ATTENTION The product is new and 100% functional, but has dents on the front side and the display frame has scratches (see photos) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available Ferroli DIVATECH D LN C 24 Low NOx Open Chamber Natural Gas Boiler - NEW ErP Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Performance Heating nominal heat output (Pn) Min / Max kW 7.0 / 23.5 Min / Max heat input kW 8.3 / 25.8 DHW useful thermal power kW 23.5 Efficiency (Pn) % 91.0 Maximum sanitary production Δt 30°C Δt 25°C l/min l/min 11.2 13.4 NOx class 6 DIVATECH D LN (LOW NOx) WALL-MOUNTED BOILERS WITH INSTANT DOMESTIC PRODUCTION WITH DOUBLE EXCHANGER. OPEN CHAMBER - NATURAL DRAFT - LOW NOx > STRONG POINTS: - Compact geometry primary heat exchanger entirely in copper - Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger - Standard by-pass - Open chamber and natural draft boiler, with low NOx emission atmospheric burner, in AISI 304 stainless steel - High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity - Can be combined with the modulating remote timer control - Casing painted white by anaphoresis with epoxy powders - Simple and complete control panel, display user interface, with setting keys - Compact dimensions and low weight > ADVANTAGES OF DIVATECH D LN: - Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card - ECO/COMFORT system for rapid production of domestic hot water - Adjustable post-circulation after the heating phase - Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems - Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

 ATTENTION Free methane/LPG/Propane air conversion during initial product verification and activation of the conventional guarantee, to be requested from the Authorised Assistance Centre Ferroli Bluehelix Theta 24C condensing boiler complete with flue gas exhaust kit Methane or LPG 0TPY2AWA Energy label specifications according to European ErP directive ERP class(Class G - A++) A / (Class G - A) A Max / min heating heat output kW 20.6 / 5, Max / min heating power (80/60°C) kW 20.0 / 4.9 Max / min heating power (50/30°C) kW 21.8 / 5.3 Max / min heat output sanitary (Hi) kW 25.0 / 5.0 Max / min thermal power for sanitary use kW 24.3 / 4.9 Efficiency Pmax / Pmin (80-60°C) (Hi) % 97.2 / 97.0 Efficiency Pmax / Pmin (50-30°C) (Hi) % 105.8 / 106.9 Yield 30% (Hi) % 108.8 Max / min operating pressure heating bar 3 / 0.8 Max / min sanitary operating pressure bar 9 / 0.3 Sanitary flow rate ∆t 25°C l/min 14 Sanitary flow rate ∆t 30°C l/min 11.7 Dimensions WxHxD mm 420x700x250; Empty weight kg 27 Bluehelix Theta WALL-MOUNTED CONDENSING BOILER INSTANTANEOUS SANITARY PRODUCTION > STRENGTHS: Boiler with single-circuit stainless steel primary exchanger without joints and/or welding, maintains high efficiency even on old systems. MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to changing gas network conditions (e.g. fluctuations or reduced pressures) MGR: Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits Instant production of domestic hot water with dedicated domestic hot water plate exchanger User interface with display and multifunction keys for adjusting and setting parameters By-pass as standard Hydraulic connections covered by the boiler casing Removable 3-part casing for quick and easy maintenance Refined design and compact size > BENEFITS OF THETA C: Solar system provision: provision for the production of domestic hot water combined with solar panel systems Sliding temperature operation via optional external probe Low consumption modulating heating circulator (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of operation block due to lack of flame detection (methane model) FPS: Smoke Protection System. Using the optional smoke accessory (041106X0 - exhaust gas clapet valve kit) that can be installed outside the boiler, it is possible to easily connect to collective pressurised smoke systems (e.g. in renovations), in accordance with the UNI 7129 regulation. NB: the kit cannot be used in built-in installations. Installation location: also for outdoor use in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze resistance kit Free methane/LPG/Propane air conversion upon initial product check and activation of the conventional warranty, to be requested from the Authorized Assistance Center Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

 ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance Ferroli condensing boiler Bluehelix Alpha 24C complete with methane or LPG fume exhaust kit cod. 0TPF2AWA Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max / min heat input (Hs) kW 22.9 / 4.7 Max DHW heat input (Hi) kW 25 Max working pressure heating bar 3 Min. heating operating pressure bar 0.8 Heating expansion vessel capacity 8 litres Max DHW working pressure bar 9 Minimum DHW operating pressure bar 0.3 Sanitary flow rate ∆t 25°C l/min 14 Protection degree (IEC 60529) IP IPX4D Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x250 Bluehelix Alpha .. More beautiful than "BEFORE" The new range of generators is equipped with the tested heat exchanger in stainless steel . Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX ALPHA is at the top of its category. TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) mod. 24 C COMBINED (14 l/min at ∆t 25°C) The BLUEHELIX ALPHA thermal group exchanger (fig. A) compared with the more classic and widespread steel exchanger. This geometry allows the exchanger to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig. B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values BLUEHELIX ALPHA FROM THE INSIDE EXCHANGER High flow single circuit stainless steel exchanger, resistant to clogging and easy to clean STEEL FRAME Made with high precision automated processes EXPANSION TANK 8 liter expansion tank placed on the side ELECTRIC PANEL FAN Offset fan, to facilitate maintenance of the primary exchanger without disassembly DOMESTIC HOT WATER EXCHANGER In stainless steel, with copper brazing CIRCULATOR High efficiency, for heating and exchange with the DHW circuit SEALED CHAMBER Removable steel panel to protect the combustion chamber with the function of a sealed chamber ELECTRICAL PANEL Large removable electrical panel to protect against any water damage that may occur during normal maintenance. Easy access to electrical connectors. THE ENGINE The tube that makes up the BLUEHELIX ALPHA exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and deposits. THE BOILER CONTROL The control box of BLUEHELIX ALPHA consists of an easy to use interface with backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. MC2 The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). MGR Methane, LPG, Propane Ready Air The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Thanks to the new electronics supplied, the gas change operation is extremely simple. The MC2 combustion control performs constant monitoring of the quality of the combustion and by simply modifying a parameter on the electronic card (operation to be carried out only by qualified personnel) it is possible to operate the boiler on Natural Gas or LPG or Propane Air. It is therefore not necessary to purchase additional accessory kits. CONNECT New wireless remote control available as an accessory for home comfort management also from a smartphone using the connect app (iOS and Android). Maximizes room comfort with delivery temperature modulation through the Room Climatic Compensation (CCA) and External Climatic Compensation (CCE) functions via the external temperature detectable directly from the internet (or from an optional external probe). It improves the average seasonal efficiency in space heating by +4%. EASY MAINTENANCE Problem-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the BLUEHELIX ALPHA thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - Easy access to the burner unit by removing 4 screws and the quick coupling (clip) of the fan. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front SUN EASY FUNCTION BLUEHELIX ALPHA has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. By means of a sensor located on the DHW circuit, it continuously controls the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. STOP AND GO FUNCTION With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these "false starts" can, in the long run, compromise the average life of the product. For this reason BLUEHELIX ALPHA provides an electronic parameter through which it is possible to delay burner ignition (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water. OUTDOOR INSTALLATION - ANTIFREEZE FUNCTION To make the most of the available space, the new BLUEHELIX ALPHA 24 - 28 C boiler can be installed recessed into the wall thanks to the special kit; for more critical installations, in completely uncovered places not protected from atmospheric agents, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. SANITARY ECO-COMFORT FUNCTION In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. The efficiency and the load profiles according to the ErP directive are at the top of the category: mod. 24 C / A - XL. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

