Baxi Duo-Tec Compact E 28 kW low NOx condensing boiler complete with methane or LPG fume exhaust kit - News Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 28.9 Heating nominal heat input kW 24.7 Seasonal space heating energy efficiency ŋs % 93 Emissions of nitrogen oxides NOx mg/kWh 17 Minimum operating temperature °C -5 Expansion vessel capacity l 7 Heating circuit water temperature adjustment °C 25-80 Domestic hot water production ∆T 25°C (1) l/min 16.1 DHW circuit minimum water flow rate l/min 2 Expansion vessel capacity l 7 Dimensions (hxlxp) mm 700x400x299 Degree of protection IPX5D NB: LPG OPERATION THROUGH ADJUSTMENT FROM THE AUTHORIZED SERVICE CENTER DUO-TEC COMPACT E range New design: change the aesthetics, not the performance. Luna Duo-tec E and Duo-tec Compact E: the already well-known Baxi boilers present themselves today with a new aesthetic, increasingly modern and attentive to new design trends, which allows them to be inserted in any living context. The control panel has also been completely renewed and is equipped with a new backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys. The new boilers, even more beautiful and modern thanks to the restyling, however keep intact the characteristics that have always distinguished the Duo-tec range: Reliability. Robustness, durability and reliability in performance; Efficiency and savings. The reduction of the on/off cycles translates into considerable benefits in terms of energy savings and lower emissions; Completeness of range. Heating only models, with instantaneous DHW production, and also the compact version with the possibility of outdoor installation. The range has been further enriched with the new models equipped as standard with the Baxi Ma go (duo tec mago) modulating chronothermostat with integrated wi-fi The ideal boiler for new builds and replacements The Duo-tec E range of gas condensing boilers have been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make them particularly suitable for both new builds and replacement old generator. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created for the final consumer, so that, through real and comparable data, he can make informed choices by targeting high-efficiency products. Exchanger preheating function The boilers in the Duo-tec E range are equipped with the exchanger pre-heating function which guarantees the immediate production of domestic hot water at the set comfort temperature. In fact, the sanitary water passing through the plates of the preheated exchanger is already supplied at the desired temperature without waiting times. The function can be easily activated/deactivated by a specific boiler parameter Boiler info By pressing the dedicated key , it is possible to view numerous information regarding boiler operation such as: heating system water pressure (electronic pressure transducer present in the hydraulic unit); heating flow/return temperature; external temperature (with external probe installed); domestic hot water temperature. Efficiency and savings greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions; adaptation of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises. Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: there are no manual interventions - reduced measuring, calibration or changing nozzles with this system, the boiler self-adapts to the quality of the gas and the length of the flue gas pipes, keeping efficiency constant the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions Outdoor installation Duo-tec Compact E boilers can be installed outdoors in partially protected places thanks to the new top cover kit and bottom closure kit (available as accessories). In fact, the Duo-tec Compact E range is equipped AS STANDARD with an electronic antifreeze system which guarantees operation down to a temperature of -5 °C: the IPX5D protection also protects the electrical parts from jets of water which may come from all directions. New modern and elegant design for the whole range Wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display New cover kit: possibility of outdoor installation in partially protected places (optional accessory) Rigid and flexible Ø50 mm exhaust pipe connection: solution for restoring flues - for mod. 24 kW total length 40 meters (intake+exhaust) Compact dimensions: 700x400x299 mm hydraulic system Electric three-way diverter valve Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense even in DHW operation Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch that blocks the gas in the event of a water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit pressure gauge Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 24/28 AS/1-1 Article code : 0010026088 Power supply: methane Performance Heating power : 6.9 ~ 23.9 kW Nominal heat input in DHW : 6.9 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 108.2% Domestic hot water production (ΔT = 30K): 13.4 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Baxi Luna Classic 28 kW low NOx condensing boiler complete with methane or LPG fume exhaust kit New optional Wi-Fi Technical features Sanitary nominal thermal power kW 28.9 Heating rated thermal power kW 24.7 Useful thermal power at thermal power nom. and high temp. regime* P4 kW 24 XL load profile Seasonal space heating energy efficiency class A Water heating energy efficiency class A Seasonal space heating energy efficiency ?s % 94 Minimum operating temperature °C -5 Heating expansion vessel capacity l 7 Sanitary water production ?T 25°C (1) l/min 16.1 Dimensions (hxwxd) mm 700 x 395 x 285; 30 Degree of protection IPX5D CLASSIC MOON The new Luna Classic is the ideal product for apartments or small houses. Its compact dimensions (700x395x285 mm) ne allow installation in confined spaces such as kitchen wall units or in the laundry room. Excellent value for money, simple and intuitive management. The heart of the Luna Classic is the new electronic platform: this revolutionary system replaces the functions of the historical Luna models, raising the quality of the product to a new level. Great attention has been paid to meeting the needs of the end user. System customization and optimization are possible without compromising ease of use. The Luna Classic range includes 2 models for heating and the instantaneous production of domestic hot water, Luna Classic 24 and Luna Classic 28 User Interface Luna Classic Control Panel Renewed interface with: Backlit menu with icons; Simple settings to adjust the heating and domestic hot water temperature via two dedicated knobs; 4 buttons with dedicated functions: menu, confirm, back and reset. 