 (30.8) Dimensions (HxWxD) mm786 x 440 x 240 Mythos HP Instant mural with heat recovery The new entry in the Immergas condensing range is specifically designed to replace traditional boilers in radiator systems, with medium-high temperatures. MYTHOS HP is designed to meet the new European Directives on the use of energy, in fact it has a traditional copper exchanger and a heat recovery unit with condensate drain siphon. It develops 24 kW of power for room heating and the instantaneous production of domestic hot water and, thanks to the reduced emissions of nitrogen oxides (NOx), it falls into class 6, the most ecological of European standards. In addition, it allows fumes to be discharged through the wall in the cases envisaged by Legislative Decree 102 of 4 July 2014. It is also the ideal boiler for replacing conventional sealed chamber and forced draft boilers connected to collective flues. MYTHOS HP is extremely compact, it finds space even in homes with limited space, it can be installed outdoors in a partially protected place or recessed in OMNI CONTAINER. The simple and essential interface consists of a central LCD display and selection buttons to adjust temperatures and operating modes. SMARTECH PLUS. CONTROL THE BOILERS REMOTELY AND SAVE The SMART hi-tech wireless chronothermostat with Bluetooth technology allows you to adjust the heating temperature even with a smartphone or tablet via a dedicated app. The switching on or off of the heating can be based, through a special function, on the geolocation of family members: the app raises the temperature when a member of the family returns home and lowers it when the last one leaves. With the app you can manage up to 18 SMART thermostats even in different homes. SMARTECH PLUS is easy to use and reads well from any angle thanks to the e-ink technology used in digital readers. It is also compatible, for some functions, with the virtual assistants Alexa and Google Home . THE ADVANTAGES OF SMARTECH PLUS Heating adjustment in time slots with the display or remotely with the dedicated app (internet connection or Wi-Fi required) Switching on and off at time slots or with the geolocation of family members on the app Control of operation, consumption, modification of parameters and display of anomalies on the website Very low consumption: it runs on batteries with an autonomy of up to more than 2 years High readability with e-ink display ê Control up to 18 SMART thermostats in different homes, via app MYTHOS HP is equipped with a copper exchanger connected to the high efficiency condensing element (heat recovery) and to a low polluting emission burner. The heat recovery unit, located downstream of the copper exchanger, is completely made of stainless steel to guarantee durability over time and maximum efficiency. It represents the condensing solution, in case of replacement of traditional generators on radiator systems that require medium-high temperatures to ensure environmental comfort. MYTHOS HP cannot be installed with direct delivery to low temperature radiant panel systems : it is necessary to provide for an external mixing to the generator. INDOOR AND OUTDOOR INSTALLATION The boiler is approved for operation outside the home as long as it is partially protected from atmospheric agents, for example by installing it under a balcony; the degree of electrical protection is IPX5D. An electric resistance kit is available to increase the antifreeze protection from -5 °C to -15 °C (code 3.031016). The upper cover kit for installation in partially protected places is optional (code 3.019090). OPTIONAL CONNECTION GROUP FOR PENDANT INSTALLATION Pendant connection group cod. 3.015229 RECESSED INSTALLATION The built-in installation allows the boiler to be positioned outside in a niche and therefore to recover living space. The OMNI CONTAINER frame cod. 3.016991 can be supplied and installed before the boiler. The front door can also be painted the same color as the house so as to fit nicely into the aesthetics of the building. OPTIONAL CONNECTION GROUP FOR BUILT-IN INSTALLATION front and rear connection group cod. 3.016445 CARV2 (MODULATING REMOTE FRIEND COMMAND) OPTIONAL It is possible to remotely control the appliance using a modulating thermostat with remote boiler controls (optional, see page 10) which allows better climatic regulation of the room temperature. In fact, it replaces the control panel of the boiler, performing all its functions. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€870,00
Traditional Sealed Chamber Sime Boiler mod. UNIQA REVOLUTION 24 kW LOW NOx complete with fume exhaust kit - ErP Nominal thermal power (80-60°C) kW 22.9 Minimum thermal power (80-60°C) kW 8.9 Nominal heat input in heating kW 24.5 Minimum heat input kW 10.0 Rated power efficiency (80-60°C) % 93.4 Useful efficiency minimum power (80-60°C) % 89.2 Useful efficiency 30% of load % 108.8 Heating energy efficiency class B Sanitary energy efficiency class A Seasonal heating energy efficiency % 86 XL loading sanitary profile Heating sound power dB(A) 54 Maximum electrical power absorbed W 450 Electrical protection degree IP X5D Heating regulation range °C 40÷80 Boiler water content l 3.35 Max working pressure bar 3 Max operating temperature °C 85 Expansion tank capacity l 8 Expansion vessel pressure bar 1 DHW adjustment range °C 10÷60 DHW heat input kW 24.5 Specific sanitary flow rate ∆t 30°C (EN 13203) l/min 10.6 Continuous DHW flow ∆t 25/35°C l/min 