MURAL Riello START 25 Kis LOW NOx condensing boiler complete with methane fume exhaust kit 20187404 Seasonal space heating efficiency class A Water heating energy efficiency class- A Rated power P rated kW 19 Seasonal space heating energy efficiency % 93 HEATING Nominal heat input: kW 20.00 Nominal thermal power (80÷60 °C) kW 19.38 Nominal thermal power (50÷30 °C) kW 20.92 Reduced heat input: kW 3.10 Reduced thermal power (80÷60 °C) kW 2.94 Reduced thermal power (50÷30 °C) kW 3.04 SANITARY Nominal heat input kW 25.00 Nominal thermal power kW 25.00 Reduced heat input kW 3.10 Reduced thermal power (*) kW 3.10 YIELDS Useful efficiency Pn max-Pn min (80°-60°) % 96.9 - 94.7 Useful efficiency Pn max-Pn min (50°-30°) % 104.6 - 98.0 Useful efficiency 30 % (return 30°C) % 109.1 Efficiency at average P Range Rated (80°-60°) % - 97.0 Performance at average P Range Rated 30% (30th return) % - 109.3 Combustion efficiency % 97.2 Chimney losses with burner on (Pn max) % 2.8 Chimney losses with burner off % 0.09 Shell losses with burner on (Pn max) % 0.3 FUMES EXHAUST Nox class - UNI EN 15502: 6 Residual head concentric pipes 0.85 m ø 60-100 mm Pa : 60 Residual head separate pipes 0.5 m ø 80 mm Pa : 180 Boiler residual head without pipes and without flange Pa 186 ELECTRICAL CHARACTERISTICS Electric power (Pel max heating - Pel max san.) W 62 - 95 Circulator electric power (1000 l/h) W 42 Supply voltage V - Hz 230-50 IP X5D degree of protection HEATING EXERCISE Maximum pressure bar 3 Minimum pressure for standard operation 0.25 bar Maximum temperature 90 °C Pump: max head available to the system mbar 408 at a flow rate of 1000 l/h Membrane expansion tank l 8 Expansion tank preload bar 1 HEALTHCARE EXERCISE - INSTANT VERSION Maximum pressure bar - 8 Minimum pressure bar - 0.5 Quantity of hot water at ?t 25°C l/min - 14.3 with ?t 30°C l/min - 11.9 with ?t 35°C l/min - 10.2 Minimum domestic water flow rate l/min - 2 Sanitary H2O temperature selection field. °C - 37/60 Flow regulator l/min – 10 New Start START is the new proposal, completely renewed from a technological and functional point of view, of Riello condensing boilers for small and medium-sized domestic users. START is available in 3 sizes 15, 25, 30 kW, in combined (KIS) and heating only (IS) versions. One of the distinctive features of the new START is the innovative digital control panel with touch keys designed with particular attention to ease of use. High efficiency sanitary exchanger developed by Riello Modern and intuitive touchscreen HMI, with representative icons and capacitive keys with acoustic "buzzer" sound Modern and linear design with under-boiler connection cover available as an accessory for excellent aesthetic integration Specific DHW electronic functions: DHW delay, anti-short cycle function and smart fan Hydraulic unit with DIN standard sequence Low consumption circulator (IEE?0.20) 7 m with high head available as an accessory Ease of installation, integration even in confined spaces and replacement thanks to the wide choice of accessories available as optionals Modulation ratio 1:8 Easy maintenance and cleaning of the combustion chamber thanks to the front access to the exchanger – Seasonal efficiency 93% 8-litre side expansion tank Standard flue gas flange with dedicated flue system Standard thermoregulation in combination with the external probe, available as an accessory Possibility of recessed installation (model 25 KIS and 30 KIS) and outdoors in partially protected places (IPX5D) Assembly crosspiece already integrated in the boiler and power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air using accessories. This modification is the responsibility of the installer or the technical assistance service. IPX5D electrical protection degree. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta CIAO X 25 C low NOx 6 condensing boiler complete with METHANE fume exhaust kit - NEW ErP cod. 20197875 Optional Wi-Fi Technical features Code: 20197875 Energy label specifications according to the European ErP directive Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Heating thermal capacity (max-min) 20.0 - 3.1 kw Nominal DHW heat input (max-min) 25.0 - 3.1 kw Supply voltage V-Hz 230 - 50 IP degree of protection IPX5D NOx class 6 CNG power supply HEATING Max pressure-temperature bar-°C 3-90 Membrane expansion vessel l 8 SANITARY Max pressure bar 8 DHW production at ?T= 25 °C / 30 °C / 35 °C l/min 14.3/11.9/10.2 Minimum DHW flow l/min 2 DIMENSIONS, WEIGHT Boiler dimensions (HxWxD) mm 700x400x275 HELLO X, the comfort you deserve CIAO, ONE OF THE BEST-SELLING WALL-MOUNTED BOILERS EVER IN THE BERETTA PORTFOLIO, HAS BEEN COMPLETELY REDESIGNED, CREATING A NEW CONDENSING RANGE WITH MANY INNOVATIVE FEATURES AND ADVANTAGES: CIAO X The new Beretta range retains the distinctive characteristics of the previous models of the same name in terms of reliability and ease of use, adding many other important and innovative features: from the new primary heat exchanger in stainless steel , to the innovative touchpad interface up to the DIN standard hydraulic connections. With CIAO X, Beretta enhances the search for comfort and innovation with respect for the environment, which represents one of the strengths of the brand, starting from its origins. This renewed energy awareness translates into high efficiency, low consumption and a high modulation ratio (1:8), which combined with installation flexibility, compact dimensions and low weight, allow CIAO X to be placed at the top of its category. But there's more. HELLO X looks forward to future generations. The new range can already process a mixture of hydrogen up to 20%, the source of sustainable energy that will be the real ecological turning point in the coming years THE RANGE Ciao X is available in a complete range of 5 models, to meet the various needs of heating: CIAO X 25 C (combined, with dedicated codes for methane and LPG) CIAO X 30 C (combined) CIAO X 15 R (heating only) CIAO X 25 R (heating only) The compact dimensions and low weight of CIAO X allow it to be installed practically anywhere in the home, even in a wall unit in the kitchen. The product can also be installed outside the home (recessed in a BOX or in a partially protected place). CHECK YOUR COMFORT WITH A TOUCH One of the distinctive features of the new CIAO X is the digital touchpad interface, which combines design and innovation with ease of use. With a simple touch on 7 points of the panel, you can intuitively access all the settings and the boiler and system parameters. Each touch activates a buzzer, which generates acoustic feedback to confirm the operation. The LCD display communicates with the user