ATTENTION! In case of immediate unavailability, the product will be ordered and shipped within 10 working days Technical Features Model: D2CND035 Heating Efficiency class (55°C): A Firebox power (Qn) kW 4.8 : 34 Rated power (80°/60°C) 4.6 : 33.2 kW Rated power (50°/30°C) 5.2 : 35 kW Heating efficiency: Up to 108.7% Modulation range: 1:7 Expansion vessel volume: 10 litres Domestic hot water Efficiency class: A Withdrawal profile: XL Temperature Range: 35°C ~ 60°C Continuous service withdrawal (∆T=30°C): 16 l/min Continuous service withdrawal (∆T=25°C): 19.2 l/min Water mains pressure: 10-0.5 Bar Technical data Power supply (V,Hz,Ø) : 220~240/50/1 Power consumption: 3.5 ~ 86 W Sound power : 52 dB(A) NOx class : 6 Electrical protection class: IP X5D Installation data Chimney diameter: 60/100 mm Maximum length for flue gas system DN 60/100: 7.6 m Maximum length for flue gas system DN 80/125: 34.4 m Maximum length for flue gas system DN 80/80: 54 m Dimensions and weight Dimensions (HxWxD): 695x440x295 mm Weight: 37 Kg Simply Peace of Mind Guarantee To guarantee you maximum peace of mind, DAIKIN has designed “SEMPLICEMENTE SERENI”, an extension of the warranty up to the 5th year of life of your product, which includes the subscription to a Scheduled Maintenance Plan with specialized Daikin technicians. Daikin D2C ultra-compact condensing boilers for heating and DHW production Why choose a condensing boiler? Daikin condensing boilers are a good solution for those who want to replace an existing boiler with a more efficient alternative, saving on costs. Our portfolio includes boilers for every need, from the wall-mounted boilers D2C and Full condens and Full Condens TOP, to the boiler with built-in heat storage GCU, to the floor-standing diesel boiler A2 Thanks to the special Daikin patented exchanger, the D2CND boiler achieves high specific power and high partialization to guarantee comfort and efficiency in any operating mode and in minimum space. The D2T version, heating only, integrates a diverter valve and can be connected directly to a storage tank for the production of domestic hot water . Ultra-compact and elegant technology The beautiful compact boiler The new D2C condensing boilers are 100% Daikin design. The ultra-compact dimensions make them suitable even for the smallest apartments, where every centimetre saved is space gained A boiler for every need The D2C boilers are available in 3 combi versions 24, 28 and 35 kW for heating and the production of instantaneous domestic hot water. A wide range of heating-only boilers is also available, the D2T, in 5 sizes, from 12 to 35 kW, which can be combined with a storage tank for the production of domestic hot water. They can be installed practically anywhere thanks to their compact size and the minimum installation space required. Thanks to the IPX5D electrical protection rating and the anti-freeze kit, they can also be installed outdoors. Do you want to keep your heating system under control even when you are not at home? Combine the Lan Adapter for control via APP ! Efficiency and respect for the environment The combustion system with regulation via the Gx Lambda probe automatically adapts to the quality of the gas used, methane or LPG, always guaranteeing clean combustion and minimal polluting emissions . Maximum comfort Thanks to a high modulation ratio, up to 1:8 , the power output is automatically varied to always adapt, moment by moment, to the real needs of the home in which it is installed. Endless showers? Domestic hot water will no longer be a problem with the D2C boiler with a DHW flow rate of up to 19 l/min in the 35 kW version Cutting-edge technology meets an attractive and user-friendly user interface Daikin Eye An elegant luminous eye that, thanks to a multi-coloured LED, signals the operating status of the appliance. In the event of a fault, the LED turns red and the error code is displayed. The simplest way to interact with your boiler! Daikin Heating Online Controller Your heating system is always under control, wherever you are! Thanks to the Daikin Heating Online Controller application you can now control and monitor your boiler conveniently from your smartphone in a simple and intuitive way Monitor The state of your heating system The room temperature in your home Energy consumption graphs. Plan Your home temperature and boiler operation with up to 6 actions per day for 7 days Vacation mode Check it out The operating mode and the set room temperature The system and the production of domestic hot water Integrating third-party products and services through IFTTT (if this then that) services Replacing your old boiler has never been easier! Thanks to its small size and IPX5D protection rating, Daikin