Unical KONe C28 Low NOx condensing boiler complete with flue kit - NEW ErP Model: KONe 28C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power: 28.9kW Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 15.8kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 88.4% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 5.3 kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 97.5% Annual electricity consumption QHE GJ: 49 Heating energy efficiency. of water ηWH: 85% Daily fuel consumption Qfuel : 23.05 kWh Sound power level indoors Lwa db(A) 55.2 Annual electricity consumption AEC: 402 kWh Specific sanitary water flow rate (Dt 30 °C): 13 l/min DHW production in cont. Dt 25 K (mixed): 15.5 l/min Expansion vessel capacity: 10 l Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 37kg KONe KONe is a wall-hung condensing boiler with very low polluting emissions, thus falling within the new Class 6, the most restrictive currently in force. It is available in instant combined version. KONe has all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) ηs 93% (EU regulation 813/2013 - dir. ERP 2009/125/CE) Energy class A Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx class 6 (according to EN 15502-1) thanks to the fully electronic modulating premix burner with constant combustion ratio (both gas valve and fan) Production of hot water up to 13.3 l/min Dt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) exchanger in AISI 316L stainless steel "Pit stop" maintenance for technical assistance interventions "Soft touch" control panel with "Upgradable" protective closure via USB connection for diagnostics/programming with computer or dedicated handheld tool High efficiency modulating circulator HWS "Hot Water Speed" is the special KONe electronics that switches from heating to DHW function with burner and pump always active, improving user comfort who does not have to wait for hot water Management of 2 zones with 2 thermostats (modulating/on -off) thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) Sliding temperature programmed to operate with the lowest possible delivery temperature to help save energy Anti-overheating post-circulation automatically after the burner goes out, the boiler keeps the pump running for 5 minutes, preserving the components Chimney sweep function allows maintenance technicians to carry out the checks required by current standards in terms of efficiency and emissions Pump anti-blocking the blocking of the pump following long stops is avoided thanks to an automatic impulse of 5 sec. Everything like in a “Sim Card” All the operating characteristics of the boiler are memorized inside a SIM. The Unical Assistance Center is equipped with a handheld instrument with a 3" touchscreen that can be connected directly to KONe to develop the monitoring activity by speeding up the intervention times for solving any problems: data acquisition for a computer analysis monitoring in real-time operating parameters even remotely (from the office or PDA) management of "faults-history" “Pit stop” maintenance in less than 2 minutes KONe is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Unical KON1 28C kW Methane or LPG Condensing Boiler Complete with Fume Exhaust Kit, various colors available - NEW ErP Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power: 33.8 kW Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 18.2kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87.5% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C) P1 kW: 6.1 kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 97.5% Annual electricity consumption QHE GJ: 56 Heating energy efficiency. of water ηWH: 85% Daily fuel consumption Qfuel : 23.13 kWh Sound power level indoors Lwa dB(A) 55.2 Annual electricity consumption AEC: 402 kWh DHW production in cont. Dt 25 K (mixed): 18.3 l/min Expansion vessel capacity: 10 l Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 810x450x345 mm; 40kg Gas transformation kit inside documentation envelope KON1 KON1 is the latest among the "furnishing boilers" that Unical presents in synergy with the ArtÙ Design Studio. Soft lines and an elegant front, available in different colours, enclose a latest generation condensing boiler running on methane or LPG, with instantaneous hot water production up to 18 l/min. KON1 can also be installed with a completely hidden flue system. The range includes 3 powers: 24, 28 and 35 kW. The exclusive Unical system of both hydraulic connections and the totally disappearing smoke outlet, allows an elegant installation and integration of KON1 in both modern and classic environments, avoiding unsightly exposed pipes. HWS “Hot Water Speed” is the new electronics of KON1 which switches from heating to DHW function with burner and pump always active, considerably improving the comfort of the user who does not have to wait for hot water. Secondary exchanger In AISI 316L stainless steel - with 12 plates (mod. 24) - with 16 plates (mod. 28 and 35) Particularly efficient because it is suitable for