Technical features NB: In the absence of the product, the new VMI 30 model will be shipped ErP energy class (Heating and DHW): class A Sanitary load profile - XL For heating and domestic hot water production Forced draft sealed chamber Nominal thermal power in sanitary kW 30 DHW nominal heat input kW 30.6 Performance stars (according to Dir. 92/42CEE) - **** Consumption at nominal power Natural gas m3 /h 3.2 Expansion vessel capacity 10 l Maximum water content in the system l 180 Storage tank setting temperature °C 35 - 65 Boiler nominal volume l 20 Minimum water flow l/min 1.5 Hot water withdrawal capacity (ΔT = 30K) l/10min 180 Domestic hot water comfort stars (prEN 13203) - *** Dimensions (hxpxl) mm 720x553x440; 57kg Power supply V/Hz 230/50 Total electric power W 100 Sound power dBA 50 IP degree of protection IP X4 D NOx class - 5 Version: CNG (0010019530) To view more product information CLICK HERE General characteristics Vaillant condensing boiler  With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year.    ecoTEC PLUS with boiler   Little space and a large family? ecoTEC plus with built-in wall-mounted boiler is the boiler designed to satisfy a high demand for hot water when spaces do not allow for the installation of external boilers.   The VMW ecoTEC plus with actoSTOR CL 20 S integrable storage tank are available in power ratings of: 30 and 34 kW. This stratification boiler is a real hot water reserve that can be installed very easily and quickly directly between the wall and the boiler. An exceptional solution that ensures the quantity of water needed is always available and without sudden changes in temperature. The boiler system with storage tank is very simple to assemble: first install the actoSTOR CL wall-mounted storage tank and the related pipes supplied for domestic water, then hang the ecoTEC plus VMW wall-mounted boiler on the storage tank. The dimensions are very small 70cm high, 44cm wide and 55cm deep. The stratification storage tank guarantees the same performance as a storage tank with a 60-litre coil but with considerably reduced spaces. The combination with ecoTEC plus allows you to exclude the storage tank functionality by making the boiler work instantaneously; this allows a considerable saving on gas consumption. New electronics and a very high efficiency pump make ecoTEC plus the wall-mounted condensing boiler that consumes less on the European market. ecoTEC plus is compatible with all Vaillant components and accessories already on the market. The new design is simple and intuitive.   Characteristics: Boiler ready for 2015 regulations ErP: class A Boiler with integrable storage tank Power modulation 1:8 10l expansion vessel High efficiency modulating pump (class A) Primary heat exchanger in steel High efficiency in the production of hot water up to 199 liters in the first 10' High DHW comfort Compact stratification storage **** Heating efficiency ELGA combustion system Ecodesign Directive (ErP) 2015 How to be ready for new EU legislation   What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed.   ErP and ELD: what do they mean and how are they different?  ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: - Category 1 Includes space heating appliances: electric, gas, oil, combined boilers, heat pumps and cogenerators up to 400 kW. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres.  ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label.  Let's take a look at the new labels...        When and how will the new rules apply? On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products     Why push condensing technology right away?   For the energy requalification of individual homes, the 2007 Budget Law was extended until 31 December 2015. The request for a 65% tax deduction concerns, for example, the replacement of a traditional boiler with a condensing boiler.     What will Vaillant support be?   7 year guarantee   The 7-year guarantee on new boilers is another excellent reason to offer Vaillant to your customers. In addition, know that by replacing a Vaillant boiler over 15 years old with a new generation one, the warranty extension will be provided free of charge by the Vaillant Official Technical Assistance Center against a maintenance contract. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Overview SAVIO evoDENS E 35S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG FUME EXHAUST LPG - NEW ErP;ÿMedium range stainless steel condensing boiler Technical specifications Model:ÿevoDENS Product codeÿLPG: 103041002300 Product codeÿLPG: 103141003300 Characteristics of heating/sanitary exercises: Heating/DHW nominal heat inputÿ30.0 / 34.0 Heating/DHW minimum heat inputÿ8.5 Yield name 60ø/80øC %ÿ98.2 Yield min. 60ø/80øC %ÿ97.6 Rendimental 30% at 30øC:ÿ102.1 Energy efficiencynøÿ Minimum / maximum heating temperature**øC 25 / 85 Minimum / maximum heating pressurebar 0.3 / 3.0 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Sanitary minimum / maximum temperatureøCÿ35 / 55 Sanitary minimum / maximum pressurebarÿ0.3 / 10.0 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ21.6 / 15.6 Voltage / Power at nominal heat input V ~ /W 230 ~ / 114 Power at minimum thermal capacity W 10 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxD:ÿ700x400x290 mm; 37.0 kgs Boiler water content 2.5 l Main features evoDENS The new Savidi range of high efficiency wall mounted boilers dedicated to residential buildings. A complete range of powers, 24, 28 and 32 kW, for heating and the production of domestic hot water, inÿextremely compact dimensionsÿ (700 x 400 x 325 mm) makes Evodens a product suitable for different comfort needs.