D2C can be installed virtually anywhere. Its ultra-compact dimensions make it suitable even for the smallest apartments, where every centimeter saved is space gained and its elegant shapes do not look out of place in the kitchen. A distinctive element of the 100% Daikin design is also the Daikin Eye: an elegant luminous eye that, thanks to a multi-chromatic LED, signals the operating status of the appliance. Daikin D2C embodies the best of condensing technology. The SCOT combustion regulation system automatically adapts to the quality of the gas used, methane or LPG, always ensuring clean combustion and minimum polluting emissions. Minimized size and weight are possible thanks to the innovative high-capacity air/fume exchanger body patented by Daikin. The heart of the new D2C boiler, it has been designed to obtain the highest thermal power in the smallest space. Functions Eco Mode Return temperature control to optimize condensation Warm start DHW exchanger already heated and ready for use thanks to the memorization of habits that allows anticipating the request for domestic hot water Solar connection If the water entering the boiler has been preheated by the solar system, the burner does not ignite, for optimal integration of the solar source Exclusive initiative for Daikin customers On the occasion of the launch of the new Daikin D2C, starting from March 1st 2017 Daikin is giving away the activation cost of Semplicemente Sereni. The offer is valid for all those who purchase a Daikin boiler of any type and who already own a Daikin mono split or multisplit. All the details on daikin.it. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Fondital ITACA KC 32 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - methane Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 30.4 kW Nominal heat output: 32.3 kW Efficiency at maximum power: 96.8% Efficiency at 30% load: 108.3% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 16.2 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion tank capacity: 10 l Heating consumption at nominal power Natural gas m3 /h 3.22 DHW consumption at nominal power Natural gas m3 /h 3.65 Total absorbed electric power: 99 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 40kg METHANE power supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with room temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion vessel Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THIS PRODUCT IS MADE TO ORDER. THE GOODS WILL BE SHIPPED WITHIN 10 WORKING DAYS FROM THE ORDER Fondital Formentera KC 32 condensing boiler complete with Low NOx LPG fume exhaust kit Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 30.4 kW Nominal heat output: 32.3 kW Efficiency at maximum power: 96.8% Efficiency at 30% load: 106.2% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 16.2 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion vessel capacity: 10 l DHW consumption at nominal power Natural gas m3 /h 3.22 Total absorbed electric power: 99 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 750x420x315 mm; 40.5kg LPG power supply Warranty: 2 years FORMENTERA Formentera KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler, unlike the storage ones, allows instantaneous production of domestic hot water and uses condensing technology which allows a reduction in consumption, high efficiency and low emissions of pollutants. PLUS Modulation ratio 1:9 Touch screen user interface Standard management of 2 types of solar thermal system Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates TECHNICAL FEATURES Heat exchanger in thermopolymers and stainless steel Total premix burner Modulating gas valve with constant air/gas ratio Variable speed combustion fan 3-speed circulator with built-in deaerator 10 liter heating expansion tank Motorized diverter valve Installation flexibility thanks to the IPX5D electrical protection degree Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Availability of the boiler change kit as an accessory Efficiency classification according to 92/42/EEC: ★★★★ NOx emission class (EN 297): 5 Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

