The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 30 CS/1-5 Article code : 0010022022 Power supply: methane or LPG Performance Heating power : 3.5 ~ 30.0 kW DHW power : 3.5 ~ 30.0 kW Withdrawal flow rate (ΔT = 30K) : 14.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 108.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caratteristiche tecniche Modello : RinNova Adaptive FAST 30S Codice prodotto : 10314.2087.0 Alimentazione : Metano/gpl Classe di efficienza energetica : A Performance riscaldamento Portata termica nominale : 3,0 ~ 25,0 kW Potenza utile 60°/80° C : 2,9 ~ 24,6 kW Potenza utile 30°/50° C : 3,2 ~ 26,9 kW Temperatura minima e massima riscaldamento : 25° ~ 80° C Pressione massima riscaldamento : 3,0 bar Quantità di condensa a Q.nom. 30°/50°C : 0,5 ~ 4,8 l/h Performance sanitario Portata termica nominale : 3,0 ~ 30,0 kW Potenza utile 60°/80° C : 2,9 ~ 29,5 kW Potenza utile 30°/50° C : 3,2 ~ 32,3 kW Temperatura minima e massima sanitario : 35° ~ 55° C Pressione massima sanitario : 10,0 bar Quantità di condensa a Q.nom. 30°/50°C : 0,5 ~ 4,8 l/h Performance generali Rendimento minimo e nominale 60°/80°C : 95,1 ~ 98,4 % Rendimento minimo e nominale 30°/50°C : 105,6 ~ 107,7 % Rendimento energetico ηs : 94 % Classe NOx : 6 Capacità del vaso espansione : 10 l Portata massima (ΔT=25 K) : 17,6 l/min Portata massima (ΔT=35 K) : 12,3 l/min Portata sanitari specifica (ΔT=30 K) : 14,7 l/min Potenza alla portata termica minima : 52 W Grado di protezione : IPX5D Contenuto d’acqua della caldaia : 5,4 Kg Dimensioni e peso Dimensioni (AxLxP) : 800x400x385 mm Peso : 44,0 Kg RinNova Adaptive Fast 25S Caldaia a condensazione ad alto rendimento con microaccumulo RinNova Adaptive Fast è la nuova gamma BIASI di caldaie murali combinate a condensazione con scambiatore/microaccumulo.  Grazie alla linea moderna è facilmente installabile negli ambienti domestici ed è caratterizzata da un elevato comfort sanitario.L’esclusivo scambiatore sanitario, con microaccumulo da 4 litri assicura l’immediata erogazione di acqua calda, anche in caso di prelievi minimi ed una elevata stabilità della temperatura.L’innovativo sistema elettronico che gestisce la combustione, è in grado di adattarsi in autonomia alle differenti tipologie di gas, garantendo sempre una combustione efficiente e sicura. Gestione remota della temperatura Il comfort è a portata di mano Grazie all’App Biasi Connect è possibile gestire la caldaia da remoto. Per utilizzarla è necessario disporre del KIT Biasi Connect in aggiunta al comando remoto evoluto. Il comando evoluto consente di modulare la temperatura di mandata dell’acqua dell’impianto in funzione della temperatura ambiente e della temperatura esterna Quali sono i vantaggi? Riduzione dei consumi, risparmio energetico ed estrema flessibilità: la regolazione è flessibile in base alle proprie esigenze ed abitudini giornaliere. Si può inoltre regolare con un click la temperatura dell’acqua calda sanitaria Consapevolezza del proprio impianto: si può sempre vigilare in tempo reale sul corretto funzionamento del generatore di calore Sicurezza: Si possono vedere in tempo reale eventuali anomalie, unitamente al relativo codice di errore. Così si potrà intervenire immediatamente e quando possibile anche da remoto Kit "BIASI Connect" È un "Dispositivo di connessione" Wi-Fi che, operando nelle rete WLAN domestica, permette il controllo della termoregolazione ambiente e del funzionamento della caldaia, sia localmente che da remoto, mediante la nostra APP dedicata. Semplicità di installazione e