Baxi LUNA IN PLUS 26 kW low NOx built-in condensing boiler complete with flue gas exhaust kit standard fittings kit cod. A7736264 Methane or LPG - NEW Technical features XL load profile Seasonal space heating energy efficiency class A Water heating energy efficiency class A DHW nominal heat input kW 26.8 Heating nominal heat input kW 20.6 Reduced heat input kW 3.9 Sanitary nominal thermal power kW 26 Expansion tank capacity l 25-80 Domestic hot water production ∆T 25°C (1) l/min 13.8 Minimum domestic water flow rate l/min 2 Dimensions (hxlxp) - with case mm 1170x600x245 Dimensions (hxlxp) - boiler mm 770x470x238 Degree of protection IPX5D MOON IN PLUS Luna IN Plus is the new range of wall-mounted condensing boilers ideal for outdoor built-in installations thanks to the fittings kit for built-in installation supplied as standard . With Luna IN Plus it is possible to create three different installations: built-in installation with containment box; suspended installation in partially protected places; open-air suspended installation with cover kit. Luna IN Plus: the ideal boiler for built-in installation outdoors Luna IN Plus is the ideal boiler for built-in installation outdoors specifically designed to replace an old built-in generator. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments (even in new homes) and in general in all housing units where efficient space management is an important objective (eg in technical rooms or in the presence of containment boxes) The packaging includes the bracket and installation fittings for inserting the boiler into the containment box (available as an accessory). Outdoor hanging installation Luna IN Plus can be suspended outdoors, in partially protected places (e.g. balconies) and also outdoors with the addition of the outdoor cover kit. To facilitate installation, the telescopic fitting kit accessory is available in both installations (with gas and sanitary water tap). Inside the packaging are the template and the hooking bracket for wall installation. Features Luna IN Plus Wide modulation range: greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in emissions pollutants Gas Adaptive Control Innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Compactness Depth of only 238 mm which allows it to be installed in most of the boxes on the market. Digital control panel Digital control panel that allows easy programming and immediate boiler operation diagnostics with recording of the latest anomalies (STANDARD in models Luna IN Plus 26, 30 and 1.24 Antifreeze function The boiler has been designed to operate down to -15°C. Furthermore, the anti-freeze function provides for the automatic ignition of the burner, avoiding freezing phenomena hydraulic system Electric three-way diverter valve (also heating only model) Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense even in DHW operation Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Room probe, heating and DHW programmer integrated in the remote control panel Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the gas in case of water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 26 CS/1-5 Article code : 0010022020 Power supply: methane or LPG Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 12.6 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 103.4% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 34.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION POSSIBILITY OF PROPANE SUPPLY THROUGH THE SERVICE CENTER. FOR INFO, CONTACT THE AREA HERMANN ASSISTANCE IN ADVANCE Hermann Saunier Duval THEMA CONDENS 26 kW condensing boiler complete with low NOx flue gas kit - Methane Model: Efficiency class Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating/Sanitary Nominal power Pmin/max heating - 80/60°C kW 5.4 / 26.1 Min/Max Nominal Power (60°C) (kW) DHW 5.1 / 25.5 Continuous flow rate (ΔT = 25K) 15.0 generals Supply gas - Methane Nox class - 5 Electrical protection IPX - 5D Dimensions mm (HxLxP) 740x418x344 THEMA Condens IS Solution for multi-family units Ideal for structures with single flue gas outlet Smoke kit included, non-return valve already installed High sanitary comfort Hot water immediately available thanks to Aquaspeed® technology New design with flat casing and touch-screen user interface Continuous domestic hot water production up to 18 l/min ErP class A+ in combination with MiGo climatic control unit Wall-mounted combined condensing boiler for heating and domestic hot water of multi-family units with single ducting The new Thema Condens IS has a renewed aesthetic with modern and essential lines, with a flat casing and an innovative touch-screen user interface. It is the Hermann Saunier Duval solution designed to replace wall-hung boilers (traditional or condensing) in multi-family complexes where the various boilers discharge into the same flue with a single pressurized ducting system. It is in fact equipped with a dedicated flue kit (included in the supply) for direct connection to a single flue system. The boiler has C(10)3 and C(12)3 certification which makes it possible to install it in multi-family housing structures even where there are boilers from different manufacturers. The high sanitary comfort is guaranteed by the pre-heating function with stainless steel plate sanitary exchanger and by the Aquaspeed® technology for the immediate delivery of hot water. Thema Condens IS is available in two power sizes: the new 26 kW and the 31 kW with methane fuel, but with the possibility of regulation for propane fuel. Standard smoke kit A version dedicated to multi-family systems with a single pressurized ducting system within the same flue, Thema Condens IS is equipped with a standard flue kit that facilitates installation, presenting