icon Beretta Mynute Rain Green E 25 Csi Box Condensing Boiler Complete With Smoke Exhaust Kit - New Erp | CaldaieMurali

Beretta Mynute Rain Green E 25 Csi Box Condensing Boiler Complete With Smoke Exhaust Kit - New Erp

Description

ATTENTION FOR THE GAS TRANSFORMATION, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE

BERETTA MYNUTE RAIN GREEN AND 25 CSI BOX CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP

  • Code: 20096647

Energy label specifications according to the European ErP directive

  • Class A heating energy efficiency
  • Sanitary energy efficiency profile XL Class A
  • Characteristics of heating/DHW operation:
  • Heating nominal heat input: 20 kW
  • Sanitary nominal heat input: 25 kW
  • Classification European Directive EEC 92/42: ****
  • Quantity of hot water with Δt=25°C: 14 l/min
  • Dimensions (hxlxp) mm 1223 x 654 x 255 + 26
  • Net weight of boiler + box kg 39+20
  • METHANE power supply
  • C (heating + sanitary water)
  • S (sealed chamber)
  • I (electronic ignition, ionisation control)
  • Exclusive services: Beretta offers 5 or 10 years of peace of mind thanks to the Kasko warranty extension formulas.

Standard:

BeSMART Remote Control Panel and external probe in the BOX version (class A+)



General characteristics

1) Mynute Rain Green E BOX - ErP

The new Mynute Rain Green E outdoor range (down to -10°C with special kits), offers three models suitable for "wall" installation and a specific version for "recessed" installation. Designed following the ecodesign indications provided for by the European ErP Directive, it is made up of combined and heating only models. The boilers have a higher power in DHW operation thus offering greater comfort. Mynute Rain Green E is equipped with the new front access condensing exchanger which allows high yields (94% seasonal yield) and with the new low consumption modulating circulator which can be configured according to the type of system. Mynute Rain Green E is compatible with the optional BeSMART WiFi Comfort Control Kit which allows remote comfort control from smartphones and tablets using special free APPs and together they form a class A+ system. Mynute Rain Green E is compatible with the new Ø 50 mm flue with which it is possible to carry out ducting up to 49 m (25 CSI and 25 RSI versions).

2) Mynute Green E: high energy efficiency, reduced gas consumption and low emissions.

The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries.

3) The new Beretta condenser exchanger with front access

The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%.

4) Flex modulating circulators: optimized performance, low consumption

Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature.


Up to 49 meters of ducting

With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power.

The simplicity of comfort

The management, simple and intuitive, favors the understanding and use of all the functions. There are two control selectors for setting the adjustment functions: heating temperature selection knob and domestic hot water knob. Boiler status indications are shown on the display. The filling of the system is carried out simply thanks to the practical filling cock and the visible control hydrometer.

[ 1 ] Digital display
[ 2 ] Selector on/off/summer/winter/reset/heating temperature/activation of the Clima Amico system
[ 3 ] Domestic hot water temperature selector/preheating activation
[ 4 ] Hydrometer


Characteristics:

  • Class A+ system without the addition of options
  • Specific for use in built-in BOX
  • Low consumption modulating circulator (6 m head)
  • Low polluting emissions: class 5 (UNI EN 483)
  • New condensing exchanger in aluminum with high flow rate and front access
  • Thermoregulation with standard external probe
  • REC 08 remote control panel as standard
  • Antifreeze kit available up to -10°C (optional)
  • Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP
  • IPX5D electrical protection degree
  • Plumbing fittings, gas and sanitary taps supplied
  • For gas conversion, contact authorized Beretta Technical Assistance Centres

Product Guarantee

All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Beretta Mynute Rain Green E 25 Csi Box Condensing Boiler Complete With Smoke Exhaust Kit - New Erp

Product form

ATTENTION FOR THE GAS TRANSFORMATION, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE BERETTA MYNUTE RAIN GREEN AND 25 CSI... Read more

€1.231,00 Incl. VAT

    Description

    ATTENTION FOR THE GAS TRANSFORMATION, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE

    BERETTA MYNUTE RAIN GREEN AND 25 CSI BOX CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP

    • Code: 20096647

    Energy label specifications according to the European ErP directive

    • Class A heating energy efficiency
    • Sanitary energy efficiency profile XL Class A
    • Characteristics of heating/DHW operation:
    • Heating nominal heat input: 20 kW
    • Sanitary nominal heat input: 25 kW
    • Classification European Directive EEC 92/42: ****
    • Quantity of hot water with Δt=25°C: 14 l/min
    • Dimensions (hxlxp) mm 1223 x 654 x 255 + 26
    • Net weight of boiler + box kg 39+20
    • METHANE power supply
    • C (heating + sanitary water)
    • S (sealed chamber)
    • I (electronic ignition, ionisation control)
    • Exclusive services: Beretta offers 5 or 10 years of peace of mind thanks to the Kasko warranty extension formulas.

    Standard:

    BeSMART Remote Control Panel and external probe in the BOX version (class A+)



    General characteristics

    1) Mynute Rain Green E BOX - ErP

    The new Mynute Rain Green E outdoor range (down to -10°C with special kits), offers three models suitable for "wall" installation and a specific version for "recessed" installation. Designed following the ecodesign indications provided for by the European ErP Directive, it is made up of combined and heating only models. The boilers have a higher power in DHW operation thus offering greater comfort. Mynute Rain Green E is equipped with the new front access condensing exchanger which allows high yields (94% seasonal yield) and with the new low consumption modulating circulator which can be configured according to the type of system. Mynute Rain Green E is compatible with the optional BeSMART WiFi Comfort Control Kit which allows remote comfort control from smartphones and tablets using special free APPs and together they form a class A+ system. Mynute Rain Green E is compatible with the new Ø 50 mm flue with which it is possible to carry out ducting up to 49 m (25 CSI and 25 RSI versions).

    2) Mynute Green E: high energy efficiency, reduced gas consumption and low emissions.

    The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries.

    3) The new Beretta condenser exchanger with front access

    The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%.

    4) Flex modulating circulators: optimized performance, low consumption

    Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature.


    Up to 49 meters of ducting

    With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power.

    The simplicity of comfort

    The management, simple and intuitive, favors the understanding and use of all the functions. There are two control selectors for setting the adjustment functions: heating temperature selection knob and domestic hot water knob. Boiler status indications are shown on the display. The filling of the system is carried out simply thanks to the practical filling cock and the visible control hydrometer.

    [ 1 ] Digital display
    [ 2 ] Selector on/off/summer/winter/reset/heating temperature/activation of the Clima Amico system
    [ 3 ] Domestic hot water temperature selector/preheating activation
    [ 4 ] Hydrometer


    Characteristics:

    • Class A+ system without the addition of options
    • Specific for use in built-in BOX
    • Low consumption modulating circulator (6 m head)
    • Low polluting emissions: class 5 (UNI EN 483)
    • New condensing exchanger in aluminum with high flow rate and front access
    • Thermoregulation with standard external probe
    • REC 08 remote control panel as standard
    • Antifreeze kit available up to -10°C (optional)
    • Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP
    • IPX5D electrical protection degree
    • Plumbing fittings, gas and sanitary taps supplied
    • For gas conversion, contact authorized Beretta Technical Assistance Centres

    Product Guarantee

    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 50.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane
    • marca: BERETTA
    • metri quadri : 150
    • modello: CALD_20096647
    • potenza in kw: 25
    • potenza nominale: 25
    • superficie riscaldabile mq: 150
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account