FERROLI BLUEHELIX K 50 32 Kw LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Product code: 20133714 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/sanitary performance DHW nominal heat input kW 25.00 Sanitary nominal thermal power kW 26.25 Nominal heat input Heating kW 20.00 Nominal thermal power Heating (80°/60°) kW 19.48 Useful efficiency Pn max - Pn min (80°/60°): 97.4 - 97.1% Useful efficiency 30% Pn max (30th return): 108% Overall electric power (max heating/DHW power): 87/97 W Supply voltage V-Hz 230-50 IP X5D degree of protection Warm-up exercise Maximum pressure: 3 bars Minimum pressure for standard operation: 0.25-0.45 bar Heating H2O temperature selection range: 20/45 ÷ 40/80 °C Pump: maximum head available for the system: 390 mbar at a flow rate of 1,000 l/h Membrane expansion tank: 10 lt Sanitary exercise Max-min pressure: 0.15/8bar Quantity of hot water: - with Δt 25°C l/min 15.1 - with Δt 30° C l/min 12.5 - with Δt 35° C l/min 10.8 Minimum domestic water flow rate l/min 2 Sanitary H2O temperature selection range °C 37-60 Dimensions Dimensions (hxwxd) mm 740 x 470 x 275 ; 35 kgs NOx class: 6 Power supply: CNG/LPG Dedicated codes are no longer necessary in the case of LPG because the new Family is able to automatically adapt its operation to the type of fuel General characteristics New Family: the best ever: The new Family is the Riello solution for the most demanding user. The primary exchanger, entirely made of stainless steel, guarantees maximum efficiency and reliability over time and the new optimized sanitary exchanger ensures exceptional comfort and the best class of merit (class A). The new Family is available with powers of 25, 30 and 35 kW, in instantaneous combined and heating only versions. ACC self-adaptive electronic combustion control Range Rated Approval Possibility of integration in hybrid systems via integrated ModBus protocol New panel with color display and intelligent system filling function 10 liter expansion tank High head, low consumption modulating circulator Modulation ratio 1:8 Standard flue gas flange with dedicated flue system Clapet valve and SRD device as standard Standard thermoregulation in combination with the external probe, available as an accessory Possibility of recessed installation (model 25 KIS) and outdoors in partially protected places (IPX5D) Assembly template, hydraulic fittings, power supply cable and hole plug for interface remote control supplied Kit for REC10 remote control in supplied room Plumbing fittings with shut-off system taps, gas tap and cold water supplied Ease of installation and wide choice of accessories New primary exchanger in stainless steel Riello has always designed its products with care and dedication. Continuous improvement leads today to the evolution of the Family condensing range, starting from its primary element: the exchanger. The new Family exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. Access remains from the front, to facilitate maintenance operations. FAMILY IS AVAILABLE IN 3 POWER LEVELS, IN COMBINED (KIS) AND HEATING ONLY (IS) VERSIONS FAMILY 25 - KIS AND IS VERSION FAMILY 30 - KIS VERSION FAMILY 35 - KIS AND IS VERSION Dedicated codes are no longer necessary in the case of LPG because the new Family is able to automatically adapt its operation to the type of fuel. The characteristics of Family and its compact dimensions make it the ideal solution for both indoor and recessed installation (25 kW model) or outdoors in a partially protected place. Control panel and functions Even clearer, more intuitive and easier to use, it integrates elegantly into the aesthetics of the machine. The large backlit display, the raised keys and the interface enriched with explanatory texts and icons help the user and the installer in navigation. Through the panel it is possible to view the operating status, carry out the programming and access the regulation of the boiler and system. The RiCLOUD intelligent remote control allows you to manage the comfort of your home in a simple and intuitive way, even when you are away from home. Through the dedicated app it is in fact possible to check the status of the heating system, but also to program the boiler's switching on and off, temperature and operating times directly from your smartphone or tablet. It is possible to manage up to 8 different zones, each controlled by its own RiCLOUD. RiCLOUD can also be installed in total wireless mode using a radio frequency receiver, available as an accessory, thus avoiding