and the installer through icons, without using texts, in order to allow an immediate understanding of the displayed function. EVERYWHERE HELLO X The soft and essential lines of the innovative touch control give CIAO X a modern and pleasant character, which facilitates integration into any context. The compact dimensions and low weight allow the boiler to be easily installed practically everywhere, not only inside the home, but also outside (recessed in a box or in a partially protected place). CIAO X is therefore ideal for replacing old boilers, both with DIN and Beretta connection sequences, thanks to the availability of accessory kits that simplify conversion. A wide range of accessories completes the CIAO X offer: flue kits, compact water filters (softener and magnetic) and cover of the hydraulic connections, facilitating their installation and harmonizing their integration, both indoors and outdoors. NEW STAINLESS STEEL CONDENSING EXCHANGER CIAO X is equipped with a new primary exchanger in stainless steel , with a smooth tube with a large section, to ensure excellent efficiency and cleanliness over time. Stainless steel, in addition to the high resistance to the corrosive action of acid condensate, prevents the internal formation of oxides and other electrochemical phenomena typical in installation on old systems. The single wrapped coil geometry (hydraulic circuit in series) ensures constant flow in all sections of the exchanger and intrinsically prevents clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber NEW FUNCTIONS FOR GREATER COMFORT IN SANITARY In the combined models, the high-performance plate exchanger, connected to the primary hot water circuit, allows domestic hot water to be heated instantaneously, without the need for an external boiler. The new sanitary exchanger has been optimized by Beretta to obtain high performance and maximum comfort for the end user in terms of temperature stability and reduced waiting times. These pluses, which place CIAO X at the top of the reference category, ultimately translate into water and energy saving, for greater respect for the environment. Here are some of the special functions of CIAO X: The PREHEATING function and its evolution in PREHEATING SMART have been designed to further reduce water and gas consumption. In fact, these functions make it possible to keep the water warm inside the new high-efficiency plate exchanger, produced in our factories, while reducing waiting times. The TOUCH & GO function allows you to activate instant pre-heating, only for a specific request. Other special functions such as DOMESTIC DELAY, ANTI-OSCILLATION, SMART FAN allow to improve the performance of the boiler in particularly difficult operating conditions, such as for example in the case of very low or very high inlet water temperature, or a very shallow water HI, COMFORT YOUR COMFORT AT YOUR FINGERTIPS CIAO X* IS COMPATIBLE WITH HI, COMFORT, THE NEW IOT SOLUTION PLATFORM BY BERETTA, WHICH ALLOWS TO MANAGE COMFORT IN A SIMPLE AND INTUITIVE WAY The end user can manage the home climate with the traditional HI, COMFORT T100 thermostat control, via the new HI, COMFORT App, which can be connected to the thermostat via the Wi-Fi box. The new App can be downloaded free of charge for Android and iOS systems and allows you to monitor the status, remotely set the domestic hot water temperature and define the boiler settings in a simple and safe. Furthermore, installing HI, COMFORT T100 is quick and easy and, in case of replacement of an old thermostat, does not require interventions on the electrical system of the house. HI, COMFORT T100, battery powered, also allows "wireless" installation, if the system is equipped with a radio frequency receiver SMART KEY K100 The new CIAO X range was created ready for the K100 Smart Key, an accessory designed for the latest generation Beretta condensing boilers, which marks their evolution towards increasingly eco-sustainable comfort. The Smart Key K100, through the App proprietary HI, COMFORT, allows you to know the operating status of the boiler, change its parameters and much more, all remotely. The various functions of the Smart Key K100 are certainly of interest to the user: from the "Bottle Function", to protect children and non-self-sufficient users from the risk of burns, to the "Booster Function", to maximize speed heating the environment, up to the "Wellness Function", to maintain a constant hot water temperature for maximum comfort and much more, all to be discovered. And for users who are increasingly attentive to the environment, it is possible, through the HI, COMFORT App, to monitor and manage the use of energy in their heating system, saving up to 15%* of consumption and avoiding unnecessary waste. For a sustainable future CIAO X is born ready to work with mixtures of natural gas and hydrogen - up to a maximum of 20% - a first important step towards achieving the objectives of environmental sustainability and the path of decarbonization initiated by the European Union. Availability in huge quantities Producibility using low-impact methods and in a sustainable way from renewable sources, such as wind energy, photovoltaics and biomass Reduction of polluting emissions in the percentage relative to its use Real opportunity for change to start the decarbonization process, fight global climate change, improve air and life quality Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia a Condensazione Riello Residence HM 25 KIS Low NOx Con Kit Scarico Fumi Metano o Gpl Caratteristiche tecniche Modello : Residence HM KIS Potenza nominale ERP: 20 kW Alimentazione : Metano/gpl Efficienza energetica Classe di efficienza energetica stagionale del riscaldamento : A Classe di efficienza energetica del sanitario : A Efficienza energetica stagionale del riscaldamento : 93% Potenza termica utile Potenza termica nominale e a regime di alta temperatura : 19,5 kW Potenza termica nominale e a regime di bassa temperatura : 6,5 kW Efficienza Utile Alla potenza termica nominale e a regime di alta temperatura ** ƞ4 % 87,9 Al 30% potenza termica nominale e a regime di bassa temperatura *** ƞ1 % 98,0. Altre specifiche tecniche Portata termica riscaldamento (max-min) kW 20,0- 2,5 Portata termica ACS nominale (max-min) kW 25,0-2,5 Tensione di alimentazione V-Hz 230-50 Grado di protezione IP IPX5D Classe NOx 6  Riscaldamento Pressione-temperatura massima bar-°C 3-90  Pompa: massima prevalenza disponibile(alla portata di 1000 l/h) **** mbar 400 Capacità vaso espansione a menbrana l 9 Dimensioni, peso Dimensioni caldaia (HxPxL) mm 740x275x420  Peso netto kg 29 Residence HM RESIDENCE HM INAUGURA UNA NUOVA