itself as the optimal solution in case of replacement in the aforementioned structures . The supplied kit consists of an 80/125 mm adapter with an 87° bend and a rigid connection section for connection directly to the main flue outlet of the multi-family complex. The non-return valve is already installed in the boiler. The safety systems present in the kit guarantee maximum reliability of the entire system, safeguarding against the risk of undesired evacuation of exhausted fumes - also coming from other boilers in the housing unit - inside the installation room of the boiler itself, in full compliance with the Italian standard UNI 7129 part 3. Thema Condens IS stands out in its reference market boasting two additional certifications C(10)3 and C(12)3 - thanks to which it is possible to install a condensing boiler inside single pressurized flue systems manufactured by third parties which already include other boilers from different manufacturers, without in any way affecting the level of performance of the system in terms of efficiency and yields in heating and domestic hot water production. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 26 CS/1-5 CFI Article code : 0010022021 Power supply: methane or LPG Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 12.6 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 103.4% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 34.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart, they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMI 26 CS/1-5 Article code : 0010025186 Power supply: methane or LPG Forced draft sealed chamber Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 16.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 97.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 20-litre stratified kettle Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x546 mm Weight : 43.3Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMI Unrivaled sanitary comfort with an integrated storage tank Always ecoTEC plus but with an extra hot water reserve The new ecoTEC plus VMI has been renewed to achieve a higher level of efficiency, always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The system consisting of a boiler with storage tank is simple to assemble : the first step is the installation of the actoSTOR CL wall-mounted storage tank equipped with the relative pipes supplied for domestic water, then the ecoTEC plus VMW wall-mounted boiler is hung on the storage tank . All the necessary material is available within the same packaging. The actoSTOR CL stratification storage tank guarantees the same performance as a 60-litre coil storage tank but with considerably smaller spaces . It is possible, via a parameter in the electronics, to exclude the functionality of the boiler by making the boiler work instantaneously, guaranteeing savings on gas consumption The most significant development of the product is the IoniDetect fuel gas detection system which, in combination with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology allows you to use the boiler with a mixture of gas containing up to 20% hydrogen The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, technician or user. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMI The perfect solution for heating and domestic hot water The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Boiler with integrated 20-litre storage tank A new additional 26 kW size is also available High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER HERMANN SAUNIER DUVAL SPAZIO 4 CONDENSING 26 kW METHANE COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Domestic hot water production technology: Aquaspeed® Heating Nominal power P min/max heating 80/60 °C: kW 5.4/19.1 Partial load efficiency 30% 40/30 °C %: 108.3 Sanitary Rated power min/max (60 °C): kW 5.8/27.2 Specific flow rate (∆T=25 K): l/min 15 Continuous flow rate (∆T=30 K): l/min 12 Min/max DHW temperature: 35/60 °C Electrical characteristics Total absorbed electric power: W 94 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 850 x 520 x 240 mm CNG code (G20) - 10017160 METHANE version SPACE 4 CONDENSING The ecological and high-performance Spazio 4 Condensing boilers meet the highest standards in terms of efficiency and comfort, thanks to the exclusive Aquaspeed® technology for the production of domestic hot water. The range includes a 26 kW combined model and a 26 kW heating only model. It stands out for the optimization of spaces, thanks to the external installation, and for the containment of energy consumption. Characteristics Energy classification 4 stars **** (92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars *** (EN 13203-1), thanks to the Aquaspeed® system which guarantees the immediate delivery of domestic hot water at the desired temperature. The boiler is installed outside, and is controlled completely and comfortably from inside thanks to the standard remote timer control: the user is not required to perform any intervention directly on the boiler Solar Easy: all models in the range can be combined with solar systems, thanks to special kits. The compact size (only 24cm deep) minimizes clutter on balconies Continuous domestic hot water (DHW) production up to 15 l/min (Kombi models) Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating and DHW antifreeze protection -5 °C (standard) and -15°C with optional antifreeze kit Standard weekly timer control: user interface with remote control Automatic filling of the system Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! The built-in unit is purchased separately. Technical Features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Energy efficiency class in sanitary ware: A Performance Stars: ★★★★ Heating