For conversion to LPG, contact your local Authorized Assistance Centre Technical features Model : Victrix 32 TT PLUS Product code : 3.025515 Sanitary Energy Efficiency Class: A Load profile : XL Maximum nominal heat input in DHW: 34.9 kW Maximum nominal heat input in heating mode: 32.7 kW Maximum useful power in domestic hot water: 34.2 kW Maximum useful power in heating: 32.0 kW Minimum useful thermal power: 3.9 kW Useful thermal efficiency at 100% Pn (80/60 °C) : 97.8% Useful thermal efficiency at 30% of the nominal load. (80/60°C) : 103.2 kW Useful thermal efficiency at 100% Pn (40/30 °C) : 106.2% Useful thermal efficiency at 30% of the nominal load. (40/30°C) : 108.2% Specific flow rate in continuous domestic hot water service (∆T 30 °C): 23.3 l/min Nominal heating expansion vessel capacity: 10 litres Electrical protection degree : IP X5D Dimensions and weight Dimensions (HxWxD): 748x440x255mm Empty weight: 32.4 kg Immergas Victrix TT PLUS Instant mural High hydraulic performance The innovative condensing module guarantees high flow rate, low risk of clogging due to impurities in the system water, greater resistance to corrosion thanks to the special alloy Storage tank Pre-arranged as standard for combination with a storage tank with a capacity of 80 to 2000 litres, it guarantees a high production of hot water Fan heater unit The combination with a water heater allows for rapid heating of the rooms. Ideal for workshops, premises for public use, gyms, etc. High seasonal yields The wide modulation field of the boiler allows high seasonal yields with a consequent reduction in gas consumption Optional thermoregulators They improve comfort and increase energy savings. Optional DOMINUS App Simple and intuitive, it allows you to check the functioning and temperature of the boiler, turn it on and off from anywhere via smartphone or tablet Formula Comfort 10 Takes advantage of the most complete 10-year maintenance program with no activation costs, with the possibility of extending it up to 15 years. In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Eco-friendly technology Complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production Ecological class 5 The best for reduced emissions of nitrogen oxides Renewable energies Using a boiler with a capacity of 120 liters or more, the boiler can be connected to solar thermal systems for a greater production of hot water. It can also be combined with hybrid systems with heat pump Maximum flexibility Approved to operate indoors, recessed and outdoors even in the open. IPX5D electrical protection. Standard antifreeze down to -5 °C Maximum compactness Only 25 cm deep Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

UNICAL X 32 C condensing boiler Low NOx 6 Complete with methane flue exhaust kit in stainless steel - ErP Technical data according to dir. ErP C24 Minimum/nominal useful power in condensing kW 33.6 - 5.4 Seasonal heating energy efficiency of environment ?s % 93 Seasonal EFFICIENCY CLASS for heating A Useful thermal power in high temperature regime. (Tr 60°C / tm 80°C) P4 kW 31.2 Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) ?4 % 87.7 Useful power at 30% of rated thermal power in low temperature regime (Tr 30°C) P1 kW 10.4 Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30°C) ?1 % 97.8 Declared load profile XL Sanitary seasonal EFFICIENCY CLASS A Production DHW cont. Dt 25 K (mixed) l/min 18.2 Expansion vessel capacity l 10 Max condensate production kg/h 5.2 Heating circuit pressure (min/max) bar 3.0 / 6.0 IP degree of protection X5D NO class x 6 Dimensions (HxWxD) mm 700x420x345 Net weight kg 41 x X like INOX, like the exchanger which is the engine of this wall-mounted condensing boiler. X is available in the instantaneous combined version (13.2 l/min), it runs on both methane and LPG (conversion kit supplied). Characteristics: Premix Low NOx burner (Class 6) IPX5D (also for outdoors) Compact dimensions and compatible with other Unical models (ideal for replacements) Template and unified connections (Unical KONm / KONe ) Minimum thermal power regulation in heating function Electronic antifreeze for operation down to -15 Management of 2 zones with differentiated priorities (high and low temperature) Electronics with HWS "Hot Water Speed" function to eliminate the delay in DHW production and automatic "air vent" function Layout conceived with large spaces for easy maintenance Wide choice of accessories including: - both modulating and on/off control thermostats - external probe for managing both the boiler and one or two high/low temperature zones STAINLESS STEEL EXCHANGER MONOSPIRAL WITH OVAL SECTION WITHOUT WELDING GREATER COMBUSTION VOLUME LESS EMISSIONS / HIGHER PERFORMANCE OPTIMIZED PRESSURE DROP REDUCTION OF DEPOSITS LESS NOISE LONGER DURATION OVER TIME FRONT ACCESS FOR EASY MAINTENANCE Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Victrix Zeus 32 Product code : 3.028382 Energy class in heating: A Sanitary energy class: A Load prifle : XL Maximum nominal heat input in DHW: 33.1 kW Maximum nominal heat input in heating mode: 29.0 kW Minimum nominal heat input: 4.3 kW Maximum useful thermal power in DHW: 32 kW Maximum useful thermal power in heating: 28 kW Minimum useful thermal power: 4.0 kW Useful thermal efficiency at 100% Pn (80 / 60 °C): 