The boiler is supplied with methane. Transformation of methane/LPG/Propaned air to be requested in advance from the Authorized Assistance Centre Technical features Model : Divatech D LNC 24 Power supply: LPG Energy efficiency Heating energy efficiency class: C Sanitary energy efficiency class: A ACS profile : XL Performance Heating nominal heat output : 7.3 ~ 22.8 kW Heat output : 8.3 ~ 25.0 kW Domestic useful thermal power: 22.8 kW Efficiency : 91.2% Maximum production of domestic hot water Δt 25°C : 13.8 l/min Maximum production of domestic hot water Δt 30°C : 10.9 l/min NOx : 6 Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 27.0 kg Ferroli boiler DIVATECH D LN LOW NOX Wall mounted boiler with instantaneous domestic hot water production with double exchanger , open chamber, natural draft Strengths - Compact geometry primary heat exchanger entirely in copper - Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger - Standard by-pass - Open chamber and natural draft boiler, with low NOx emission atmospheric burner , in AISI 304 stainless steel - High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity - Can be combined with the modulating remote timer control - Casing painted white by anaphoresis with epoxy powders - Simple and complete control panel, display user interface, with setting keys - Compact dimensions and low weight Advantages of Divatech D LN - Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card - ECO/COMFORT system for rapid production of domestic hot water - Adjustable post-circulation after the heating phase - Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems - Certified operation also with propane air by means of a specific transformation to be requested from the Authorized Assistance Centre - Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance IN THE ABSENCE OF THIS ITEM, THE BLUEHELIX ALPHA 24 MODEL WILL BE SHIPPED Technical features Model : Bluehelix Tech RRT 24C Energy rating Heating energy efficiency class: A DHW energy efficiency class: A ACS profile : XL Performance Heating thermal capacity: 5.0 ~ 20.4 kW Heating thermal power 80°C / 60°C : 4,9 ~ 20,0 kW Heating thermal power 50°C / 30°C : 4,9 ~ 20,0 kW DHW thermal capacity: 5 ~ 25.0 kW Sanitary thermal power: 4.9 ~ 24.5 kW Minimum efficiency 80°C / 60°C : 97.8% Maximum efficiency 80°C / 60°C : 98.0% Minimum efficiency 50°C / 30°C : 107.5% Maximum efficiency 50°C / 30°C : 106.1% G20 gas pressure : 20 bar G31 gas pressure : 37 bar NOx emission class : 6 Heating operating pressure: 0.8 ~ 3 bar Maximum heating temperature: 90°C Heating expansion vessel capacity: 8 litres DHW operating pressure: 0.3 ~ 9 bar Domestic water flow rate ∆t 25°C : 14 l/min Domestic water flow rate ∆t 30°C : 11.7 l/min Degree of protection : IP X5D Power supply (V,Hz, Ø) : 220~240/50/1 Dimensions and weight Dimensions (HxWxD): 700x420x250 mm Empty weight: 28.0 kg 5 years without worries Ferroli BLUEHELIX TECH RRT boiler Ecological wall-hung condensing boilers with Ferroli Thermobalance™ combustion cell The evolution continues.. The range of generators is equipped with the tested AISI 304 stainless steel exchanger. Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX TECH RRT is at the top of its category. BLUEHELIX TECH RRT achieves one of the highest energy efficiency of space heating in the boiler category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ Extended warranty with the "5 YEARS WORRY-FREE" formula The quality of Bluehelix TECH RRT is unquestionable, and Ferroli is ready to put it to the test by offering its customers extended warranty coverage which also ensures periodic maintenance and legal checks TOP efficiency even on old systems The exchanger of the THERMOBALANCE™ thermal group by Bluehelix TECH RRT compared with the more classic and widespread steel exchanger used in the past also by the Ferroli Group exclusively on a small series of boilers produced for the English market, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in Bluehelix models This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments, for example due to installation on old systems, the exchanger tends to blockage much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits is formed which hinder the heat exchange and reduce the efficiency below the nominal values . Product plus > Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt > It reaches one of the highest seasonal space heating efficiency in its category: ηs 94% and in combination with the modulating remote control and the optional external probe it reaches the top efficiency class > Class 6 NOx : already in line with the provisions of the ErP regulation, NOx emissions < 56mg/kWh. > MC 2 : M ulti C ombustion C ontrol, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network, such as fluctuations or reduced pressures. > MGR : Methane LPG R eady, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits > Exclusive exchanger-burner system with self-cooled door without insulators: it simplifies maintenance and reduces its cost thanks to a smaller number of perishable parts. > Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger > Hydraulic connections covered by the boiler shell > Large backlit multifunction graphic display for easy and correct parameter setting > Standard by-pass > Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes > FPS : Fumes Protection System . The flue clapet valve fitted as standard on the boiler allows easy connection to pressurized collective flue systems > Designed to simplify and facilitate normal maintenance and cleaning operations > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > ECO function in DHW for greater savings in the period of low use of hot water > 3-star certified comfort in sanitary manufacturing according to EN 13203 > Sliding temperature operation via optional external probe > Low consumption modulating heating circulator > Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection, only for methane operation > Place of installation : also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Innovative Ferroli THERMOBALANCE TM heating unit in its 5 elements Ferroli has oriented the design of the combustion cell and of the Bluehelix TECH RRT exchanger in order to maximize the functional advantages and the constructive sturdiness, as well as the simplicity of maintenance: the single-circuit design means that any air bubbles in the system do not remain trapped in the exchanger, and facilitates cleaning with chemical washing as much as possible, unlike spiral exchangers with double parallel circuit in which if only one of the circuits gets blocked, chemical washing is much more laborious. High flow single circuit stainless steel heat exchanger, resistant to clogging and easy to clean Self-cooled burner door without insulating panel Exclusive special stainless steel hemispherical burner with long-life gasket Intelligent “ Gas-adaptive ” system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary Offset fan, to facilitate maintenance of the thermal group without disassembly. Integrated smoke anti-reflux clapper for connection to CCS The engine Combustion cell The tube that makes up the BLUEHELIX TECH RRT exchanger is made of AISI 304 stainless steel , a material that allows for the creation of an extremely smooth surface , therefore less susceptible to encrusting agents and deposits. TOP quietness The new design for comfort The particularly careful design of BLUEHELIX TECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections. Remote control Environment and climate BLUEHELIX TECH RRT can be combined with a wide range of remote timer controls that allow remote control and control of the appliance. The ROMEO series is made up of several models, with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With the connection to the external probe, BLUEHELIX TECH RRT is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, guaranteeing the user greater comfort as the external climatic conditions vary. This function is internal to the electronic board of the boiler and therefore does not require the presence of the remote control , making the configuration operations easier in case of replacement. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Boiler control Control panel and functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs . The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems MC 2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC 2 : Multi Combustion Control , the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance" tm thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - Internal accessibility is favored by the 3-piece shell with removable side panels. - The electrical box of the electronic card can be easily extracted from the chassis and hooked laterally, leaving free access to the internal parts - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit - The burner door is totally self-cooled by air and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. - The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections . - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Simplified replacement Smoke outlet ø 50 mm The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters. FPS .: Fumes Protection System . The flue clapet valve allows easy connection to pressurized collective flue systems . For installers, the solution of the collective pressure pipe is cheaper Comfort & Safety The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life of the appliance Stop And Go function With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these " false starts " can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TECH RRT provides an electronic parameter through which it is possible to delay the ignition of the burner by activating it only in the face of actual withdrawals of domestic hot water Sun Easy function BLUEHELIX TECH RRT has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user Sanitary Eco-Comfort function In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable . Reaching maximum comfort certified 3 stars. The efficiency and load profiles according to the ErP directive are at the top of the category External installation and antifreeze function To make the most of the available space, the new BLUEHELIX TECH RRT 24C boiler can be installed recessed into the wall using the special kit. For more critical installations, in completely uncovered places not protected from the elements, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost . This function is active with the boiler powered by the gas circuit and under electrical voltage Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli condensing boiler Bluehelix HiTech RRT 28 C complete with low NOx methane or LPG fume exhaust kit - New Heating ERP class A Healthcare ERP Class A XL load profile Heating capacity max / min kW 24.5 / 3.5 Max DHW heat input (Hi) kW 28.5 Max / min DHW thermal power kW 28.0 / 3.4 Yield 30% % 109.7 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 8 litres Sanitary flow rate ?t 25°C l/min 16.1 Protection degree (IEC 60529) IP X4D Dimensions HxWxD mm 700x420x320 Bluehelix HiTech RRT The new user interface with «capsense» technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply. Thanks to the energy efficiency of the space heating ηs 94% among the highest in the category (Class A ErP, scale from G to A++) and to the combination with the Connect remote control, able to read the outside temperature directly from the internet, reaches the system energy class A+ (scale from G to A+++). Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Thanks to the "Hydrogen plug-in" system, one of its most important innovations, it is already able to self-regulate to work with mixtures of natural gas and hydrogen, which will soon arrive in Europe, to combat global warming. Designed to fully satisfy the requests for a "robust" product from every point of view thanks to the high-passage primary exchanger capable of guaranteeing maximum efficiency and reliability over time also, and not only, as a replacement for old generators in particularly dirty systems . Silence at the top The particularly careful design of BLUEHELIX HITECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. It will be difficult to realize whether the boiler is on or off from its noise, as on older generations of boilers, because even the on/off transients have been optimized according to acoustic comfort. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections Characteristics Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Class 6 NOx: already in line with the provisions of the ErP regulation from 26.09.2018 (NOx emissions < 56mg/kWh) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Methane LPG Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door (without insulators): simplifies maintenance and reduces its cost thanks to fewer perishable parts Instantaneous production of DHW with dedicated DHW plate heat exchanger (only for version C) Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems ECO function in DHW for greater savings in the period of low use of hot water (only for version C) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only for methane operation) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Boiler control The new user interface with ''capsense'' technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply, customizing the operation of the appliance in so as to manage the environmental comfort according to one's needs. Thanks to the remote connection via bus, this can also be done directly from the CONNECT remote control, even via smartphone. The boiler is also set up to connect a second room thermostat to dedicated terminals to manage multi-zone systems. TOP EFFICIENCY Even on old systems (replacements) The BLUEHELIX HITECH RRT heat exchanger THERMOBALANCE™ (fig. A) compared to the more classic and widespread steel exchanger (fig. B) also used in the past by the Ferroli Group exclusively on a small series of boilers produced for the market English, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values MC2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can see the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heating ERP class A Healthcare ERP Class A Load profile XXL Heating capacity max / min kW 30.6 / 3.5 Max DHW heat input (Hi) kW 34.7 Max / min DHW thermal power kW 34.0 / 3.4 Efficiency 30% % 109.5 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 10 litres Sanitary flow rate ?t 25°C l/min 19.5 Protection degree (IEC 60529) IP X4D Dimensions HxWxD mm 700x420x320 Bluehelix HiTech RRT   The new user interface with «capsense» technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply. Thanks to the energy efficiency of the space heating ηs 94% among the highest in the category (Class A ErP, scale from G to A++) and to the combination with the Connect remote control, able to read the external temperature directly from the internet, reaches the system energy class A+ (scale from G to A+++). Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Thanks to the "Hydrogen plug-in" system, one of its most important innovations, it is already able to self-regulate to work with mixtures of natural gas and hydrogen, which will soon arrive in Europe, to combat global warming. Designed to fully satisfy the requests for a "robust" product from every point of view thanks to the high-passage primary exchanger capable of guaranteeing maximum efficiency and reliability over time also, and not only, as a replacement for old generators in particularly dirty systems . Silence at the top The particularly careful design of BLUEHELIX HITECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. It will be difficult to realize whether the boiler is on or off from its noise, as on older generations of boilers, because even the on/off transients have been optimized according to acoustic comfort. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections Characteristics Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Class 6 NOx: already in line with the provisions of the ErP regulation from 26.09.2018 (NOx emissions < 56mg/kWh) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Methane LPG Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door (without insulators): simplifies maintenance and reduces its cost thanks to fewer perishable parts Instantaneous production of DHW with dedicated DHW plate heat exchanger (only for version C) Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems ECO function in DHW for greater savings in the period of low use of hot water (only for version C) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only for methane operation) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Boiler control The new user interface with ''capsense'' technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply, customizing the operation of the appliance in so as to manage the environmental comfort according to one's needs. Thanks to the remote connection via bus, this can also be done directly from the CONNECT remote control, even via smartphone. The boiler is also set up to connect a second room thermostat to dedicated terminals to manage multi-zone systems. TOP EFFICIENCY Even on old systems (replacements) The BLUEHELIX HITECH RRT heat exchanger THERMOBALANCE™ (fig. A) compared to the more classic and widespread steel exchanger (fig. B) also used in the past by the Ferroli Group exclusively on a small series of boilers produced for the market English, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values MC2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger group. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance IN THE ABSENCE OF THIS ITEM, THE BLUEHELIX ALPHA 24 MODEL WILL BE SHIPPED Technical features Model : Bluehelix Tech RRT 24C Energy rating Heating energy efficiency class: A DHW energy efficiency class: A ACS profile : XL Performance Heating thermal capacity: 5.0 ~ 20.4 kW Heating thermal power 80°C / 60°C : 4,9 ~ 20,0 kW Heating thermal power 50°C / 30°C : 4,9 ~ 20,0 kW DHW thermal capacity: 5 ~ 25.0 kW Sanitary thermal power: 4.9 ~ 24.5 kW Minimum efficiency 80°C / 60°C : 97.8% Maximum efficiency 80°C / 60°C : 98.0% Minimum efficiency 50°C / 30°C : 107.5% Maximum efficiency 50°C / 30°C : 106.1% G20 gas pressure : 20 bar G31 gas pressure : 37 bar NOx emission class : 6 Heating operating pressure: 0.8 ~ 3 bar Maximum heating temperature: 90°C Heating expansion vessel capacity: 8 litres DHW operating pressure: 0.3 ~ 9 bar Domestic water flow rate ∆t 25°C : 14 l/min Domestic water flow rate ∆t 30°C : 11.7 l/min Degree of protection : IP X5D Power supply (V,Hz, Ø) : 220~240/50/1 Dimensions and weight Dimensions (HxWxD): 700x420x250 mm Empty weight: 28.0 kg 5 years without worries Ferroli BLUEHELIX TECH RRT boiler Ecological wall-hung condensing boilers with Ferroli Thermobalance™ combustion cell The evolution continues.. The range of generators is equipped with the tested AISI 304 stainless steel exchanger. Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX TECH RRT is at the top of its category. BLUEHELIX TECH RRT achieves one of the highest energy efficiency of space heating in the boiler category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ Extended warranty with the "5 YEARS WORRY-FREE" formula The quality of Bluehelix TECH RRT is unquestionable, and Ferroli is ready to put it to the test by offering its customers extended warranty coverage which also ensures periodic maintenance and legal checks TOP efficiency even on old systems The exchanger of the THERMOBALANCE™ thermal group by Bluehelix TECH RRT compared with the more classic and widespread steel exchanger used in the past also by the Ferroli Group exclusively on a small series of boilers produced for the English market, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in Bluehelix models This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments, for example due to installation on old systems, the exchanger tends to blockage much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits is formed which hinder the heat exchange and reduce the efficiency below the nominal values . Product plus > Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt > It reaches one of the highest seasonal space heating efficiency in its category: ηs 94% and in combination with the modulating remote control and the optional external probe it reaches the top efficiency class > Class 6 NOx : already in line with the provisions of the ErP regulation, NOx emissions < 56mg/kWh. > MC 2 : M ulti C ombustion C ontrol, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network, such as fluctuations or reduced pressures. > MGR : Methane LPG R eady, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits > Exclusive exchanger-burner system with self-cooled door without insulators: it simplifies maintenance and reduces its cost thanks to a smaller number of perishable parts. > Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger > Hydraulic connections covered by the boiler shell > Large backlit multifunction graphic display for easy and correct parameter setting > Standard by-pass > Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes > FPS : Fumes Protection System . The flue clapet valve fitted as standard on the boiler allows easy connection to pressurized collective flue systems > Designed to simplify and facilitate normal maintenance and cleaning operations > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > ECO function in DHW for greater savings in the period of low use of hot water > 3-star certified comfort in sanitary manufacturing according to EN 13203 > Sliding temperature operation via optional external probe > Low consumption modulating heating circulator > Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection, only for methane operation > Place of installation : also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Innovative Ferroli THERMOBALANCE TM heating unit in its 5 elements Ferroli has oriented the design of the combustion cell and of the Bluehelix TECH RRT exchanger in order to maximize the functional advantages and the constructive sturdiness, as well as the simplicity of maintenance: the single-circuit design means that any air bubbles in the system do not remain trapped in the exchanger, and facilitates cleaning with chemical washing as much as possible, unlike spiral exchangers with double parallel circuit in which if only one of the circuits gets blocked, chemical washing is much more laborious. High flow single circuit stainless steel heat exchanger, resistant to clogging and easy to clean Self-cooled burner door without insulating panel Exclusive special stainless steel hemispherical burner with long-life gasket Intelligent “ Gas-adaptive ” system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary Offset fan, to facilitate maintenance of the thermal group without disassembly. Integrated smoke anti-reflux clapper for connection to CCS The engine Combustion cell The tube that makes up the BLUEHELIX TECH RRT exchanger is made of AISI 304 stainless steel , a material that allows for the creation of an extremely smooth surface , therefore less susceptible to encrusting agents and deposits. TOP quietness The new design for comfort The particularly careful design of BLUEHELIX TECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections. Remote control Environment and climate BLUEHELIX TECH RRT can be combined with a wide range of remote timer controls that allow remote control and control of the appliance. The ROMEO series is made up of several models, with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With the connection to the external probe, BLUEHELIX TECH RRT is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, guaranteeing the user greater comfort as the external climatic conditions vary. This function is internal to the electronic board of the boiler and therefore does not require the presence of the remote control , making the configuration operations easier in case of replacement. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Boiler control Control panel and functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs . The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems MC 2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC 2 : Multi Combustion Control , the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance" tm thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - Internal accessibility is favored by the 3-piece shell with removable side panels. - The electrical box of the electronic card can be easily extracted from the chassis and hooked laterally, leaving free access to the internal parts - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit - The burner door is totally self-cooled by air and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. - The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections . - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Simplified replacement Smoke outlet ø 50 mm The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters. FPS .: Fumes Protection System . The flue clapet valve allows easy connection to pressurized collective flue systems . For installers, the solution of the collective pressure pipe is cheaper Comfort & Safety The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life of the appliance Stop And Go function With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these " false starts " can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TECH RRT provides an electronic parameter through which it is possible to delay the ignition of the burner by activating it only in the face of actual withdrawals of domestic hot water Sun Easy function BLUEHELIX TECH RRT has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user Sanitary Eco-Comfort function In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable . Reaching maximum comfort certified 3 stars. The efficiency and load profiles according to the ErP directive are at the top of the category External installation and antifreeze function To make the most of the available space, the new BLUEHELIX TECH RRT 24C boiler can be installed recessed into the wall using the special kit. For more critical installations, in completely uncovered places not protected from the elements, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost . This function is active with the boiler powered by the gas circuit and under electrical voltage Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: IN ASSENZA DI QUESTO ARTICOLO, VERRA' SPEDITO IL MODELLO BLUEHELIX ALPHA 34  ATTENZIONE  Metano, Gpl, Aria propanata Ready mediante una semplice configurazione la caldaia è in grado di funzionare a metano, gpl ed aria propanata senza l’utilizzo di kit di conversione aggiuntivi. Per info, contattare preventivamente il centro assistenza autorizzato di zona Specifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica riscaldamento Classe A Efficienza energetica sanitario profilo XL Classe A Caratteristiche esercizio riscaldamento/sanitario: Portata termica (P.C.I.) Max Riscaldamento: 34,0 kW Portata termica (P.C.I.) Max Sanitario: 34,7 kW Potenza termica 80°C-60°C Max Riscaldamento: 30 kW Potenza termica 80°C-60°C Max Sanitario: 34,0 kW Rendimento termico utile 30%: 109,8% Pressione max esercizio riscaldamento bar 3 Capacità vaso di espansione riscaldamento litri 10 Grado protezione (IEC 60529) IP X5D Tensione di alimentazione V/Hz 230V / 50Hz Potenza elettrica assorbita W 88 Dimensioni LxAxP mm 420x700x320 5 anni senza pensieri Caldaia Ferroli BLUEHELIX TECH RRT Caldaie murali a condensazione ecologiche con cella di combustione Ferroli Thermobalance™ L'evoluzione continua.. La gamma di generatori è dotata del collaudato scambiatore in acciaio inox AISI 304. Progettata e costruita secondo le nuove direttive ErP per la progettazione ecocompatibile e labelling, BLUEHELIX TECH RRT si colloca al top della sua categoria. BLUEHELIX TECH RRT raggiunge un’efficienza energetica del riscaldamento d’ambiente tra le più alte della categoria della caldaia: ηs 94%. Inoltre con l’abbinamento alla sonda esterna ed al cronocomando remoto Romeo raggiunge la classe energetica di sistema A+ Garanzia estesa con la formula “5 ANNI SENZA PENSIERI” La qualità di Bluehelix TECH RRT non si discute, e Ferroli è pronta a metterla alla prova offrendo ai propri clienti una copertura di garanzia estesa che assicura anche la manutenzione periodica e le verifiche di Legge Efficienza al TOP anche su vecchi impianti Lo scambiatore del gruppo termico THERMOBALANCE™ di Bluehelix TECH RRT a confronto con il più classico e diffuso scambiatore in acciaio utilizzato in passato anche dal Gruppo Ferroli esclusivamente su una piccola serie di caldaie prodotte per il mercato inglese, e poi subito abbandonato in favore dell’evoluzione verso lo scambiatore proprietario in acciaio utilizzato nei modelli Bluehelix Questa geometria consente allo scambiatore del gruppo termico THERMOBALANCE di funzionare quasi al massimo dell’efficienza di progetto anche in condizioni di parziale intasamento, mentre a parità di quantità di depositi e sedimenti , ad esempio dovuti all’installazione su vecchi impianti , lo scambiatore tende a otturarsi molto più velocemente nella parte a contatto con la fiamma a causa della ridotta area di passaggio del fluido, in cui si viene a costituire una vera e propria barriera di depositi che ostacolano lo scambio termico e riducono l’efficienza al di sotto dei valori nominali. Plus del prodotto > Caldaia con scambiatore primario in acciaio inox ad elevato spessore, con passaggi maggiorati (ai vertici della categoria) a garanzia della durata e della ridotta manutenzione, mantiene un’alta efficienza anche su vecchi impianti con ossidazioni e sporcizia > Raggiunge un’efficienza stagionale del riscaldamento d’ambiente tra le più alte della sua categoria: ηs 94% e in abbinamento al comando remoto modulante e alla sonda esterna opzionale raggiunge la classe di efficienza superiore > Classe 6 NOx : già in linea da quanto previsto da regolamento ErP , emissioni NOx < 56mg/kWh. > MC2 : Multi Combustion Control, nuovo sistema di combustione con tecnologia brevettata gas-adaptive di derivazione industriale per una migliore adattabilità di utilizzo al variare delle condizioni della rete gas , come fluttuazioni o ridotte pressioni. > M.G.R: Metano Gpl Ready, mediante una semplice configurazione la caldaia è in grado di funzionare sia a metano che a gpl senza l’utilizzo di kit di conversione aggiuntivi > Esclusivo sistema scambiatore-bruciatore con porta autoraffreddata senza isolanti : semplifica la manutenzione e ne riduce il costo grazie ad un minor numero di parti deteriorabili. > Produzione istantanea di acqua calda sanitaria con scambiatore sanitario a piastre dedicato > Attacchi idraulici coperti dal mantello della caldaia > Ampio display grafico multifunzione a retroilluminazione per una facile e corretta impostazione parametri > By-pass di serie > Particolarmente adatta al funzionamento in canne fumarie che necessitano di intubamenti “pesanti” grazie alla omologazione per il funzionamento con scarichi fumi diametro 50mm > F.P.S : Sistema di Protezione Fumi. La valvola clapet fumi inserita di serie a bordo della caldaia permette una facile connessione a sistemi collettivi fumari in pressione > Progettata per semplificare ed agevolare le normali operazioni di manutenzione e pulizia > Predisposizione impianti solari : predisposta per la produzione di acqua calda sanitaria combinata con impianti a pannelli solari > Funzione ECO in sanitario per un maggior risparmio nel periodo di scarso utilizzo di acqua calda > Comfort certificato a 3 stelle in produzione sanitaria secondo EN 13203 > Funzionamento a temperatura scorrevole tramite sonda esterna opzionale > Circolatore riscaldamento modulante a basso consumo > Controllo fiamma digitale con tre tentativi di riaccensione in caso di blocco di funzionamento per mancanza rilevazione di fiamma , solo per funzionamento a metano > Luogo di installazione : anche per esterno in luogo parzialmente protetto fino a -5°C di serie e fino a -15°C con l’ausilio del kit resistenze antigelo opzionale Innovativo gruppo termico Ferroli THERMOBALANCETM nei suoi 5 elementi Ferroli ha orientato la progettazione della cella di combustione e dello scambiatore di Bluehelix TECH RRT in modo da massimizzarne i vantaggi funzionali e la robustezza costruttiva, oltre alla semplicità di manutenzione: il design monocircuito fa si che le eventuali bolle d’aria dell’impianto non restino intrappolate nello scambiatore, e ne agevola al massimo la pulizia con il lavaggio chimico, a differenza dagli scambiatori a spirale con doppio circuito parallelo  nei quali se uno solo dei circuiti si ottura il lavaggio chimico risulta molto più laborioso. Scambiatore inox monocircuito ad elevati passaggi, resistente all’intasamento e di facile pulizia Porta bruciatore autoraffreddata senza pannello isolante Esclusivo bruciatore semisferico inox speciale con guarnizione long-life Sistema intelligente “Gas-adaptive” derivato dalle caldaie industriali, che monitora e autostabilizza la combustione al variare delle condizioni gas + fumi Ventilatore disassato, per agevolare la manutenzione del gruppo termico senza smontaggio. Clapet antireflusso fumi integrato per collegamento