di utilizzo Per l’installazione del Kit “BIASI Connect” e per la configurazione e l’uso dell' App consultare il Manuale istruzione, installazione ed uso "Biasi Connect". L' App è scaricabile dallo store del proprio dispositivo: Nuovo Scambiatore/Microaccumulo Una soluzione per un comfort unico Grazie all’esclusivo scambiatore sanitario con microaccumulo, vengono accumulati 4 litri di acqua calda, che garantiscono l’immediata disponibilità di acqua sanitaria senza le oscillazioni della prima fase di una normale caldaia istantanea; è realizzato in acciaio/rame ed è coibentato con gusci in EPS per ridurre le perdite di calore in stand-by, un esclusivo sistema che mantiene sempre in temperatura lo scambiatore/microaccumulo, nella fase di prelievo la caldaia passa in produzione istantanea secondo le richieste dell’utenza, al cui termine si trova già alla temperatura impostata, pronto per il prelievo successivo. Tecnologia Gas Adaptive Meno consumi, più efficienza, meno emissioni L’innovativa tecnologia Adaptive Gas, di cui sono dotati tutti i modelli della linea Rinnova, consente l’adattamento in completa autonomia delle caldaie alle diverse tipologie e qualità di gas. L’elettrodo, oltre a rilevare la fiamma, rileva anche le caratteristiche del gas e adatta automaticamente i parametri di combustione per mantenere il massimo livello di efficenza, con conseguente riduzione dei consumi e delle emissioni rispetto ai sistemi di controllo tradizionale. ll sistema Adaptive gas rende la caldaia predisposta a funzionare con qualsiasi tipo di gas senza trasformazioni. Regolazione automatica del gas Adattamento al cambio della qualità del gas Combustione pulita Unico modello adatto a metano e GPL che consente di ottimizzare il magazzinio Nelle caldaie tradizionali i valori della combustione vengono rilevati e regolati solo in fase di manutenzione, inoltre la composizione dei gas di rete non è sempre costante e può creare sulle caldaie prive di dispositivi di controllo della combustione inefficenze del funzionamento compromettendo l’affidabilità, i risparmi e la qualità delle emissioni.Grazie al sistema Gas-Adaptive, le nuove caldaie a condensazione controllano elettronicamente la combustione gestendo al meglio ed in ogni momento l’apporto di gas e aria, adattando automaticamente la CO2. Una produzione "Plastic-FREE" Per un ambiente più sostenibile Un elemento fondamentale che ha guidato tutta la fase di progettazione della nuova caldaia Rinnova Adaptive è la forte attenzione nei confronti dell’economia circolare. Per questo abbiamo impiegato componenti con un maggiore tasso di riciclabilità, eliminando il più possibile l’utilizzo della plastica. Il gruppo in plastica, ad esempio, è stato sostituito con il gruppo in ottone, materiale completamente riciclabile. I gusci di protezione della caldaia sono stati realizzati in cartone e non più in polistirolo. Il frontale, inoltre, non è più in plastica ma in acciaio stampato. Funzionalità del pannello comandi Selettore estate/inverno/off/reset Regolatore temperatura riscaldamento Regolatore temperatura sanitario Lettura digitale della pressione Visualizzazione temperatura sanitaria e riscaldamento da display Visualizzazione diagnostica guasti, stato di blocco e storico guasti Visualizzazione riempimento consigliato e guida al riempimento Visualizzazione mesi mancanti alla scadenza della manutenzione Abilitazione preriscaldo sanitario Funzione FAST: preriscaldo accumulo sanitario Garanzia prodotto : La garanzia su questo articolo è di 24 mesi dalla data dell'acquisto.