96.6% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 100.4% Minimum gas flow rate to the burner: 0.45 m 3 /h Maximum gas flow rate to the burner: 3.50 m 3 /h Weighted CO : 19 mg/kWh Weighted NO X : 38 mg/kWh Power supply: methane / LPG NO x class : 6 Minimum suction/exhaust available head: 2 Pa Maximum suction/exhaust available head: 250 Pa Nominal heating expansion vessel capacity: 10 litres Electrical protection degree : IPX5D Dimensions and weight Dimensions (HxWxD): 900x580x410 mm Empty weight: 65.5 kg Immergas Victrix Zeus Comfort and design in a small space The new VICTRIX ZEUS are condensing and total premix boilers with stainless steel boiler, compact dimensions and new design, completely renewed With 25 and 32 kW of power , they are designed for new installations, but the identical hydraulic connections compared to the previous models and the standard connection group, favor installers in replacements . In addition, the condensing module with large section stainless steel coil reduces the risk of clogging and the low-consumption circulator allows for considerable savings in electricity Thanks to the electronic card that modulates the boiler power up to 17%, high yields are obtained with a consequent reduction in gas consumption . VICTRIX ZEUS, which can also be installed outdoors in protected places such as under the balcony, can be fed with any type of fuel (methane/LPG or propane air), which is why they are supplied with a single product code In addition to allowing the fumes to be discharged from the wall in the cases envisaged by Legislative Decree 102 of 4 July 2014, the VICTRIX ZEUS are in the most ecological class of the European classification ( class 6 ) for low emissions of carbon monoxide (CO) and nitrogen oxides (NOx). For ease of use by users, the interface with LCD display and knobs, offers simple and fast adjustments and settings Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Smartech Plus Home temperature is now smart Evolution advances rapidly with the new Immergas SMARTECH PLUS digital chronothermostat: now the heating system communicates in the most immediate way with the home and those who live there also via smartphone and computer, comfort increases and consumption is under control SMARTECH PLUS is the intelligent chronothermostat with Bluetooth technology, which allows you to adjust the heating temperature through a dedicated app. Thanks to the geolocation system , it connects to smartphones and lets you know when no one is home or if even just one member of the family returns, in order to set the desired temperature It is compatible, for some functions, with the virtual assistants Alexa and Google Home The advantages of Smartech Plus • Remote adjustment With the display or remotely with the dedicated app (internet or Wi-Fi connection required) • Switching on and off At time slots or with the geolocation of family members on the app • Complete control of operation, consumption, modification of parameters and display of anomalies on the website • Easy to use and read Perfect visibility with e-ink technology of digital readers, consumes very little and runs on batteries that last even more than 2 years • Up to 18 thermostats With the app you can manage up to 18 smart thermostats in different homes 45 liter stainless steel boiler The stainless steel guarantees the inalterability of the boiler to the action of the water and the wide flange optimizes cleaning and maintenance operations. Inside the boiler there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange Multiple withdrawals of domestic hot water The capacity of the stainless steel boiler, combined with the excellent temperature regulation, have made it possible to obtain the marking, i.e. maximum sanitary performance, guaranteeing high comfort even with simultaneous withdrawals of domestic hot water Sanitary expansion tank as standard Approved for outdoor use Thanks to the new insulation that equips the stainless steel boiler and the standard protection down to 0 °C, the VICTRIX ZEUS boilers can be installed outdoors in a partially protected place. With an appropriate optional kit it is possible to extend it down to -15 °C (in the presence of electricity and gas). The degree of electrical insulation is IPX5D Primary exchanger in stainless steel The primary exchanger that equips the VICTRIX ZEUS is made with a single-tube exchange coil in stainless steel . The absence of collectors and circuits in parallel guarantees maximum reliability over time : there are no weldings. The single stainless steel spiral without bottlenecks allows for a perfectly balanced hydraulic circuit, considerably reducing pressure drops . The internal section, wide and constant , allows to limit deposits, reducing the