GENERAZIONE DI CALDAIE A CONDENSAZIONE, CHE SANCISCE L’IMPEGNO DI RIELLO PER UN’INNOVAZIONE TECNOLOGICA AL SERVIZIO DEL RISPARMIO ENERGETICO E DELLA SOSTENIBILITÀ, OFFRENDO UN COMFORT SEMPRE PIÙ RISPONDENTE ALLE MODERNE ESIGENZE DELL’UTENTE RESIDENCE, tra le gamme più rappresentative dell’offerta Riello in termini di affidabilità e performance, si rinnova profondamente nel design e nella tecnologia per dar vita a RESIDENCE HM. Tante sono le novità di questa nuova caldaia murale a condensazione rispetto alla serie precedente: dall’elevata modulazione 1:10 su tutta la gamma, al nuovo scambiatore di calore in acciaio inox con rinnovato controllo di combustione adattivo, fino al nuovo pannello di controllo touch, per citare le principali.Denominatore comune di tutta la gamma la ricerca tecnologica finalizzata al risparmio energetico per offrire un comfort sempre più elevato: dalla silenziosità alle prestazioni, tante sono le caratteristiche migliorative di RESIDENCE HM, che l’utente non mancherà di apprezzare. La nuova gamma si presenta in una veste estetica completamente rinnovata, dal carattere moderno ed evoluto, che si armonizza con facilità nei diversi contesti residenziali, sia nella sostituzione che nella nuova edilizia. Inoltre come tutte le caldaie Riello di nuova generazione, RESIDENCE HM è orientata al futuro: è infatti predisposta per operare con miscele di gas naturale e idrogeno fino al 20%, contribuendo così a ridurre l’impatto ambientale e le emissioni delle caldaie a condensazione nei prossimi anni. ALTE PRESTAZIONIGrazie all’ampia modulazione 1:10, al nuovo controllo intelligente di combustione ACC e ai rinnovati scambiatori primario e sanitario OTTIMO COMFORT SANITARIOAcqua calda senza oscillazioni ditemperatura, per un comfort ottimale durante i prelievi, con profilo di carico al vertice della categoria.INTERFACCIA TOUCHL’interfaccia di RESIDENCE HM mantiene la semplicità e l’intuitività di utilizzo, innovandosi con una caratterizzante estetica touch. ELEVATA SILENZIOSITÀ RESIDENCE HM si distingue per la silenziosità operativa, che la rende la soluzione ideale per installazione all’interno dell’abitazione. DESIGN COMPATTOLa compattezza, trasversale su tutte le taglie, rende RESIDENCE HM idonea anche per installazione in un pensile. La caldaia è installabile anche a incasso o all’esterno, in luogo parzialmente protetto INSTALLAZIONE E MANUTENZIONE SEMPLIFICATEGrazie al sistema di controllo combustione adattivo ACC, alla compattezza e all’accessibilità frontale ai componenti. TECNOLOGIA AL SERVIZIO DEL COMFORT E DELL’EFFICIENZA ENERGETICA Nuova flangia fumi con collare di sicurezza a rapido serraggio.  Ridotte emissioni di NOx: CLASSE 6 (EN 15502). Ampia modulazione 1:10 su tutta la gamma, per un elevato risparmio energetico. Efficienza stagionale 93%. Nuovo scambiatore in acciaio inox con rinnovato sistema di controllo della combustione ACC Combustion. Vaso di espansione laterale da 9 litri. Scambiatore a piastre ad elevate prestazioni sviluppato da Riello. Nuovo circolatore digitale modulante a basso consumo. Nuovo gruppo idraulico con sequenza di attacchi di tipo DIN, per una sostituzione semplificata. Copertura superiore e mensola inferiore realizzate con nuovi materiali costampati per favorire longevità e resistenza. NUOVO CONTROLLO DI COMBUSTIONE ELETTRONICO ADATTIVORESIDENCE HM è dotata di un nuovo sistema intelligente dicontrollo della combustione ACC (active combustion control), in grado di adattarsi automaticamente al combustibile (metano, GPL, ecc.) senza ricorrere a codici specifici o a kit di trasformazione accessori. Questo innovativo e sofisticato sistema di controllo consente l’auto-regolazione della combustione, eliminando la necessità di taratura iniziale. Il sistema ACC è inoltre in grado di adattare la caldaia ad operare con diverse configurazioni di gas, differenti lunghezze dei tubi e a diverse altitudini (entro i limiti progettuali previsti). Il sistema ACC è in grado inoltre di effettuare autodiagnosi per una combustione sempre sotto controllo, con emissioni costantemente ben inferiori ai limiti imposti dalla normativa. SCAMBIATORE SANITARIO A PIASTRE AD ELEVATE PRESTAZIONILo scambiatore sanitario di RESIDENCE HM “high performance”, sviluppato da Riello, offre un ottimo comfort, unitamente a rapidità di raggiungimento del set point e di stabilità della temperatura durante il prelievo. SILENZIOSITÀ DI FUNZIONAMENTOGrazie anche ai nuovi materiali introdotti, RESIDENCE HM sidistingue per la silenziosità di funzionamento, caratteristica migliorativa (circa il -10%) rispetto alla precedente gamma omonima e particolarmente apprezzabile nel caso di installazione della caldaia all’interno dell’abitazione. Il range di rumorisità si attesta infatti su livelli dai 45 db(A), per il modello 30 KIS, fino a 48 db(A) per il modello 20 IS. FACILITÀ DI INSTALLAZIONE E MANUTENZIONEIl sistema ACC semplifica l’installazione. In fase di accensione la nuova caldaia non necessita di taratura ed è sufficiente selezionare la tipologia di gas combustibile utilizzato dalla caldaia tramite l’interfaccia, se diverso da quello di default (metano). Le dimensioni ridotte e il peso contenuto rendono il prodotto facilmente trasportabile e movimentabile in fase di installazione. L’accessibilità frontale ai componenti rende inoltre il prodotto più semplice da manutenere per il tecnico preposto, velocizzandone i tempi di intervento. INTEGRABILITÀ IN SISTEMI IBRIDIRESIDENCE HM è in grado di integrarsi nei sistemi ibridi Riello multi-energia (gas/ elettricità e rinnovabili), attraverso l’offerta di accessori della piattaforma Hi, Comfort. NUOVA INTERFACCIA DAL DESIGN EVOLUTO E MODERNO RESIDENCE HM è dotata di una nuova interfaccia digitale dal design accattivante, che conferisce a RESIDENCE HM un carattere moderno, in lineacon i canoni estetici attuali. Progettato con una particolare attenzione alla facilità di utilizzo, il pannello di RESIDENCE HM permette di accedere in modo intuitivo a tutte le regolazioni e ai parametri della caldaia e del sistema con un semplice “touch” su sette punti della sua superficie. A conferma dell’operazione avvenuta si genera un “buzzer”, il caratteristico segnale acustico. Anche il display HMI da 2,8’’ è stato concepito all’insegna della semplicità di comunicazione per l’utente, attraverso l’utilizzo di icone che rendono più immediata la comprensione rispetto ai testi. LO SGUARDO AL FUTURO La gamma RESIDENCE HM, come tutte le caldaie Riello di nuova generazione, nasce predisposta per funzionare con miscele di gas naturale e idrogeno - fino a un massimo del 20% - un primo importante contributo verso il processo di decarbonizzazione avviato