Read more less

Caratteristiche tecniche Modello : InoxDens 28S Codice prodotto : 10303.1010.0 Alimentazione : Gpl Efficienza energetica Classe di efficienza energetica riscaldamento : A Classe di efficienza energetica sanitario : A Profilo di prelievo : XL Performance Portata termica nominale riscaldamento : 25,0 kW Portata termica nominale sanitario : 29,0 kW Potenza utile massima riscaldamento 60°/80°C : 24,5 kW Potenza utile massima sanitario 60°/80°C : 28,4 kW Potenza utile massima riscaldamento 30°/50°C : 26,9 kW Potenza utile massima sanitario 30°/50°C : 31,1 kW Rendimento nominale 60°/80°C : 98,0% Rendimento nominale 30°/50°C : 107,4% Classe NOx : 6 NOx ponderato : 28 mg/kWh Temperatura minima e massima riscaldamento : 25° ~ 85°C Pressione minima e massima riscaldamento : 0,3 ~ 3 bar Capacità del vaso espansione : 7,0 litri Temperatura minima e massima sanitario : 30° ~ 60°C Portata massima (ΔT=25 K) : 16,5 l/min Portata massima (ΔT=35 K) : 11,5 l/min Portata sanitari specifica (ΔT=30 K) : 13,8 l/min Alimentazione (V,Hz, Ø) : 220~240/50/1 Grado di protezione : IPX5D Dimensioni e peso Dimensioni (AxLxP) 700x400x300 mm Peso : 31,3 Kg Caldaia a condensazione premiscelata Savio InoxDens S InoxDens completa la gamma SAVIO a condensazione premiscelata: perfetta per impianti a radiatori e idonea con sistemi radianti con gruppi di miscelazione. InoxDens è la caldaia a condensazione compatta che assicura alti rendimenti, bassi consumi e rispetto per l’ambiente. Disponibile per riscaldamento e produzione di acqua calda sanitaria, nelle potenze 24, 28 e 32 kW. Scambiatore primario condensante in acciaio INOX con rivestimento in acciaio per offrire la massima resistenza alla corrosione Bruciatore a premiscelazione totale, acciaio INOX (Classe NOx 6) Modulazione 1:5 Metano e anche GPL Scambiatore sanitario a piastre in acciaio INOX Vaso di espansione da 7 litri Pompa ad alta efficienza con basso consumo energetico Integrazione a sistemi solari Savio, mediante kit solare Lettura digitale nel display della pressione Predisposizione per comando remoto e sonda esterna Gruppo idraulico compatto in ottone. Gruppo di mandata con deviatrice motorizzata, by-pass e rubinetto di carico impianto integrati.Circolatore ERP con sblocco pompa manuale su gruppo di ritorno. Funzionalità del pannello comandi Selettore estate/inverno/off Regolatore temperatura riscaldamento Regolatore temperatura sanitario Lettura digitale della pressione Visualizzazione temperatura sanitaria e riscaldamento da display Visualizzazione diagnostica guasti, stato di blocco e storico guasti Il display opera secondo le modalità: Informazioni disponibili sullo stato di funzionamento e storico errori Parametri programmabili per adeguamento generatore/impianto e SET Utente Parametri generatore Parametri Centri Assistenza Autorizzati Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Technical features Model : Inoa S 29 Reference : 3310665 EU Certificate Number: 0085CU0394 Type of Installation : C10-C13-C23-C33-C43-C53-C63-C83-C93-B23 Gas Category: I2H Energy Performance Nominal heat output in Heating : 5.8 ~ 24.0 kW Heating Thermal Power 60°/80° C : 5,7 ~ 23,6 kW Thermal Power : 4.9 ~ 21.0 kW Nominal heat output in DHW: 5.8 ~ 29 kW DHW thermal power: 5.7 ~ 28.5 kW Combustion efficiency : 98.4% Efficiency at nominal heat input 60°/80° C : 88.5 ~ 98.2 % Efficiency at nominal heat input 30°/50° C : 95.9 ~ 106.5 % Efficiency at 30% at 30° C Hi : 108.6 % Efficiency at idle 60°/80° C : 87.8 ~ 97.6 % Performance Stars : ★★★★ Class : A Maximum shell heat loss ΔT = 30°C : 0.2% Losses to chimney burner in operation: 1.6% Heating Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure : 3 bar Expansion vessel capacity: 8 l High temperature heating temperature : 35° ~ 82° C Low temperature heating temperature : 20° ~ 45° C Domestic hot water DHW temperature : 36° ~ 60° C Specific flow rate in DHW: 13.3 l/min Instantaneous quantity of hot water ΔT=25°C : 16 l/min Instantaneous quantity of hot water ΔT=35°C : 11.4 l/min Stars Sanitary comfort : ★★★ Minimum withdrawal of hot water: 2 l/min Sanitary water pressure: 0.2 ~ 7 bar Withdrawal profile : XL Emissions Residual head : 100 Pa NOx class : 6 Fume temperature G20 at 60/80 : 53° C CO 2 content: 9.4% Maximum flue gas flow rate: 46 Kg/h Excess air : 21% Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Total absorbed electrical power: 64.7 W Minimum ambient temperature of use: >0° C Electrical system protection degree: X5D Dimensions and weight Dimensions (HxWxD): 745x400x319 mm Weight : 28Kg Inoa S Compact wall mounted boiler INOA S is the new Chaffoteaux brand condensing boiler, designed to guarantee great performance and high robustness: the primary exchanger in stainless steel and the metal front panel combine efficiency and durability Installation in partially protected places MET/LPG operation with standard kit AP operation with optional kit Compatibility with positive pressure collective flues (C10) Comfort in Heating Primary condensing exchanger in stainless steel. Up to 108% efficiency and 93% seasonal efficiency. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 20% to 100% of maximum power. Reduced polluting emissions, NOx class 6. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones via Expert Control. Ready for Chaffolink connectivity. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars *** Flow rate 13.2 litres/minute with ΔT = 25ºC (24kW) and 16 litres/min with ΔT = 25ºC (29kW). Comfort of use and installation Single-volume structure and metal front panel for greater sturdiness. LCD display and front hydrometer for better accessibility. Front electrical connections. Extremely easy access to components during maintenance (DHW exchanger, hydraulic unit, etc.) Possibility of connection with external probe. Compatible with Expert Control, modulating and on/off accessories. Easier starting: automatic purge function and directly accessible combustion regulation Energy saving and respect for the environment Up to 35% energy savings in combination with a modulating chronothermostat and external probe. 40% reduction in CO 2 emissions Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMI 30 CS/1-5 Item code : 0010025187 Power supply: methane or LPG Forced draft sealed chamber Performance Heating power : 3.5 ~ 30.0 kW DHW power : 3.5 ~ 30.0 kW Withdrawal flow rate (ΔT = 30K) : 18.0 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 97.8% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 20-litre stratified kettle Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x546 mm Weight : 52.3Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMI Unrivaled sanitary comfort with an integrated storage tank Always ecoTEC plus but with an extra hot water reserve The new ecoTEC plus VMI has been renewed to achieve a higher level of efficiency, always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The system consisting of a boiler with storage tank is simple to assemble : the first step is the installation of the actoSTOR CL wall-mounted storage tank equipped with the relative pipes supplied for domestic water, then the ecoTEC plus VMW wall-mounted boiler is hung on the storage tank . All the necessary material is available within the same packaging. The actoSTOR CL stratification storage tank guarantees the same performance as a 60-litre coil storage tank but with considerably smaller spaces . It is possible, via a parameter in the electronics, to exclude the functionality of the boiler by making the boiler work instantaneously, guaranteeing savings on gas consumption The most significant development of the product is the IoniDetect fuel gas detection system which, in combination with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology allows you to use the boiler with a mixture of gas containing up to 20% hydrogen The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, technician or user. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMI The perfect solution for heating and domestic hot water The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Boiler with integrated 20-litre storage tank A new additional 26 kW size is also available High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 30 CS/1-5 CFI Article code : 0010022023 Power supply: methane or LPG Performance Heating power : 3.5 ~ 30.0 kW DHW power : 3.5 ~ 30.0 kW Withdrawal flow rate (ΔT = 30K) : 14.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 108.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart, they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 4.3/31.1 kW Useful power (min./max.): 3.9/30.0 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 91.1 / 82% Max/min useful heating power (80°C-60°C): 27.4/3.9 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance: Thermal input (min./max): 4.3/33.3 kW DHW thermal power (max/min): 24.9/2.4 kW Heating circuit: Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure: 3 bar Expansion tank capacity: 8 L Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Healthcare circuit: Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 14.5 l/min Instantaneous quantity of hot water ∆T=25°C: 17.4 l/min Instantaneous quantity of hot water ∆T=35°C: 12.5 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Electrical Data: Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 80 W Power supply: LPG (G20/G30) Dimensions: (HxWxD): 745x400x385mm; Weight: 29.7kg Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6.

