THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 24/28 AS/1-1 Article code : 0010026088 Power supply: methane Performance Heating power : 6.9 ~ 23.9 kW Nominal heat input in DHW : 6.9 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 108.2% Domestic hot water production (ΔT = 30K): 13.4 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Product name VAILLANT ecoTEC PURE CONDENSING VMW 246/7-2 COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Heating efficiency class A Sanitary efficiency class A XL load profile Nominal thermal power in sanitary kW 28.0 DHW nominal heat input kW 7.8 - 24.8 Performance stars (Dir. 92/42CEE) ★★★★ NOx class 5 Nominal flow rate in heating (ΔT=20K) l/h 1033 Expansion vessel capacity l 8 Maximum operating overpressure bar 3 Domestic hot water production (ΔT = 30K) l/min 13.5 Domestic hot water comfort stars (prEN 13203) ★★ Power supply V/Hz 230/50 Total electric power W 100 Dimensions H x W x L: 720-335-440; 30.8Kg Sound power dB(A): 49 Degree of protection IP X4 D Power supply: METHANE General characteristics Vaillant condensing boiler With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. NEW EcoTEC PURE The easiest way to switch to Vaillant condenser. Vaillant DNA is synonymous with quality. Always. ecoTEC pure represents the solution that Vaillant offers to anyone who wants to switch to a Vaillant condensing boiler without worries. ecoTEC pure is really simple to install. It is equipped with vertical hydraulic connections that make replacement jobs simple, both for those who are abandoning a traditional boiler (atmo-turboBLOCK), and for those who choose Vaillant for the first time. All in full compliance with the characteristics that identify Vaillant products: the boiler is in fact in energy class A both in heating and in the production of hot water. Even the new ecoTEC pure design immediately recalls the quality and reliability that characterize the company's DNA; the lines are clean for this new indoor condensing boiler with standard measurements: 70cm high, 44 wide and 33 deep. ecoTEC pure heats the water and the rooms to give the right comfort in a convenient way. It is available with a single model in the power of 24kW. Comfort, savings, safety Instant hot water even for small requests High sanitary comfort Condensation with Vaillant DNA The most convenient solution The vertical hydraulic connections allow for carefree replacement Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 18/24 AS/1-1 Item code : 0010026087 Power supply: methane Performance Heating power : 6.0 ~ 18.3 kW Nominal heat input in DHW : 6.0 ~ 24.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 107.8% Domestic hot water production (ΔT = 30K): 11.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion tank Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 30 CS/1-5 Article code : 0010022022 Power supply: methane or LPG Performance Heating power : 3.5 ~ 30.0 kW DHW power : 3.5 ~ 30.0 kW Withdrawal flow rate (ΔT = 30K) : 14.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 108.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. SO THE TRANSFORMATION KIT IS REQUIRED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE VAILLANT ecoTEC PRO CONDENSING VMW 286/5-3+ COMPLETE WITH FUME EXHAUST KIT -ErP Technical features For heating and domestic hot water production Forced draft sealed chamber Nominal thermal power 24.0 kW ErP energy class (Heating and DHW): Class A DHW nominal heat input 28.6 kW Nominal heat input in heating mode 24.5 kW Water content in the generator 2.2 l Expansion vessel capacity 10 l Domestic hot water production (ΔT = 30K) 13.4 lt Dimensions (hxpxl) mm 720 x 338 x 440 ; 36kg Version: LPG (WITH SPECIAL TRANSFORMATION KIT) General characteristics Vaillant condensing boiler With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. EcoTEC PRO The wall mounted boiler that offers the right balance between performance and comfort. The ecoTEC pro VMW (heating and DHW production) are available in power ratings of 19 and 24 kW. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. Its simplicity of regulation makes it the ideal boiler for all users. ecoTEC pro is equipped with an extremely simple interface with plain text and backlit display. The small dimensions of ecoTEC pro VMW 70cm high, 44cm wide and 35cm deep (identical to the previous version) allow installation in any environment. A new high-efficiency pump and new electronics allow ecoTEC pro to consume very little electricity, guaranteeing considerable savings throughout the year. Instant DHW production Intuitive user interface Simplicity of management ****Efficiency in heating Modulation 1:5 Modulating pump (Class A) Steel primary exchanger 10 l expansion vessel transfer kit from methane to propane or propane air code 0020160884 Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 26 CS/1-5 Article code : 0010022020 Power supply: methane or LPG Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 12.6 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 103.4% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 34.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