a C.C.S. Il motore Cella di combustione Il tubo che costituisce lo scambiatore di BLUEHELIX TECH RRT è realizzato in acciaio inossidabile AISI 304, un materiale che permette di realizzare una superficie estremamente liscia, quindi meno aggredibile da agenti incrostanti e depositi. Silenziosità al TOP La nuova progettazione per il comfort La progettazione particolarmente curata di BLUEHELIX TECH RRT ha consentito di raggiungere valori significativi in termini di silenziosità e comfort acustico, tanto che si potrebbe quasi far fatica a distinguere il rumore di fondo di una abitazione dalla rumorosità prodotta dalla caldaia durante il funzionamento a regime. Anche i transitori di accensione/spegnimento della caldaia sono stati ottimizzati in funzione del comfort acustico, cosicché al cliente non toccherà più il fastidio di capire se la caldaia è accesa o spenta dalla sua rumorosità come sulle vecchie generazioni di caldaie. La progettazione ha curato anche il design, realizzando un mantello prezioso in 3 pezzi smontabili, che scende a coprire gli attacchi delle tubazioni. Il controllo in remoto Ambiente e climatico BLUEHELIX TECH RRT è abbinabile ad un’ampia gamma di cronocomandi remoti che permettono la regolazione e la conduzione dell’apparecchio a distanza. La serie ROMEO è composta da più modelli, con programmazione del comfort settimanale o giornaliero e con la possibilità di scegliere per entrambi tra il collegamento a fili o di tipo wireless Con il collegamento alla sonda esterna, BLUEHELIX TECH RRT è in grado di variare la temperatura di impianto in funzione della temperatura esterna misurata sulla base di curve climatiche configurabili, garantendo all’utente un maggior comfort al variare delle condizioni climatiche esterne. Questa funzionalità è interna alla scheda elettronica della caldaia e pertanto non richiede la presenza del comando remoto, rendendo più semplici le operazioni di configurazione nel caso di sostituzione. La funzione modulante di ROMEO consente una modulazione della potenza della caldaia man mano che si raggiunge il valore della temperatura ambiente impostato. Ciò migliora la qualità del comfort eliminando i picchi di calore con un conseguente risparmio energetico Il controllo in caldaia Quadro comandi e funzioni L’elettronica di controllo e gestione permette all’utente di personalizzare il funzionamento dell’apparecchio in modo da gestire il comfort ambientale secondo le proprie esigenze. Il pannello di comando a tasti ed il semplice display LCD, rendono estremamente facili ed intuitive le operazioni di programmazione per la produzione di acqua calda, sia per il sanitario che per il riscaldamento. Grazie alla connessione remota via bus ciò può essere fatto dirattamente anche dal comando remoto Romeo. La scheda è protetta da un fusibile facilmente accessibile grazie allo sportellino dedicato e i collegamenti elettrici beneficiano di una scatola robusta e di grandi dimensioni, con connettori di facile accesso e numerose fascette fermacavi. La caldaia è inoltre predisposta per collegare un secondo termostato ambiente sui morsetti dedicati per gestire impianti di miscelamento multizona MC2 Multi Combustion Control L’elettronica controlla la corrente di ionizzazione di fiamma in modo da garantire una combustione ottimale al variare della densità dell’aria o della qualità del gas. La relazione tra il rapporto aria/gas ed il segnale di ionizzazione di fiamma viene utilizzata per il controllo del rapporto aria gas stesso e quindi della combustione. MC2 : Multi Combustion Control, il nuovo sistema di combustione con tecnologia brevettata gas-adaptive migliora l’adattabilità di utilizzo al variare delle condizioni della rete gas Easy Maintenance Manutenzione senza problemi  Al momento della prima manutenzione, il tecnico si può rendere conto della cura con cui è stato progettato ogni dettaglio per agevolare il suo lavoro. Grazie alla massima accessibilità dei principali componenti, il gruppo termico “Thermobalance”tm permette di eseguire la manutenzione con massima precisione e velocità. Alcuni esempi: - L’accessibilità interna è favorita dal mantello in 3 pezzi con i fianchetti smontabili. - La scatola elettrica della scheda elettronica può essere facilmente estratta dallo chassis e agganciata lateralmente lasciando libero accesso alle parti interne - Il ventilatore disassato dal bruciatore e posto sotto, non deve essere smontato per accedere al gruppo bruciatore-scambiatore in acciaio - La porta del bruciatore è totalmente auto-raffreddata ad aria e quindi non necessita del pannello isolante, evitando il rischio che questo possa danneggiarsi o rompersi durante lo smontaggio per la pulizia. - Il bruciatore si smonta allentando soli 3 bulloni lasciando libero accesso allo scambiatore in acciaio inox. - Lo scambiatore a passaggi extra-maggiorati è concepito per sfidare le acque più dure ed è facilmente pulibile grazie al circuito a tubo singolo non collettorizzato. - Il filtro in ingresso dell’acqua sanitaria può essere estratto con estrema facilità direttamente dall’interno senza dover rimuovere gli attacchi idraulici della caldaia. - L’eventuale smontaggio e la sostituzione dello scambiatore a piastre avviene semplicemente mediante la rimozione di due bulloni a brugola accessibili frontalmente Sostituzione semplificata Scarico fumo ø 50 mm La nuova caldaia può essere installata anche con scarichi per intubamento diametro 50mm. Particolarmente importante nel mercato delle sostituzioni nel caso frequente di canne fumarie collettive che necessitano di intubamenti “pesanti” dove è necessario avere una elevata capacità di espulsione fumi anche con diametri ridotti. F.P.S.: Sistema di Protezione Fumi. La valvola clapet fumi permette una facile connessione a sistemi collettivi fumari in pressione. Per gli installatori la soluzione della canna collettiva in pressione è più economica Comfort & Sicurezza I progettisti hanno pensato ad una serie di funzioni in grado di garantire la qualità dell’acqua sanitaria, la miglior erogazione della potenza all’impianto di riscaldamento abbinati a una più lunga durata dell’apparecchio Funzione Stop And Go Con l’utilizzo di rubinetterie sanitarie a miscelazione brevi o brevissime erogazioni per veloci risciacqui comportano l’avvio della procedura di accensione della caldaia che solitamente si conclude immediatamente. Il perdurare di queste «false partenze» può, alla lunga, compromettere la vita media del prodotto. Per questo BLUEHELIX TECH RRT mette a disposizione un parametro dell’elettronica mediante il quale è possibile ritardare l’accensione del bruciatore attivandolo solamente a fronte di reali prelievi di acqua calda sanitaria Funzione Sun Easy BLUEHELIX TECH RRT è stata progettata per essere facilmente inserita negli impianti realizzati con le più recenti tecnologie. Il sistema SUN EASY, si avvale di un’elettronica che semplifica l’abbinamento con i pannelli solari sia a circolazione naturale che forzata. Tramite un sensore posto sul circuito sanitario controlla in maniera continua la temperatura dell’acqua preriscaldata dai pannelli solari prevedendo l’accensione del bruciatore solo nel caso che quest’ultima scenda sotto il livello necessario a garantire il comfort ottimale all’utente Funzione Eco-Comfort Sanitario In funzionamento ECO la produzione di acqua calda sanitaria avviene secondo gli standard tradizionali consentendo un risparmio energetico nei periodi di non utilizzo. In funzionamento COMFORT, grazie al particolare sistema di mantenimento in temperatura dello scambiatore di calore, l’erogazione di acqua calda sanitaria diventa ancora più rapida e confortevole. Raggiungendo il massimo comfort certificato 3 stelle. L’efficienza e i profili di carico secondo la direttiva ErP sono al top della categoria Installazione esterna e funzione antigelo Per sfruttare al massimo gli spazi a disposizione, la nuova caldaia BLUEHELIX TECH RRT 24C può essere installata ad incasso nella parete grazie all’apposito kit. Per installazioni più critiche, in luoghi completamente scoperti non protetti dagli agenti atmosferici, è disponibile anche il kit “mobiletto verniciato”. Nell’eventualità che la temperatura in caldaia scenda a 5°C, automaticamente si accende il bruciatore e si attiva il circolatore al fine di preservare l’apparecchio dai danni causati dal gelo. Tale funzione è attiva con la caldaia alimentata dal circuito gas e sotto tensione elettrica Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è di 24 mesi dalla data dell'acquisto.