dall’Unione Europea ROADMAP IDROGENO 100%E c’è di più. Riello punta ora all’utilizzo dell’idrogeno puro come fonte di energia completamente priva di CO2 . Per questo, la nuova gamma RESIDENCE HM è stata testata per operare con la combustione dell’idrogeno al 100% tramite un kit di conversione, al momento in via sviluppo nei nostri laboratori. L’IDROGENO COSTITUISCE IL SISTEMA ENERGETICO SOSTENIBILE DEL FUTURO Disponibilità in enormi quantità Producibilità mediante metodi a basso impatto e in modo sostenibile da fonti rinnovabili, quali l’energia eolica, fotovoltaica e le biomasse Riduzione delle emissioni inquinanti Opportunità di contribuire al processo di decarbonizzazione UNA CALDAIA PER MOLTEPLICI SOLUZIONI LA DISPONIBILITÀ DI UN’AMPIA OFFERTA DI KIT ACCESSORI DEDICATI MOLTIPLICA LE SOLUZIONI IN TERMINI DI APPLICAZIONI INSTALLATIVE DI RESIDENCE HM, UNA CALDAIA VERSATILE, NATA PER RISPONDERE ALLE DIVERSE ESIGENZE IMPIANTISTICHE E DI COMFORT Compattezza, peso ridotto e grado di protezione elettrica IPX5D permettono a RESIDENCE HM di essere installata con facilità non solo all’interno dell’abitazione, ma anche all’esterno (in luogo parzialmente protetto) e a incasso in box. Il prodotto è ideale anche per la sostituzione, favorita dalla disponibilità di kit accessori di conversione, nel caso la caldaia da sostituire non sia Fornita di attacchi DIN Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

MURAL Riello START 30 Kis LOW NOx condensing boiler cod. 20187407 complete with methane fume exhaust kit Seasonal space heating efficiency class A Water heating energy efficiency class- A Rated power P rated kW 19 Seasonal space heating energy efficiency % 93 HEATING Nominal heat input: kW 20.00 Nominal thermal power (80÷60 °C) kW 24.38 Nominal thermal power (50÷30 °C) kW 26.78 Reduced heat input: kW 3.95 Reduced thermal power (80÷60 °C) kW 3.79 Reduced thermal power (50÷30 °C) kW 4.09 SANITARY Nominal heat input kW 30.00 Nominal thermal power kW 30.00 Reduced heat input kW 3.95 Reduced thermal power (*) kW 3.95 YIELDS Useful efficiency Pn max-Pn min (80°-60°) % 97.5 - 96.0 Useful efficiency Pn max-Pn min (50°-30°) % 107.1 - 103.6 Useful efficiency 30% (return 30°C) % 108.8 Efficiency at average P Range Rated (80°-60°) % - 97.3 Performance at average P Range Rated 30% (30th return) % - 109.0 Combustion efficiency % 97.7 Chimney losses with burner on (Pn max) % 2.3 Losses in the chimney with the burner off % 0.08 Shell losses with burner on (Pn max) % 0.2 FUMES EXHAUST Nox class - UNI EN 15502: 6 Residual head concentric pipes 0.85 m ø 60-100 mm Pa : 60 Residual head separate pipes 0.5 m ø 80 mm Pa : 190 Boiler residual head without pipes and without flange Pa 196 ELECTRICAL CHARACTERISTICS Electric power (Pel max heating - Pel max san.) W 85 - 102 Circulator electric power (1000 l/h) W 42 Supply voltage V - Hz 230-50 IP X5D degree of protection HEATING EXERCISE Maximum pressure bar 3 Minimum pressure for standard operation 0.25 bar Maximum temperature 90 °C Pump: max head available to the system mbar 408 at a flow rate of 1000 l/h Membrane expansion tank l 8 Expansion tank preload bar 1 HEALTHCARE EXERCISE - INSTANT VERSION Maximum pressure bar - 8 Minimum pressure bar - 0.5 Quantity of hot water at ?t 25°C l/min - 17.2 with ?deltat 30°C l/min 14.3 with deltat 35°C l/min - 12.3 Minimum domestic water flow rate l/min - 2 Sanitary H2O temperature selection field. °C - 37/60 Flow regulator l/min – 12 New Start START is the new proposal, completely renewed from a technological and functional point of view, of Riello condensing boilers for small and medium-sized domestic users. START is available in 3 sizes 15, 25, 30 kW, in combined (KIS) and heating only (IS) versions. One of the distinctive features of the new START is the innovative digital control panel with touch keys designed with particular attention to ease of use. High efficiency sanitary exchanger developed by Riello Modern and intuitive touchscreen HMI, with representative icons and capacitive keys with acoustic "buzzer" sound Modern and linear design with under-boiler connection cover available as an accessory for excellent aesthetic integration Specific DHW electronic functions: DHW delay, anti-short cycle function and smart fan Hydraulic unit with DIN standard sequence Low consumption circulator (IEE?0.20) 7 m with high head available as an accessory Ease of installation, integration even in confined spaces and replacement thanks to the wide choice of accessories available as optionals Modulation ratio 1:8 Easy maintenance and cleaning of the combustion chamber thanks to the front access to the exchanger – Seasonal efficiency 93% 8-litre side expansion tank Standard flue gas flange with dedicated flue system Standard thermoregulation in combination with the external probe, available as an accessory Possibility of recessed installation (model 25 KIS and 30 KIS) and outdoors in partially protected places (IPX5D) Assembly crosspiece already integrated in the boiler and power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air using accessories. This modification is the responsibility of the installer or the technical assistance service. IPX5D electrical protection degree. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta CIAO AT 25 C LOW NOx condensing boiler Complete with Fume Kit 20176935 - NEW Technical specifications according to ErP directives Class B heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile - XL Technical features: Nominal heat input kW 25.00 NOx Class 6.00 Total electrical power Watt 102.00 IP electrical protection degree IPX5D Expansion vessel capacity 8 litres Maximum pressure bar 8 Quantity of hot water with Δt=25°C litres/min 14.3 Dimensions Boiler size (HxLxP) mm 715x405x250 CIAO AT with stainless steel heat exchanger BERETTA PRESENTS THE NEW CIAO AT, THE SPECIFIC CONDENSING BOILER FOR REPLACING TRADITIONAL HIGH TEMPERATURE SYSTEMS The new CIAO AT range is proposed in two combined models of 25 kW of power, with methane and LPG respectively. Both models are equipped with DIN standard hydraulic connections, to allow easy replacement of boilers with hydraulic standards other than Beretta. Many new features compared to the previous range. First of all, the new post-exchanger in stainless steel and composite material, which allows it to pre-heat the return water from the primary circuit using the residual heat of the exhaust fumes. The cooled burner, the new electronics and interface, the reduced depth of the boiler which allows installation even in contained recesses, complete the innovative profile of this product, which is preparing to become the reference in the specific segment of