condensing boilers by exploiting their low temperature. Its "ecological" project is distinguished by a new design of the plates which allows for the transfer of a greater quantity of heat by making the most of the characteristics of stainless steel. Outstanding modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) ηs 93% (EU regulation 813/2013 - dir. ERP 2009/125/CE) Energy class A Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function Low NOx class 6 (according to EN 15502-1) thanks to the modulating premix burner Hot water production up to 18.3 l/min Dt 25 with special heat exchanger Management of 2 temperature zones (high/low) by applying a second on/off thermostat "Pit stop" maintenance and convenient internal control panel for technical assistance interventions EASYr : remote control (standard) with chronothermostat functions, applicable wirelessly to the wall or free-standing with support High efficiency modulating circulator Prepared for future applications in systems and suitable to meet the requirements of the new installation standards No visible command on the boiler, but it is EASYr (standard) which, without wires, performs the dual function of chronothermostat and remote control inside the home. Two-way radio frequency communications; Operating parameters control; Weekly programming; Room antifreeze function; Can be combined with external probe; Applicable to the wall or free-standing with support Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: PRODUCT DISCONTINUED --> THE NEW MODEL EXCLUSIVE GREEN E 25 WILL BE SHIPPED Beretta EXCLUSIVE GREEN HE 25 boiler Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Heating nominal heat output: 21.44 kW Classification European Directive EEC 92/42: ★ ★ ★ ★ Sanitary comfort ★ ★ ★ (EN 13203) NOx emission class: 5 (UNI EN 677) Efficiency at rated power: 98.7% Efficiency at reduced load (30%): 109.6% Total electric power: 93W Electrical protection degree: iP X5D Expansion tank capacity: 9 lt Quantity of hot water with Δt=25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Sanitary water temperature selection range: 35 - 60°C Dimensions (hxlxp) mm 845x453x358 ; 44kg METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control). EXCLUSIVE GREEN HE HI-EFFICIENCY ECOLOGICAL CONDENSING WALL-MOUNTS The new Exclusive Green E condensing boilers, equipped with the innovative Beretta front exchanger, in addition to implementing the requests of the ErP standards, improve all the peculiarities confirming themselves as top of the range. Seasonal efficiency up to 94%, very wide modulation range (up to 1:10), low consumption modulating circulator with the possibility of increasing the head up to 7m and reduced consumption are some of the main features. The new Exclusive Green E boilers also offer excellent reliability and technology and, thanks to their high performance, are an excellent solution in hybrid systems with solar thermal and heat pumps. The external probe that allows you to activate the climatic thermoregulation is standard as standard. Furthermore, by adding the optional BeSMART WiFi Comfort Control kit and the LINK MODE interface board kit, Exclusive Green E constitutes a class A+ system and home comfort can be governed by remotely via APP for smartphones and tablets. The boilers are equipped with a special high-head fan designed to be able to pipe flues with Ø 60 mm or Ø 50 mm flues. Front access condensing heat exchanger ( New ! ) The Exclusive Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. Modulation 1:10 The range offers a wide range of modulation to respond to real energy needs, while simultaneously offering a high reduction in consumption. Beretta realizes this system through a totally pneumatic and therefore safe and reliable model. The electronics in fact act only on the number of fan revolutions (inlet air flow rate) without intervening on the injection of the gas quantity which is automatically sucked in. Beretta therefore introduces a new double distribution mixer: a mechanical damper with a calibrated weight which opens or closes a part of the section of the venturi so as to divide the modulation range into two stages (smaller section with low air flow rates or larger section with high air flow rates). Beretta has also developed a specific silencer in the air intake to reduce any resonances generated by the new mixer. Warranty All products for sale on our site are new and packed. The guarantee yes

Read more less