2 functions for perfect water temperature Domestic hot water management can be enhanced and improved by activating two dedicated functions: relaxation function It is a pre-heating function which keeps the domestic hot water at the desired temperature for a pre-set period of time, or for 30 minutes after selecting the chosen temperature. Boost function Activates the boiler at maximum power for faster delivery of hot water. Baxi MaGO Luna Classic can be connected directly to the Baxi Mago, the modulating chronothermostat with integrated wi-fi that allows you to manage home comfort directly from an App. By downloading the dedicated App onto your smartphone, it will be possible to connect to one or more homes to control the temperature, manage the programming, display the consumption graph, read any messages error, set vacation mode, etc. The combination of the boiler with the Baxi Mago A+ kit increases its energy efficiency, raising it to class A+ Specifications: Operation with a mixture composed of up to 20% hydrogen New single coil stainless steel heat exchanger, featuring sections with large water passages for greater seasonal thermal efficiency Seasonal energy efficiency of 94% thanks to the advanced technology applied Renewed interface with backlit display Easy replacement of conventional boilers thanks to central flue gas outlet Modulation range 1:5 greater efficiency and silence Ø80 double exhaust STANDARD Connection to Ø50 mm rigid and flexible waste pipe: solutions for the rehabilitation of flues total length (exhaust + intake) 40 meters Connection to pressurized collective flues Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) Compact dimensions: 700x395x285 mm Class A+ for Luna Classic 24/28 models with Baxi Mago and external probe (as accessories) New hydraulic group that guarantees maximum levels of performance and durability over time Optimal insulation for silent operation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

PLEASE NOTE! THE BOILER WILL BE SUPPLIED WITH METHANE, THE TRANSFORMATION TO LPG WILL TAKE PLACE THROUGH THE SERVICE CENTER FOR FREE! Select the smoke kit in the drop-down menu! Technical features Model : Thematek Condens Power : 28 kW Gas : Methane or LPG Heating efficiency class: A Sanitary efficiency class: A Sanitary load profile XL Maximum pressure at the burner Natural gas G20 (min/max): 2.10/13 mbar Consumption at (min/max) power Natural gas G20: 1.12/2.8 m3/h Maximum pressure at the LPG G30 burner (min/max): 5.3/32.7 mbar Consumption at (min/max) power Natural gas G30: 0.82/2.05 m3/h Dimensions: (HxWxD): 740x410x310 mm; Weight: 34 Kg Connections: gas Ø3/4” heating Ø3/4” sanitary Ø1/2” Thematek Condens The optimal solution for heating and domestic hot water preparation. Excellent value for money, both for new builds and replacements It can be retrofitted into existing heating and hot water supply systems Heat exchanger in stainless steel The Thematek Condens boiler is available in 24 and 28 kW methane power. The most important novelty concerns the renewed primary exchanger , the old one in Al-Si has been replaced by the one in stainless steel which, through a simple adjustment of the gas valve, also allows operation with propane. Innovation also from the point of view of combustion : complete premixing with new fan-push technology where the fan in the new position upstream of the burner guarantees the right ratio between air and gas by applying a proportional pressure value which guarantees the opening of the gas valve without waste. The project has been developed to offer the optimal solution in terms of price , performance and quality . Thematek Condens also presents a new design of the ultra-compact hydraulic block with a new position of the key components, while still maintaining a good level of efficiency, performance and adequate comfort both in heating and in the production of domestic hot water. Characteristics The new design of Thematek Condens offers an innovative touch screen interface of extreme simplicity with 6 keys, display with black background and 2 white digits with flashing on, the boiler status indication is defined by the flashing on of the icon selected. Thematek Condens is compatible with all Hermann Saunier Duval components and accessories already on the market. Thematek Condens can also be combined with the MiGo WiFi control unit. The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Ease of installation SemiaTek Condens is very simple to install thanks to its small size - 62.6cm high, 40cm wide and 27cm deep - and low weight. Even the vertical hydraulic connections have been designed to facilitate and speed up installation. For these reasons, it is the ideal solution for replacing old systems. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ARISTON GAS BOILER model CLAS X 28 CF METHANE Low NOx OPEN CHAMBER Technical features. Product code: 3301314 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency B XL withdrawal profile Technical specifications Rated heat input max/min (heating) PCI: 29.5-13kW Nominal heat input max/min (sanitary) PCI: 29.5-13 kW Max/min useful heat output (heating): 26.6-11.6kW Efficiency at nominal heat input PCI: 90.2% Efficiency at 30% of nominal flow rate PCI: 90.3% Max/min heating temperature: 82-35°C DHW max/min temperature: 60-36°C Port. specific in healthcare (10 min. with ΔT=30°C): 13.2 litres/min Quantity of hot water (ΔT=25°C): 15.8 l/min Quantity of hot water (ΔT=35°C): 11.3 l/min Minimum ambient temperature of use: 5°C Supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 52,1W Degree of protection of the electrical system IP X4D Dimensions mm (HxWxD) 745 x 400 x 315 Power supply: methane or LPG Functionality AUTO, Comfort functions Internal, installation in branched collective pipe with natural draft Characteristics LCD display Continuous modulation high efficiency circulator Prepared for Ariston Net connectivity Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Copper finned primary exchanger Cold water inlet and heating return filters Low NOx emissions < 56 mg/kWh Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: THE CURVE AND THE PIPE FOR THE COAXIAL KIT MUST BE PURCHASED SEPARATELY Rinnai Condensing Boiler Momiji 29 kW Complete with Fume Exhaust Kit with Integrated Wi-Fi Chronothermostat Low NOx Methane REB-KAI2529FF Code RREB-KAI2529FF Heating energy class A XL load profile Nominal thermal power kW 24 EN677 efficiency on PCI (80-60°C) % 96.1 Nominal power modulation (80-60°C) Heating kW 8.2 - 23.8 NOx class 6 Maximum electric power absorbed in heating W 98 Electrical power in stand-by W < 3 Supply voltage V/Hz 230 / 50 Degree of protection IPX5D Domestic hot water delivery (ΔT=35°C) l/min 11.6 Domestic hot water delivery (ΔT=25°C) l/min 16.3 Dimensions (H x W x D) (mm)660x440x285 MOMIJI The warm embrace of autumn MOMIJI are the red maple trees typical of the Orient, whose leaves color autumn red, a season that the Japanese experience as "comfort". Thanks to the mild climate and temperatures that are once again welcoming (no longer the torrid heat of summer, not yet the freezing climate of winter), taking time out is even more pleasant. Enjoying your home, as well as the foliage, gives well-being. Momiji best interprets the combination of traditional systems and condensing technology. In fact, while integrating perfectly with different systems, it is designed to optimize the condensation technology on radiator systems, responding concretely to the needs for savings and eco-sustainability of this type of heating, extremely widespread but often unable to fully exploit the advantages of condensation. The heating is smart Momiji offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adjusting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Momiji Comfort has never been easier Easy, everywhere Like the Rinnai Infinity water heaters, the Momiji boilers are also specifically designed to facilitate the installer's work. The device is small, light and compact. It is ready to use and does not need to be configured. The flue system is split Ø80/80 and, thanks to the high prevalence of the fan, it is possible to reach up to 30 equivalent linear metres. Thermal exchange Momiji has a copper heat exchange, with a large passage section: this facilitates integration into existing radiator systems and simplifies cleaning operations. This range of boilers is the perfect solution for often imperfect traditional systems. Can also be installed outdoors Momiji is IPX5D certified and has the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection Integrated condensate neutraliser The Momiji series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutralizer, in fact, allows you to eliminate the acidity of the condensate (acidic pH water produced by the normal operation of the heat generator, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory that performs this function otherwise essential. Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Open Chamber boiler mod. START 28 KI Low NOx - NEW ErP CODE 20151435 Product code: 20151435 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Thermal input: 31.90 kW Thermal power (80-60°C): 28.87 kW Reduced heat input: 14.00 kW Reduced thermal power (80-60°C): 12.36 kW Thermal input: 31.90 kW Reduced heat input: 9.00 kW Reduced thermal power: 7.95 kW Minimum operating pressure: 0.25-0.45 bar Quantity of hot water with Δt 25°C: 16.6 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37-60°C Flow regulator: 10 l/min NOx class: 6 Dimensions HxWxD 450x332x740 mm; Weight: 30 Kg Natural gas supply START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for a quicker achievement of the desired comfort and a reduction in consumption, and in the temperature ranges in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

 ATTENZIONE  LA CALDAIA È IN GRADO DI FUNZIONARE A METANO. GPL E ARIA PROPANATA SENZA L'UTILIZZO DI KIT DI CONVERSIONE AGGIUNTIVI. PER INFO, CONTATTARE PREVENTIVAMENTE IL CENTRO ASSISTENZA AUTORIZZATO DI ZONA Caldaia Ferroli Bluehelix Maxima 28C a condensazione completa di kit scarico fumi Wi-Fi Optional Classe A Metano o Gpl - NOVITA' 0TSB4MWASpecifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica riscaldamento Classe A+ (in abbinamento al comando connect) Efficienza energetica sanitario profilo XL Classe A Caratteristiche esercizio riscaldamento/sanitario: Portata termica max riscaldamento (Hs) kW 24,5 Portata termica max sanitario (Hi) kW 28,5 Rendimento 30% % 109,7 Classe di emissione NOx (EN 15502-1) - 6 Capacità vaso di espansione riscaldamento litri 8 Portata sanitaria ∆t 25°C l/min 16,1 Grado protezione IP X4D Tensione di alimentazione V/Hz 230V / 50Hz Dimensioni AxLxP mm 700x420x320 Metano o Gpl M.G.R: Metano, Gpl, Aria propanata Ready. La caldaia è in grado di funzionare a metano, gpl ed aria propanata senza l’utilizzo di kit di conversione aggiuntivi Bluehelix Maxima - Funzionalità alla maxima espressioneLe linee esclusive di BLUEHELIX MAXIMA innovano radicalmente il concept estetico finora proposto attraverso l’impiego del cristallo e l’uso rivoluzionario delle forme curve. Un ambiente LED multicolore, incastonato in posizione centrale, permette di percepire anche a livello cromatico visivo lo stato e le modalità di funzionamento