VAILLANT ecoTEC PRO CONDENSING VMW 286/5-3+ COMPLETE WITH FUME EXHAUST KIT -ErP NOx 5 Technical features For heating and domestic hot water production Forced draft sealed chamber Nominal thermal power 24.0 kW ErP energy class (Heating and DHW): Class A DHW nominal heat input 28.6 kW Nominal heat input in heating mode 24.5 kW Water content in the generator 2.2 l Expansion vessel capacity 10 l Domestic hot water production (ΔT = 30K) 13.4 lt Dimensions (hxpxl) mm 720 x 338 x 440 ; 36kg Version: CNG General characteristics Vaillant condensing boiler EcoTEC PRO The wall mounted boiler that offers the right balance between performance and comfort. The ecoTEC pro VMW (heating and DHW production) are available in power ratings of 19 and 24 kW. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. Its simplicity of regulation makes it the ideal boiler for all users. ecoTEC pro is equipped with an extremely simple interface with plain text and backlit display. The small dimensions of ecoTEC pro VMW 70cm high, 44cm wide and 35cm deep (identical to the previous version) allow installation in any environment. A new high-efficiency pump and new electronics allow ecoTEC pro to consume very little electricity, guaranteeing considerable savings throughout the year. Instant DHW production Intuitive user interface Simplicity of management ****Efficiency in heating Modulation 1:5 Modulating pump (Class A) Steel primary exchanger 10 l expansion vessel transfer kit from methane to propane or propane air code 0020160884 Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Il prodotto è su ORDINAZIONE, verrà spedito in 10/15 giorni lavorativi!   Dati Tecnici Campo di potenza calorifica nominale a 50/30°C: 24,7 - 123,4 kW Campo di potenza calorifica nominale a 60/40°C: 24 - 120,0 kW Campo di potenza calorifica nominale a 80/60°C: 22 - 112 kW Grado di rendimento nominale (stazionario) a 50/30 °C:  108 % Grado di rendimento nominale (stazionario) a 60/40 °C: 105 % Grado di rendimento nominale (stazionario) a 80/60 °C: 98 % Rendimento 30% : 109 % Massima portata termica al focolare in modo riscaldamento (riferito al potere calorifico Hi e solo modo riscaldamento) 114,3 kW Massima portata termica nella carica del bollitore: 114,3 kW Minima portata termica al focolare (riferito al potere calorifico Hi e solo modo riscaldamento) : 22,9 kW Paese di destinazione (denominazione secondo ISO 3166): IT (Italia) Raccordi riscaldamento mandata/ritorno lato apparecchio: G 1 1/4" Classe NOx 6 Collegamento aria-fumi 110/160 mm Gas: Metano Dimensione e Peso (LxAxP): 480 x 960 x 603 mm ; Peso 90 kg     ecoTEC plus ad alta potenza è la caldaia ideale per gli impianti di riscaldamento centralizzati residenziali o commerciali di taglio medio. Cuore della macchina è il nuovo scambiatore primario sviluppato da Vaillant, in acciaio inox con un elevato contenuto di acqua, per la massima efficienza e sicurezza. L’affidabilità garantita da Vaillant Comfort Safe: un innovativo programma di monitoraggio continuo degli organi di controllo, che, in caso di guasto lo segnala all’utente e lascia in funzione la macchina, con la potenza la minimo. Queste caldaie possono essere installate anche in cascata e permettono di raggiungere una potenza complessiva di 720 kW con un massimo di 6 apparecchi. Il collettore idraulico Vaillant permette, con pochi accessori aggiuntivi, ampia flessibilità in termini di potenza installata, grazie anche a due differenti modalità di fissaggio: in linea oppure in modalità fronte-retro. Una serie di nuovi accessori, tra cui 6 modelli di scambiatori, permettono la perfetta integrazione in impianti idraulici nuovi o esistenti. Le ecoTEC plus VM (solo riscaldamento) ad alta potenza sono disponibili nei modelli da: 80, 100 e 115 kW.   Ideale per case plurifamiliari Basse emissioni in ambiente Pompa modulante alta efficienza Vaillant Comfort Safe: sicurezza e affidabilità Ridotti consumi elettrici e di gas   Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 35 CS/1-5 Article code : 0010022024 Power supply: methane or LPG Performance Heating power : 4.0 ~ 34.1 kW DHW power : 4.0 ~ 34.1 kW Withdrawal flow rate (ΔT = 30K) : 16.