ÿEvodensÿe endowed with an aesthetic innovativeÿand a newÿimmediate and simpleÿto use interface. New functions make ÿEvodens an integral part of a system and facilitate its installation. Exchangers: Primary heat exchanger in copper, high circulation lamellar. Sanitary heat exchanger in stainless steel plates digital control panel:ÿInnovative digital control panel with graphical interface and buttons Ecodesign Directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX ZEUS SUPERIOR 32 KW LPG CONDENSING BOILER WITH BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 32.0 kW; DHW power: 25.8 kW; Hot water production (∆t 30 °C) l/min: 19.2; Nominal Current: 0.64A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 10.0/7.1 L; Head available with flow rate 1000 l/h kPa (m wc) 29.0 (2.95); Healthcare services: Useful thermal power for hot water production (kcal/h) 32.0 (27520) kW; DHW temperature °C 20 - 60: Sanitary pressure 2.5 bar: Withdrawal in continuous service (∆t 30°C) litres/min 15.8; Specific flow rate x 10 min. (∆t 30°C) litres/min 19.2; Boiler losses kW 0.168; Nominal expansion vessel capacity liters 2.5 (1.2) Power supply: LPG. Benefits and functions: Display: backlit liquid crystal, provides the main operating information; It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings and whirlpool tubs, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 54-litre boiler made of stainless steel to be unalterable over time with minimal heat loss so as to resist even outdoors. The wide flange optimizes cleaning and maintenance operations, which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. Inside the boiler, in turn, there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 900x600x460cm; Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

Biasi ac condensing boiler complete with LPG Low NOx ErP Fume Exhaust Kit - NEW Model BASIC COND 30S DHW nominal heat input kW (kcal/h) 31.0 (26655) Nominal heat input * heating kW (kcal/h) 26.0 (22356) Maximum useful power in heating 60/80° kW (kcal/h) 25.4 (1840) Useful power in domestic hot water 60/80° kW (kcal/h) ) 30.3 (26053) Efficiency at 100% load (50/30 °C) % 107.3 Sanitary flow rate ?t =25°K l/min 17.6 NOx class 6 LPG code 10304.2029.0 Dimensions HxWxD mm 703x400x325 BASIC COND Basica Cond Basica Cond completes the BIASI range with premixed condensing: perfect for radiator systems and suitable for radiant systems with mixing groups. Basica is the compact condensing boiler that ensures high efficiency, low consumption and respect for the environment. Available for heating and domestic hot water production, in power ratings of 25 and 30 kW. Main features Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion - Total premix burner, stainless steel (Class NOx 6) - Modulation 1:5 CNG and also LPG - Sanitary plate heat exchanger in stainless steel - 8 liter expansion vessel - High efficiency pump with low energy consumption - Can be installed in a partially protected place - Integration with BIASI solar systems, using a solar kit - Analog pressure reading - Arrangement for remote control and external probe High circulation single coil primary heat exchanger Biasi introduces on the market the new stainless steel heat exchanger for condensing boilers: Round. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single strip of stainless steel to produce the coil, including inlet/outlet fittings, the following benefits are achieved: - The accumulation of dirt and debris is avoided - The water flow rate is constant, guaranteeing a higher average life of the product - Reduction of load losses with optimized circuit. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Included in delivery Boiler support bracket and paper template Boiler power cable Condensate collection siphon Quick instruction to the user. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history The display operates in the following modes: INFO – information available on the operating status and error history FREE programming – programmable parameters for generator/system adjustment and User SET INSTALLER programming - generator parameters ASSISTANCE programming - Authorized Assistance Center parameters commands The Basica Cond Range has the choice of 2 class V remote controls (they allow deduction at 65), in the Base and Top version with weekly chronothermostat functions with up to 4 programmable periods with independent temperatures, in addition to the remote control of all the information of the boiler display. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Model : EXCLUSIVE X 25C CNG item code: 20187794 Nominal Power : 20 kW Heating efficiency class: A Sanitary Efficiency Class: A Seasonal Heating Energy Efficiency : 93% Seasonal ACS Energy Efficiency : 86% Auxiliary Electricity Consumption In Standby mode: 3 W At partial load : 13 W Full Load: 27W Technical specifications Heating thermal capacity: 3.6 ~ 20 kW DHW heat output : 3.6 ~ 25 kW Nominal thermal power (80°/60°) : 19.5 kW Nominal thermal power (50°/30°) : 21.32 kW Power supply (V,Hz, Ø) : 220~240/50/1 NOx class : 6 Degree of protection : IP X5D Declared load profile : XL Heating Maximum pressure : 3 bars Temperature : 90°C Membrane expansion tank : 9 l Sanitary Maximum pressure : 8 bars DHW production : 10.8 ~ 15.1 l/min Minimum DHW flow rate : 2 l/min Installation data Heating Inlet-Outlet / Gas