Read more less

ATTENTION POSSIBILITY OF SUPPLY TO PROPANE THROUGH A SIMPLE ADJUSTMENT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Hermann Saunier Duval THEMA CONDENS 30 SB heating only condensing boiler complete with low NOx methane flue gas kit Model: Efficiency class Heating efficiency class A Heating Fireplace flow rate Qmin/max - 80/60 °C 3.6 - 30.6 generals Product code 0010025116 Dimensions HxWxD 740x418x344 THEMA Condens SB Wall-mounted combined condensing boiler for heating and domestic hot water in single-family units The new Thema Condens has a renewed aesthetic with modern and essential lines, flat casing to facilitate installation (dimensions and hydraulic connections unchanged compared to the previous version) and a new touch-screen user interface. The boiler has been designed as the ideal solution for single-family homes in case of replacement of traditional wall-mounted or condensing boilers that work on high-temperature or low-temperature systems. The high level of sanitary comfort is guaranteed by the exclusive Aquaspeed® technology which is able to offer the user immediate delivery of hot water at the desired temperature, without long waiting times and costly waste of water. The pre-heating of the primary circuit, and therefore also of the secondary stainless steel plate exchanger, in fact ensures an instantaneous response from the boiler to any sudden request for domestic hot water. Thema Condens is available in three power sizes: the 25 and 30 kW versions are joined by the new 35 kW size, all with methane fuel but convertible to propane via simple electronic regulation, without the need for any conversion kit. The range is also enriched with a new solution: the 25, 30 and 35 kW SB version (heating only) , which can be combined with any Hermann Saunier Duval boiler. Even the new SB boilers are methane powered, but electronically convertible to commercial propane. Ideal for installation in single-family homes New FlameFit® combustion system Hot water immediately available thanks to Aquaspeed® technology New design with flat casing and touch-screen user interface New heating only versions of 25, 30 and 35 kW ErP class A+ in combination with MiGo climatic control unit FlameFit® technology: maximum safety, low consumption, reduced emissions. The innovative FlameFit® combustion technology with which the version for single-family units is equipped allows for autonomous adaptability of the boiler to the different types and qualities of gas, always guaranteeing optimized and completely safe operation. In fact, the flame control electrode detects the changing characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting boiler operation to the actual needs of the user. This therefore leads to high performance with a reduced quantity of gas, saving energy and consequently limiting consumption and polluting emissions. The FlameFit® technology makes Thema Condens ready for immediate operation with any type of future gas, without the need for any conversion kit. Touch screen user interface The interface of the new Thema Condens features a modern digital touch display and was developed to facilitate boiler management by the user. The symbology of the various keys allows a quick understanding of the functions of the appliance and of the parameter setting methods according to one's comfort needs. Excellent visibility of parameters and icons Delivery temperature regulation Intuitive navigation Simplified programming All parameters under control Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS EQUIPPED WITH AUTOMATIC COMBUSTION CONTROL. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Baxi LUNA IN PLUS 30 kW low NOx built-in condensing boiler complete with flue gas exhaust kit standard fittings kit cod. A7736265 Methane or LPG - NEW Technical features XL load profile Seasonal space heating energy efficiency class A Water heating energy efficiency class A DHW nominal heat input kW 30 Heating nominal heat input kW 24.7 Reduced heat input kW 3.9 Sanitary nominal thermal power kW 29 Expansion tank capacity l 25-80 Sanitary water production ∆T 25°C (1) l/min 16.1 Minimum domestic water flow rate l/min 2 Dimensions (hxlxp) - with case mm 1170x600x245 Dimensions (hxlxp) - boiler mm 770x470x238 Degree of protection IPX5D MOON IN PLUS Luna IN Plus is the new range of wall-mounted condensing boilers ideal for outdoor built-in installations thanks to the fittings kit for built-in installation supplied as standard . With Luna IN Plus it is possible to create three different installations: built-in installation with containment box; suspended installation in partially protected places; open-air suspended installation with cover kit. Luna IN Plus: the ideal boiler for built-in installation outdoors Luna IN Plus is the ideal boiler for built-in installation outdoors specifically designed to replace an old built-in generator. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments (even in new homes) and in general in all housing units where efficient space management is an important objective (eg in technical rooms or in the presence of containment boxes) The packaging includes the bracket and installation fittings for inserting the boiler into the containment box (available as an accessory). Outdoor hanging installation Luna IN Plus can be suspended outdoors, in partially protected places (e.g. balconies) and also outdoors with the addition of the outdoor cover kit. To facilitate installation, the telescopic fitting kit accessory is available in both installations (with gas and sanitary water tap). Inside the packaging are the template and the hooking bracket for wall installation. Features Luna IN Plus Wide modulation range: greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in emissions pollutants Gas Adaptive Control Innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Compactness Depth of only 238 mm which allows it to be installed in most of the boxes on the market. Digital control panel Digital control panel that allows easy programming and immediate boiler operation diagnostics with recording of the latest anomalies (STANDARD in models Luna IN Plus 26, 30 and 1.24 Antifreeze function The boiler has been designed to operate down to -15°C. Furthermore, the anti-freeze function provides for the automatic ignition of the burner, avoiding freezing phenomena hydraulic system Electric three-way diverter valve (also heating only model) Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense even in DHW operation Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Room probe, heating and DHW programmer integrated in the remote control panel Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the gas in case of water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 4.3/31.1 kW Useful power (min./max.): 3.9/30.0 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 91.1 / 82% Max/min useful heating power (80°C-60°C): 27.4/3.9 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance: Thermal input (min./max): 4.3/33.3 kW DHW thermal power (max/min): 24.9/2.4 kW Heating circuit: Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure: 3 bar Expansion tank capacity: 8 L Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Healthcare circuit: Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 14.5 l/min Instantaneous quantity of hot water ∆T=25°C: 17.4 l/min Instantaneous quantity of hot water ∆T=35°C: 12.5 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Electrical Data: Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 80 W Power supply: METHANE (G20/G30) Dimensions: (HxWxD): 745x400x385mm; Weight: 29.7kg Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech Features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6.