any electrical or masonry intervention. Intelligent system loading Through the panel it is possible to independently carry out the filling of the system, if the pressure drops below the minimum reference value. Information display In addition to the date and time, the display shows the basic information relating to boiler operation: the water delivery temperature and the system pressure. Via an icon on the display, the boiler also warns of the need to carry out scheduled maintenance. Programming Programming boiler operation according to your needs is easy and intuitive. From the panel it is possible to carry out the hourly and daily programming for each zone of the system. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER JUNKERS CERACLASS SMART ZWA 24-2 KE METHANE OPEN CHAMBER - ErP Technical features Heating and DHW energy efficiency class: C - B Declared load profile XL Open chamber with natural draft Nominal heat output: 24 kW Useful thermal efficiency at nominal power: 89.8% Useful thermal efficiency at 30% nominal load: 89.2% Continuous sanitary production: 11.4 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 3 Degree of protection: IP X4D Power supply: methane Characteristics Bithermal heat exchanger. Control panel with Bosch Cotronic. Heating flow temperature via luminous LEDs. Continuous power modulation. Protection systems: antifreeze for the heating circuit and antiblock for the circulator. Circulator in Energy Class A. 8 liter expansion vessel. Heating filling cock (in the boiler). External installation, in a partially protected place, in compliance with current legislation. Dimensions Dimensions (Depth x Width x Height): 355x400x750 mm Weight: 33Kg Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heat and DHW energy efficiency class (ErP) A For heating and domestic hot water production Declared load profile XL Nominal heat output: 23 kW Nominal heat input: 23.5 kW Nominal heat input max. domestic hot water (Qn,maxWW) [kW] 29.7 Useful efficiency at maximum power ηu,Hi,100% 40/30 °C [%] 103.0 Useful efficiency at minimum power ηu,Hi,30%40/30 °C [%] 108.3 Heating expansion vessel capacity [l] 7 DHW expansion vessel capacity [l] 2 NOx class (according to EN 15502/1) 6 Electrical protection degree [IP] X4D Weight [kg] 78 Dimensions (L x W x H) [mm] 482x600x890 CERAPUR ACU - SMART The new CERAPURACU-SMART condensing boiler thanks to the integrated 48-litre boiler guarantees high sanitary comfort. CERAPURACU-SMART keeps the water temperature constant even with several taps open at the same time. Robustness and reliability thanks to the primary heat exchanger in Al-Si WB6 alloy 3-star sanitary comfort: the maximum according to EN13203-1/2 thanks to the integrated 48 liter tank Connectivity via EasyControl CT 200 or via MB LAN2 module (accessory) which can be combined with CR…, CW…(1) thermoregulators Energy saving thanks to the integrated climatic regulation (with external probe accessory) and the possibility of connection to solar thermal systems Installability in any context thanks to the C6 approval which allows the use of systems of any intake/exhaust system External installation, in a partially protected place, in compliance with current legislation Maximum peace of mind thanks to the Service5 program, with an additional 3-year warranty to the 2 required by law, by signing an annual scheduled maintenance contract with one of the Junkers Bosch Technical Assistance Services Characteristics: Primary exchanger in Al-Si WB6 alloy Integrated 2-litre sanitary expansion vessel Boiler with kettle Integrated climatic regulation The boiler offers high energy savings, thanks to the integrated climatic regulation (with external probe accessory) and the possibility of connection to solar thermal systems 3-star comfort The presence of the integrated 48-litre tank in the boiler has allowed it to be awarded the "3-star sanitary comfort" score in terms of efficiency in the production of domestic hot water according to European Standards Suitable in any context The boiler can be installed in any context thanks to the C6 approval which allows the use of any intake/exhaust system Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO RESIDENCE CONDENS 28 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical features Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input:+ 25 kW Sanitary nominal heat input: 28 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.7% Profit return 30% (47th return): 107.