Inlet Pipe Diameter: 19.05 mm (3/4") DHW outlet diameter / Boiler flow-return: 12.70 mm (1/2") Maximum length for coaxial outlet (Ø 60-100 mm): 10 m Maximum length for split outlet (Ø 80+80 mm): 60 + 60 m Dimensions and weight Boiler dimensions (HxPxL): 740x275x420 mm Boiler weight: 35 Kg Condensing boiler Beretta Excusive X Technology for a green lifestyle From the R&D laboratories of Beretta comes EXCLUSIVE X , the new condensing boiler that marks a further step in the evolution of the EXCLUSIVE range , whose name has always characterized the top of the brand's wall-mounted offer Combustion and electronics, which represent the heart and brain of the boiler, have been completely redesigned to offer an even more performing product that meets European environmental sustainability objectives EXCLUSIVE X is the ideal choice for those who are not satisfied and are looking for green solutions Exclusive Innovation The new stainless steel exchanger , the innovative electronics with hybrid function integrated in the boiler , without external remote controls, and the ability to process mixtures of natural gas and hydrogen up to 20% give EXCLUSIVE X a highly technological profile, ensuring maximum energy saving, which translates into an economic advantage for the user Exclusive Performances EXCLUSIVE X represents the spearhead of the Beretta offer. Thanks to the new optimized plate exchanger, the range achieves sanitary performance at the top of the category in terms of efficiency, temperature stability and waiting times. The refined ACC electronic combustion system, which allows for continuous modulation of the quantity of fuel delivered, offers "first-class" efficiency and functionality in all circumstances, reducing harmful emissions to a minimum. Exclusive Beretta The new range represents the synthesis of Beretta's advanced research, in continuity of style with the best tradition of the brand . Continuity that manifests itself both in the aesthetics of the product, which takes up the lines of the first Beretta boiler models, reinterpreting them in a modern key, and in the simplicity of use and installation flexibility , among the distinctive features of the brand, which have always been appreciated by the market Technology for Maximum Efficiency A New Heart of Steel EXCLUSIVE X is equipped with a new primary exchanger in stainless steel, with a smooth tube with a large section , to ensure the best efficiency and cleanliness over time. In addition to the high resistance to the corrosive action of acid condensate , stainless steel prevents the internal formation of oxides and other electrochemical phenomena typical of installation on old systems. The single wrapped coil geometry (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents clogging phenomena. The front access facilitates periodic maintenance and cleaning of the combustion chamber Electronic Injection Combustion ACC Combustion The ACC system, refined by Beretta for the EXCLUSIVE X, allows in all circumstances to offer functionality, efficiency and low emissions that are "first in class". Using a sensor for detecting the flame ionisation current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the entire modulation range of the delivered power (value of constant CO2 ). Thanks to the sophisticated ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded Advantages of the ACC System Self-adaptation of the system to the type and composition of the gas. Gas conversion kits no longer needed. No Mechanical Calibration or manual interventions on combustion to be carried out on the boiler Maintaining the stoichiometric ratio Constant Air-Gas ratio under any circumstances Continuous Control of Emissions in compliance with operating limits Gas savings maximized compared to traditional systems. Thanks to the constant maintenance of the efficiency at the modulation of the power Self-learning Optimized efficiency and reliability over time, thanks to self-learning with compensation by the ACC system Innovative air filter that prevents the entry of impurities from the air drawn into the burner and exchanger, which can compromise the efficiency of the boiler, also facilitating maintenance. The filter also helps to reduce the noise emissions of the boiler in operation Lower connection cover available as an option for the 25 C and 25 R models, to improve the aesthetic impact and facilitate the integration of filters and accessories New color system display EXCLUSIVE X is equipped with a new advanced interface, which constitutes the intelligence of the boiler's hybrid system . In fact, the new range was born HYBRID READY, i.e. with the possibility of directly managing multi-energy systems, through the boiler interface, without external remote controls. Elegantly covered by a flap with the Beretta logo, the new interface features a backlit color LCD display which communicates with users and/or installers using texts and icons. Using 4 keys it is possible to navigate the display in a simple and intuitive way , accessing all the settings and parameterizations of the boiler and the system. The advanced self-diagnostics , together with the EXCLUSIVE X functions that can be activated from the interface, complete its innovative profile Hourly Programming Programmable heating by hour and by single zone Intelligent System Filling Activation of filling in autonomy and total safety System pressure Displayed Now also display as a screensaver Preheating Domestic hot water preheating activation Scheduled Maintenance