Gas Boiler Biasi Inovia Cond E 25s Condensing Complete With Methane Fume Exhaust Kit - New Erp

Overview

BIASI INOVIA COND E 25S METHANE CONDENSING BOILER - NEW ErP, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: Wall mounted condensing boilers. The premixed range is simple on the outside and technological on the inside.

The sites displaying the Biasi web sales authorized brand have been authorized by BSG Caldaie a Gas SpA for the sale of Biasi products.

These companies therefore release the conventional guarantee.

Technical specifications

o Model: Inovia Cond E 25S

Energy label specifications according to the European ErP directive

o Class A heating energy efficiency

o Sanitary energy efficiency Class A

o Withdrawal profile: XL

Characteristics of heating/DHW operation:

o DHW useful thermal power: 24.4 kW

o Useful thermal power for heating: 19.5 kW

o Nominal kW heat input(*): 25 kW

o Efficiency at 100% load: 106.2%

o Sanitary flow rate t =25°K: 15.9 l/min

o High yields (in compliance with yield directive 92/42 CEE and Legislative Decree 311/06)

o Sanitary comfort (EN 13203)

o Total premix burner, built in stainless steel (Class NOx 5)

o Sanitary plate heat exchanger in stainless steel

o High efficiency pump with low energy consumption

o IPX5D degree of protection

o Dimensions hxwxd: mm 700 x 400 x 290; 32kg

o METHANE power supply

Main features

Inovia Cond E

Premixed condensing boilers

Inovia Cond E represents the new premixed BIASI condensing boiler. Inovia Cond E is equipped with innovative aesthetics and a new interface that is immediate and easy to use, it is equipped with new functions that make it an integral part of a system and which facilitate its installation and maintenance. Inovia Cond E offers all the advantages of condensing technology: great performance, high efficiency, energy saving and respect for the environment thanks to reduced polluting emissions such as NOx and CO.

Installed in low temperature systems, they allow savings of up to 30%.

Characteristics:

o • High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06)

or • Sanitary comfort (EN 13203)

o • Primary condensing exchanger in stainless steel with plastic coating to offer maximum resistance to corrosion

o • Total premix burner, built in stainless steel (Class NOx 5)

or • Sanitary plate heat exchanger in stainless steel

or • High efficiency pump with low energy consumption

or • IPX5D degree of protection

or • Can be installed in a partially protected place

or • Integration with BIASI solar systems, using a solar kit

o • Innovative digital control panel with graphic interface and keys

or • Digital pressure reading by pressure transducer

or • Arrangement for remote control and external probe

or • Possibility of remotely managing a zone valve in the case of multi-zone systems.

Control panel:

o Summer/winter/off selector

o Heating temperature regulator

o DHW temperature regulator

o Digital pressure reading

o Domestic hot water and heating temperature visualization from the display

o Visualization of fault diagnostics, block status and fault history

o Recommended filling view and filling guide

o View months left until annual maintenance is due

o External temperature display (with external probe connected) and signaling of external probe connected and K value set

o Display of flame modulation

o Visualization of the BIASI SOLCONTROL solar control unit connected to Inovia Cond E, active solar pump and solar integration

o DHW comfort function selectable by means of a dedicated and programmable key

o Direct access to the INFO menu dedicated to the user.

Fiscal detraction

As a condensing boiler, Inovia Cond E allows you to take advantage of the tax deduction according to current legislation. d

Thermoregulation

By connecting the external probe (optional) directly to the boiler, climatic regulation can be used. Inovia Cond E will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. The boiler is equipped with a complete set of curves which can be accessed by entering programming. The curve is simply chosen from the control panel.

Solar management

Inovia Cond E integrates solar management directly into the product. Thanks to the integrated solar management it is possible to connect the SOLCONTROL control unit and view the status of the pump and the relative solar integration.

Zone management

Inovia Cond E features the zone management card as standard which allows you to manage a zone valve using the BIASI remote control. In the case of a system with several high temperature zones, one zone can be managed by remote control and the other zones can be managed by chronothermostats. This allows you to select two thermoregulation curves, one in the boiler and the other in the remote control. All the zones controlled by chronothermostats will be managed by the thermoregulation curve set in the boiler, the zone controlled by the remote control will be managed by the thermoregulation curve set therein. In the case of multi-zone systems at high and low temperatures, it is recommended to use the BIASI MULTIzone system manager.

All ready for Energy Labeling

What is it about?

From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply.

These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction

For placing on the European market, the Eco-Design Directive (ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to:

or generators with a capacity of less than 400 kW

or water heaters with a capacity of less than 400 kW,

or kettles with a capacity of less than 2000 litres

As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows them to compare the performance and energy consumption of the product they wish to purchase.

The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015.

Is it about me too?

YES, it affects everyone: professionals and end users

The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available.

The user will be able to easily compare the performance of the products.

From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.

Supplier responsibility

The company that supplies the product on the market is required to equip its devices or systems with the following documentation:

o product energy label;

o product data sheet;

o system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;

o technical data sheet of the system with the parts relating to the product or the system already completed.

o Dealer liability

First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that:

o all appliances and/or systems are equipped with the respective labels and make sure that they are clearly visible;

o all devices and/or systems are always accompanied by the mandatory technical data sheets;

o any type of advertising, promotional or technical material in which energy data or price indications are shown, contains an indication of the energy efficiency class.

The new ErP regulations

ENERGY LABELLING:

Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances.

ECODESIGN (ErP):

The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.

PRODUCT LABEL

Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible.

SYSTEM LABEL

In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way.

Warranty

All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

• peso: 50.0 kg
• classe energetica produzione acs: A
• classe energetica riscaldamento: A
• gas: Methane
• marca: Blame
• metri quadri : 150
• modello: INOVIA COND E 25S METANO
• potenza in kw: 25
• potenza nominale: 25
• superficie riscaldabile mq: 150