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 16.1 l/min Dimensions (hxlxp) mm 845 x 400 x 358 ; 39 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG. General characteristics RESIDENCE CONDENS Yield **** Low polluting emissions. Aluminum condenser, with premix burner. Heating only models and combined models. Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW.   Modulation ratio 1:8 which allows the boiler to respond to all heat requests. Self-modulating circulator, low consumption (IEE≤0.20). "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only). Standard thermoregulation on the card in combination with the external probe (optional). Assembly template, hydraulic fittings, power supply cable supplied. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RINNAI CONDENSING BOILER AMAMI 29 PLUS METHANE COMPLETE WITH FUME KIT: Premixed gas combined condensing boilers. Technical specifications Model: Love me 29 PLUS Code: A245Cÿ Heating nominal heat input: 22.5 kW DHW nominal heat input: 28.9 kW Energy efficiency marking 92/42 EEC:ÿ **** Efficiency at full loadÿ(80ø/60ø):ÿ98% Return profit to partial loadÿ30%: 109.9% Sealed chamber, forced draft Nominal power modulation:ÿ(Tm/Tr=80/60øC) Heating kWÿ4.4 -22.1 Nominal power modulation:ÿ(Tm/Tr=36/30øC) Heating kW 4.9 - 24 Pollution class marking:ÿNox EN 483 5 G20 gas consumption at 1,013 mbar and 15øC:ÿ(Sanitary) mü/h 2.38 (3.06) Maximum absorbed electrical power: 75 Wÿ Electric power absorbed at partial load: 28 W Heating/sanitary water content: 3.3/0.7 l Expansion tank content: 8 lt DHW delivery (T=38øC): 10.5 l/min DHW delivery (T=25øC): 16.1 l/min Maximum working temperature: 85øC Dimensions (hxlxp) mm 650 x 500 x 395 ; 37Kg Electrical Protection Degrees:ÿIPX4D Power supply: METHANE Features list CONDENSATION the environmentally friendly and energy saving technology.ÿCondensing boilers are clean and efficient: even the water vapor contained in the combustion products is used to generate heat. By making the most of the condensate, the energy to produce the desired heat is less, with the advantage of saving energy. In fact, condensing boilers reduce consumption by a final 30% and polluting emissions (NOx and CO2) by a final 70%, respecting the 'traditional' ones. LOVE ME and LOVE ME PLUS Love me Oshima a Japanese tropical island: the new collection of condensing boilersÿRinnai is inspired by her. Love me because I'm perfect. It heats your home and, while doing so, it respects the environment with the lowest polluting emissions. And let us save money, ensuring a constant return for my entire life. Love me because I am at the forefront of technology, designed to be truly capable of improving your daily comfort. Love me because I will be able to surprise you, with all the domestic hot water you need. Instant type condensing gas heat generator for heating and domestic hot water production, complete with electronic display with regulation and self-diagnosis function, which can be combined with a digital remote control. LOVE ME: A stainless steel heartÿThe heartÿ of allÿRinnai boilers, the heat exchanger, in stainless steel. This, in combination with the inverted flame ceramic burner, guarantees the highest efficiency of all the boilers on the market (109.9% according to EN 677). All Rinnai Amami shima appliances have advanced electronics and the ability to modulate from very low powers such as to guarantee a constant operating curve, avoiding overheating and cooling of the premises. The production of DHW, in all models, is abundant and immediate, to safeguard comfort and save energy. The structure of Rinnai boilers is sound-absorbing, designed to minimize the sound impact on the house: measured in decibels, the noise produced by the boiler is the same as you can hear in a library. Energy classification: 4 STARS /4 ACS Rating: 3 STARS /3 Furthermore, the 2 AMAMI PLUS models are also equipped with a chronothermostat and external climatic probe as standard. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