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 105.2% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMI 30 CS/1-5 Item code : 0010025187 Power supply: methane or LPG Forced draft sealed chamber Performance Heating power : 3.5 ~ 30.0 kW DHW power : 3.5 ~ 30.0 kW Withdrawal flow rate (ΔT = 30K) : 18.0 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 97.8% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 20-litre stratified kettle Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x546 mm Weight : 52.3Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMI Unrivaled sanitary comfort with an integrated storage tank Always ecoTEC plus but with an extra hot water reserve The new ecoTEC plus VMI has been renewed to achieve a higher level of efficiency, always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The system consisting of a boiler with storage tank is simple to assemble : the first step is the installation of the actoSTOR CL wall-mounted storage tank equipped with the relative pipes supplied for domestic water, then the ecoTEC plus VMW wall-mounted boiler is hung on the storage tank . All the necessary material is available within the same packaging. The actoSTOR CL stratification storage tank guarantees the same performance as a 60-litre coil storage tank but with considerably smaller spaces . It is possible, via a parameter in the electronics, to exclude the functionality of the boiler by making the boiler work instantaneously, guaranteeing savings on gas consumption The most significant development of the product is the IoniDetect fuel gas detection system which, in combination with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology allows you to use the boiler with a mixture of gas containing up to 20% hydrogen The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, technician or user. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMI The perfect solution for heating and domestic hot water The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Boiler with integrated 20-litre storage tank A new additional 26 kW size is also available High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE AND IS ADJUSTABLE TO LPG. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Pro VMW 286 Methane model with Wi-Fi: 0020256401 Energy Class in Heating: A Energy Class in Sanitary: A Heating power: 6.2 - 24.0 kW Sanitary power: 6.2 - 28.0 kW Withdrawal flow rate (ΔT = 30K) : 13.4 l/min DHW temperature adjustment: 35° - 65° C Possible diameter of burnt gas outlets: 60/100 mm; 80/125; 80/80; 60/60mm Gas Pipe Diameter: 12.70 mm (1/2") Hydraulic Pipe Diameter : G3/4" Dimensions (HxWxD): 720x440x338 mm Warranty program 7 All Vaillant condensing boilers are included in the Guarantee Program 7. By purchasing a Vaillant condensing boiler you can extend the guarantee from 2 to 7 years and benefit from exclusive advantages: No fixed call fee Free labor Free original spare parts VMW EcoTEC Pro boiler All models in the VMW ecoTEC pro range feature etas = 94% efficiency. For this reason, if combined with a class VI thermoregulation (such as vSmart), they reach a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The ecoTEC pro VMW boiler (heating and DHW production) is available in 23kW and 28 kW power ratings. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing considerable savings throughout the year. Its simplicity of adjustment makes it the ideal boiler for all users, as well as having an extremely simple interface with plain text and backlit display for ease of use ecoTEC pro is the ideal boiler for Vaillant on Vaillant replacements: installation is simple and quick, as is adjustment of the operating parameters. The ecoTEC pro range includes: the combined version, the smart connectivity version in combination with vSMART, a version designed for installation in multiple collective flues and two versions for installations in single collective flues. ecoTEC pro CM is also the right choice for boiler replacement in multi-family houses or for more complicated installations. Vaillant in fact provides a range of products suitable for the flue as well as multiple options as regards the accessories dedicated to the boiler: a flue pressure switch, combined with the electronics, self-adjusts the value to be set for the length of the vertical ducting so as to correctly evacuate the exhaust fumes. The ecoTEC pro CS models are equipped with a dedicated kit, included in the supply, consisting of a smoke non-return valve, 87° bend and 80/125mm rigid section for connection to a single collective flue Small size The small size of ecoTEC pro VMW allows it to be installed in any environment: ✔ 70cm height ✔ 44cm wide ✔ 35cm depth (identical to the previous version) Available with additional approval for outdoor installations down to -5°C Control the heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing ecoTEC plus to be controlled and adjusted at any time, from anywhere, quickly and intuitively. Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Characteristics Solution for heating and domestic hot water Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 18/24 AS/1-1 Article code : 0010026087 Power supply: LPG Performance Heating power : 6.0 ~ 18.3 kW Nominal heat input in DHW : 6.0 ~ 24.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 107.8% Domestic hot water production (ΔT = 30K): 11.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less