della caldaia. L’ampio display full touch screen a colori da 7’’ integrato nella superfice frontale di vetro nero temperato consente all’utente di interagire in modo totalmente smart con il prodotto grazie anche all’abbinamento col comando remoto smart CONNECT gestibile da app iOS e Android. Concepita per soddisfare a pieno le richieste di un prodotto «robusto» sotto ogni punto di vista: scambiatore termico primario a passaggi elevati, scambiatore secondario sanitario potenziato a 20 piastre, circolatore ad elevata prevalenza, nuova elettronica di controllo. Tutti questi elementi sono progettati in modo da garantire massima efficienza ed affidabilità nel tempo anche, e non solo, in sostituzione di vecchi generatori in impianti particolarmente sporchi: ideale per la sostituzione «senza pensieri»SILENZIOSITÀ MAXIMA: SOLO 45 dBLa progettazione particolarmente curata di BLUEHELIX MAXIMA ha consentito di raggiungere valori significativi in termini di silenziosità e comfort acustico, tanto che si potrebbe quasi far fatica a distinguere il rumore di fondo di una abitazione dalla rumorosità prodotta dalla caldaia durante il funzionamento a regime. Anche i transitori di accensione/spegnimento della caldaia sono stati ottimizzati in funzione del comfort acustico, cosicché al cliente non toccherà più il fastidio di capire se la caldaia è accesa o spenta dalla sua rumorosità come sulle vecchie generazioni di caldaieINNOVAZIONE MAXIMASviluppare soluzioni sostenibili e a basso impatto ambientale in grado di contrastare il surriscaldamento climatico ora è una realtà! BLUEHELIX MAXIMA è già in grado di auto-regolarsi autonomamente (plug-in) e funzionare correttamente in totale sicurezza con miscele di gas naturale arricchite con l’idrogeno già previste in distribuzione in Europa (*)IL CONTROLLO IN CALDAIAL’innovativa elettronica di controllo e gestione di BLUEHELIX MAXIMA si pone ai massimi livelli della categoria. L’ampio display grafico a colori full touch screen da 7’’ permette la visualizzazione in tempo reale delle informazioni di funzionamento grazie a schermate grafiche semplici ed intuitive. Con un semplice tocco è possibile impostare i set point di temperatura per il riscaldamento e l’acqua calda sanitaria. Grazie alla guida contestuale, BLUEHELIX MAXIMA informa direttamente l’utente delle possibili cause di anomalia fornendo al tempo stesso al tecnico abilitato indicazioni su possibili soluzioni da intraprendere. Anche la pressione di impianto non è più un problema perché grazie alla funzione di elettrocaricamento impianto semi-automatica basta un semplice ‘’touch’’ e la caldaia ripristina automaticamente la pressione adeguata senza richiedere l’intervento manuale dell’utente.CONNECT Il controllo remoto Comando remoto fornito con il codice kit in classe A+ per la gestione del comfort domestico anche da Smartphone (*) Connessione alla rete WiFi domestica per l’accesso ad internet tramite ricevitore RF/WiFi a corredo Disponibile APP CONNECT per accensione/spegnimento caldaia e gestione del comfort domestico riscaldamento/sanitario da remoto tramite Smartphone (iOS e Android) Massimizzazione del comfort ambiente con regolazione modulante della temperatura di mandata tramite le funzioni di Compensazione Climatica Ambiente (CCA) e Compensazione Climatica Esterna (CCE) tramite temperatura esterna rilevabile direttamente da internet (o da sonda esterna opzionale) Migliora del +4% l’efficienza media stagionale in riscaldamento d’ambiente Programmazione oraria settimanale in intervalli da 30 minuti tramite APP CONNECT Visualizzazione allarmi anche tramite APP CONNECT Modalità di funzionamento: Off, Vacanza, Automatico, Manuale Tre livelli di temperatura modificabili: Comfort, Economy, Antigelo EFFICIENZA AL TOP ANCHE SU VECCHI IMPIANTI (SOSTITUZIONI) La geometria dello scambiatore del gruppo termico THERMOBALANCE™ di BLUEHELIX MAXIMA (figura A) consente il funzionamento quasi al massimo dell’efficienza di progetto anche in condizioni di parziale intasamento, mentre a parità di quantità di depositi e sedimenti (es. dovuti all’install azione su vecchi impianti) lo scambiatore tradizionale in figura B tende a otturarsi molto più velocemente nella parte a contatto con la fiamma a causa della ridotta area di passaggio del fluido, in cui si viene a costituire una vera e propria barriera di depositi* che ostacolano lo scambio termico e riducono l’efficienza al di sotto dei valori nominali.IL GRUPPO IDRAULICO POTENZIATO  Tutti i modelli della serie BLUEHELIX MAXIMA sono dotati di scambiatore a piastre sanitario potenziato a 20 piastre e di un circolatore riscaldamento potenziato ad al prevalenza da 7.5 m.c.a. Il notevole aumento della sezione di passaggio dello scambiatore a 20 piastre rispetto ad uno tradizionale (es. a 14 piastre) ne riduce fortemente l’intasamento nel tempo, anche in presenza di acque particolarmente dure, aumentando di molto la vita media dello stesso e riducendo al minimo i costi di manutenzione. La pompa potenziata di circolazione impianto da 7,5 metri di prevalenza consente a tutti i modelli di BLUEHELIX MAXIMA di poter funzionare correttamente erogando tutta la potenza necessaria anche in impianti ad elevate perdite di carico (impianti nuovi particolarmente estesi o vecchi impianti in presenza di incrostazioni). MC2 : MULTI COMBUSTION CONTROL L’elettronica controlla la corrente di ionizzazione di fiamma in modo da garantire una combustione ottimale al variare della densità dell’aria o della qualità del gas. La relazione tra il rapporto aria/gas (λ) ed il segnale di ionizzazione di fiamma viene utilizzata per il controllo del rapporto aria gas stesso e quindi della combustione. MC2: Multi Combustion Control, il nuovo sistema di combustione con tecnologia brevettata gas-adaptive migliora l’adattabilità di utilizzo al variare delle condizioni della rete gas (es. fluttuazioni o ridotte pressioni). Inoltre la nuova elettronica di controllo consente di raggiungere elevati campi di modulazione