12.9/9.2 Sanitary minimum flow rate l/min 2 Sanitary pressure (max/min) bar 7.0/0.5 Smoke temperature max °C 106 Flue gas temperature min °C 75 Maximum straight length ø 60/100* m 2.5 Maximum straight length separated* m 10+10 NOx class 6 (‹ 56 mg/kWh) Weight kg 45 UNIQUE REVOLUTION Instantaneous wall mounted boiler with active recuperator Equipped with active heat pump recovery It does not require a condensate drain It is installed with a traditional flue Specific for the replacement of traditional sealed chamber boilers The boiler is equipped with a card that can perform one of the following functions: remote alarm, zone valve control via room thermostat or remote control, boiler loading, recirculation or booster pump control A UNIQUE, INGENIOUS SOLUTION The European ErP regulation has changed the rules of the game, defining the minimum requirements to be met for products for space heating and domestic hot water production, in order to significantly reduce CO2 emissions by 2020. According to this regulation, traditional boilers (non-condensing) sealed chamber boilers can no longer be placed on the market starting from September 2015. In this scenario, Sime proposes Uniqa Revolution, the class B boiler, which already complies with the polluting limits of September 2018 and is installed like a boiler traditional, because it does not require flue ducting and condensate drainage. Specific for the replacement of traditional sealed chamber boilers It does not require a condensate drain Use traditional flue Equipped with internal heat pump booster THE BOILER THAT SOLVES THE PROBLEM Replacing a traditional boiler with a condensing one can be particularly expensive because it requires the creation of a condensate drain and, in some cases, the ducting of the existing flue, which is not suitable for low temperature fumes. The costs of these interventions are significant and are added to those of the purchase and installation of the generator. Uniqa Revolution is the only product that is installed like a traditional boiler, while meeting the stringent Ecodesign requirements of the ErP legislation. Uniqa Revolution is equipped with an active recuperator (booster) which raises the efficiency in compliance with ErP requirements. The heat transfer fluid receives heat from the air drawn from the outside and conveyed to the 1st active recovery exchanger. Subsequently, the active recovery exchanger compresses the fluid and transfers the heat to the heating system return water in the 2nd active recovery exchanger. The water then passes through the low NOx burner, reheating further and subsequently into the boiler exchanger. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.309,00
ATTENTION ! The boiler will be supplied with methane, for LPG operation you must contact your local Authorized Assistance Centre. Technical features Model : Divacondens D Plus Nominal thermal power: 24 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: B Seasonal Space Heating Energy Efficiency : 89% Performance Heating Thermal Capacity : 7,5 ~ 25,0 kW Heating Thermal Power: 7.2 ~ 24.2 kW Ultimate Thermal Efficiency 30% Pmin : 100.1% Domestic Hot Water Production 25°C Δt 30°C : 13,9 ~ 11,6 l/min NOx emissions 6 Dimensions and weight Dimensions (LxHxP): 400x700x330 mm Weight : 35Kg Ferroli Divacondens D Plus Boiler The Simplest Solution For A Condensing Boiler DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. The Range Divacondens D Plus is offered in a single model for heating and instantaneous production of domestic hot water Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages. > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Place of installation: also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. The performances Energy classification DHW load profile (maximum flow rate at the corresponding efficiency declared in DHW) Efficiency in the production of domestic hot water FOR COMBINED BOILERS The "climate-energy 20/20/20" package sets ambitious targets for the reduction of greenhouse gas emissions, of energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context, the European regulation ErP (Energy Related Products) introduces an energy classification also for water generators hot water for space heating and domestic hot water purposes. This classification translates into an energy label which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the product more efficient. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which, in the case of the single boiler product, ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the DHW flow rate of the appliance measured in a series of typical samplings, guaranteeing at least the declared DHW efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€580,00