Technical features Model: rinNOVA COND PLUS E 35S Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Heating / DHW nominal heat input kW 29.0 / 33.5 Heating / DHW maximum useful output 60°/80°C * 28.2 / 32.5 Energy yield n° **** NOx class 6 Expansion vessel capacity 7.0 l (total) Maximum range (ΔT=25K) / (ΔT=35K) 18.6 / 13.3 Degree of protection IPX5D Dimensions HxWxD 700x400x290; 34.5Kg General characteristics renew COND PLUS RinNova Cond Plus is the new BIASI range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with display. Available in versions for heating and domestic hot water production and for heating only RinNova Cond Plus presents a complete range of powers, 20 and 30 kW combi models and 16 KW SV models, in the same extremely compact dimensions (700 x 400 x 290 mm) . RinNova Cond Plus has its strong point in the innovative heat exchanger designed to provide high yields that last over time digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire BIASI condensing range, RinNova Cond Plus allows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed Characteristics: High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort (★★★ EN 13203) Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, built in stainless steel (Class NOx 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tank High efficiency pump with low energy consumption Maximum power adjustable according to the system • IPX5D degree of protection Can be installed in a partially protected place Integration with BIASI solar systems, using a solar kit Digital control panel with backlit display Analog pressure reading Arrangement for remote control and external probe. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display and fill guide View annual maintenance expiry The display operates according to the modes: 1. INFO. Info mode displays the following information: External temperature (in case of external probe connected) K value (in case of external probe connected) Sanitary / heating temperatures chosen by the user Smoke temperatures. 2. PROGRAMMING. The programming mode allows you to change the boiler parameters. - In chimney sweep mode it is possible to test the boiler and adjust the gas valve. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. RinNova Cond Plus will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home. High regulation single coil primary heat exchanger Biasi introduces on the market the new stainless steel heat exchanger for condensing boilers: Round. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single strip of stainless steel to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit. The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive ( ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product you wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015 , the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; technical data sheet of the system with the parts relating to the product or system already completed. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: all appliances and/or systems have their respective labels and make sure that they are clearly visible; all devices and/or systems are always accompanied by the mandatory technical data sheets; any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP) : The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max heat input kW 28.0 Nominal thermal power kW 27.0 Efficiency Pmax (80/60°C) % 103.5 Directive efficiency class 92/42 EEC **** Max. heating operating pressure bars 3 Heating pressure min. bars 0.8 Domestic hot water production: -Δt 25°C: 15.7 l/min -Δt 30°C: 13.0 l/min Sanitary working pressure Max: 9 bar Dimensions WxHxD mm 700x400x320 mm Power supply: METHANE *NB: ALSO OPERATES ON LPG WITH THE USE OF A SPECIAL CONVERSION KIT TO BE REQUESTED FROM THE AUTHORIZED SERVICE CENTRE. General characteristics DIVACONDENS F28 D DIVACONDENS D is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes. ADVANTAGES Robust post-condenser powered by the closed circuit of the primary circuit, i.e. without the inlet of external mains water. The heat exchange with the fumes takes place inside large diameter water passages. Generator with simple and rational operation Condensate collection device to protect the air pressure switch, for regular combustion even in the presence of very cold external temperatures ECO function in DHW for greater savings in the period of low use of hot water Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place down to -5°C as standard Certified operation also with propane air (50% air – 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. THE BOILER CONTROL The control box of DIVACONDENS D consists of an easy to use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. MAIN COMPONENTS RECOVERY UNIT/HYDRAULIC DIAGRAMS FUME THERMOSTAT It preserves the integrity of the polypropylene pipes and, together with the air pressure switch, constitutes a double safety device for the evacuation system. OPTIMIZE COMFORT AND SAVINGS ROMEO TIMER (optional) The Romeo remote control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. Romeo is available with wired or wireless connection. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. HIGH EFFICIENCY CIRCULATOR EU regulation 622/2012 establishes that all boilers introduced on the market from 1 August 2015 must be equipped with a high-efficiency circulator (technically speaking, with an EEI, energy efficiency index ≤ 0.23). This decision was taken following the enormous energy consumption of all pumps and circulators installed in different applications in Europe. In practice, a high-efficiency circulator - incorporated in the boiler - reduces up to 30% of the total electricity consumption of the boiler itself. ONE CENT PER HOUR If we consider the maximum consumption of the pump mounted on the Divacondens D (0.04 kWh) compared to the previous circulator (0.085 kWh) we will save almost a euro cent for each hour of operation (electricity cost €0.19/kWh). Let's therefore multiply this tiny value by each hour of operation of the circulator in a year (for example 2,500 hours, for a moderately cold climate) ... €21.40 will be the annual saving if we replace an old boiler, and therefore also a old circulator, with Divacondens SUN EASY FUNCTION DIVACONDENS D boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, by exploiting and integrating even the smallest solar contribution, otherwise lost by mixing the thermostatic valves. FUNCTIONS ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied due to thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. OPERATION IN SLIDING TEMPERATURE With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO alDENS 24* CONDENSING BOILER COMPLETE WITH LPG METHANE FUME KIT ideal for radiator systems - NEW ErP Technical specifications Model:ÿALDENS HE Product codeÿLPG: 103021021000 Product codeÿMETHANE: 103121029000 Technical data according to ErP directives Energy efficiency class in heating: A Sanitary energy efficiency class: A Load profiles: XLÿ Technical features: Minimum/Nominal useful power kW 2.9 ú 23.0 Minimum heat input with Methane/ Propan3.0 / 4.4 Efficiency class:ÿ Efficiency at nominal load in CONDENSATION % 100.9 Profitability at 30% of load% 98.6 NOx class 5 Operating temperature in heating min./maxøC 30 - 85 Adjustable temperature in sanitarywareøC 38 ú 60 DHW production mixed with t 25 l/min 13.2 Capacity of expansion vessel l 8 Supply voltageÿV-Hz 230/50 Degrees of protection IP X5D Dimensions HxWxD mm 700x420x345; 34 kgs Main features ALDENS ALDENS the new SAVIO range of condensing wall mounted boilers: excellent performance thanks to the aluminum heat exchanger and ease of use thanks to the control panel with knobs and display. Available in the combi version which combines the heating function and the production of domestic hot water. ALDENS presents a complete range of powers, 24 and 35 kW combi in the same extremely compact dimensions (700 x 420 x 345 mm). ALDENS has the strong point in the innovative primary heat exchanger in Al/Si/Mg with low water content designed to provide high yields that last over time. The digital display communicates the boiler operating parameters to the user in an easy and convenient way. Like the entire condensing range, SAVIO ALDENS allows you to make the most of savings from climatic thermoregulation, based on the system in which the boiler is installed. Main features: Outstanding fine 1:8 modulation ratio Efficiency>107% (ex dir. CE 92/42) Primary heat exchanger in ultra-flat Al/Si/Mg Electronics with HWS or Hot Water Speed ​​function? Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of fine hot water 13.3 l/min t 25 with special 12-plate (mod. 24 kW) and 16-plate (mod. 35 kW) exchanger in stainless steel Maintenance or Pit Stop? simple and intuitive control panel High efficiency modulating circulator (in line with ErP Dir. 2015) Sanitary exchanger Sanitary comfort ensured by the suitably sized plate exchanger to guarantee the best performance in terms of domestic hot water, reducing the waiting time and guaranteeing temperature stability. Modulating circulator with deaerator It represents the state of the art in the standard of high efficiency. In line with the ErP directive of 2015, with less than 1 W of consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed on the delivery/return automatically doses the boiler power to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Exclusive Ai/Si/Mg heat exchanger It is made in a special Aluminum/Silicon/Magnesium alloy which ensures its efficiency and resistance over time. Thanks to the configuration of internal heat exchangers, efficiencies higher than 107% are achieved in the condensing regime, which means great economic savings and very low environmental impact for the user. The 35 kW version suitably increased. Plus Manage 2 zones with 2 thermostats:ÿALDENS versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 different temperature heating zones (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats.ÿ Anti-overheating post-circulation:ÿFor 15 seconds, it maintains the thermal balance between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of.ÿ Sliding temperature operations:ÿFor maximum running economy.ÿ Antifreeze protection:ÿIt intervenes at 5°C and is activated in both domestic hot water and heating, bringing the temperature in the boiler to 15°C. The risk is avoided that ALDENS may freeze if low temperatures persist in the room where it is installed. If there is a lack of gas, the block signal will appear on the display.ÿ Pump anti-blocking: blocking of the pump following long stops is avoided thanks to an automatic 5-second pulse that the electronics sends to the motor every 24 hours of stop The multifunction LCD display, with timed backlighting, allows: Reading of the heating and sanitary temperatures Display of lockout due to lack of flame Error code display Malfunction signaling Operating/stand-by status Burner operating status Diagnostics with signaling of 11 anomalies Ecodesign Directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