power: 5.2 kW ~ 25.1 kW Sanitary power: 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min ACS temperature regulation: 35°C ~ 60°C Hot water comfort stars: ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection: IPX5D Power supply: Methane Optional accessories Built-in box 0010030848 Installation data Flue gas connection diameter: 60/100 mm Possible diameter of exhaust gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic pipe diameter: 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Vaillant ecoINWALL plus VMW built-in condensing wall-mounted boiler So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW built-in wall-mounted boiler for domestic heating and domestic hot water production. With the combination of the convenient built-in, it allows for wall installation that disappears completely into the wall in just 25 centimetres. With this solution Vaillant responds to the needs of residential construction: limited space inside homes and aesthetic constraints that prevent the installation of exposed boilers on balconies and terraces. Since it is dedicated to the outside of the building, the boiler is equipped as standard with frost protection up to -15°C. From the display of the dedicated remote control, the user is able to carry out control, adjustment and reporting of any anomalies, remaining comfortably inside the home. Thanks to the pre-heating system and the NTC probes that monitor and prevent temperature changes, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows you to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the intelligent answer for modern installations, but a concentrate of performance, savings and technology that does not require any space inside homes. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High sanitary comfort thanks to adjustable preheating Stainless steel exchanger Modulation 1:5 8 litre expansion vessel Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with remote control as standard inside the home Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Thema Condens 26 Power supply: LPG NOx class : 6 Degree of protection: IPX5 Energy efficiency Energy efficiency class in heating: A Energy efficiency class in sanitary ware: A Health load profile: XL Warm-up performance Rated power 80°~60°C : 4.9 ~ 24.2 kW Maximum efficiency 80°~60°C : 98.8% Maximum efficiency 50°~30°C : 106.5% Healthcare performance Rated power 60°C: 25.5 kW Specific flow rate (DT = 30K) (EN13203) : 12.2 l/min Domestic hot water temperature: 38°~60° C Dimensions and weight Dimension (HxWxD) 740x418x344 mm Net weight: 37.1 Kg THEMA CONDENS Wall-mounted condensing boiler specifically for commercial propane systems Thema Condens, ecological and high-performance, meets the highest standards in terms of efficiency and comfort, thanks to the exclusive Aquaspeed® technology for the production of domestic hot water. The range includes a single 26 kW combined model, designed with the aim of offering Hermann Saunier Duval installers the ideal solution for replacing traditional boilers powered by commercial propane. Thema Condens was designed with the aim of offering an ideal solution for replacing traditional boilers powered by commercial propane. Thema Condens, a boiler at the top of its category in terms of domestic comfort and efficiency. The exclusive Aquaspeed® system guarantees the immediate supply of domestic hot water at the desired temperature: the preheating of the primary circuit and therefore also of the secondary stainless steel plate exchanger, allows the boiler to respond immediately to any sudden request from the user. Designed for commercial propane fueled systems Equipped with Aquaspeed® technology for pre-heating domestic hot water Elegant design and small size Ease of management Thema Condens was created to operate on commercial propane but can easily be converted to operate on methane gas if necessary. Thema Condens is the ideal solution for replacing, inside apartments, traditional or condensing wall-mounted boilers that work on high-temperature or low-temperature systems. Thema Condens is available in a single model with a power of 24 kW for heating and 26 kW for the production of domestic hot water. Characteristics Commercial propane condensing wall mounted boiler, combined for heating and domestic hot water, with stainless steel primary exchanger 4-star energy classification (92/42/EEC) with efficiency up to 108.4%; 3-star domestic hot water comfort (EN 13203-1), thanks to the Aquaspeed® system which guarantees immediate delivery of domestic hot water at the desired temperature. Control panel with backlit digital display, easy to use: the user can easily select the desired functions and temperatures. Solar Easy: compatible with all Hermann Saunier Duval solar systems, thanks to a complete series of solar kits. The small size makes Thema Condens perfect for both replacement and installation in new construction systems. Product Warranty : All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! Built-in unit is purchased separately. Technical features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Sanitary energy efficiency class: A Performance Stars : ★★★★ Heating power : 5.2 kW ~ 25.1 kW DHW power : 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min DHW temperature adjustment : 35°C ~ 60°C Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection : IPX5D Power supply: LPG Optional accessories Built-in box 0010030848 Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Wall-mounted built-in condensing boiler Vaillant ecoINWALL plus VMW So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW wall-mounted built-in boiler for domestic heating and the production of domestic hot water. With the combination of