IN CASE OF NON-AVAILABILITY OF THE PRODUCT, THE NEW MODEL baxi evolution prime 30 WILL BE SUPPLIED Technical specifications ErP energy efficiency class (heating and DHW): A - A Load profile: XL heating and instant DHW production Heating/sanitary nominal heat inputkW 28.9/24.7 Sanitary nominal thermal powerÿkW 28ÿ Energy efficiency(92/42/CEE)ÿ**** Efficiency 100% Pn (80-60øC): 97.8% Efficiency 100% Pn (50-30øC): 105.0% Minimum operating temperatureøC -5 Expansion/pre-charge capacity l/bar 8/0.5 Sanitary water temperature adjustmentøC 35-60 Sanitary water production T 25øC l/min 16.1 Minimum domestic hot water flow rate I/min 2ÿ Degrees of protection: IPX5Dÿ NOx class (EN 483) 5 Electric power W 155 Dimensions (hxwxd): 700x395x279ÿmmÿ; 44 kgs Power supply: METHANE LPG Main features First ÿThe ideal condensation for replacement in old systemsÿ with cast iron / lamellar steel radiators The new Prime condensing range is divided into two models, 24 and 28 kW for heating and instant domestic hot water production. Prime was designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling directive (2010/30/EU) requires the labeling of products according to a decreasing energy scale that goes from A++ to G starting from 09/26/2015 and from A+++ to D from 09/26/2019. The label was created to allow the final consumer, by providing real and comparable data, to make informed choices by targeting high-efficiency products. Characteristics: Easy to use thanks to the control panel with knobs and backlit LCD displayÿ Easy installation thanks to the ultra-compact dimensions (700x395x285mm - including knobs) and weight-free (26 kg)ÿ Campdi modulation 1:5 greater efficiency and silence High efficiency circulation pumpÿ Arrangement for combination with the Baxiÿ integrated solar system Double 80 exhausts as standardÿ Connection of 50 mm rigid flexible exhaust pipes: solutions for flue refurbishmentÿ Connect pressurized collective fluesÿ Boilers working with methane that can be transformed into LPG and propane by means of a specific regulation (conversion kit not necessary) The advantages of the new Prime Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce the installation time. The new Prime has the same distance between centers of the hydraulic connections of the conventional BAXI boilers to be replaced. The frontal access to the electrical connection also speeds up connection times. The fixing bracket supplied as standard and the visible hooks facilitate wall mounting Clapet (non-return valve) Included in the downstream duct of the gas group fan ÿConnection of pressurized collective flues Thanks to the integrated non-return valve (clapet), Prime is designed for connection to pressurized collective flues. ÿFlexible smoke ducts 50 mm Possibility of rehabilitating the flue pipes with a 50 mm discharge hose (up to 40m of discharge). Less energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. The new regulation 7129-3:2015 prescribes the possibility of creating collective flues in positive pressure only for type C condensing appliances. It is possible to connect to a collective flue in positive pressure only appliances declared suitable by the manufacturer for this application and equipped with non-return device (clapet), designed to prevent the combustion products from flowing through devices connected and temporarily switched off; the smoke non-return valve is an integral part of the appliance Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue and separable flue supplied as standard The 60/100 axial exhaust is available as an accessory and can be combined with a 90ø diameter 60/100 curved tube extension (adjustable by 360ø). To facilitate replacement in installations where spaces are limited (flue gas outlet at the rear of the boiler), the new accessory is available with a lowered coaxial bend 90ø. The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact by fitting into all replacement installation contexts. To facilitate replacement in installations where space is limited (flue gas outlets at the rear of the boiler), the new 90ø coaxial lowered bend accessory is available New combustion group The new Prime combines the performance of the stainless steel exchanger with the advantages of a new generation burner integrated with an innovative cold closing door. The new cylinder burner ensures greater thermal-acoustic comfort, and reduced NOx and CO emissions thanks to the greater flame stability. The new cold door reduces losses by 75% with a surface temperature below 20°C, guaranteeing significant savings in stand-by and during operation, speeding up maintenance, as there is no need to wait for it to cool down. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