Intelligent system that warns the user when boiler maintenance is scheduled The Efficient choice of Hybrid Ready Energies The range was created as a fundamental element of the offer of HYBRID READY products, which make up the hybrid technology system conceived and developed in the Beretta Research Laboratories . This system, created to meet the current and future needs of integration and governance of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. EXCLUSIVE X was born with the system intelligence integrated in the boiler , REC 10CH, a real thinking brain that constantly governs and controls the hybrid system created, to always offer the best comfort in an efficient and effective way. The Beretta Hybrid, standing out for its modular approach to the world of multi-energies, is able to evolve over time, with the introduction of new components that increase its overall efficiency Exclusive X See the Future EXCLUSIVE X was born today, designed for the generations of tomorrow. The new range is already set up to operate with mixtures of natural gas and hydrogen - up to a maximum of 20% - in line with the objectives of environmental sustainability and the decarbonisation process launched by the European Union Hydrogen is the sustainable energy source of the future Availability in huge quantities Producibility using low-impact methods and in a sustainable way from renewable sources, such as wind energy, photovoltaics and biomass Reduction of polluting emissions in the percentage relative to its use Real opportunity for change to start the decarbonization process, fight global climate change, improve air and life quality Use cycle of hydrogen Hydrogen is a safe and clean gas, present and available in enormous quantities even in nature. Mixed with natural gas up to a maximum ratio of 20 to 80%, hydrogen makes it possible to generate heat and domestic hot water , helping to minimize polluting emissions. From the combustion of oxygen and hydrogen, and in the quantity of the latter used, water vapor is generated: hydrogen is returned to its most common source of origin, water, and reintroduced into nature Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

  Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Seasonal heating efficiency % 94       Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 20/25 kW Heating nominal heat output: 19.64 kW Efficiency at rated power: 98.2% Efficiency at reduced load (30%): 103.4% Max electric power heating Watt 80 Electrical protection degree IP X5D Expansion vessel capacity 8 litres Quantity of hot water with Δt=25°C: 14 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 780x400x365 ; 38kg METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Mynute Green E - ErP   System energy class A+ (in combination with external probe and Rec 08 remote panel) Heating energy class A Energy class of the sanitary A New condensing exchanger Modulation 1:5 Flex low consumption circulator (IEE≤0.20) Ducting with flue Ø 50 mm  The new Mynute Green E range is designed following the ecodesign indications provided for by the European ErP Directive and is made up of two combined models and a heating only model. The combined versions have a thermal capacity of 20-25 kW and 25-30 kW, values ​​which refer respectively to heating and DHW; similarly, the heating only version has a thermal capacity of 25-30 kW. The range offers as standard the new front access condensing exchanger with improved efficiency (94% seasonal efficiency), the low consumption modulating circulator, the predisposition for the clapet kit (optional) to be used for pressurized flues and the high pressure fan. prevalence to be able to carry out the ducting of flues with Ø 60 or Ø 50 exhausts. Mynute Green E: high energy efficiency, low gas consumption and low emissions. The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries. The new Beretta condenser exchanger with front access The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%. Mynute Green E, the elegant The new Mynute Green E is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to easily select all the functions necessary for using and setting the boiler. Flex modulating circulators: optimized performance, low consumption Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature. Up to 49 meters of ducting With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. Characteristics: MYNUTE GREEN E + external probe + REC 08 remote control forms a class A+ system Designed according to the ecodesign indications provided for by the European ErP Directive Energy Class > heating (class A) > DHW profile XL (class A) Seasonal heating efficiency 94% Low polluting emissions: class 5 (UNI EN 483) New high-flow aluminum condensing exchanger with front access Standard thermoregulation (optional external probe) ErP boilers with low consumption modulating circulator (EEI0.20) modifiable up to 7m head Hydraulic connections cover (optional) Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP (only ErP boilers) Template, plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ARISTON GENUS PREMIUM EVO EXT 25 EU CONDENSING BOILER COMPLETE WITH LPG- ErP FUME KIT Technical features Product code: 3300735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.6 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 70 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/505/240 Extremely small dimensions to adapt to any space problem. LPG power supply Ariston condensing boilers Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Genus Premium Evo EXT Genus Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). High efficiency product with reduced consumption thanks to the 1:10 modulation ratio and the high efficiency circulator with continuous modulation. characteristics: Wall mounted condensing boiler for outdoors with auto function Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Electro-galvanized casing for outdoors Possibility of outdoor installation thanks to all weather protection systems. Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Semi-automatic filling Anti-freeze, anti-limescale and anti-blocking circulator protection Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