che possono arrivare fino a 1:12 per il modello 34C. In questo modo BLUEHELIX MAXIMA è in grado di adeguarsi alla potenza effettiva richiesta dall’impianto con estrema facilità ed efficienza, evitando fastidiosi funzionamenti di tipo on/off che aumentano i costi di esercizio e riducono la vita media del prodotto.CARATTERISTICHE Estetica con linee esclusive (Patent) che innovano radicalmente il concetto di design attraverso l’impiego del cristallo temperato e delle forme curve Ricca disponibilità di accessori opzionali: kit comando remoto wi-fi CONNECT gestibile tramite App, kit idraulici di collegamento (5 tubi, 4 rubinetti), carter copri-attacchi Caldaia con scambiatore primario in acciaio inox ad elevato spessore, con passaggi maggiorati a garanzia della durata e della ridotta manutenzione Circolatore riscaldamento modulante potenziato ad elevata prevalenza su tutti i modelli in grado di adattarsi anche ad impianti particolarmente resistenti Elettrocaricamento impianto semi-automatico di serie Scambiatore sanitario potenziato ad elevato numero di piastre particolarmente immune agli intasamenti ed in grado di mantenere costanti nel tempo la capacità di produzione dell’acqua calda sanitaria grazie all’abbinamento al comando remoto modulante CONNECT ed alla lettura della temperatura esterna direttamente da internet, raggiunge il massimo di efficienza energetica A+ (scala da G ad A+++) Si adatta agevolmente alle condizioni di carico grazie all’ampio range di modulazione che può arrivare fino a 1:12 (mod. 34C, 1:10 mod. 28C) MC2 : Multi Combustion Control, nuovo sistema di combustione con tecnologia brevettata gas-adaptive per una migliore adattabilità di utilizzo al variare delle condizioni della rete gas Display touch screen grafico a colori da 7 pollici Visualizzazione immediata dello stato di funzionamento grazie al led multicolore frontale Particolarmente adatta al funzionamento in canne fumarie che necessitano di intubamenti “pesanti”, grazie al funzionamento con scarichi fumo diametro 50 mm Progettata per semplificare ed agevolare le normali operazioni di manutenzione e pulizia grazie al facile accesso ai componenti interni Cablaggio elettrico semplificato che non richiede la rimozione del mantello della caldaia grazie all’accesso diretto alla morsettiera esterna di collegamento disponibile sulla parte inferiore del prodotto Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto

Read more less

Caratteristiche tecniche Modello : Residence IN 30 IS Codice prodotto : 20197311 Potenza nominale : 24,0 kW Alimentazione : Metano/gpl Efficienza energetica Classe di efficienza energetica stagionale del riscaldamento : A Efficienza energetica stagionale del riscaldamento : 93% Consumo energetico annuo : 56 GJ Potenza termica utile Potenza termica nominale e a regime di alta temperatura : 24,4 kW Potenza termica nominale e a regime di bassa temperatura : 8,2 kW Efficienza utile Alla potenza termica nominale e a regime di alta temperatura : 87,6 % Al 30% potenza termica nominale e a regime di bassa temperatura : 98,2 % Consumi elettrici ausiliari A pieno carico : 38,0 W A carico parziale : 12,0 W In modalità Stand-by : 3,0 W Performance in riscaldamento Portata termica : 3,95 ~ 25,0 kW Pressione massima : 3 bar Temperatura massima : 90° C Dati installativi Diametro tubo entrata / uscita riscaldamento : 3/4" Dimensioni e peso Dimensioni (AxLxP) : 740x420x275 mm Peso : 31,0 Kg Caldaia murale a condensazione Riello RESIDENCE IN La soluzione efficiente, dove lo spazio fa la differenza Residence In è la soluzione Riello pensata per le esigenze installative in cui lo spazio fa la differenza e per un comfort senza compromessi. Residence In si distingue per compattezza, flessibilità applicativa e ampia disponibilità di accessori che garantiscono la compatibilità e retrocompatibilità anche nei box Riello più piccoli.  Lo scambiatore primario, interamente realizzato in acciaio inox e con accessibilità frontale alla camera di combustione, e lo scambiatore a piastre ottimizzato assicurano la massima efficienza e affidabilità nel tempo e garantiscono un comfort elevato, sia in riscaldamento che in sanitario Con RESIDENCE IN, Riello continua il percorso di rinnovamento della propria offerta murale in chiave eco-compatibile. L’ampio range di modulazione 1 : 8, le bassissime emissioni di NOx, che posizionano la gamma in Classe 6 (la migliore secondo gli standard europei), e la predisposizione per il funzionamento con miscele di gas naturale e idrogeno – fino a un massimo del 20% - sono solo alcune tra le caratteristiche che qualificano RESIDENCE IN come la caldaia ideale per un’installazione di valore nel tempo, dal minimo impatto ambientale ed estetico. Installazione universale Massima flessibilità installativa sia all’interno, all’esterno (in luogo parzialmente protetto) e a incasso in box Interfaccia digitale  Interfaccia dal design moderno, che si distingue per l’intuitività di utilizzo, comunicando con l’utente per mezzo di icone e testi scorrevoli. Basse emissioni La migliore in termini di rispetto ambientale a livello europeo Compattezza e flessibilità per un'installabilità universale RESIDENCE IN è la soluzione ideale per la sostituzione, oltre che per la nuova edilizia. Le dimensioni ridotte del prodotto, unitamente alla disponibilità di una gamma articolata di kit accessori per ogni tipo di applicazione, facilitano e velocizzano l’installazione, anche in piccoli box pre-esistenti. RESIDENCE IN, come suggerisce il nome, è la nuova caldaia Riello pensata in primis per l’installazione a incasso in box. Grazie alle ridotte dimensioni e alla disponibilità di una gamma dedicata di kit accessori, RESIDENCE IN è compatibile e retrocompatibile con le varie tipologie di box Riello. La nuova soluzione Riello, in caso di sostituzione di un modello a incasso, assicura all’utente un notevole risparmio, evitandogli sia l’acquisto di un nuovo box, che eventuali spese murarie per adeguare lo spazio della nicchia. Inoltre, gli