JUNKERS CERAPUR COMPACT ZWB 24-1 DE CONDENSING BOILER COMPLETE WITH KIT FOR CNG OR LPG FUMES EXHAUST - NEW ErP Heat and DHW energy efficiency class (ErP) A For heating and domestic hot water production Forced draft sealed chamber Declared load profile XL Nominal heat output: 24 kW Nominal heat input: 24.7 kW Useful thermal efficiency at nominal power 40/30 °C: 103% Useful thermal efficiency at 30% nominal load 40/30 °C: 109% Continuous sanitary production: 12 l/min Sanitary temperature range that can be set : 40/60°C NOx class: 5 Degree of protection: IP X4D Dimensions (Depth x Width x Height): 365 x 400 × 815 mm; 39kg Version: CNG  CERAPUR COMPACT CERAPURCOMPACT combines maximum efficiency and high comfort in terms of heating and domestic hot water production with an excellent price/performance ratio. Condensation has never been so convenient! Advantages Novelty! ZWB 24-1 DE, ZWB 28-1 DE Wall-mounted condensing boilers, with DHW production, which can be combined with DHW solar thermal systems. B23, B33, C13, C33, C43, C53, C63, C83, C93 type certifications obtained. Suitable for use with Ø 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. Bosch Heatronic to BUS system with LCD display. High range of continuous power modulation (DHW and heating 1:8). Electronic conversion from natural gas to LPG (and vice versa). Patented active and passive solar optimization algorithm SolarInside-ControlUnit. Modulating fan and premix burner. Three-speed circulator (models ZWB ..-1 D) or in Energy Class A (models ZWB ..-1 DE, ZSB ..-1 DE). Patented high efficiency silicon-aluminum alloy primary heat exchanger. Sanitary plate heat exchanger increased to condense also in DHW (ZWB). Heating side expansion vessel of 8 litres. Installation plate or dedicated fittings for hydraulic connections (accessories). Heating side filling cock. Possible remote management via MB LAN or Netcom 100 modules (accessories) which can be combined with FR 120, CR 100 or FW..., CW ... thermoregulators External installation, in a partially protected place, in compliance with current legislation. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Box to be purchased separately RIELLO RESIDENCE IN CONDENS 25 KIS LPG CONDENSING BOILER WITH FUME KIT + BUILT-IN UNIT - NEW ErP Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 25 kW Useful thermal power (sanitary): 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 105% Profit return 30% (47th return): 110% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 268 ; 42kg Built-in dimensions (hxlxp) mm 1223 x 654 x 286 ; 24kg Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG RESIDENCE IN CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor recessed installations Residence In Condens allows for the technological level and high performance of the Residence Condens indoor version to be concealed in the wall. The innovative Riello heat exchanger, completely made of seamless aluminum, is synonymous with efficiency and durability, resistant to system dirt, offers excellent head and high heat exchange. Thermoregulation is managed directly by the boiler board and via the external probe (accessory) it allows suitably adapting the temperature of the heating system to the external climatic conditions. Residence In Condens is available with powers from 25 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Antifreeze function that protects the heating and DHW circuits down to -5°C (external and built-in versions) with the possibility of extending the protection down to -15°C (optional) The remote control panel (optional) allows you to manage the boiler directly from inside the home Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO evoDENS E 25S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG LPG FUMES EXHAUST - NEW ErP Technical specifications Model:ÿevoDENS Product codeÿLPG: 103021010300 Product codeÿLPG: 103121017300 Characteristics of heating/sanitary exercises: Heating/DHW nominal heat inputÿ20.0 / 25.0 Minimum heating/DHW heat inputÿ6.0 Yield name 60ø/80øC % 97.4 Yield min. 60ø/80øC % 97.4 Efficiency 30% at 30°C: 101.5 Energy efficiencynøÿ Minimum / maximum heating temperature**øC 25 / 85 Minimum / maximum heating pressurebar 0.3 / 3.0 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Minimum / maximum sanitary temperatureøC 35 / 55 Sanitary minimum / maximum pressurebarÿ0.3 / 10.0 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ15.9 / 11.4 Voltage / Power at nominal heat input V ~ÿ230 ~ / 98 Power at minimum thermal capacity W 9 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxD:ÿ700x400x290 mm; 31.5 kgs Boiler water content 2.0 l Main features evoDENS The new Savidi range of high efficiency wall mounted boilers dedicated to residential buildings. A complete range of powers, 24, 28 and 32 kW, for heating and the production of domestic hot water, inÿextremely compact dimensionsÿ (700 x 400 x 325 mm) makes Evodens a product suitable for different comfort needs.