Ariston open chamber boiler BS II 24 CF gpl Power 24 kW Nominal heat input 25.3 kW Dimensions 40x77x31.5 cm Energy efficiency stars (dir 92/42/EEC) *** Performance stars (heating and hot water production) *** Efficiency at nominal heat input 90.7% Efficiency at 30% of the thermal capacity 88.8% LPG power supply NB The boiler will be supplied native to methane and will be supplied with the free transformation kit BS II The brand new BS II 24 CF AUTOMATIC boiler, maximum efficiency and minimum consumption. It is increasingly important to contain consumption, both due to the growing cost of fuel and to help keep the environment as healthy as possible. This is why BS AUTOMATICA was born, the new wall mounted boiler with intelligent technology. In fact, the boiler chooses the optimal operating conditions in constant relationship with the outside, thanks to an innovative technology of sensors and system management. Comfort function to have domestic hot water in 5 seconds, Saving function to obtain 15% reduction in consumption and many other functions make the BS a product of very high technological efficiency, suitable for any type of heating requirement The BS compact wall-mounted boiler is available in the heating and domestic hot water production version in 2 powers: 24 kW (open chamber) and 24 kW (sealed chamber) and is set up for solar system management. It is equipped with a self-diagnosis system, via LED, which simplifies domestic management of the boiler and facilitates intervention by technical assistance in the event of any anomalies. This product is made by the manufacturer in only one version: methane. However, the boiler is approved to operate on LPG as well. By simply replacing the original nozzles, supplied by the parent company, the boiler will work regularly with LPG fuel. EQUIPMENT: Protection against freezing, limescale and circulator blocking. Arrangement for devices for wireless adjustments Cold water inlet and heating return filters. Multifunction led interface. LED self-diagnosis system. Increased expansion vessel. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ARISTON GENUS PREMIUM NET 35 EU SMART Wi-Fi CONDENSING BOILER COMPLETE WITH LPG FUME KIT - NEW ErP Product code: 3300906 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 31/3.5 Max/min heating thermal power (80°C-60°C) kW 30.1/3.4 Efficiency at nominal heat input (60/80°C) % 97.7 Efficiency at nominal heat input (30/50°C) % 106.5 Efficiency at 30% at 30°C % 108.7 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in sanitary mode (10 min. with ∆T=30°C) litres/min 16.0 Quantity of hot water ∆T=25°C litres/min 19.3 Quantity of hot water ∆T=35°C litres/min 13.8 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 77 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/400/385 Genus Premium NET The top-of-the-range condensing boiler, complete with connectivity service. The Genus Premium NET wall-mounted boiler, in addition to being the maximum expression of the Ariston range, is already ready for use of the connectivity service. Thanks to the condensing technology, by recovering the energy of the exhaust fumes, it generates an increase in the calorific value which makes it possible to eliminate waste (of energy) and to obtain higher thermal efficiency than conventional boilers. Genus Premium Evo offers even greater performance thanks to the innovative technology that allows it to self-regulate according to variations in the external and internal temperature of the room, allowing energy savings of up to 35% compared to an older generation boiler. It is available in the heating and domestic hot water production version in 2 powers: 24-35 kW. Characteristics: Can be installed in partially protected places Large backlit dot matrix screen Continuous modulation high efficiency circulator Modulation ratio 1:10 Acoustic comfort guaranteed by the lower number of boiler on and off cycles, new silencer and sound-absorbing panels Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters 60mm split exhaust + COMFORT: The system manager constantly monitors the room temperature even if you are away from home. No more surprises when you return! + SAVINGS: It is possible to synchronize the temperature in your home with the rhythms of your life, avoiding useless ignitions of the boiler. Lower consumption in the bill, less stress for your system! + RELIABILITY: Your trusted TAC will assist you constantly by monitoring the performance and correct functioning of your system. Serenity will always be by your side THREE SIMPLE STEPS TO GET THE MAXIMUM BENEFITS FROM THE INNOVATIVE PACKAGE 1. RECEIVE THE BOILER COMPLETE WITH THE CONNECTIVITY KIT DIRECTLY AT HOME 2. DOWNLOAD THE FREE APP TO MANAGE THE SYSTEM EVEN AWAY FROM HOME 3. CHOOSE THE TRUSTED CAT FOR CONSTANT ASSISTANCE AND TO ENSURE OPTIMAL PERFORMANCE AT ALL TIMES* Comfort and savings within reach of your smartphone, one more reason to switch to AristonNet! Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli condensing boiler Bluehelix HiTech RRT 28 H complete with low NOx methane or LPG fume exhaust kit for heating only - New Heating ERP Class A Heating capacity max / min kW 28.5 / 3.5 Yield 30% % 109.7 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 8 litres Protection degree (IEC 60529) IP X4D Dimensions HxWxD mm 700x420x320 Bluehelix HiTech RRT H (Heating Only) The new user interface with «capsense» technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply. Thanks to the energy efficiency of the space heating ηs 94% among the highest in the category (Class A ErP, scale from G to A++) and to the combination with the Connect remote control, able to read the outside temperature directly from the internet, reaches the system energy class A+ (scale from G to A+++). Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Thanks to the "Hydrogen plug-in" system, one of its most important innovations, it is already able to self-regulate to work with mixtures of natural gas and hydrogen, which will soon arrive in Europe, to combat global warming. Conceived to fully satisfy the requests for a "robust" product from every point of view thanks to the high-passage primary exchanger capable of guaranteeing maximum efficiency and reliability over time also, and not only, as a replacement for old generators in particularly dirty systems . Silence at the top The particularly careful design of BLUEHELIX HITECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. It will be difficult to realize whether the boiler is on or off from its noise, as on older generations of boilers, because even the on/off transients have been optimized according to acoustic comfort. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections Characteristics Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Class 6 NOx: already in line with the provisions of the ErP regulation from 26.09.2018 (NOx emissions < 56mg/kWh) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Methane LPG Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door (without insulators): simplifies maintenance and reduces its cost thanks to fewer perishable parts Instantaneous production of DHW with dedicated DHW plate heat exchanger (only for version C) Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems ECO function in DHW for greater savings in the period of low use of hot water (only for version C) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only for methane operation) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Boiler control The new user interface with ''capsense'' technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply, customizing the operation of the appliance in so as to manage the environmental comfort according to one's needs. Thanks to the remote connection via bus, this can also be done directly from the CONNECT remote control, even via smartphone. The boiler is also set up to connect a second room thermostat to dedicated terminals to manage multi-zone systems. TOP EFFICIENCY Even on old systems (replacements) The BLUEHELIX HITECH RRT heat exchanger THERMOBALANCE™ (fig. A) compared to the more classic and widespread steel exchanger (fig. B) also used in the past by the Ferroli Group exclusively on a small series of boilers produced for the market English, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values MC2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can see the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger group. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Thema Condens 35 SB Product code : 0010025117 Power supply: Methane Possibility of propane power supply via simple regulation Performance Energy efficiency class in heating: A Firebox flow rate Qmin/max - 80/60 °C : 4.1 - 34.8 kW Dimensions Dimensions (HxWxD): 740x418x344 mm 5 Year Warranty Extension Program THEMA Condens SB Wall-mounted condensing boiler combined for heating and domestic hot water of single-family units The new Thema Condens features a renewed aesthetic with modern and essential lines, flat casing to facilitate installation (dimensions and hydraulic connections unchanged compared to the previous version) and a new touch-screen user interface. The boiler has been designed as the ideal solution for single-family homes in the case of replacing traditional wall-mounted or condensing boilers that work on high-temperature or low-temperature systems. The high level of domestic comfort is guaranteed by the exclusive Aquaspeed® technology capable of offering the user immediate delivery of hot water at the desired temperature, without long waiting times