attacchi idraulici con sequenza Riello rendono la sostituzione con le vecchie caldaie ancor più facile e immediata. L’installabilità a incasso è un plus anche per la nuova edilizia, permettendo di risparmiare spazio sempre più prezioso all’interno dell’abitazione e riducendo al minimo l’impatto estetico in facciata. Adatta per l'esterno RESIDENCE IN, grazie al grado di protezione IPX5D e al kit accessorio antigelo fino a -15°C, può essere installata anche all’esterno dell’abitazione, in luogo parzialmente protetto. Design moderno e utilizzo intuitivo RESIDENCE IN è dotata di un pannello di controllo dalle linee razionali e moderne, che si distingue per la semplicità di utilizzo. Attraverso il display LCD retroilluminato, che comunica con l’utente mediante icone e testi scorrevoli, è possibile accedere facilmente a tutte le funzioni di RESIDENCE IN. Un cuore d'acciaio per la massima efficienza RESIDENCE IN è dotata di un nuovo scambiatore primario in acciaio INOX, con tubo liscio ad elevata sezione, in grado di assicurare la migliore efficienza e pulizia nel tempo. L’acciaio INOX, oltre all’elevata resistenza all’azione corrosiva della condensa acida, previene la formazione interna di ossidi e di altri fenomeni elettrochimici tipici delle installazioni in vecchi impianti. La geometria a spira unica avvolta (circuito idraulico in serie) assicura una portata costante in tutte le sezioni dello scambiatore e previene intrinsecamente fenomeni di intasamento. L’accesso frontale agevola le operazioni periodiche di manutenzione e pulizia della camera di combustione. Funzionamento silenzioso RESIDENCE IN, distinguendosi per la silenziosità operativa, rappresenta la scelta ottimale anche per l’installazione in locali non tecnici, ad esempio in caso di sostituzione in una cucina. Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Caratteristiche tecniche Modello : Residence IN 30 KIS Codice prodotto : 20189652 Potenza nominale : 24,0 kW Alimentazione :Metano/gpl (con kit di trasformazione) Efficienza energetica Classe di efficienza energetica stagionale del riscaldamento : A Classe di efficienza energetica del sanitario : A Efficienza energetica stagionale del riscaldamento : 93% Consumo energetico annuo : 56 GJ Potenza termica utile Potenza termica nominale e a regime di alta temperatura : 24,4 kW Potenza termica nominale e a regime di bassa temperatura : 8,2 kW Efficienza utile Alla potenza termica nominale e a regime di alta temperatura : 87,6 % Al 30% potenza termica nominale e a regime di bassa temperatura : 98,2 % Consumi elettrici ausiliari A pieno carico : 38,0 W A carico parziale : 12,0 W In modalità Stand-by : 3,0 W Performance in riscaldamento Portata termica : 3,95 ~ 25,0 kW Pressione massima : 3 bar Temperatura massima : 90° C Performance in sanitario Portata ACS minima : 2 l/min Pressione massima : 8 bar Produzione ACS : 12,3 ~ 14,3 ~ 17,2 kW Dati installativi Diametro tubo entrata / uscita riscaldamento : 3/4" Diametro tubo entrata / uscita sanitario : 1/2" Dimensioni e peso Dimensioni (AxLxP) : 740x420x275 mm Peso : 33,0 Kg Caldaia murale a condensazione Riello RESIDENCE IN La soluzione efficiente, dove lo spazio fa la differenza Residence In è la soluzione Riello pensata per le esigenze installative in cui lo spazio fa la differenza e per un comfort senza compromessi. Residence In si distingue per compattezza, flessibilità applicativa e ampia disponibilità di accessori che garantiscono la compatibilità e retrocompatibilità anche nei box Riello più piccoli.  Lo scambiatore primario, interamente realizzato in acciaio inox e con accessibilità frontale alla camera di combustione, e lo scambiatore a piastre ottimizzato assicurano la massima efficienza e affidabilità nel tempo e garantiscono un comfort elevato, sia in riscaldamento che in sanitario Con RESIDENCE IN, Riello continua il percorso di rinnovamento della propria offerta murale in chiave eco-compatibile. L’ampio range di modulazione 1 : 8, le bassissime emissioni di NOx, che posizionano la gamma in Classe 6 (la migliore secondo gli standard europei), e la predisposizione per il funzionamento con miscele di gas naturale e idrogeno – fino a un massimo del 20% - sono solo alcune tra le caratteristiche che qualificano RESIDENCE IN come la caldaia ideale per un’installazione di valore nel tempo, dal minimo impatto ambientale ed estetico. Installazione universale Massima flessibilità installativa sia all’interno, all’esterno (in luogo parzialmente protetto) e a incasso in box Stabilità di acqua calda sanitaria Acqua calda senza oscillazioni di temperatura, per un comfort ottimale durante i prelievi Interfaccia digitale  Interfaccia dal design moderno, che si distingue per l’intuitività di utilizzo, comunicando con l’utente per mezzo di icone e testi scorrevoli. Basse emissioni La migliore in termini di rispetto ambientale a livello europeo Compattezza e flessibilità per un'installabilità universale RESIDENCE IN è la soluzione ideale per la sostituzione, oltre che per la nuova edilizia. Le dimensioni ridotte del prodotto, unitamente alla disponibilità di una gamma articolata di kit accessori per ogni tipo di applicazione, facilitano e velocizzano l’installazione, anche in piccoli box pre-esistenti. RESIDENCE IN, come suggerisce il nome, è la nuova caldaia Riello pensata in primis per l’installazione a incasso in box. Grazie alle ridotte dimensioni e alla disponibilità di una gamma dedicata di kit accessori, RESIDENCE IN è compatibile e retrocompatibile con le varie tipologie di box Riello. La nuova soluzione Riello, in caso di sostituzione di un modello a incasso, assicura all’utente un notevole risparmio, evitandogli sia l’acquisto di un nuovo box, che eventuali spese murarie per adeguare lo spazio della nicchia. Inoltre, gli attacchi idraulici con sequenza Riello rendono la sostituzione con le vecchie caldaie ancor più facile e immediata. L’installabilità a incasso è un plus anche per la nuova edilizia, permettendo di risparmiare