ÿEvodensÿe endowed with an aesthetic innovativeÿand a newÿimmediate and simpleÿto use interface. New functions make ÿEvodens an integral part of a system and facilitate its installation. Exchangers: Primary heat exchanger in copper, high circulation lamellar. Sanitary heat exchanger in stainless steel plates digital control panel:ÿInnovative digital control panel with graphical interface and buttons Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features Model : Ciao Green 25 CSI LPG code: 20095437 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Seasonal heating efficiency % 93 Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 20/25 kW Nominal heating thermal power: 19.50 kW Classification European Directive EEC 92/42: **** Efficiency at rated power: 97.5% Efficiency at reduced load (30%): 102.2% Max electric power heating Watt 69 Electrical protection degree IP X5D Expansion vessel capacity 8 litres Quantity of hot water with Δt=25°C: 14 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 715x405x248 ; 28kg LPG power supply  Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionization control). Exclusive services: Beretta offers 5 years of peace of mind thanks to the Kasko warranty extension formulas. HELLO GREEN ErP Ciao Green: high energy efficiency, low gas consumption and low emissions. The entry into force of the European ErP Directive (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Mandatory labeling provides greater transparency on the characteristics of products that can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2) by 20%, increasing by 20% the use of renewable energies and reduce energy consumption by 20% in EU countries. Condensing exchanger The innovative Beretta compact aluminum condensing exchanger is assembled with a brazing production process in a controlled atmosphere. In addition to allowing a more uniform distribution of heat, aluminum offers a high resistance to corrosion for the benefit of a longer duration over time. Aluminum is also chosen for its lightness, excellent conductivity, mechanical resistance, reliability and recyclability. The condensing exchanger makes it possible to recover a large part of the heat from the fumes by reducing losses in the chimney, and a large part of the latent heat, reaching a four-star energy efficiency value (according to European Directive EEC 92/42). The premix burner optimizes the combustion mixture by reducing NOx emissions to values ​​that place the boiler in Class 5, the highest according to the European Directive EN 677. Universal installation Ciao Green is designed to be installed outdoors in partially protected places or recessed thanks to the dedicated accessories and board anti-freeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit together with the siphon antifreeze heater kit. If the boiler is installed outside, without embedding, the lower cover is required for greater protection. The management The electronic panel is the brain of boiler management. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. A liquid crystal display and LEDs provide information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Characteristics: ErP boilers with synchronous modulating pump with low energy consumption (EEI≤0.20) Designed according to the ecodesign indications provided for by the European ErP Directive Energy Class > heating (class A) > DHW profile XL (class A) Seasonal heating efficiency 93% Aluminum condensing exchanger, two versions of 25 kW and 29 kW combined and one 25 kW heating only Designed following the ecodesign indications of the European ErP Directive Class 5 according to the UNI EN 483 European Standard It can also be installed externally and recessed through the adoption of special kits (optional) Display for viewing temperature and diagnostic codes IPX5D electrical protection degree Prepared for connection to the remote control (optional) Standard thermoregulation (optional external probe) Plumbing fittings, gas and sanitary taps (optional) Antifreeze kit available up to -10°C (optional) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE IMMERGAS AREA ASSISTANCE IN ADVANCE IMMERGAS VICTRIX MAIOR 35 TT PLUS CONDENSING GAS BOILER FOR LPG HEATING ONLY WITH FUME EXHAUST KIT Technical features Product code: 3.024881 Typology: Heating only Class A heating energy efficiency Heating/DHW nominal heat