risk of clogging in the case of impurities present in the water, in the case of replacing boilers on dated systems Due to this peculiarity, the VICTRIX ZEUS are ideal for replacement "Green series" plug-in flue The VICTRIX ZEUS have a dedicated series of air intake/fume exhaust kits made in such a way as to guarantee high resistance to corrosion and considerable speed and functionality during installation, thanks also to the plug-in coupling system and sealing gaskets. held in special material. VICTRIX ZEUS boilers can be installed in sealed chamber and forced draft or open chamber and forced draft configuration, ideal for outdoor installation in a partially protected place Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION FOR THE OPERATION OF THE LPG BOILER IT IS NECESSARY TO CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Beretta MYNUTE E 32C Low NOx condensing boiler complete with flue gas kit 20164602 Methane or LPG Wi-Fi Optional - NEW Boiler code 20164602 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A XL load profile NOx emission class 6 Technical features Heating thermal capacity (max-min) kW 29.00-6.00 Nominal DHW heat input (max-min) kW 31.60-6.00 Expansion vessel capacity on membrane l8 DHW production at ΔT= 25°C / 30°C / 35°C l/min 18.1/15.1/12.9 Supply voltage V-Hz 230 - 50 IP X5D degree of protection DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 29 kgs MYNUTE E BERETTA PRESENTS MYNUTE E, THE NEW CONDENSING BOILER WHICH, COMBINING RELIABILITY AND COMFORT WITH INSTALLATION FLEXIBILITY, IS THE IDEAL CHOICE FOR REPLACING The new MYNUTE E range is divided into three models combined in 25 kW and 32 kW power, one of which is a 25 kW DIN version, to also allow the replacement of boilers with hydraulic standards other than Beretta. The linear and modern design, in line with the recent generation Beretta boilers, the compactness of the dimensions and the installation flexibility make MYNUTE E easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or built-in, using dedicated accessories. The good efficiency, which places the range in class A, the ease of use and maintenance, and the excellent comfort, both in heating and DHW, complete the profile of this product, which will be appreciated for its reliability and functionality, in perfect harmony with the MYNUTE Beretta tradition. MYNUTE E, RELIABILITY AND FLEXIBILITY FOR A WORRY-FREE REPLACEMENT FEATURES Aluminum condensing exchanger Modulation range 1:5 Low consumption modulating circulator (EEI ≤ 0.20), 6 m Low NOx emissions: CLASS 6 (UNI EN 15502) Availability of 25kw model also with sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Installation flexibility: indoor, outdoor and recessed installation (in a partially protected place) The 25C and 25C DIN models are C10 approved. Smoke clapet (non-return valve) available as an accessory Click-fit flue connection: fast and safe, without the need for an external collar Antifreeze heater kit, hydraulic connections and external probe available as accessories IPX5D electrical protection degree “DOUBLE T” template supplied Compatible with hybrid connects for managing up to two system zones Compatible with air-propane gas (25C and 25C DIN models) and with LPG, through optional kits. For gas conversion, contact authorized Beretta Technical Assistance Centres Compatible with BeSmart WiFi comfort control as thermostat (OTBus communication), allowing the most advanced functions Possibility of intubating flues with the special flue in PP ø50, ø60 and ø80 Polyphosphate dosing filter and compact magnetic filter available as accessories Hybrid Ready: Mynute E can be integrated into Beretta multi-energy systems through the Rec 10H Hybrid and the Connect Hybrids, available as accessories CONNECTIVITY WITH BeSMART (wi-fi optional) MYNUTE E is equipped with a control panel that stands out for its ease of use. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the MYNUTE E functions. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE E FUNCTIONS MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC ACCESSORIES PREHEAT PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Fondital Formentera KC 32 condensing boiler complete with METHANE Low NOx fume exhaust kit Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 30.4 kW Nominal heat output: 32.3 kW Efficiency at maximum power: 96.8% Efficiency at 30% load: 106.2% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 16.2 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion vessel capacity: 10 l DHW consumption at nominal power Natural gas m3 /h 3.22 Total absorbed electric power: 99 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 750x420x315 mm; 40.5kg METHANE power supply Warranty: 2 