Read more less

La caldaia viene fornita a metano. Trasformazione metano/GPL/Aria propanata da richiedere preventivamente al Centro Assistenza Autorizzato Caratteristiche tecniche Modello : Divatech D LN C 30 Codice prodotto : 0DCC6YWA Alimentazione : Metano / gpl Efficienza energetica Classe di efficienza energetica riscaldamento : C Classe di efficienza energetica sanitario : A Profilo in A.C.S. : XL Performance Potenza termica nominale riscaldamento : 11,1 ~ 30,0 kW Portata termica : 12,6 ~ 33,0 kW Potenza termica utile sanitaria : 30,0 kW Rendimento : 91,0 % Produzione massima di acqua calda sanitaria Δt 25°C : 17,2 l/min Produzione massima di acqua calda sanitaria Δt 30°C : 14,3 l/min NOx : 6 Dimensioni e peso Dimensioni (HxLxP) : 700x400x330 mm Peso a vuoto : 30,0 Kg Caldaia Ferroli DIVATECH D LN LOW NOX Caldaia murale con produzione sanitaria istantanea a doppio scambiatore , camera aperta, tiraggio naturale Punti di forza - Scambiatore primario di calore a geometria compatta interamente in rame - Produzione istantanea di acqua calda sanitaria con scambiatore sanitario a piastre dedicato - By-pass di serie - Caldaia a camera aperta e tiraggio naturale, con bruciatore atmosferico a basse emissioni di NOx, in acciaio inox AISI 304 - Circolatore alta efficienza a basso consumo (ErP - Classe A) con sistema antibloccaggio tramite attivazione per alcuni secondi ogni 24 ore di inattività - Abbinabile al cronocomando remoto modulante - Mantellatura verniciata di bianco per anaforesi a polveri epossidiche - Pannello comandi semplice e completo, interfaccia utente a display, con tasti di impostazione - Dimensioni compatte e peso contenuto Vantaggi di Divatech D LN - Portata termica modulante sia in riscaldamento che in produzione sanitaria, gestita da scheda elettronica a microprocessore - Sistema ECO/COMFORT per una rapida produzione dell’acqua calda sanitaria - Post-circolazione regolabile dopo la fase di riscaldamento - Predisposizione impianti solari: predisposta per la produzione di acqua calda sanitaria combinata con impianti a pannelli solari - Funzionamento certificato anche ad aria propanata mediante apposita trasformazione da richiedere al Centro Assistenza Autorizzato - Funzionamento anche a GPL con l’utilizzo di un apposito kit di conversione da richiedere al Centro Assistenza Autorizzato. Trasformazione gratuita in sede di verifica del prodotto ed attivazione della garanzia solo qualora il codice specifico funzionante a GPL non fosse disponibile Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Ferroli Bluehelix Sublime 34C condensing boiler cod. 0TSB7AWA complete with IOt connect fume exhaust kit with remote control and methane or LPG external probe - New Heating ERP class A+ Sanitary ERP Class A Load profile XXL Heating max / min heat input (Hs) kW 30.6 / 2.9 Max / min heat output heating (80/60°C) kW 30 / 2.8 Max / min heat output heating (50/30°C) kW 32.5 / 3.1 Max / min DHW heat input (Hi) kW 34.7 / 2.9 Max / min DHW thermal power kW 34.0 / 2.8 Efficiency 30% (Hi) % 109.5 Max / min heating pressure bar 3 / 0.8 Sanitary flow rate ∆t 25°C l/min 19.5 Dimensions HxWxD 700x420x320 BLUEHELIX extension The most beautiful boiler ever BLUEHELIX SUBLIME, the most beautiful wall boiler ever with an exclusive design (Patented) has finally arrived on the market. Its exclusive lines radically innovate the aesthetic concept proposed so far, through the use of crystal and the revolutionary use of curved shapes. A multicolored ambient LED, set in a central position, allows you to perceive the status and operating modes of the boiler, even on a chromatic level. The large 7'' color full touch screen display integrated in the front surface of black tempered glass allows the user to interact with the product in a totally smart way. Supplied with a rich series of accessories such as: smart remote control manageable from iOS and Android apps, plumbing connection kit complete with taps and cover, external temperature probe, router with integrated mobile network connectivity. Conceived to fully satisfy the requests of a "robust " product from every point of view: primary heat exchanger with high passages, secondary sanitary exchanger enhanced with 20 plates, high head circulator, new control electronics with integrated connectivity on the VODAFONE mobile network BUSINESS that does not require a home wifi network. All elements designed to ensure maximum efficiency and reliability over time. INNOVATION Developing sustainable and low environmental impact solutions capable of combating global warming is now a reality! BLUEHELIX SUBLIME is already capable of autonomously self-regulating (plug-in) and functioning correctly in total safety with mixtures of natural gas enriched with hydrogen already foreseen for distribution in Europe (*). BLUEHELIX SUBLIME is not only beautiful but achieves one of the highest energy efficiency of the room heating in the boiler category: ηs 94% and when combined with the remote timer control and the external probe (supplied as standard) it reaches the energy class system grade A+ (scale from G to A+++). TOP SILENCE: ONLY 45 dB* The particularly careful design of BLUEHELIX SUBLIME has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. THE CONNECTION REVOLUTION! BLUEHELIX SUBLIME is the first connected boiler that uses IoT technology integrated into the mobile network powered by Vodafone Business. (*) Finally an intelligent boiler capable of communicating with the user both via the App, with smartphone devices, but also via text messages or voice messages (Patent Pending) to all other telephone devices, without the need for a home wifi network! More than easy, easy! Thanks to the self-configured "mobile" gateway that does not require any user intervention. THE BOILER CONTROL It has never been so SMART to interact with a boiler. The innovative control and management electronics of BLUEHELIX SUBLIME is at the top levels of the category. The large 7'' full touch screen color graphic display allows real-time viewing of operating information thanks to simple and intuitive graphic screens. With a simple touch it is possible to set the temperature set points for heating and domestic hot water. Thanks to the contextual help, BLUEHELIX SUBLIME directly informs the user of the possible causes of the anomaly while providing the qualified technician with indications on possible solutions to be undertaken. If necessary, thanks to the standard integrated Vodafone Business IoT connectivity, it is possible to directly request the intervention of the authorized technical assistance centre. Even the system pressure is no longer a problem because thanks to the semi-automatic system electroloading function, a simple ''touch'' is enough and the boiler automatically restores the adequate pressure without requiring manual intervention by the user RICH EQUIPMENT OF ACCESSORIES Wired remote control for home comfort management also from Smartphone Available APP for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Maximization of room comfort with modulating regulation of the delivery temperature using the Room Climatic Compensation (CCA) and External Climatic Compensation (CCE) functions It improves the average seasonal efficiency in space heating by +4%. Weekly time programming in 30 minute intervals via app Alarm display also via app Operating modes: Off, Holiday, Automatic, Manual Three modifiable temperature levels: Comfort, Economy, Antifreeze MANAGEMENT THROUGH APP The new FERROLI digital platform makes it possible to manage domestic comfort in an extremely simple and intuitive way and to use the remote connectivity services of the Authorized Assistance Centre. Using the FERROLI SMART CONNECT smartphone app, it is possible to check the operating status of BLUEHELIX SUBLIME and change its settings to obtain the best possible room comfort. Similarly, the innovative EASY SERVICE management platform created for Authorized Assistance Centers allows you to remotely monitor the product, guaranteeing comfort and assistance at all times. HYDRAULIC ACCESSORIES The attention paid to aesthetics for BLUEHELIX SUBLIME has no limits. The boiler is standard equipped with a connection cover matching the product to cover the hydraulic kit (5 pipes + 4 taps). Finally, for the most demanding and design-conscious customers, a complete series of optional flue accessories in a color coordinated with the boiler is available. THE FERROLI THERMOBALANCE TM THERMAL GROUP IN ITS 5 ELEMENTS The combustion cell and the exchanger of BLUEHELIX SUBLIME maximize the functional advantages and the constructive sturdiness. The single-circuit design ensures that any air bubbles in the system do not remain trapped in the exchanger, and makes it as easy as possible to clean it with chemical washing. High flow single circuit stainless steel heat exchanger, resistant to clogging and easy to clean Self-cooled burner door without insulating panel Exclusive special stainless steel hemispherical burner with long-life gasket Intelligent "Gas-adaptive" system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary THE ENGINE: COMBUSTION CELL The tube that makes up the BLUEHELIX SUBLIME exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and deposits. THE ENHANCED HYDRAULIC UNIT All models in the BLUEHELIX SUBLIME series are equipped with a 20-plate DHW plate exchanger and a 7.5 mWc boosted heating circulator. The significant increase in the passage section of the 20-plate exchanger compared to a traditional 14 plates) greatly reduces clogging over time, even in the presence of particularly hard water, greatly increasing its average life and minimizing maintenance costs. The enhanced system circulation pump with a head of 7.5 meters allows all BLUEHELIX SUBLIME models to function correctly, delivering all the necessary power even in systems with high head losses (particularly large new systems or old systems with ). MC2 : MULTI COMBUSTION