spazio sempre più prezioso all’interno dell’abitazione e riducendo al minimo l’impatto estetico in facciata. Adatta per l'esterno RESIDENCE IN, grazie al grado di protezione IPX5D e al kit accessorio antigelo fino a -15°C, può essere installata anche all’esterno dell’abitazione, in luogo parzialmente protetto. Design moderno e utilizzo intuitivo RESIDENCE IN è dotata di un pannello di controllo dalle linee razionali e moderne, che si distingue per la semplicità di utilizzo. Attraverso il display LCD retroilluminato, che comunica con l’utente mediante icone e testi scorrevoli, è possibile accedere facilmente a tutte le funzioni di RESIDENCE IN. Un cuore d'acciaio per la massima efficienza RESIDENCE IN è dotata di un nuovo scambiatore primario in acciaio INOX, con tubo liscio ad elevata sezione, in grado di assicurare la migliore efficienza e pulizia nel tempo. L’acciaio INOX, oltre all’elevata resistenza all’azione corrosiva della condensa acida, previene la formazione interna di ossidi e di altri fenomeni elettrochimici tipici delle installazioni in vecchi impianti. La geometria a spira unica avvolta (circuito idraulico in serie) assicura una portata costante in tutte le sezioni dello scambiatore e previene intrinsecamente fenomeni di intasamento. L’accesso frontale agevola le operazioni periodiche di manutenzione e pulizia della camera di combustione. Comfort sanitario elevato Grazie al nuovo scambiatore a piastre high performance, RESIDENCE IN offre un elevato comfort in sanitario, con disponibilità di acqua calda in tempi brevi e un’ottima stabilità della temperatura di erogazione. Funzionamento silenzioso RESIDENCE IN, distinguendosi per la silenziosità operativa, rappresenta la scelta ottimale anche per l’installazione in locali non tecnici, ad esempio in caso di sostituzione in una cucina. Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Overview GAS BOILER JUNKERS BOSCH mod. CONDENS 7000i GC7000iW 28 kW METHANE CONDENSING + FLUE KIT - WHITE - ErP Technical specifications For heating and domestic hot water production Heat and DHW energy efficiency class (ErP) Seasonal space heating energy efficiency ns % 93 Useful efficiency (Hi - 50/30 °C) % 100 Modulation range 1:8 Nox class 6 Net weight) kg 43 Dimensions (L x W x H) mm 350x440x840 SMOKE EXHAUST KIT INCLUDED IN THE PRICE! By Regional Resolution, only boilers with the NOx 6 characteristic can be installed in the Lombardy and Piedmont regions Main features CONDENS 7000i W Design and innovation love at first sight. Ask her for the best, she will give it to you. Aesthetics, innovation and savings. The new Condens 7000i W wall-hung gas condensing boiler has a refined and exclusive design, with a black or white titanium tempered glass shell, and a heart full of technological innovations. Simple to use, it guarantees you high savings and low consumption. Condens 7000i W is available in several versions to satisfy all your heating and hot water needs: heating only version (with power of 14 and 24 kW) and combined version to also produce domestic hot water (with power of 24, 28 and 35 kW). Designed to offer you excellence Whether you want to modernize your heating system or you are looking for a boiler for your new home, the advantages of Condens 7000i W are a guarantee: by choosing this boiler you can ensure only the best under every point of view. Consumption only according to your needs Condens 7000i W automatically adjusts power and consumption to your real domestic comfort and hot water needs, reducing waste. Furthermore, the condensing technique makes it possible to exploit the heat of the exhaust gases, increasing the efficiency of the boiler. Control your system via the dedicated App Condens 7000i W is perfectly compatible, in the case of single-zone heating systems, with the Bosch CT100 digital thermostat. This refined and elegant thermostat allows you to adjust the heating based on your presence in the house and allows you, thanks to the Bosch Control app*, to control your boiler wherever you are and at any time. Only the best for you: quality is Bosch Thanks to the use of top quality components, such as the aluminum-silicon alloy heat exchanger designed, patented, built and guaranteed by Bosch, the reliability of this boiler over time is a certainty you can always count on. White or Black: a question of style Choosing it is a real pleasure Condens 7000i W is the optimal choice for those looking for beauty and innovation. The refined and captivating design, with titanium tempered glass casing with rounded corners, available in the white or black version, is ideal for adapting to all domestic environments, even the most modern and sophisticated. This innovative material gives your boiler many advantages: it is robust, unbreakable, easy to clean and does not show signs of ageing. Thanks to the elegant and refined look, the boiler is transformed into a real piece of furniture. Condens 7000i W is designed to simplify installation and maintenance operations by specialized technical personnel as much as possible. Once opened, Condens 7000i W will never cease to amaze you. Quick and easy installation Condens 7000i W includes the pre-installation plate as an accessory to facilitate assembly; it is also compatible with the connections of the previous models of Junkers Bosch wall boilers, so as to be able to use the existing water and gas connections and save time. Quick and easy maintenance The internal design of the Condens 7000i W allows easy access to all components, which are clearly recognizable at first glance. The industrial design of this boiler means that it is assembled in a modular and orderly manner, guaranteeing speed and precision in maintenance operations. All-round reliability Bosch carefully selects all components, focusing on quality. The electronics are developed by Bosch; the heart of the boiler, the aluminum-silicon alloy exchanger, is also developed, produced, certified and guaranteed directly by Bosch. The