RIELLO FAMILY AR 35 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical features Product code: 20100513 Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Furnace thermal power (heating) min-max: 9.9÷34.8 kW Useful heat output (sanitary) min-max: 9.9÷34.8 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 97.5% Profit return 30% (47th return): 96.5% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 20 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 845 x 500 x 332 ; 48 kgs Electrical protection degree: IP X5D NOx class: 2 Power supply: METHANE FAMILY AR Yield **** Combined models for heating and domestic hot water production Family AR is the new generation condensing boiler specifically designed to operate with high temperatures (80°C delivery and 60°C return) and therefore in radiator systems. Family AR contains Altaresa condensing technology in the aesthetics and in the special Family functions. Family AR has an Air/Gas combustion (patented): thanks to the modulating fan, the mixture of air and gas is kept optimal and constant over the entire power range, always maintaining high efficiency. Thanks to the treated aluminum post-exchanger, very high yields up to 102.9% are obtained. The climatic regulation is managed directly by the boiler control unit, via the external probe (accessory), it allows the temperature of the heating system to be suitably adapted to the external climatic conditions. The equipment is completed by anti-freeze systems (down to -3°C), circulator anti-blocking systems, three-way valve, Wellness button and rapid button which reduces the waiting times for domestic hot water. Family AR is available with powers of 25, 29 and 35 kW. Characteristics: Technology, ease of control and management: • Memory key: activates machine intelligence. - sanitary: hot water always ready and without waste, according to the usage habits of the family. - in heating: reduction of home heating times. • Wellness key: maintains hot water delivery at the ideal temperature for the shower (40°C customizable +/- 5°C). • Touch&Go function: directly from the tap, it activates pre-heating for just one water draw. • Intelligent system filling: allows you to fill the system in complete autonomy. Air/gas combustion (patented): optimal mixture of gas and air to obtain high and constant efficiency over the entire power range with efficiency up to 102.9%. Condensing exchanger located downstream of the fan for further recovery of the heat contained in the exhaust fumes. Advantages for installation: Efficiency ★★★★ according to Dir. 92/42/EEC. Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Special Family functions: Wellness key, Memory key, Touch&Go function Intelligent system filling Assembly template, hydraulic fittings, power supply cable supplied. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

  Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input 25 kW Nominal thermal power 24.38 kW Performance certification ★ ★ ★ ★ (Directive 92/42/EEC) Useful efficiency (80-60 °C): 97.5% Useful efficiency (50-30 °C): 104.8% Electric Power: 125W Expansion tank capacity: 9 lt Quantity of hot water with Δt=25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Sanitary water temperature selection range: 35 - 60°C Dimensions (hxlxp) mm 846x400x365; 39kg Power supply: METHANE Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Paros Green The new Paros Green range offers high standards in terms of technology and standard equipment:  1:8 modulation ErP boilers with low consumption modulating pump (EEI≤0.20) modifiable up to 7m head The RANGE RATED certification makes it possible to adjust the heat input of the boiler to the effective heat requirement of the system Low polluting emissions: class 5 according to UNI EN 483 Patented condensing exchanger (Patent Pending) high capacity aluminum Maximum Sanitary Comfort ★★★ required by Pr EN 13203 Efficiency ★★★★ according to European Directive EEC 92/42 Expansion tank 9 liters (mod.25 kW)/10 liters (mod.30 kW) Thermoregulation with standard external probe Standard hydraulic fitting cover For LPG gas conversion, contact the Assistance Centres Authorized Beretta technique  Condensing exchanger The innovative condensing exchanger and the production process have allowed Beretta to file an application for a European Patent (Patent Pending). The exchanger is born in a single aluminum tube and without welding. The high thermal conductivity of the aluminum allows for a more uniform distribution of the temperature so as not to create overheating points for the benefit of a longer life of the exchanger. In addition, aluminum offers a high resistance to corrosion. The single pipe architecture (series circuit) allows obtaining a large section for the passage of water in the exchanger with the advantage of having low pressure drops and preventing both the deposit of limescale and impurities.  