FERROLI DIVACONDENS D F24 METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT-NEW ERP Technical features Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max heat input kW 25.8 Nominal thermal power Pn kW 24 Efficiency Pmax (80/60°C) % 96.5 Yield 30% % 103.5 Directive efficiency class 92/42 EEC **** Max heating / sanitary operating pressure. bars 3 / 9 Max heating temperature 90 °C Heating water content liters 1.5 Heating expansion tank capacity 8 litres Exp. vessel preload pressure heating bar 1 Sanitary water content 0.3 litres Sanitary flow rate ∆t 25°C l/min 14.0 Sanitary flow rate ∆t 30°C l/min 11.6 IP X5D degree of protection Electric power absorbed W 95 Extremely compact dimensions (LxHxP): mm 400x700x330; 35kg Sound power level LWA dB 57 NOx class 3 Power supply: METHANE DIVA CONDENS D DIVACONDENS D is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes. The quality of the DIVACONDENS line is unquestionable, and Ferroli is ready to put it to the test by offering its customers an extended warranty coverage with the "5 years worry-free" formula which also ensures periodic maintenance and legal checks. Range Divacondens D is available in two models for heating and instantaneous production of domestic hot water forced draft boiler and sealed chamber mod. F 24 - MAXIMUM THERMAL CAPACITY 25.0 kW mod. F 28 - MAXIMUM THERMAL CAPACITY 28.0 kW Strengths: Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels Compact geometry primary heat exchanger entirely in copper Instant production of domestic hot water with dedicated plate exchanger Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit Forced draught sealed chamber boiler, with AISI 304 stainless steel atmospheric burner Standard hydraulic by-pass High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity Can be combined with the modulating remote timer control Simple and complete control panel, display user interface, with setting keys Advantages of Divacondens D: Robust post-condenser powered by the closed circuit of the primary circuit, i.e. without the inlet of external mains water. The heat exchange with the fumes takes place inside large diameter water passages. Generator with simple and rational operation Condensate collection device to protect the air pressure switch, for regular combustion even in the presence of very cold external temperatures ECO function in DHW for greater savings in the period of low use of hot water Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place down to -5°C as standard Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. Functions: ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The DIVACONDENS D electronic board adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite CONTROL UNIT The DIVACONDENS D control unit consists of an easy to use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. COMBINABLE WITH THE ROMEO CHRONO CONTROL: The Romeo chrono control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. Romeo is available with wired or wireless connection. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€575,00 - €580,00
LPG operation with the use of a special conversion kit to be requested from the Authorized Assistance Centre, we recommend contacting the local assistance center before purchasing Technical features Model : Divacondens D Plus F24 Power supply: LPG Energy efficiency Heating energy efficiency class: B Sanitary energy efficiency class: A ACS profile : XL Performance Heat output : 7.5 ~ 25.0 kW Thermal power 80°C ~ 60°C : 7.2 ~ 24.2 kW Thermal power 50°C ~ 30°C : 7.7 ~ 26.2 kW Useful thermal efficiency 80°C ~ 60°C : 96.0% ~ 96.9% Useful thermal efficiency 50°C ~ 30°C : 102.4~ 104.0% NOx emissions : 6 Maximum production of domestic hot water Δt 25°C : 13.9 l/min Maximum production of domestic hot water Δt 30°C : 11.6 l/min Heating working pressure: 0.8 ~ 3 bar Sanitary operating pressure: 9 bar Dimensions and weight Dimensions (LxHxP): 400x680x330 mm Empty weight: 35.0 kg 5 years without worries Extension of the manufacturer's standard warranty to 5 YEARS on Ferroli brand gas condensing boilers of less than 35 kW in the DIVACONDENS and BLUEHELIX series through the local authorized Ferroli technical assistance centre. Wall-mounted boiler Ferroli DIVACONDENS D PLUS Atmospheric wall-mounted condensing boilers, with instantaneous domestic hot water production The simplest solution for a condensing boiler DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. DIVACONDENS D PLUS is offered in a single model for heating and instantaneous production of domestic hot water Product plus > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions, class 6 according to EN 15502-1 > High-efficiency, low-consumption circulator with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Place of installation : also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. Main components Heat recovery Post-condenser with recovery of latent heat from the combustion fumes and condensate discharge Steel frame Made with high precision automated processes. Incorporates an 8 liter expansion vessel Central heating primary exchanger protected by a non-toxic aluminum coating Low NOx burner Water-cooled low temperature micro flame type. Minimum NOx emissions High efficiency circulator , for heating and exchange with the DHW circuit Domestic hot water exchanger In stainless steel, with copper brazing ECS - Evolved Combustion System Innovative combustion control that guarantees optimal functioning under various thermal load conditions and types of chimney Optimize comfort and savings "ROMEO N" timer control The ROMEO N timer control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. ROMEO N is available with wired or wireless connection. With ROMEO N you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the indoor temperature in your home Program the weekly ambient comfort Activating/deactivating the heating function via the telephone (Optional) Smart CONNECT remote control Remote control supplied with the class A+ kit code for home comfort management also from a Smartphone Possibility of managing up to 8 zones using additional room units Connection to the home Wi-Fi