input kW 34.9 Heating/DHW maximum nominal useful power kW 34.2 Useful thermal efficiency at 100% Pn (80/60 °C) 97.9% Useful thermal efficiency at 30% of the nominal load. (40/30°C) 108.5% Supply voltage/frequency: 230/50 Volt/Hz Expansion vessel 10 liters (real 7.1) Electrical insulation degree IP X5D Modulation range: 10 - 100% Boiler dimensions (HxLxP) mm 748 x 440 x 276 Empty boiler weight 35.8 kg Gas version available: LPG Product pluses: Wide modulation range Electronic ignition with ionization control Ideal for multiple withdrawals of domestic hot water (combined with a boiler) High hydraulic performance It integrates with solar systems VICTRIX MAIOR 35 TT PLUS Wall-mounted condensing boiler, for heating only with sealed chamber. Maximum comfort according to European standards. Combined with a boiler, it is ideal for simultaneous use of boiler water Particularly ideal for homes with multiple services or for all situations that require large withdrawals quickly, it guarantees a considerable production of domestic hot water. Boiler and Storage Unit can also be installed in different environments, thus increasing installation flexibility. It is characterized by the innovative primary exchanger which guarantees high flow rates and heads on the heating circuit, even when replacing old systems, with low risk of clogging , and by the presence of an "advanced" electronic card with electronic gas change ( without nozzle replacement) and self-adapting combustion control system. The new electronic card modulates the heating power of the boiler up to 12% and together with the low consumption circulator increases energy savings. The instantaneous models are equipped with a flow regulator and DHW inlet probe to obtain high DHW comfort: 3 stars *** according to the EN 13203 -1 standard. Also noteworthy is the wide range of modulation (from 10 to 100%) with high yields even in the presence of low energy absorption. The boiler also features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display. Thanks to the condensing technology, it has a high efficiency and guarantees particularly low polluting emissions (NOX class 5). VICTRIX MAIOR TT PLUS is designed for outdoor operation in places partially protected from atmospheric agents (rain and snow) and is equipped with a standard antifreeze system which protects it down to a temperature of -5 °C (with optional kit up to - 15°C); moreover, it can be built -in inside the SOLAR CONTAINER or inside the home in the specific DOMUS CONTAINER technical cabinet: this allows for solutions such as GAUDIUM SOLAR PLUS V2 (only with “BASE” hydronic groups) COMFORT High hydraulic performance: the innovative condensing module guarantees high flow rate, low risk of clogging due to impurities in the system water, greater resistance to corrosion thanks to the special alloy. Boiler: prearranged as standard for combination with a boiler with a capacity of 80 to 2000 litres, it guarantees a high production of hot water. Thermoregulators: optional. They improve comfort and increase energy savings. DOMINUS app: optional. <strong">Simple and intuitive, it allows you to check the functioning and temperature of the boiler, switch it on and off from anywhere via smartphone or tablet. Via the optional Wi-Fi transmitter kit (code 3.026273), to be interposed to a wireless modem/router, it is possible to communicate from anywhere with the boiler circuit board. ENVIRONMENTAL COMPATIBILITY Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Renewable energy: using a boiler with a capacity of 120 liters or more, the boiler can be connected to solar thermal systems for a greater production of hot water. Combination with thermal solar systems The Storage Tank Units with a capacity of 120 liters or higher are designed for combination with forced circulation thermal solar systems, including the UB INOX SOLAR 200 ErP version equipped with integrated solar circuit. VICTRIX MAIOR 35 TT PLUS can be connected to the entire range of Immergas Solar Solutions INSTALLATION High flexibility: approved to operate indoors and outdoors in partially protected places. IPX5D electrical protection. Standard antifreeze down to -5 °C. It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/EC) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for instruments that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less