1:8 modulation The range offers a wide range of modulation to respond to real energy needs, while simultaneously offering a high reduction in consumption. Beretta realizes this system through a totally pneumatic and therefore safe and reliable model. The electronics in fact act only on the number of revolutions of the fan (inlet air flow rate) without intervening on the injection of the gas quantity which is automatically aspirated. Beretta therefore introduces a new double distribution mixer: a mechanical damper with a calibrated weight which opens or closes a part of the venturi section so as to divide the modulation range into two stages (smaller section with low air flow or larger with high air flow rates). Beretta has also developed a specific silencer in the air intake to reduce any resonances generated by the new mixer.   Range Rated The term Range Rated identifies a product approved for different heat input levels and equipped with a device that allows you to adjust the heat input of the boiler according to energy requirements. In summary, Beretta is able to offer a boiler that responds to the request of the project through a simple calibration to be carried out during installation. In fact, it is sufficient to adjust the number of revolutions of the fan. There new heat capacity will be shown on a special plate on the machine.  The control panel The New Paros Green are equipped with a simple and intuitive control panel. Two ergonomic knobs allow you to perform all the functions necessary for using the boiler. The selectors also allow activation of the Friendly Climate System and the Comfort Water System. Thanks to the display and the LEDs on the dashboard, information on the status of the appliance is immediately usable. Finally, filling the system with the practical tap can be checked using the hydrometer on the panel.  Comfort Water System The New Paros Green CSI is designed to offer high comfort in the use of domestic hot water. The user has in fact the possibility of activating the Comfort Water System (indicated by the lighting of the yellow LED) using the appropriate selector. i.e. pre-heating. The Comfort Water System allows for greater speed in the delivery of domestic hot water, reducing waiting times. The advanced electronic control, the adoption of the fuximeter and the increased sanitary exchanger, allow the New Paros Green CSI to reach the ★★★ in sanitary comfort: the maximum foreseen by the Pr EN 13203.   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Unical KONe C35 Low NOx condensing boiler complete with flue kit - NEW ErP Model: KONe 35C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power: 33.8kW Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 18.2kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87.5% Useful power at 30% of rated thermal power in low temperature regime (Tr 30 °C): 6.1 kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 97.5% Annual electricity consumption QHE GJ: 56 Heating energy efficiency. of water ηWH: 85% Daily fuel consumption Qfuel : 23.13 kWh Sound power level indoors Lwa db(A) 55.2 Annual electricity consumption AEC: 402 kWh Specific sanitary water flow rate (Dt 30 °C): 16 l/min DHW production in cont. Dt 25 K (mixed): 18.3 l/min Expansion vessel capacity: 10 l Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345 mm; 37kg KONe KONe is a wall-hung condensing boiler with very low polluting emissions, thus falling within the new Class 6, the most restrictive currently in force. It is available in instant combined version. KONe has all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) ηs 93% (EU regulation 813/2013 - dir. ERP 2009/125/CE) Energy class A Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx class 6 (according to EN 15502-1) thanks to the fully electronic modulating premix burner with constant combustion ratio (both gas valve and fan) Production of hot water up to 13.3 l/min Dt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) exchanger in AISI 316L stainless steel "Pit stop" maintenance for technical assistance interventions "Soft touch" control panel with "Upgradable" protective closure via USB connection for diagnostics/programming with computer or dedicated handheld tool High efficiency modulating circulator HWS "Hot Water Speed" is the special KONe electronics that switches from heating to DHW function with burner and pump always active, improving user comfort who does not have to wait for hot water Management of 2 zones with 2 thermostats (modulating/on -off) thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) Sliding temperature programmed to operate with the lowest possible delivery temperature to help save energy Anti-overheating post-circulation automatically after the burner goes out, the boiler keeps the pump running for 5 minutes, preserving the components Chimney sweep function allows maintenance technicians to carry out the checks required by current standards in terms of efficiency and emissions Pump anti-blocking the blocking of the pump following long stops is avoided thanks to an automatic impulse of 5 sec. Everything like in a “Sim Card” All the operating characteristics of the boiler are memorized inside a SIM. The Unical Assistance Center is equipped with a handheld instrument with a 3" touchscreen that can be connected directly to KONe to develop the monitoring activity by speeding up the intervention times for solving any problems: data acquisition for a computer analysis monitoring in real-time of the operating parameters even remotely (from the office or from the PDA) management of the "faults-history" “Pit stop” maintenance in less than 2 minutes KONe is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START AQUA CONDENS 25 BIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW Erp: Start Aqua Condens a wall mounted boiler with a 45 liter stainless steel boiler. Technical features Technical specifications : Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Heating rated heat output (80ø/60ø): ÿ24.50 kW Heating nominal heat output (50ø/30ø): ÿ26.25 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: ÿ25 kW Energy efficiency (92/42/EEC) ÿ**** Useful efficiency Pn (50ø/30ø): ÿ105% - 108% Useful efficiency 30% (47ø return): 107.1% Sealed chamber, forced draught Quantity of hot water with t 30øC: 141 *** Quantity of water drawn (litres) in 10' with ǽÓ??ÿT = 30øC Dimensions (hxlxp) mm 1005 x 450 x 600 ; 66 kgs Electrical protection degree: IP X5D NOx class: 5 PRODUCT CODE: 20100125 Power supply: LPG General characteristics START AQUA CONDENSING INTERNAL Combined model with 45 liter stainless steel storage tank. Start Aqua Condens is a wall mounted boiler with a 45 liter stainless steel boiler. The Riello heat exchanger made entirely of aluminum guarantees efficiency and durability, high head and reduction of polluting emissions. It is available with 25 kW power. Certification or Range Rated which makes it possible to adjust the nominal power of the boiler to the effective heat requirement of the system. Three speed circulator. Standard thermoregulation on the card in combination with the external probe (optional). Assembly template, hydraulic fittings, power supply cable supplied. Operation on methane as standard with the possibility of conversion to LPG (G31) (accessory), this modification to be carried out by the installer of the technical assistance service. ErP: Energy related Products The new European regulations for heat generators   ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.   In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.   This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features ErP energy efficiency class (heating and DHW): A Load profile: XXL DHW nominal heat input kW 34 Heating nominal heat input kW 28.9 Sanitary nominal thermal power kW 33 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.6% Efficiency at 100% Pn (50-30°C): 105.4% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 18.9 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 760 x 450 x 345 mm ; 39.5 kgs Power supply: CNG or LPG *Operation on LPG through adjustment by the Authorized Assistance Centre Moon Platinum+ Wall mounted condensing gas boilers for heating only and instant DHW production. Ecodesign and Labeling - From Baxi research comes a complete range of condensing boilers with high technological content designed in compliance with the requirements of the Ecodesign and Labeling directives, to ensure maximum domestic comfort. Latest generation electronics, high efficiency and compact design make the Platinum+ range the ideal solution for both new installations and replacement. THINK raises system efficiency - The Platinum+ range of boilers is designed with the Think technology platform - intelligence within, an exclusive system that makes them "think" intelligently! With this authentic "the brain inside the box", the Baxi proposal confirms itself as the intelligent choice for making the boiler communicate in a simple and flexible way with all the main heating technologies, creating increasingly complex and energy-efficient design solutions. Furthermore, the Think platform makes the boiler very easy to use, in line with the Baxi design tradition aimed at totally user-friendly management of the appliance. Even the least experienced user can thus interact with the new control panel and program his own domestic comfort with the utmost simplicity. With the range of condensing boilers with the Think platform, Baxi comfort is easy and smart. The combination of the Platinum+ boiler for heating and DHW production and THINK controls for intelligent management of the system allows efficiency to be raised to class A+. The Platinum+ range is equipped AS STANDARD with a removable control panel for remote management (wired or wireless) of the boiler, equipped with a large multifunction text display with modulating thermoregulation control unit functions. GAC - The innovative automatic combustion control system GAC (Gas Adaptive Control) guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adapt the thermal power produced to the effective power dissipated by the building avoiding excessive overheating/cooling of the building. Efficiency and savings - The objective of a heat generator is to supply the energy necessary to the rooms to maintain maximum comfort conditions inside: this means supplying the rooms, through the system, with the same amount of heat the building disperses. In new buildings, the regulations increasingly require greater insulation and consequently less dispersion. Usually there is a tendency to oversize heat generators to favor the production of sanitary water: this leads to an excess of power in heating which, together with the poor modulation capacity of traditional boilers, causes discontinuous functioning and therefore waste of fuel. Discontinuous processes generate energy losses (heat dispersion caused by the pre-washing