and expensive waste of water. Preheating the primary circuit, and therefore also the secondary stainless steel plate exchanger, ensures an instantaneous response from the boiler to any sudden request for domestic hot water. Thema Condens is available in three power sizes: the 25 and 30 kW versions are joined by the new 35 kW size, all powered by methane but convertible to propane via simple electronic regulation, without the need for any conversion kit. The range is also enriched with a new solution: the SB version (heating only) of 25, 30 and 35 kW, which can be combined with any Hermann Saunier Duval boiler. The new SB boilers are also powered by methane, but can be converted to commercial propane electronically. Ideal for installation in single-family homes New FlameFit® combustion system Instantly available hot water thanks to Aquaspeed® technology New design with flat casing and touch-screen user interface New heating-only versions of 25, 30 and 35 kW ErP class A+ in combination with MiGo climate control unit FlameFit® technology: maximum safety, low consumption, reduced emissions. The innovative FlameFit® combustion technology that the single-family unit version is equipped with allows the boiler to be independently adapted to different types and qualities of gas, always guaranteeing optimised and completely safe operation. The flame control electrode detects the various characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the boiler's operation to the user's actual needs. This therefore results in high performance with a reduced quantity of gas, saving energy and consequently limiting consumption and polluting emissions. FlameFit® technology makes Thema Condens already set up for immediate operation with any type of future gas, without the need for any conversion kit. Touch-screen user interface The interface of the new Thema Condens features a modern digital touch display and has been developed to facilitate the user's management of the boiler. The symbols on the various keys allow for a quick understanding of the functions of the appliance and the ways of setting parameters according to your comfort needs. Excellent visibility of parameters and icons Flow temperature regulation Intuitive navigation Simplified programming All parameters under control Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello condensing boiler Family 30 KIS Low NOx complete with methane or LPG fume exhaust kit class A - NEW Energy class in heating A Energy class in sanitary A XL load profile Heating Nominal heat input kW 25.0 Nominal thermal power (80°-60°) kW 24.4 Expansion vessel L 10 Sanitary Nominal heat input kW 30 Nominal thermal power** kW 31.5 Maximum pressure bar 8 Hot water production with T+25 °C l/min 18.1 NOx class 6 Dimensions Dimensions (H***xLxP) mm 822x470x275; 39 kgs Methane or LPG power supply: the boiler is self-adapting without the need for conversion kits Riello presents the New Family New stainless steel heat exchanger Riello has always designed its products with care and dedication. Continuous improvement leads today to the evolution of the Family condensing range, starting from its primary element: the exchanger. The new Family exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. Access remains from the front, to facilitate maintenance operations. Riello has also optimized the DHW exchanger by adopting the most advanced fluid-thermodynamic analysis and simulation techniques to obtain the best performance and maximum comfort for the user in terms of waiting times and temperature stability during sampling, compared to a boiler traditional MAXIMUM POSSIBLE LOAD PROFILE IN RELATION TO THE TYPE AND POWER OF THE GENERATOR, UP TO XXL IN THE CASE OF 35 KW FAMILY. SANITARY ENERGY EFFICIENCY CLASS A, THE MAXIMUM VALUE CURRENTLY PROVIDED BY EU REGULATION 811/2013 FOR COMBINED GENERATORS (TRADITIONAL BOILER CLASS B). REDUCTION OF GAS CONSUMPTION COMPARED WITH A TRA ADTIONAL BOILER BY APPROXIMATELY 10%, ACCORDING TO EN13203-2. ALMOST NULL WAITING TIME FOR HOT WATER (< 1 SECOND) WITH DOMESTIC HOT WATER PRE-HEATING FUNCTION ACTIVE (TRADITIONAL BOILER ABOUT 40 SECONDS). Emissions always under control The new Family is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionization electrode. Thanks to the ACC, the Family is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Family also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the air/gas mixture to always keep it within the optimal parameters. The ACC system also simplifies installation. In the ignition phase, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. Control panel and functions Even clearer, more intuitive and easier to use, it integrates elegantly into the aesthetics of the machine. The large backlit display, the raised keys and the interface enriched with explanatory texts and icons help the user and the installer in navigation. Through the panel it is possible to view the operating status, carry out the programming and access the regulation of the boiler and system. The Family