Read more less

Chaffoteaux Condensing Boiler mod. NIAGARA ADVANCE 35 C low NOx Complete with Methane Fume exhaust kit Code: 3310627 Power 35 kW Energy class in heating A Energy class in sanitary A Pickup profile XXL Dimensions HxWxD 900 x 600 x 460 mm Technical data Nominal heat input in heating max/min (Hs) Qn 34.5/3.5 kW Max/min DHW nominal heat input (Hs) Qn 38.3/3.9 kW Efficiency at nominal heat input (60/80°C) Hi/Hs 97.5/87.8% Performance stars (dir. 92/42/EEC) **** NOx class 6 Expansion tank capacity 8l Power supply voltage/frequency 230 / 50 V/Hz Degree of protection of the electrical system IP X5D NIAGARA ADVANCE Niagara Advance , a concentrate of performance, comfort and compactness, combines the technology of the new Advance range with two 20-litre boilers to meet the most demanding domestic hot water needs. MAXIMUM PERFORMANCE New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:10. Optimized internal silencer. SRA function. Gas transformation with kit included as standard. Ready for Chaffolink connectivity. HEALTHCARE COMFORT 40 liter reserve thanks to two stratified stainless steel inter-accumulators. Permanent availability of domestic hot water even with discharged inter-tanks. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate up to 19.8 l/min with ΔT = 25ºC. Integrated 2-litre sanitary expansion tank. EASY INSTALLATION Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 20% energy savings in combination with Expert Control and the SRA function. Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX CX GREEN 24 EU CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW 2017 MODELÿThe new compact condensing boiler with aluminum alloy condensing exchanger with all the necessary requirements to achieve the required standards in terms of energy savings Technical specifications Product code:ÿ3310508 Energy label specifications according to the European ErPÿ directive ClassÿA heating energy efficiency Sanitary energy efficiency ClassÿA Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat input in heatingmax/min (Hi):ÿ23.5/4.5ÿkW Nominal heat input in sanitary max/min (Hi):ÿ23.5/4.5ÿkW Heating max/min thermal power (80øC-60øC):ÿ23/4,4ÿkW Efficiency at nominal heat input:ÿ97.7 / 88% Efficiency 30% of nominal heat input:ÿ104.3 / 94 % Capacity of the expansion vessel: 8 lt Min/max heating temperature (high temperature range)øC 35/82 Min/max heating temperature (low temperature range)øC 25/45 Sanitary temperature min/maxøC 36/60 Instantaneous quantity of hot water T=25øC l/m 13.9 Instantaneous quantity of hot water T=35øC l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply Voltage/Frequency V/Hz 230/50ÿ Total absorbed electrical power W 34ÿ Electrical protection degrees IP X5D Main features CX GREEN EU The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy savings. Operationssolmethane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with T = 25§C. (24kW) Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4 star efficiency of combustion in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones using Expert Control. Self-diagnosis system by code. LCD display. Convenience of installation use Possibility of connection with external probe. Compatible with Expert Control, modulatingÿ and on/off accessories. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 20% energy savings in combination with chronothermostat external probe. 40% reduction in CO2 emissions**. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres or As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less