the replacement of radiator systems . The simple and linear design, in line with the Beretta style, the compactness of the dimensions and the installation flexibility make CIAO AT easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or recessed, also through dedicated accessories. The Technical Characteristics New layout with compact dimensions and low weight (only 31 kg!) to facilitate transport and built-in installation Traditional copper primary exchanger New and robust finned pack post-exchanger in stainless steel with taste and composite material Sanitary plate heat exchanger with possibility of pre-heating Innovative gas-air combustion supervision system Forced draft sealed chamber boiler with cooled low NOx burner Standard automatic by-pass Modulation range 1:3 Low consumption circulator (EEI ≤ 0.20), 6 m, with anti-blocking Standard analogue hydrometer Low NOx emissions : CLASS 6 (EN 15502-1) Innovative gas valve regulation procedure Sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Maximum installation flexibility: Indoor, outdoor and recessed installation (in a partially protected place) Antifreeze heater kit, hydraulic connections and external probe available as accessories New flue flange with click fit connection: Fast and safe, without the need for an external collar IPX5D electrical protection degree Boiler support template supplied Compatible with BeSmart command Thermostat Dedicated LPG code: for conversion, contact authorized Beretta assistance centres LOW NOX BURNER CIAO AT is able to satisfy the most demanding requirements in terms of low emissions, in order to make heating appliances less polluting. Thanks to the innovative burner of CIAO AT, of the hyperstoichiometric type, a very low flame temperature is obtained as an effect. This characteristic, combined with the cooling of the burner through the heating circuit water, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors ( EU Regulation 814/2013). NEW INTERFACE The new CIAO AT digital interface, designed with particular attention to ease of use, is equipped with a modern backlit display that allows immediate and complete reading of the information on the operating status of the machine, both for the user and for the installer or maintenance technician. Through six intuitively functional keys it is possible to easily adjust both the temperature in heating and DHW, and access the configuration of the machine parameters, rather than resetting the alarm states. UNIVERSAL INSTALLATION Ciao AT is designed to also be installed outdoors in partially protected places or contained recesses (e.g. Edilbox Beretta), thanks to the board's anti-freeze protection down to 0°C. In colder temperatures it is possible to extend the protection down to -10°C using the special antifreeze heater kit. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli condensing boiler Bluehelix HiTech RRT 28 C complete with low NOx methane or LPG fume exhaust kit - New Heating ERP class A Healthcare ERP Class A XL load profile Heating capacity max / min kW 24.5 / 3.5 Max DHW heat input (Hi) kW 28.5 Max / min DHW thermal power kW 28.0 / 3.4 Yield 30% % 109.7 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 8 litres Sanitary flow rate ?t 25°C l/min 16.1 Protection degree (IEC 60529) IP X4D Dimensions HxWxD mm 700x420x320 Bluehelix HiTech RRT The new user interface with «capsense» technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply. Thanks to the energy efficiency of the space heating ηs 94% among the highest in the category (Class A ErP, scale from G to A++) and to the combination with the Connect remote control, able to read the outside temperature directly from the internet, reaches the system energy class A+ (scale from G to A+++). Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Thanks to the "Hydrogen plug-in" system, one of its most important innovations, it is already able to self-regulate to work with mixtures of natural gas and hydrogen, which will soon arrive in Europe, to combat global warming. Designed to fully satisfy the requests for a "robust" product from every point of view thanks to the high-passage primary exchanger capable of guaranteeing maximum efficiency and reliability over time also, and not only, as a replacement for old generators in particularly dirty systems . Silence at the top The particularly careful design of BLUEHELIX HITECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. It will be difficult to realize whether the boiler is on or off from its noise, as on older generations of boilers, because even the on/off transients have been optimized according to acoustic comfort. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections Characteristics Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Class 6 NOx: already in line with the provisions of the ErP regulation from 26.09.2018 (NOx emissions < 56mg/kWh) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Methane LPG Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door (without insulators): simplifies maintenance and reduces its cost thanks to fewer perishable parts Instantaneous production of DHW with dedicated DHW plate heat exchanger (only for version C) Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems ECO function in DHW for greater savings in the period of low use of hot water (only for version C) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only for methane operation) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Boiler control The new user interface with ''capsense'' technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply, customizing the operation of the appliance in so as to manage the environmental comfort according to one's needs. Thanks to the remote connection via bus, this can also be done directly from the CONNECT remote control, even via smartphone. The boiler is also set up to connect a second room thermostat to dedicated terminals to manage multi-zone systems. TOP EFFICIENCY Even on old systems (replacements) The BLUEHELIX HITECH RRT heat exchanger THERMOBALANCE™ (fig. A) compared to the more classic and widespread steel exchanger (fig. B) also used in the past by the Ferroli Group exclusively on a small series of boilers produced for the market English, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values MC2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can see the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston Condensing boiler for outdoor use GENUS ONE NET EXT 25 Methane complete with flue gas exhaust kit Product code: 3301225 Energy label specifications according to the European ErP directive Class A heating energy efficiency (A+ achieved thanks