display is equipped with the new "Color Bar" which informs the user at a glance on the operating status of the boiler. In the event of anomalies, it is possible to immediately understand if a problem is critical and whether to request the intervention of technical assistance. GREEN Regular operation. The system is satisfying domestic hot water/heating requests or carrying out other automatic operations. A scrolling text at the bottom describes the function active at that moment. RED Presence of blocking anomalies that require an intervention by the Technical Assistance. An error triangle on the display gives access to the details of the anomaly. YELLOW Presence of anomalies that can potentially be solved by the user which allow even partial operation of the product. An error triangle on the display gives access to the details of the anomaly. GRAY The system is ready to serve any requests. No operation in progress and anomaly detected. RiCloud - Comfort at your fingertips The RiCLOUD intelligent remote control allows you to manage the comfort of your home in a simple and intuitive way, even when you are away from home. Through the dedicated app it is in fact possible to check the status of the heating system, but also to program the switching on and off, temperature and operating times of the boiler directly from your smartphone or tablet. It is possible to manage up to 8 different zones, each controlled by its own RiCLOUD. RiCLOUD can also be installed in total wireless mode using a radio frequency receiver, available as an accessory, thus avoiding any electrical or masonry intervention. Many needs, one solution INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment . OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the standard antifreeze function down to -0 °C , without additional heaters. BUILT- IN Inside a built-in box or wall unit, thanks to its compact dimensions (25 kW model). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO FAMILY CONDENS 3.5 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP 2015: Family Condens is a technologically advanced wall-mounted boiler that combines the best comfort, energy savings and respect for the environment. Technical specifications Product code:ÿ20021506ÿ Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXL Class A Characteristics of heating/sanitary exercises: Fireplace thermal power (heating)ÿmin-max: 3.5ú35.0ÿkW Useful thermal power (sanitary) min-max: 3.5ú35.0ÿkW Energy efficiency(92/42/CEE)ÿ**** Efficiency at Pn* (50øC-30øC): 105.5% Profitability 30% (47ø return): 108% Sealed chamber, forced draft Quantity of hot water at t 25øC: 20 l/min Minimum domestic water flow rate: 2ÿl/min Dimensions (hxwxd) mmÿ845 x 453 x 358ÿ; 44 kgs Electrical protection degrees: IP X5D NOx class: 5 Power supply: LPGÿ Features list FAMILY CONDENS Efficiency****ÿ Low polluting emissionsÿ Aluminum condenser, with premix burnerÿ Models for combined instantaneous and storage heating For indoor and outdoor recessed installations Family Condens a wall-mounted boiler that combines comfort, energy saving and respect for the environment with the best. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber (models 2.5 and 3.0) guarantees better efficiency and duration. Family Condens available with powers from 2.8 to 35 kW. Features:ÿ Modulation ratio 1:10 (minimum power 2.8 kW) which allows the boiler to respond to all heat requestsÿ Modulating circulator, low consumption(IEE0,20)ÿ 3 Stars in sanitary comfort according to EN 13203ÿ Remote alarm system which allows remote signaling of the boiler lockout statusÿ Special Family functions: Wellness Tast, Memory Tast, Touch&Go function, Intelligent system fillsÿ Assembly template, hydraulic fittings and electric power cable suppliedÿ LPG conversion kit (G31) supplied for 3.5ÿ models Standard external probe ÿInstallation Benefits Performance secondDir. 92/42/EEC. Circulator lowconsum(IEE0,20) Climatic adjustment managed directly by the boiler control unitÿ Special Family functions: TastBenessere, TastMemory, Touch&Go function Smart Fillsÿ Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products ErP the acronym for Energy related Products? (products connected to the use of energy) and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design (or eco-design?). The scope of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The regulations issued require that all products intended for heating and/for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an ÿenergy labelÿ that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as well as those on air conditioners, the efficiency data reported for the average climatic zone. In addition to product energy labels, European regulations have also provided for the creation of a "system label" in the case of building a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will allow the creation of systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); but this faculty is also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less