Riello condensing boiler Family Condens 25 KIS complete with methane or LPG fume exhaust kit class A - NEW Energy class in heating A Energy class in sanitary A XL load profile Heating Nominal heat input kW 20.0 Nominal thermal power (80°-60°) kW 19.5 Expansion vessel L 10 Sanitary Nominal heat input kW 25 Nominal thermal power** kW 26.3 Maximum pressure bar 8 Hot water production with T+25 °C l/min 15.1 NOx class 6 Dimensions Dimensions (H***xLxP) mm 822x470x275; 35 kgs Methane or LPG power supply: the boiler is self-adapting without the need for conversion kits Riello presents the New Family New stainless steel heat exchanger Riello has always designed its products with care and dedication. Continuous improvement leads today to the evolution of the Family condensing range, starting from its primary element: the exchanger. The new Family exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. Access remains from the front, to facilitate maintenance operations. Riello has also optimized the DHW exchanger by adopting the most advanced fluid-thermodynamic analysis and simulation techniques to obtain the best performance and maximum comfort for the user in terms of waiting times and temperature stability during sampling, compared to a boiler traditional MAXIMUM POSSIBLE LOAD PROFILE IN RELATION TO THE TYPE AND POWER OF THE GENERATOR, UP TO XXL IN THE CASE OF 35 KW FAMILY. SANITARY ENERGY EFFICIENCY CLASS A, THE MAXIMUM VALUE CURRENTLY PROVIDED BY EU REGULATION 811/2013 FOR COMBINED GENERATORS (TRADITIONAL B OILER CLASS B). REDUCTION OF GAS CONSUMPTION COMPARED WITH A TRA ADTIONAL BOILER BY APPROXIMATELY 10%, ACCORDING TO EN13203-2. ALMOST NULL WAITING TIME FOR HOT WATER (< 1 SECOND) WITH DOMESTIC HOT WATER PRE-HEATING FUNCTION ACTIVE (TRADITIONAL BOILER ABOUT 40 SECONDS). Emissions always under control The new Family is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionization electrode. Thanks to the ACC, the Family is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Family also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the air/gas mixture to always keep it within the optimal parameters. The ACC system also simplifies installation. In the ignition phase, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. Control panel and functions Even clearer, more intuitive and easier to use, it integrates elegantly into the aesthetics of the machine. The large backlit display, the raised keys and the interface enriched with explanatory texts and icons help the user and the installer in navigation. Through the panel it is possible to view the operating status, carry out the programming and access the regulation of the boiler and system. The Family display is equipped with the new "Color Bar" which informs the user at a glance on the operating status of the boiler. In the event of anomalies, it is possible to immediately understand if a problem is critical and whether to request the intervention of technical assistance. GREEN Regular operation. The system is satisfying domestic hot water/heating requests or carrying out other automatic operations. A scrolling text at the bottom describes the function active at that moment. RED Presence of blocking anomalies that require an intervention by the Technical Assistance. An error triangle on the display gives access to the details of the anomaly. YELLOW Presence of anomalies that can potentially be solved by the user which allow even partial operation of the product. An error triangle on the display gives access to the details of the anomaly. GRAY The system is ready to serve any requests. No operation in progress and anomaly detected. RiCloud - Comfort at your fingertips The RiCLOUD intelligent remote control allows you to manage the comfort of your home in a simple and intuitive way, even when you are away from home. Through the dedicated app it is in fact possible to check the status of the heating system, but also to program the boiler's switching on and off, temperature and operating times directly from your smartphone or tablet. It is possible to manage up to 8 different zones, each controlled by its own RiCLOUD. RiCLOUD can also be installed in total wireless mode using a radio frequency receiver, available as an accessory, thus avoiding any electrical or masonry intervention. Many needs, one solution INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment . OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the standard antifreeze function down to -0 °C , without additional heaters. BUILT- IN Inside a built-in box or wall unit, thanks to its compact dimensions (25 kW model). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less