to thermoregulation) Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Max/min nominal heat input (heating) PCI: 22-2.5 kW Nominal heat input max/min (sanitary) PCI: 26-2.5 kW Max/min useful heat output (heating): 21.5-2.3 kW Efficiency at nominal heat input (60/80°C) PCI: 97.7% Efficiency at nominal heat input (30/50°C) PCI: 106.7% Efficiency at 30% (30°C) PCI: 109.7% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 60-36°C Quantity of hot water (deltaT 25°C): 15.4 l/min Quantity of hot water (deltaT 35°C): 11 l/min Specific flow rate (first 10' with deltaT 30°C): 12.8 l/min minimum operating temperature (-20°C with antifreeze kit) -15°C Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 84,7W Degree of protection of the electrical system IP X5D Dimensions mm (HxWxD) 770 x 505 x 240 External installation Power supply: methane Functionality: XtraTech™ stainless steel Standard connectivity: with the Sensys NET thermostat Thermoregulation included: Sensys NET system manager + external probe Functions: AUTO, Comfort, CARE Operation CNG, LPG and propane air without the need for kits. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu GENUS ONE NET EXT XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version Ignition system, electronic combustion control Gas transformation from the technical menu Modulation ratio 1:10 Ariston Net connectivity included with Sensys Net BusBridgeNet® communication protocol AUTO and Comfort function Class A+ in heating thanks to the Sensys NET system manager and standard external probe Minimum operating temperature down to -20°C* Semi automatic filling Electro-galvanized coat for outdoors Smoke outlet 80, 60, 50 mm Comfort function It speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last tap). Auto function Maximum comfort, efficiency and energy savings based on automatic analysis of the environmental conditions, connected external devices and required performance. System management New communication protocol designed to ensure complete system management. High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Extra small size Extremely small footprint to adapt to any space problem. Made in Italy Made entirely in Italy. Modulating circulation Modulating circulator for optimizing consumption and maximizing performance. Outdoor installation Possibility of outdoor installation thanks to all the weather protection devices. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia Riello FAMILY 25 KIS a condensazione completa di kit scarico fumi Low NOx Metano - NOVITA' RISCALDAMENTO Portata termica nominale kW 20,00 Potenza termica nominale (80°/60°) kW 19,48 Potenza termica nominale (50°/30°) kW 21,24  SANITARIO Portata termica nominale kW 25,00 Potenza termica nominale (*) kW 26,25 Rendimento di combustione % 97,8 CATEGORIA II2H3P Tensione di alimentazione V-Hz 230-50 Grado di protezione IP X5D  ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Vaso d’espansione a membrana l 10 Dimensioni LxPxH mm 470x275x740 Classe energetica Riscaldamento/Sanitario A Family  La nuova gamma FAMILY nasce hybrid-ready, grazie all’intelligenza di sistema REC 10CH integrata nel pannello di controllo di serie. La caldaia è pertanto in grado di gestire in maniera integrata le sorgenti termiche a disposizione, senza necessità di controlli accessori. NON SERVE DECIDERE OGGICon FAMILY è possibile decidere di passare all’ibrido anche in un secondo momento, ampliando il sistema con pompe di calore, pannelli solari e bollitori/accumuli dell’offerta Riello, secondo le indicazioni a catalogo.ENERGY-SAVINGI sistemi ibridi consentono di ridurre i costi della generazione termica e le emissioni dannose in ambiente, grazie all’integrazione delle energie rinnovabili. FAMILY SI RINNOVA. IL TOP DI GAMMA DELL’OFFERTA MURALE RIELLO È IL RISULTATO DI UN NUOVO MODO DI PENSARE L’ENERGIA: EFFICIENTE, IBRIDA, GREEN. RISPETTOSA DELL’AMBIENTE PER IL MASSIMO RISPARMIO ENERGETICO, FAMILY È LA CALDAIA CHE STAVI CERCANDO, PER UN TOTALE COMFORT IN RISCALDAMENTO E IN SANITARIO. HYBRID READYFAMILY nasce hybrid ready, in grado cioè di gestire direttamente, senza necessità di accessori aggiuntivi, i componenti di un sistema multi-energia, in modo efficiente ed efficace.SCAMBIATORE IN ACCIAO INOXScambiatore primario in acciaio inox, con geometria a spira unica avvolta. Massima efficienza e affidabilità.ALTA EFFICIENZAMassimo comfort e minimi consumi, in riscaldamento ed in sanitarioSTABILITÀ DELL’ACQUA CALDA SANITARIANuovo scambiatore sanitario a piastre ottimizzato, per performance al top della categoria in termini di efficienza, stabilità della temperatura e tempi di attesa.INSTALLAZIONE SEMPLICE E VELOCECon FAMILY l’installazione e l’accesso ai componenti sono semplificati per ridurre al minimo tempo e faticaBASSE EMISSIONIFAMILY è certificata Classe 6 di NOx, la migliore prevista dagli standard europei. FAMILY è caratterizzata dal sistema di controllo di combustione elettronico evoluto, che monitora costantemente la combustione per ottenere consumi ed emissioni sempre ottimizzate.PANNELLO DI CONTROLLO CON NUOVA FUNZIONE IBRIDAGrazie all’intelligenza di sistema REC 10CH, integrata nell’elettronica della nuova FAMILY, la caldaia è in grado di gestire un sistema multi-energia, in modo semplice per l’utente e senza necessità di controlli accessori.  Garanzia Prodotto :  Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Technical features Heating ERP class A Healthcare ERP Class A Load profile XXL Heating capacity max / min kW 30.6 / 3.5 Max DHW heat input (Hi) kW 34.7 Max / min DHW thermal power kW 34.0 / 3.4 Efficiency 30% % 109.5 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 10 litres Sanitary flow rate ?t 25°C l/min 19.5 Protection degree (IEC 60529) IP X4D Dimensions HxWxD mm 700x420x320 Bluehelix HiTech RRT   The new user interface with «capsense» technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply. Thanks to the energy efficiency of the space heating ηs 94% among the highest in the category (Class A ErP, scale from G to A++) and to the combination with the Connect remote control, able to read the external temperature directly from the internet, reaches the system energy class A+ (scale from G to A+++). Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Thanks to the "Hydrogen plug-in" system, one of its most important innovations, it is already able to self-regulate to work with mixtures of natural gas and hydrogen, which will soon arrive in Europe, to combat global warming. Designed to fully satisfy the requests for a "robust" product from every point of view thanks to the high-passage primary exchanger capable of guaranteeing maximum efficiency and reliability over time also, and not only, as a replacement for old generators in particularly dirty systems . Silence at the top The particularly careful design of BLUEHELIX HITECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. It will be difficult to realize whether the boiler is on or off from its noise, as on older generations of boilers, because even the on/off transients have been optimized according to acoustic comfort. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections Characteristics Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Class 6 NOx: already in line with the provisions of the ErP regulation from 26.09.2018 (NOx emissions < 56mg/kWh) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Methane LPG Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door (without insulators): simplifies maintenance and reduces its cost thanks to fewer perishable parts Instantaneous production of DHW with dedicated DHW plate heat exchanger (only for version C) Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems ECO function in DHW for greater savings in the period of low use of hot water (only for version C) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only for methane operation) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Boiler control The new user interface with ''capsense'' technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply, customizing the operation of the appliance in so as to manage the environmental comfort according to one's needs. Thanks to the remote connection via bus, this can also be done directly from the CONNECT remote control, even via smartphone. The boiler is also set up to connect a second room thermostat to dedicated terminals to manage multi-zone systems. TOP EFFICIENCY Even on old systems (replacements) The BLUEHELIX HITECH RRT heat exchanger THERMOBALANCE™ (fig. A) compared to the more classic and widespread steel exchanger (fig. B) also used in the past by the Ferroli Group exclusively on a small series of boilers produced for the market English, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values MC2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger group. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caratteristiche tecniche Modello : Residence IN 25 KIS Codice prodotto : 20189650 Potenza nominale : 19,0 kW Alimentazione : Metano/gpl Efficienza energetica Classe di efficienza energetica stagionale del riscaldamento : A Classe di efficienza energetica del sanitario : A Efficienza energetica stagionale del riscaldamento : 93% Consumo energetico annuo : 42 GJ Potenza termica utile Potenza termica nominale e a regime di alta temperatura : 19,4 kW Potenza termica nominale e a regime di bassa temperatura : 6,5 kW Efficienza utile Alla potenza termica nominale e a regime di alta temperatura : 87,3 % Al 30% potenza termica nominale e a regime di bassa temperatura : 98,5 % Consumi elettrici ausiliari A pieno carico : 32,0 W A carico parziale : 12,0 W In modalità Stand-by : 3,0 W Performance in riscaldamento Portata termica : 3,95 ~ 25 kW Pressione massima : 3 bar Temperatura massima : 90° C Performance in sanitario Portata ACS minima : 2 l/min Pressione massima : 8 bar Produzione ACS : 10,2 ~ 11,9 ~ 14,3 kW Dati installativi Diametro tubo entrata / uscita riscaldamento : 3/4" Diametro tubo entrata / uscita sanitario : 1/2" Dimensioni e peso Dimensioni (AxLxP) : 740x420x249 mm Peso : 31,0 Kg Caldaia murale a condensazione Riello RESIDENCE IN La soluzione efficiente, dove lo spazio fa la differenza Residence In è la soluzione Riello pensata per le esigenze installative in cui lo spazio fa la differenza e per un comfort senza compromessi. Residence In si distingue per compattezza, flessibilità applicativa e ampia disponibilità di accessori che garantiscono la compatibilità e retrocompatibilità anche nei box Riello più piccoli.  Lo scambiatore primario, interamente realizzato in acciaio inox e con accessibilità frontale alla camera di combustione, e lo scambiatore a piastre ottimizzato assicurano la massima efficienza e affidabilità nel tempo e garantiscono un comfort elevato, sia in riscaldamento che in sanitario Con RESIDENCE IN, Riello continua il percorso di rinnovamento della propria offerta murale in chiave eco-compatibile. L’ampio range di modulazione 1 : 8, le bassissime emissioni di NOx, che posizionano la gamma in Classe 6 (la migliore secondo gli standard europei), e la predisposizione per il funzionamento con miscele di gas naturale e idrogeno – fino a un massimo del 20% - sono solo alcune tra le caratteristiche che qualificano RESIDENCE IN come la caldaia ideale per un’installazione di valore nel tempo, dal minimo impatto ambientale ed estetico. Installazione universale Massima flessibilità installativa sia all’interno, all’esterno (in luogo parzialmente protetto) e a incasso in box Stabilità di acqua calda sanitaria Acqua calda senza oscillazioni di temperatura, per un comfort ottimale durante i prelievi Interfaccia digitale  Interfaccia dal design moderno, che si distingue per l’intuitività di utilizzo, comunicando con l’utente per mezzo di icone e testi scorrevoli. Basse emissioni La migliore in termini di rispetto ambientale a livello europeo Compattezza e flessibilità per un'installabilità universale RESIDENCE IN è la soluzione ideale per la sostituzione, oltre che per la nuova edilizia. Le dimensioni ridotte del prodotto, unitamente alla disponibilità di una gamma articolata di kit accessori per ogni tipo di applicazione, facilitano e velocizzano l’installazione, anche in piccoli box pre-esistenti. RESIDENCE IN, come suggerisce il nome, è la nuova caldaia Riello pensata in primis per l’installazione a incasso in box. Grazie alle ridotte dimensioni e alla disponibilità di una gamma dedicata di kit accessori, RESIDENCE IN è compatibile e retrocompatibile con le varie tipologie di box Riello. La nuova soluzione Riello, in caso di sostituzione di un modello a incasso, assicura all’utente un notevole risparmio, evitandogli sia l’acquisto di un nuovo box, che eventuali spese murarie per adeguare lo spazio della nicchia. Inoltre, gli attacchi idraulici con sequenza Riello rendono la sostituzione con le vecchie caldaie ancor più facile e immediata. L’installabilità a incasso è un plus anche per la nuova edilizia, permettendo di risparmiare spazio sempre più prezioso all’interno dell’abitazione e riducendo al minimo l’impatto estetico in facciata. Adatta per l'esterno RESIDENCE IN, grazie al grado di protezione IPX5D e al kit accessorio antigelo fino a -15°C, può essere installata anche all’esterno dell’abitazione, in luogo parzialmente protetto. Design moderno e utilizzo intuitivo