of the combustion chamber, component wear caused by continuous on-off, decrease in generator efficiency). The modulation system of the Platinum+ range is able to adapt the thermal power produced to the effective power dissipated by the building, avoiding excessive overheating/cooling of the rooms. Total modulation pump The Luna Platinum+ range is renewed with the introduction of a high efficiency electronic pump with permanent magnet motor. The new fully modulated pump allows, compared to using a pump traditional modulating: Lower electricity consumption Better performance Greater durability Plant deaeration New electronic "system deaeration" function to facilitate the removal of air during initial ignition. Efficiency and savings The objective of a heat generator is to supply the energy necessary to the rooms to maintain conditions of maximum comfort inside them: this means supplying the rooms, through the system, with the same amount of heat that the building loses . In new buildings, the regulations increasingly require greater insulation and consequently less dispersion. Usually there is a tendency to oversize heat generators to favor the production of sanitary water: this leads to an excess of power in heating which, together with the poor modulation capacity of traditional boilers, causes discontinuous functioning and therefore waste of fuel. Discontinuous processes generate energy losses (heat dispersion caused by the pre-washing of the combustion chamber, component wear caused by continuous on-off, decrease in generator efficiency). The modulation system of the Platinum+ range is able to adapt the thermal power produced to the effective power dissipated by the building, avoiding excessive overheating/cooling of the rooms. The graph shown above highlights the reduction in on/off cycles which distinguishes the new Platinum+ boilers with modulation up to 1:10 compared to a condensing boiler with lower modulation. The reduction of the on/offs determines an improvement in the efficiency of the boiler and consequently a considerable saving for the end user. Standard condensing boilers, on the other hand, with a limited modulation range work at a minimum power level above 6 kW; this allows it to avoid the on/off cycles for only 3% of the period of operation in heating, compromising the performance of the boiler and the life of the components. GAC : Gas Adaptive Control The electronics and the gas valve with stepper motor that the new Platinum+ boilers are equipped with guarantee automatic combustion control which is based on: on the flame signal The system continuously measures the flame signal during boiler operation and adjusts the gas flow rate so as to maintain the quality of combustion constant and all this without requiring any additional component inside the combustion chamber. Installers and end users enjoy the following benefits of the GAC: The automatic combustion control favors a reduction in installation times as no manual adjustment of the gas valve or nozzle change is required: in fact, it is sufficient to manually modify some parameters of the electronic board for operation with LPG The boiler self-adapts to the quality of the gas and the length of the flue gas outlets: this means that there are no manual adjustments to make High modulation field 1:10: high efficiency and savings, since such a wide modulation field determines a greater adaptability of the boiler to the thermal dispersions of the building to obtain a higher efficiency and greater durability of the components. The reduction of the on/off cycles, in addition to the greater efficiency, guarantees less noise produced by the boiler Unlike traditional condensing boilers, the boiler always works adjusted to maximum efficiency values ​​favoring a reduction in gas consumption and consequently a lower environmental impact thanks to the control of CO/CO2 emissions Power sets The term Power set identifies the heating power regulation process according to the project data. The thermal capacity of the boiler, through the Power set device, is adjusted according to the energy requirement: just act on the control panel to adjust some parameters. Complete soundproofing C structure Silence is the relative or absolute absence of sound or noise. The noise level of the Luna Platinum+ boiler is comparable to a normal conversation. Digital pressure gauge The electronic pressure transducer in the hydraulic unit allows you to check the pressure directly on the display. Double alarm level in the event of low pressure: a "warning" level in the event of low pressure in the boiler; a "block" level in the event of a lack of pressure. Intubation solution For the rehabilitation of flues Baxi has developed a system that allows easy ducting in existing flues thanks to a Ø50 mm exhaust pipe (for 24kW models) Characteristics: wide modulation range 1:10 greater efficiency and silence GAC (gas adaptive control): automatic combustion control high-efficiency circulation pump with total modulation removable and backlit control panel in wireless and wired version for wall installation, with large text display, adjustment knob and menu selection keys power set: heating power adjustment according to project data integrated electronic management for coupling to a solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW STANDARD installation kit (gas cock / DHW inlet / telescopic fittings) antifreeze function and IPX5D degree of protection Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less