aluminum-silicon alloy resists temperature swings, giving the exchanger qualities of lightness, sturdiness, efficiency and silence. It adapts to every need The wide continuous modulation of the power of Condens 7000i W, with a range up to 1:8, will make it possible to satisfy all comfort and consumption needs. The wide modulation is allowed by the Venturi tube, an innovation that makes the boiler highly efficient. Furthermore, the choice between LPG and methane is simplified to minimize setting operations. Intuitive and fast programming The circular and backlit display of Condens 7000i W allows fast and intuitive programming thanks to the easily understandable menu. Furthermore, the integrated climatic thermoregulation further simplifies the commissioning of the boiler. The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: o the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances or the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION, THE BOILER CAN BE ADJUSTED FOR LPG OPERATION. CONTACT YOUR LOCAL AUTHORISED SERVICE CENTRE Technical features Model : Condens GC7000iW 28 BC Product code : 7736901597 Color : Black Power supply: Methane/LPG Energy efficiency Energy efficiency class in ACS: A Energy efficiency class in heating: A Load profile: XL Performance Nominal thermal power: 24.0 kW Nominal heat output: 24.6 kW Nominal thermal power for domestic hot water: 28.0 Kw Seasonal space heating energy efficiency: 93.0 ηs % Seasonal DHW energy efficiency: 83.0 ηs % Sound power level: 50 dB(A) Class : NOx 6 Dimensions and weight Dimensions (DxWxH): 350x440x840 mm Weight: 43.0 Kg CONDENS 7000i W Design and innovation love at first sight. Ask for the best, she will give it to you. Aesthetics, innovation and savings. The new Condens 7000i W gas condensing wall-mounted boiler has a refined and exclusive design, with a white or black titanium tempered glass casing, and a heart full of technological innovations. Simple to use, it guarantees high savings and reduced consumption. Condens 7000i W is available in several versions to meet all your heating and hot water needs: heating-only version with 14 and 24 kW power, and combined version to also produce domestic hot water with 24, 28 and 35 kW power. Designed to offer you excellence Whether you want to modernise your heating system or you are looking for a boiler for your new home, the advantages of Condens 7000i W are a guarantee: by choosing this boiler you ensure only the best from every point of view. Consumption only according to your needs Condens 7000i W automatically adjusts power and consumption to your actual needs for domestic comfort and hot water, reducing waste. Furthermore, the condensation technique allows you to exploit the heat of the exhaust gases, increasing the efficiency of the boiler. Control your system via the dedicated App Condens 7000i W is perfectly compatible, in the case of single-zone heating systems, with the Bosch CT100 digital thermostat. This refined and elegant thermostat allows you to adjust the heating based on your presence at home and allows you, thanks to the Bosch Control app, to control your boiler wherever you are and at any time. For you only the best The quality is Bosch Thanks to the use of top-quality components, such as the aluminum-silicon alloy heat exchanger designed, patented, built and guaranteed by Bosch, the long-term reliability of this boiler is a certainty you can always count on. Black or white A question of style Choosing it is a real pleasure Condens 7000i W is the perfect choice for those seeking beauty and innovation. The refined and attractive design, with a titanium tempered glass casing with rounded corners, available in white or black, is ideal for adapting to all domestic environments, even the most modern and sophisticated. This innovative material gives numerous advantages to your boiler: it is robust, unbreakable, easy to clean and does not show signs of aging. Thanks to its elegant and refined look, the boiler transforms into a real piece of furniture. Unique on the outside, perfect on the inside Innovative technology... not just aesthetics! Condens 7000i W is designed to simplify installation and maintenance operations to the utmost by specialized technical personnel. Once opened, Condens 7000i W will never cease to amaze you. Quick and easy installation Condens 7000i W includes a pre-installation plate as an accessory to facilitate assembly; it is also compatible with the connections of previous Junkers Bosch wall-mounted boiler models, so you can use existing hydraulic and gas connections and save time. Quick and easy maintenance The internal design of the Condens 7000i W allows easy access to all components, which are clearly recognisable at first glance. The industrial design of this boiler means that it is assembled in a modular and orderly manner, ensuring speed and precision in maintenance operations. 360-degree reliability Bosch carefully selects all components, focusing on quality. The electronics are developed by Bosch; the heart of the boiler, the aluminum-silicon alloy exchanger, is also developed, produced, certified and guaranteed directly by Bosch. The aluminum-silicon alloy resists temperature fluctuations, giving the exchanger qualities of lightness, strength, efficiency and silence. Adapts to every need The wide continuous modulation of the power of Condens 7000i W, with a range of up to 1:8, will satisfy all comfort and consumption needs. The wide modulation is allowed by the Venturi tube, an innovation that makes the boiler highly efficient. Furthermore, the choice between LPG and methane is simplified to minimize setting operations. Intuitive and fast programming The Condens 7000i W display, circular and backlit, allows for fast and intuitive programming thanks to the easily understandable menu. In addition, the integrated climate control further simplifies the commissioning of the boiler. Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less