RESIDENCE IN è dotata di un pannello di controllo dalle linee razionali e moderne, che si distingue per la semplicità di utilizzo. Attraverso il display LCD retroilluminato, che comunica con l’utente mediante icone e testi scorrevoli, è possibile accedere facilmente a tutte le funzioni di RESIDENCE IN. Un cuore d'acciaio per la massima efficienza RESIDENCE IN è dotata di un nuovo scambiatore primario in acciaio INOX, con tubo liscio ad elevata sezione, in grado di assicurare la migliore efficienza e pulizia nel tempo. L’acciaio INOX, oltre all’elevata resistenza all’azione corrosiva della condensa acida, previene la formazione interna di ossidi e di altri fenomeni elettrochimici tipici delle installazioni in vecchi impianti. La geometria a spira unica avvolta (circuito idraulico in serie) assicura una portata costante in tutte le sezioni dello scambiatore e previene intrinsecamente fenomeni di intasamento. L’accesso frontale agevola le operazioni periodiche di manutenzione e pulizia della camera di combustione. Comfort sanitario elevato Grazie al nuovo scambiatore a piastre high performance, RESIDENCE IN offre un elevato comfort in sanitario, con disponibilità di acqua calda in tempi brevi e un’ottima stabilità della temperatura di erogazione. Funzionamento silenzioso RESIDENCE IN, distinguendosi per la silenziosità operativa, rappresenta la scelta ottimale anche per l’installazione in locali non tecnici, ad esempio in caso di sostituzione in una cucina. Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

NB: THE BOILER IS BORN WITH METHANE, FOR THE TRANSFORMATION TO LPG, YOU MUST CONTACT THE AREA ASSISTANCE CENTER IN ADVANCE TO KNOW THE RELATED COSTS Chaffoteaux boiler INOA ULTRA 25 CF Open chamber low NOx cod. 3310639 - NEW ErP Technical Characteristics : Rated heat output max/min (Hi) Qn 25.8 / 11.0 kW Useful heating power max/min 23.2 / 9.8 kW Efficiency at nominal power 60/80 Hi 90.1% Efficiency at 30% of nominal power (47 Hi return) 89.9% Outlet temperature range min/max temp. 35-82°C Expansion tank capacity 8l Domestic hot water DHW comfort level (EN 13203) ** Max/min power in DHW mode 24.3 / 9.9 kW Specific flow rate in accordance with EN 625 at ΔT 30º C 11.8 l/min Hot water flow rate at ΔT 25º C 14.2 l/min Electrical data Supply voltage 230 V~ (50 Hz) Maximum absorbed power 52W Electrical protection degree IP X4D Dimensions HxWxD 745x400 x319 mm; 25 kgs INOA ULTRA 25 CF Inoa Ultra, equipped with multifunction LCD display. it contains in its simplicity all the technical characteristics necessary for optimal operation, guaranteeing reliable, practical and safe performance. Low NOx emissions: compliant with the Erp regulation of 09.26.2018 HEALTHCARE COMFORT Sanitary heat exchanger in stainless steel. Flow rate of 14.2 l/min with Δ=25°C. DHW circuit managed by two probes and a DHW flowmeter for better temperature stability based on the type of sampling. HEATING COMFORT High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Heating power of 25 kW. COMFORT OF USE AND INSTALLATION LCD display with display: history, self-diagnosis, operating temperature. Antifreeze function. Compact and perfectly adaptable to any type of home. Quick installation: predisposition for the use of the hydraulic bar (optional). Simplified maintenance: front access to all components. Prepared for integration with solar thermal systems. Prepared for on/off environmental regulation with and without wires. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Beretta MYNUTE X BOX 25 C Low NOx condensing boiler complete with flue gas kit 20189653 Methane for indoor and outdoor Wi-Fi optional - NEW Boiler code 20189653 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL NOx emission class 6 HEATING EXERCISE Max pressure-temperature bar-°C 3-90 Pump: maximum head available (at a flow rate of 1000 l/h) mbar 340 Expansion tank capacity l 8 HEALTHCARE EXERCISE Max pressure bar 8 DHW production at ?T= 25 °C / 30 °C / 35 °C l/min 14.3/11.9/10.2 Minimum DHW flow l/min 2 DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 35 kgs MYNUTE X YOUR SPACE, YOUR RELAXATION, YOUR COMFORT. WITHOUT COMPROMISES. Beretta presents Mynute X Box , the most compact condensing boiler in its offer and among the most compact on the market. With a depth of only 249 mm (25kw model), Mynute X Box it is ideal for replacement, specifically built-in, even in pre-existing, small-sized boxes. The range is distinguished by the application flexibility, as it can also be installed inside the home and externally (in a partially protected place) . In each type of application envisaged, MYNUTE X BOX ensures the user a uncompromising comfort , both in heating and in DHW, thanks to new primary heat exchanger in stainless steel and to the exchanger optimized plate sanitary ware , in continuity with the renewal process of the Beretta wall platform. The aesthetics, in line with the revisited Beretta style of the latest generation boilers, easily integrates into both indoor and outdoor environments. The wide modulation range 1 : 8 , le very low NOx emissions , which place the range in Class 6 (the best according to European standards), and the provision for operation with mixtures of natural gas and hydrogen - up to a maximum of 20% - confirm Beretta's renewed green awareness, which translates into the development of efficient, high-performance products with a low environmental impact. DIGITAL INTERFACE, MODERN AND INTUITIVE MYNUTE X BOX is equipped with an interface with soft lines, in line with the Beretta aesthetics of the latest generation models, which stands out for its ease of use . Through a modern backlit LCD display , which communicates with the user through icons and scrolling texts (multilingual), you can access all the functions of MYNUTE X BOX. THE 7 silk-screened operating keys they allow you to navigate the panel in a simple and intuitive way, accessing the settings and parameterizations of the boiler and the system. New smoke flange with quick-tightening safety collar Low emissions : class 6 (UNI EN 15502) Modulation 1 : 8 Expansion tank 9 l (30 kW models) Low consumption modulating circulator (EEI = 0.20), with a head curve of 6 metres Excellent silence of operation Degree of electrical protection IPX5D Hydraulic group with Beretta attacks sequence, ideal for replacement Dima in support Complete range of accessories for any type of application , in particular for recessed in boxes. THE specific accessory kit for recessing they are designed to be used in combination with the 'compact magnetic water filter' and 'compact polyphosphate dispenser kit' accessories. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less