CONTROL The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Furthermore, the new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34C model. In this way BLUEHELIX SUBLIME is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off operations which increase operating costs and reduce the average life of the product. IDENTITY CARD Aesthetics with exclusive lines (Patent) that radically innovate the design concept through the use of tempered glass and curved shapes IoT CONNECT: Vodafone Business advanced connectivity on standard mobile network capable of interacting with the user via App/Sms with smartphone devices, but also via voice messages to any telephone device Wide range of accessories supplied as standard: wired remote control that can be managed via the App, external probe, router for mobile network connectivity, hydraulic connection kits, connection cover Boiler with thick stainless steel primary exchanger, with increased passages to guarantee durability and reduced maintenance Enhanced modulating heating circulator with high head on all models able to adapt even to particularly resistant systems > Standard electrocharging Enhanced domestic hot water exchanger with a high number of plates particularly immune to blockages and capable of maintaining the domestic hot water production capacity constant over time thanks to the combination with the modulating remote control and the external temperature probe, supplied as standard, it reaches the maximum energy efficiency A+(scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34C, 1:10 mod. 28C) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology for better adaptability of use to varying gas network conditions Thanks to the standard mobile network connectivity, the user does not need to purchase additional components/contracts for setting up a home wifi network. 7 inch color graphic touch screen display Immediate display of the operating status thanks to the front multicolor LED Particularly suitable for operation in flues that require "heavy" ducting Designed to simplify and facilitate normal maintenance and cleaning operations Simplified electrical wiring that does not require removal of the boiler shell thanks to direct access to the external connection terminal block available on the bottom of the product EASY SERVICE: thanks to the continuous monitoring of the operating parameters, it is possible to activate remote technical assistance contracts through the Authorized Assistance Centers Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION THE BOILER CAN OPERATE WITH METHANE. LPG AND PROPANE AIR WITHOUT THE USE OF ADDITIONAL CONVERSION KITS. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ferroli Bluehelix Maxima 34C condensing boiler complete with Wi-Fi flue gas exhaust kit Optional Class A Methane or LPG low NOx - NEW 0TSB7MWA Energy label specifications according to the European ErP directive Heating energy efficiency Class A+ (in combination with the connect command) Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Max heating heat input (Hs) kW 30.6 Max DHW heat input (Hi) kW 34.7 Efficiency 30% % 109.5 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 10 litres Sanitary flow rate ∆t 25°C l/min 19.5 IP X4D protection degree Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x320 Methane or LPG MGR: Methane, LPG, Propane air Ready. The boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits Bluehelix Maxima - Functionality at its maximum expression The exclusive lines of BLUEHELIX MAXIMA radically innovate the aesthetic concept proposed so far through the use of crystal and the revolutionary use of curved shapes. A multicolored LED environment , set in a central position, allows you to perceive the status and operating modes of the boiler, even on a chromatic level. The large 7'' full color touch screen display integrated in the front surface of black tempered glass allows the user to interact in a totally smart way with the product thanks also to the combination with the smart CONNECT remote control manageable from iOS and Android apps . Conceived to fully satisfy the requests for a "robust" product from every point of view: primary heat exchanger with high passages, secondary domestic heat exchanger enhanced with 20 plates, high head circulator, new control electronics. All these elements are designed to ensure maximum efficiency and reliability over time also, and not only, to replace old generators in particularly dirty systems: ideal for "carefree" replacement MAXIMUM SILENCE: ONLY 45 dB The particularly careful design of BLUEHELIX MAXIMA has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers MAXIMUM INNOVATION Developing sustainable and low environmental impact solutions capable of combating global warming is now a reality! BLUEHELIX MAXIMA is already capable of autonomously self-regulating (plug-in) and functioning correctly in total safety with mixtures of natural gas enriched with hydrogen already foreseen for distribution in Europe (*) THE BOILER CONTROL The innovative control and management electronics of BLUEHELIX MAXIMA is at the top levels of the category. The large 7'' full touch screen color graphic display allows real-time viewing of operating information thanks to simple and intuitive graphic screens. With a simple touch it is possible to set the temperature set points for heating and domestic hot water. Thanks to the contextual help, BLUEHELIX MAXIMA directly informs the user of the possible causes of the anomaly while providing the qualified technician with indications on possible solutions to undertake. Even the system pressure is no longer a problem because thanks to the semi-automatic system electroloading function, a simple ''touch'' is enough and the boiler automatically restores the adequate pressure without requiring manual intervention by the user. CONNECT The remote control Remote control supplied with the class A+ kit code for home comfort management also from Smartphone (*) Connection to the home WiFi network for internet access via the supplied RF/WiFi receiver CONNECT APP available for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Maximization of room comfort with modulating regulation of the flow temperature using the functions Environmental Climatic Compensation (CCA) and Compensation External Climatic (CCE) via external temperature detectable directly from the internet (or from an optional external probe) It improves the average seasonal efficiency in space heating by +4%. Weekly time programming in 30-minute intervals via APP CONNECT Alarm display also via APP CONNECT Operating modes: Off, Holiday, Automatic, Manual Three modifiable temperature levels: Comfort, Economy, Antifreeze TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) The geometry of the BLUEHELIX MAXIMA THERMOBALANCE™ thermal unit exchanger (figure A) allows operation at almost maximum design efficiency even in conditions of partial clogging, while with the same amount of deposits and sediments (e.g. due to the installation action on old systems) the traditional exchanger in figure B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits* is formed which hinder the heat exchange and reduce the efficiency below the nominal values. THE ENHANCED HYDRAULIC UNIT All models in the BLUEHELIX MAXIMA series are equipped with a 20-plate DHW plate heat exchanger and a 7.5 mWC head boosted heating circulator The considerable increase in the passage section of the 20-plate exchanger compared to a traditional one (e.g. with 14 plates) greatly reduces clogging over time, even in the presence of particularly hard water, greatly increasing its average life and reducing maintenance costs to a minimum. The enhanced system circulation pump with a head of 7.5 meters allows all BLUEHELIX MAXIMA models to function correctly, delivering all the necessary power even in systems with high pressure drops (particularly large new systems or old systems with ). MC2 : MULTI COMBUSTION CONTROL The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2: Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Furthermore, the new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34C model. In this way BLUEHELIX MAXIMA is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off operations which increase operating costs and reduce the average life of the product. CHARACTERISTICS Aesthetics with exclusive lines (Patent) that radically innovate the design concept through the use of tempered glass and curved shapes Wide range of optional accessories: CONNECT wi-fi remote control kit manageable via App, hydraulic connection kits (5 pipes, 4 taps), connection cover Boiler with thick stainless steel primary exchanger, with increased passages to guarantee durability and reduced maintenance Enhanced modulating heating circulator with high head on all models able to adapt even to particularly resistant systems Semi-automatic system electroloading as standard Enhanced domestic hot water exchanger with a high number of plates particularly immune to blockages and capable of maintaining the domestic hot water production capacity constant over time thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34C, 1:10 mod. 28C) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology for better adaptability of use to varying gas network conditions 7 inch color graphic touch screen display Immediate display of the operating status thanks to the front multicolor LED Particularly suitable for operation in flues that require "heavy" ducting, thanks to operation with 50 mm diameter smoke outlets Designed to simplify and facilitate normal maintenance and cleaning operations thanks to easy access to internal components Simplified electrical wiring that does not require removal of the boiler shell thanks to direct access to the external connection terminal block available on the bottom of the product Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less