years FORMENTERA Formentera KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler, unlike the storage ones, allows instantaneous production of domestic hot water and uses condensing technology which allows a reduction in consumption, high efficiency and low emissions of pollutants. PLUS Modulation ratio 1:9 Touch screen user interface Standard management of 2 types of solar thermal system Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates TECHNICAL FEATURES Heat exchanger in thermopolymers and stainless steel Total premix burner Modulating gas valve with constant air/gas ratio Variable speed combustion fan 3-speed circulator with built-in deaerator 10 liter heating expansion tank Motorized diverter valve Installation flexibility thanks to the IPX5D electrical protection degree Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Availability of the boiler change kit as an accessory Efficiency classification according to 92/42/EEC: ★★★★ NOx emission class (EN 297): 5 Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER IMMERGAS VICTRIX SUPERIOR 32 KW CONDENSING COMPLETE WITH KIT FOR METHANE FUME EXHAUST - NEW ERP Technical features Product code: 3.025503 Type: INSTANT condensing boiler Energy efficiency Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Rated useful power: 32 kW Hot water production (∆t 30 °C) l/min: 15.3 Nominal / (real) system expansion tank capacity liters 8.0 / (5.8) System expansion vessel pre-charge pressure bar 1.0 Head available with flow rate 1000 l/h kPa (m wc) 31.0 (3.16) Useful thermal power for hot water production kW (kcal/h) 32.0 (27,520) DHW adjustable temperature °C 30 - 60 DHW circuit minimum dynamic pressure bar 0.3 DHW circuit max pressure bar 10 Min. domestic hot water withdrawal 1.5 litres/min Characteristics Power supply V/Hz 230 - 50 Nominal absorption A 0.78 Power absorbed in stand-by W 5.5 Electrical insulation degree IP X5D Dimensions Dimensions (HxWxD): 835 x 440 x 350 VICTRIX SUPERIOR Low consumption: the modulating circulator automatically adapts operation to the conditions of use and reduces electricity consumption. Maximum domestic comfort: the 2-litre micro-accumulator speeds up hot water delivery and reduces waiting times compared to other instantaneous boilers. High seasonal yields: the wide modulation range of the boiler allows high seasonal yields with a consequent reduction in gas consumption. Display: large, backlit liquid crystal, provides the main operating information. Thermoregulators: optional. They improve comfort and increase energy savings. Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Renewable energy: can be combined with solar systems. High flexibility: approved to operate indoors and outdoors in partially protected places. IPX5D electrical protection. Standard antifreeze up to -3 °C. OTHER CHARACTERISTICS: HIGH HYDRAULIC PERFORMANCE With the low energy consumption modulating circulator and the possibility of setting the ∆t on the system, these boilers are ideal on systems equipped with zone and thermostatic valves, to enhance the condensing operation of the appliance, reducing consumption energetic. HIGH EFFICIENCY IN ALL SEASONS Even in mid-season, when energy absorption is limited, efficiency is still high and running costs are reduced thanks to the modulation range from 12.5% ​​to 100% of the power. TECHNOLOGY AND SIMPLICITY OF USE The large and functional backlit liquid crystal display allows easy reading of all the main information relating to operation. Two practical knobs allow you to control the device. § INSTALLATION FLEXIBILITY With 19 cm of space between the water connections and the wall, it can be easily installed in any replacement; moreover, the boilers are designed for internal or external installation in partially protected places. The standard antifreeze protection is down to -3 °C and can be extended, with a suitable optional kit, down to -15 °C. Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

Fondital ITACA KC 32 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - LPG Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 30.4 kW Nominal heat output: 32.3 kW Efficiency at maximum power: 96.8% Efficiency at 30% load: 108.3% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 16.2 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion vessel capacity: 10 l Heating consumption at nominal power Natural gas m3 /h 3.22 DHW consumption at nominal power Natural gas m3 /h 3.65 Total absorbed electric power: 99 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 40kg LPG power supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with room temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion vessel Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less