the convenient built-in feature, it allows for wall-mounted installation that is completely hidden in the wall in just 25 centimetres With this solution, Vaillant responds to the needs of residential construction: limited spaces inside homes and aesthetic constraints that prevent the installation of visible boilers on balconies and terraces. Being dedicated to the outside of the building, the boiler is equipped as standard with protection against frost down to -15°C. From the display of the specific remote control, the user is able to carry out the operations of control, regulation and signaling of any anomalies, remaining comfortably inside the house. Thanks to the pre-heating system and the NTC probes which monitor and prevent sudden changes in temperature, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the smart answer for modern installations, but a concentration of performance, savings and technology that does not require any space inside the home. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High DHW comfort thanks to settable pre-heating Exchanger in stainless steel Modulation 1:5 8 liter expansion tank Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with standard remote control inside the house Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! Built-in Unit NOT Included Technical features Model : Luna IN Plus 26 Wi-Fi DHW nominal heat input: 26.8 kW Nominal heating heat input: 20.6 kW Heating energy efficiency class: A DHW energy efficiency class: A Load profile : XL Auxiliary electricity consumption: 0.013 ~ 0.030 kW Rated Electric Power: 87W Minimum operating temperature: -15°C Expansion vessel capacity: 8 lire Heating circuit water temperature adjustment: 25° ~ 80° C Sanitary water temperature adjustment: 35° ~ 60° C Specific flow rate according to EN 13203-1 : 12.4 l/min Sanitary water production ∆T 25 : 14.9 l/min DHW circuit minimum water flow rate: 2 l/min Heating circuit water pressure: 0.5 ~ 8 bar Sound power level : 49 dB(A) Degree of Protection : IPX5D Maximum length Ø 60/100 concentric exhaust-intake pipe: 10 m Maximum length of Ø 80 split exhaust-intake pipe: 80 m Maximum flue gas temperature: 80° C Power supply: CNG / LPG Dimensions and weight Dimensions (HxWxD): 770x470x238 mm Weight : 32.5Kg Dimensions with case (HxWxD): 1170x600x245 mm Baxi Luna in Plus boiler with standard Wi-Fi Built-in solutions for outdoor installations Luna IN Plus is the new range of wall-mounted condensing boilers ideal for outdoor built-in installations thanks to the fittings kit for built-in installation supplied as standard . Luna IN Plus is also available in the version with Wi-Fi control panel kit for outdoor boilers supplied as STANDARD With Luna IN Plus it is possible to create three different installations : 1. Recessed installation with containment case 2. Hanging installation in partially protected places 3. Open-air suspended installation with cover kit Luna IN Plus is the ideal boiler for built-in installation outdoors specifically designed to replace an old built-in generator. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments (even in new homes) and in general in all housing units where efficient space management is an important objective (eg in technical rooms or in the presence of containment boxes) The bracket and installation fittings for inserting the boiler into the containment box are supplied AS STANDARD (available as an accessory) inside the packaging Outdoor hanging installation Luna IN Plus can be suspended outdoors, in partially protected places (eg balconies) and also in the open with the addition of the outdoor cover kit . To facilitate installation, the telescopic fitting kit accessory is available in both installations (with gas and sanitary water tap). Inside the packaging are the template and the hooking bracket for wall installation Wi-Fi control panel kit for outdoor boilers Chronothermostat with integrated WI-FI module that connects to the home internet network without having to connect other devices to the router. Supplied STANDARD in the Luna IN Plus 26 Wi-Fi model. Optional accessory for all other models Color display with 3 selectable color themes Hybrid App for smartphone for remote control Possibility of connecting to one or more units to control the temperature, manage the weekly programming, view the consumption graph, read any error messages, set the holiday mode Management from different smartphones, so that more people can interact with the chronothermostat Simple installation by connecting 4 wires between the chronothermostat, the power supply and the boiler Enable the Baxi remote assistance service by your side which allows remote management by the Baxi authorized Service network on the status of the installation Baxi Luna IN Plus Wide modulation range Greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions GAC Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic combustion control to constantly maintain maximum efficiency values. Compactness It has a depth of only 238 mm which allows it to be installed in most cases on the market Digital control panel The Luna IN Plus boiler is equipped with a digital control panel that allows easy programming and immediate boiler operation diagnostics with recording of the latest anomalies Antifreeze function The boiler has been designed to operate down to -15°C. Furthermore, the anti-freeze function provides for the automatic ignition of the burner, avoiding freezing phenomena. Main Features Luna IN Plus • WI-FI control panel kit STANDARD in the Luna IN Plus WI-FI model: Hybrid App for smartphone for remote control of the boiler. Optional accessory for all other models • Remote digital control panel with LCD display STANDARD in Luna IN Plus models • Connection to zone system • Built-in installation: the ultra-compact dimensions of the boiler, 770x470x238 mm, allow it to be installed in the majority of boxes on the market • STANDARD built-in installation kit (gas tap/gas inlet/telescopic fittings) • Automatic system filling system • Hydraulic group in brass • Minimum operating temperature: -15°c • Antifreeze function and IPX5D degree of protection • Wide modulation field 1:7 greater efficiency and silence • GAC (Gas Adaptive Control): automatic combustion control • Hanging installation in partially protected places • Open-air suspended installation with cover kit, available as an accessory • Arrangement for combination with the Baxi integrated solar system Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION POSSIBILITY OF SUPPLY TO PROPANE THROUGH A SIMPLE ADJUSTMENT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Hermann Saunier Duval THEMA CONDENS 31 IS condensing boiler complete with low NOx fume kit for multi-family solutions Methane or propane Model: Efficiency class Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating/Sanitary Nominal power Pmin/max heating - 80/60°C kW 6.4 / 25.6 Min/Max Nominal Power (60°C) (kW) DHW 6.4 / 31.0 Continuous flow rate (ΔT = 25K) l/min 18.0 generals Supply gas - Methane Nox class - 5 Electrical protection IPX - 5D Dimensions mm (HxLxP) 740x418x344 CONVERTIBLE TO PROPRANO THROUGH SERVICE CENTER THEMA Condens IS Solution for multi-family units Ideal for structures with single flue gas outlet Smoke kit included, non-return valve already installed High sanitary comfort Hot water immediately available thanks to Aquaspeed® technology New design with flat casing and touch-screen user interface Continuous domestic hot water production up to 18 l/min ErP class A+ in combination with MiGo climatic control unit Wall-mounted combined condensing boiler for heating and domestic hot water of multi-family units with single ducting The new Thema Condens IS has a renewed aesthetic with modern and essential lines, with a flat casing and an innovative touch-screen user interface. It is the Hermann Saunier Duval solution designed to replace wall-mounted boilers (traditional or condensing) in multi-family complexes where the various boilers discharge into the same flue with a single pressurized ducting system. It is in fact equipped with a dedicated flue kit (included in the supply) for direct connection to a single flue system. The boiler has C(10)3 and C(12)3 certification which makes it possible to install it in multi-family housing structures even where there are boilers from different manufacturers. The high sanitary comfort is guaranteed by the pre-heating function with stainless steel plate sanitary exchanger and by the Aquaspeed® technology for the immediate delivery of hot water. Thema Condens IS is available in two power sizes: the new 26 kW and the 31 kW with methane fuel, but with the possibility of regulation for propane fuel. Standard smoke kit A version dedicated to multi-family systems with a single pressurized ducting system within the same flue, Thema Condens IS is equipped with a standard flue kit that facilitates installation, presenting itself as the optimal solution in case of replacement in the aforementioned structures . The supplied kit consists of an 80/125 mm adapter with an 87° bend and a rigid connection section for connection directly to the main flue outlet of the multi-family complex. The non-return valve is already installed in the boiler. The safety systems present in the kit guarantee maximum reliability of the entire system, safeguarding against the risk of undesired evacuation of exhausted fumes - also coming from other boilers in the housing unit - inside the installation room of the boiler itself, in full compliance with the Italian standard UNI 7129 part 3. Thema Condens IS stands out in its reference market boasting two additional certifications C(10)3 and C(12)3 - thanks to which it is possible to install a condensing boiler inside single pressurized flue systems manufactured by third parties which already include other boilers from different manufacturers, without in any way affecting the level of performance of the system in terms of efficiency and yields in heating and domestic hot water production. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER SAUNIER DUVAL SPAZIOZERO 4 CONDENSING 26 kW METHANE GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Heating Nominal power P min/max heating 80/60 °C: kW 5.5/26 Sanitary Rated power min/max (60 °C): kW 5.5/26 Specific flow rate (∆T=25 K): l/min 15 Peak flow rate in 10 minutes (ΔT = 30K): l/10 min 126 Electrical characteristics Total absorbed electric power: W 168 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 1140 x 550 x 246 mm CNG code (G20) - 10017158 METHANE version General characteristics SPAZIOZERO 4 CONDENSING The Spaziozero Condensing condensing boiler meets the needs of modern homes in terms of space and consumption. Only one 26 kW model is available. Characteristics Energy classification **** (92/42/EEC) with yields up to 108.3% Sanitary comfort *** (EN 13203-1), thanks to the exclusive Aquaspeed® technology with sanitary stainless steel plate exchanger with pre-heating function (Kombi models) Continuous domestic hot water (DHW) production up to 15 l/min (Kombi models) Solar Easy: prepared for integration with solar systems Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating and DHW antifreeze protection -5 °C (standard) and -15°C with optional antifreeze kit Standard weekly timer control: user interface with remote control Automatic filling of the system • Only 24 cm deep for minimum encumbrance on balconies Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less