network via the supplied RF/Wi-Fi receiver CONNECT APP available for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Maximization of room comfort with modulating regulation of the flow temperature through the Room Climatic Compensation functions differentiated for each zone and External Climatic Compensation via external temperature detectable directly from the internet or from an optional external probe It improves the average seasonal efficiency in space heating by +4%. Weekly time programming in 30-minute intervals via APP CONNECT Operating modes : Off, Holiday, Automatic, Manual Three modifiable temperature levels : Comfort, Economy, Antifreeze By reading the external temperature directly from the internet (or from the optional external probe) the system is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, thus guaranteeing the user maximum room comfort at the change in external climatic conditions. The modulating function of CONNECT allows modulation of the boiler power as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Solar circuit integration Sun Easy function DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and turns on the burner only if necessary. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. Safety and comfort Functions Antifreeze In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage Post-circulation This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function and is active after the burner goes out in heating mode. Sliding temperature operation With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user Easy Control The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO N and CONNECT remote timer controls. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€580,00
Hermann Saunier Duval Condensing Boiler THEMIS CONDENS 24 kW low NOx Methane Complete with Smoke Exhaust Kit cod. 0010028067 - NEWS ErP - Energy class Heating efficiency class B Sanitary efficiency class A Sanitary load profile XL CE identification number PIN CE 0476CQ0908 Heating Fireplace flow rate Qmin/max - 80/60°C kW 13.0/24.0 Rated power Pmin/max - 80/60°C kW 12.5/23.04 Rated power Pmin/max - 50/30°C kW - Efficiency Pmax - 80/60°C - 50/30°C % 96.0 / - Efficiency P30% - 40/30°C % 99.7 Cloak losses - Bruc. On - 80/60°C Pmax/Pmin % 0.1/2.3 Chimney losses - Bruc. On - 80/60°C Pmax/Pmin % 2.2/1.9 Chimney losses - Bruc. Off - heating/DHW % 0.3/0.7 Min/max delivery temperature °C 30/85 Boiler operating pressure min/max bar 0.3/3 Heating expansion vessel - Capacity/preload l/bar 7/0.75 Sanitary Domestic hot water production type Instantaneous ACS quality classification (EN 13203-1) 2 stars Capacity at the hearth min/max - 60°C kW 13.0/24.0 Rated power min/max - 60°C kW 12.3/23.2 Continuous flow rate (∆T= 25K) l/m 13.8 Specific flow rate (∆T = 30K) (EN13203) l/m 11.4 Peak flow rate in 10 minutes (∆T = 30K) l/10 min 114 DHW temperature min/max °C 35/65 DHW storage heat loss kWh/24h - Min/max supply pressure bar -/8 generals Gas category II2H Supply pressure mbar 20 Heating gas flow Pmin/Pmax m3/h 2.66 DHW gas flow rate Pmax m3/h 2.66 Voltage/frequency/intensity V/Hz/A 230/50/0.66 Absorption - Peak/Pmax/Pmin/Stand-by W - / - / 60 / - Heating flue temp. (50-30°C) Pmin °C 51 Sanitary fume temp. (DHW T=50°C) Pmax °C 68 Flue gas heating Pmin/Pmax g/s - CO2 Pmax % 7 Weighted NOx (0% O2) mg/kWh 56.0 Residual head at the fan Pa - IPX 4D electrical protection Weight kg 38 Dimensions 70 cm high, 40 wide and 29.5 deep (24 kW) THEMIS CONDENS Low NOx - NEW Wall-mounted condensing boiler for heating and domestic hot water, for high temperature systems. The new Themis Condens Low NOx is the condensing solution developed by Hermann Saunier Duval to replace traditional wall-mounted boilers combined with radiators that require high inlet temperature values. The main novelty is the low NOx emission burner (class 6) which makes it possible to comply with the ErP regulations in force since November 2018 in the EU. The boiler, which features a renewed casing, is designed to allow easy installation and maximum ease of management, boasting a new extremely intuitive user interface. Themis Condens Low NOx combines the simplicity of the traditional boiler with the efficiency of condensing boilers, guaranteeing the right comfort both in heating and in the production of domestic hot water. It is available in a single model with natural gas supply, power equal to 24 kW in both heating and DHW. Themis Condens Low NOx is a boiler specifically designed for high temperature systems. It was developed to give the right comfort, both for the production of sanitary water and to provide the ideal climate in the rooms. Themis Condens low NOx combines the simplicity of the traditional boiler with the efficiency of condensing boilers. The range consists of a single model with combined production of domestic hot water and heating, it is available in natural gas only . Condensing boiler with a new forced draft atmospheric burner studied and designed to have low NOx emissions , traditional copper exchanger protected with a special aluminum paint and aluminum post-condenser. The boiler features a new high-efficiency pump with high performance and a 7-litre expansion vessel. New burner with low NOx emissions (class 6) Designed for replacement in high temperature systems New casing with reduced dimensions High efficiency pump New simple and intuitive user interface Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€620,00
