Unical KON X SLIM 35 C condensing boiler complete with low NOx LPG fume exhaust kit - New Minimum/nominal useful power in condensing kW 4.6 ÷ 33.8 Heating efficiency class A Declared load profile XL Sanitary efficiency class A Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) η4 % 88.7 Production DHW cont. Dt 25 K (mixed) l/min 18.6 Total expansion vessel capacity l 6 IP X5D degree of protection NOx class 5 Dimensions HxWxD mm 800x520x180 KON X SLIM KONx SLIM is a condensing boiler running on methane or LPG, with instantaneous production of domestic hot water. Covered with a satin finish AISI 304 stainless steel casing, it is ideal for outdoor installations, but equally elegant indoors. KONx SLIM is: Performant 24 and 35 kW (Range rated) Modulation ratio 1:8 Low NOx class 5 High energy efficiency A+ (System) the top of the category, >98% Hs (superior calorific value) Insulated and protected IP X5D, suitable for outdoor installation according to current standards (up to -15°C with antifreeze kit) Extremely compact with its depth of only 18 cm, Unical's record among wall-hung condensing boilers KONx SLIM, thanks to the RCh chronothermostat, OT multiprogram modulator, connected to the ambient and external probes supplied as standard, reaches seasonal efficiency equal to energy class A+ in heating. HWS "Hot Water Speed" is the new KONx SLIM electronics that switches from heating to DHW function with burner and pump always active, considerably improving user comfort who does not have to wait for hot water. Covered with a satin-finish AISI 304 stainless steel casing with a tapered-edge casing finish, KONx SLIM appears to have an essential and very elegant line, combining, with its hi-tech style, with the other appliances in the house Super small size depth of only 18cm Management of 2 temperature zones (high/low) by applying a second on/off thermostat Sliding temperature programmed to operate with the lowest possible delivery temperature to help save energy Intelligent system filling to guarantee functionality If the pressure is below 0.4 bar in the system circuit, the automatic water filling starts for 30 seconds once a day. If the request is repeated several times, a warning signal appears on the remote control Anti-overheating post-circulation automatically after the burner goes out, the boiler keeps the pump running for 5 minutes, preserving the components Chimney sweep function allows maintenance technicians to carry out the checks required by current standards in terms of efficiency and emissions Multigas operation (natural gas or LPG) with simplified switching Double expansion tank If necessary, it can mount an external auxiliary expansion tank (optional) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

optional box Savio Edilia HE 25 built-in methane condensing boiler complete with low NOx flue exhaust kit Cassone Optional Model: Edilia HE Natural gas product code 10312.1032.1 Energy class A ErP specifications Heating/DHW nominal heat input 21.0 / 26.0 kW Heating/DHW maximum useful power 60°/80°C * 20.3 / 25.1 kW Energy Efficiency ★★★★ NOx class 6 Minimum/maximum heating pressure bar 0.3 / 3.0 Minimum/maximum DHW pressure bar 0.3 / 10.0 Degree of protection n° IPX5D Height x Width x Depth mm 1200x600x240 EDILIA Edilia HE is the new Savio range of built-in condensing boilers . Excellent performance and high yields that last over time thanks to the innovative heat exchanger. Ease of use thanks to the digital control panel with display designed to communicate with the user easily and comfortably. Available in versions for heating and domestic hot water production Edilia HE presents a complete range of powers, 20 and 35 kW combi models in the same extremely compact dimensions: 1200 x 600 x 240 mm. Both versions of Edilia HE are in class A , therefore they benefit from the tax deduction according to current legislation. Main features High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort (★★★ EN 13203) Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, built in stainless steel (Class NOx 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 l expansion vessel for mod. 25S and 10 l for mod. 35S High efficiency pump with low energy consumption Maximum power adjustable according to the system Degree of protection IPX5D Recessed installation in the wall Integration with Savio solar systems, using a solar kit Digital control panel with backlit display Analog reading of the pressure on the machine, digital on the remote Arrangement for remote control (optional) and external probe as standard High circulation single coil primary heat exchanger Savio introduces the new stainless steel heat exchanger for condensing boilers to the market: Round . Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations . Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Thermoregulation By connecting the external probe (standard) and the remote control (optional) directly to the boiler, climatic regulation can be used. Edilia HE will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption . By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home . Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START CONDENS 29 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical features RIELLO START CONDENS BOILER 29 KIS METHANE Technical features Product code: 20100124 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Sanitary nominal heat input: 29 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.9% Profit return 30% (47th return): 108.4% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 16.6 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 32 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG START CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models for indoor, outdoor, built-in, with stainless steel storage tank Start Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can also be installed outdoors in a partially protected place. It is available in version 25 (with 25 kW of DHW power and 20 kW in heating) and 29 (with 29 kW of DHW power and 25 kW in heating). Characteristics: Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air (accessories), this modification is the responsibility of the installer or the technical assistance service. Possibility of outdoor installation in partially protected places, using special accessory kits. Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models and heating only for indoors, outdoors in partially protected places Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Residence Condens 35 kis condensing boiler complete with Low NOx Methane Fume Kit class A - NEW Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Code 20139528 Heating/DHW operating characteristics Heating nominal heat input kW 30 Nominal thermal power (80°-60°) heat kW 29.2 Maximum heating pressure bar 3 NOx class 5 Dimensions HxWxD mm 740x420x350 Electrical data Total electric power (pmax heating) W 75 Supply voltage V - Hz 230 - 50 IP X5D degree of protection Power supply: CNG/LPG RESIDENCE CONDENS (heating only) RIELLO PRESENTS RESIDENCE THE NEW RANGE OF CONDENSING BOILERS NEW EXCHANGER Wrapped stainless steel primary exchanger. Efficiency and reliability in the heart of the Residence. DOMESTIC COMFORT FUNCTION Domestic water pre-heating with Touch&Go function for activation upon request directly from the drawing tap. ACTIVE COMBUSTION CONTROL Advanced electronic combustion control system which constantly monitors combustion to obtain constantly optimized consumption and emissions. DIGITAL USER INTERFACE Simple and intuitive backlit LCD display. Ease of setting thanks to the silk-screened keys dedicated to the individual user functions. MODULATING CIRCULATOR High efficiency circulator with flow rate modulation and regulation logic that can be set between different modes according to the type of system. HIGH EFFICIENCY The high efficiency of the primary exchanger, the modulating circulator and the continuous control of the combustion parameters guarantee very low consumption even after years of operation. QUICK INSTALLATION Speed ​​and ease of installation thanks to the compact dimensions, accessibility of the components and external electrical connections. UNIQUE VERSION METHANE - LPG Dedicated codes are no longer necessary in the case of LPG because Residence is able to automatically adapt its operation to the type of fuel with rapid setting from the display. FLEXIBLE INSTALLATION The characteristics of Residence and its compact dimensions make it the ideal solution for both indoor and recessed installation (model 25 KIS only) or outdoors in a partially protected place. RESIDENCE, HEART OF STEEL The new RESIDENCE exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. NEW PRIMARY EXCHANGER IN STAINLESS STEEL The single coil geometry (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents clogging. Front access facilitates periodic maintenance and cleaning of the combustion chamber. SELF-ADAPTING ELECTRONIC COMBUSTION CONTROL The new Residence is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionisation electrode. Thanks to the ACC, Residence is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Residence also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the mixture. The ACC system also simplifies installation. During ignition, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. MANY NEEDS, ONE SOLUTION RESIDENCE IS ALWAYS THE IDEAL CHOICE THANKS TO THE TECHNICAL SOLUTIONS AND THE COMPACT DIMENSIONS, IT CAN BE USED IN ANY INSTALLATION SITUATION INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment. OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the accessory antifreeze heater kit RECESSED Inside a built-in box thanks to its compact dimensions (model 25 KIS only). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER VICTRIX TERA 24 KW IMMERGAS CONDENSING BOILER COMPLETE WITH LPG FUME EXHAUST KIT Technical features Product code: 3.027368 Energy label specifications according to the European ErP directive Heating energy efficiency Class Sanitary Energy Efficiency Class Withdrawal profile: XL Characteristics of heating/DHW operation: Maximum nominal heat input in DHW kW 28.8 Maximum nominal heat input in heating kW 24.6 Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) % 102.3 Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 13.5 Nominal heating expansion vessel capacity (total) liters 8 (5.8) Electrical protection degree IP X5D Boiler weight full of water (empty) kg 35.8 (33.6) Dimensions and installation scheme: VICTRIX TERA Everything you need, immediately and in a small space It is the new line that strengthens the Immergas range with boilers dedicated to those looking for quality and simplicity. All the appliances are condensing and above all with total premixing to save gas efficiently. The dimensions are compact and the easy placement allows flexibility to adapt to new installations or to replace existing appliances in the home, outdoors in protected places, recessed with OMNI CONTAINER. There are two instantaneous versions - 24 and 28 kW - and one for heating only of 24 kW which can be combined with boilers of various capacities. The entire range is equipped with a condensing module with stainless steel coil and designed to comply with the new European directives on the use of energy. VICTRIX TERA boilers fall into class 6, the most ecological in the European classification, for low emissions of carbon monoxide (CO) and nitrogen oxides (NOx). All versions can discharge the fumes on the wall in the cases envisaged by DL 102 of 4 July 2014. The controls are simple, the LCD display is clear and the selection buttons for adjustments and settings are activated quickly. Features and strengths: Low consumption: the low consumption circulator allows for considerable savings in electricity. Standard: the cover of the water connections improves the aesthetics in domestic environments. Comfort Ease of use: practical buttons and a backlit display allow you to easily manage and view the boiler setting. DOMINUS App: simple and intuitive, it allows you to check the functioning and temperature of the boiler, turn it on and off from anywhere via smartphone or tablet. Options. Environmental compatibility Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 6 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO INOXDENS HE 35S* Condensing Boiler Complete With Methane Fume Exhaust Kit - NEW ErP Model: INOXdens HE 35S ErP specifications Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XXL Heating/DHW nominal heat input: 29/33.5 kW Heating/DHW maximum useful power 60°/80°C: 28.2/32.5 kW Heating/DHW maximum useful power 30°/50°C: 31/36kW Yield name 60°/80°C: 97.4% Yield at 30% load: 107.4% Energy yield n° **** NOx class 6 Weighted NOx: 47 mg/kWh Minimum/maximum heating temperature: 25/80°C Minimum/maximum heating pressure 3.0/0.3 bar Expansion tank capacity 7.0 l (total) Minimum/maximum domestic hot water temperature 35/60°C Maximum flow rate (ΔT=25K)/(ΔT=35K): 18.6/13.3 l/min Specific sanitary flow rate (ΔT=30 K): 15.5 l/min Voltage / Power at nominal heat input V~/ W 230/118 Degree of protection IPX5D Dimensions HxWxD 700x400x290; 34.5 kgs Power supply: methane or LPG INOXDENS The perfect compact boiler for underfloor systems and radiator systems The adjustable maximum useful power parameter in heating meets the needs of modern construction without compromising the comfort required in the production of domestic hot water. In fact, this function makes it possible to limit the maximum useful power in heating, independently of the useful DHW power. INOXDENS HE is the new Savio range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large display. Available in the versions for heating and domestic hot water production and for heating only INOXDENS HE presents a complete range of powers, 20 and 30 kW combi models and 16 KW SV models, in the same extremely compact dimensions (700 x 400 x 290 mm). INOXDENS HE has its strong point in the innovative heat exchanger designed to provide long-lasting high yields digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire Savio condensing range, INOXDENS HE allows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort (★★★ EN 13203) Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, built in stainless steel (Class NOx 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tank High efficiency pump with low energy consumption Maximum power adjustable according to the system Degree of protection IPX5D Can be installed in a partially protected place Integration with Savio solar systems, using a solar kit Digital control panel with backlit display Analog pressure reading Arrangement for remote control and external probe. High regulation single coil primary heat exchanger Savio introduces the new stainless steel heat exchanger for condensing boilers to the market: Round. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single strip of stainless steel to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BERETTA CIAO AT 25 CSI CONDENSING BOILER COMPLETE WITH LPG FUME EXHAUST KIT - NEW ErP Product code: 20113788 Characteristics: Energy efficiency in heating: B Energy efficiency Sanitary: A Sanitary load profile: XL Nominal heat input: 25 kW Electric Power: 129W Supply voltage/frequency: 230/50 Volt/Hz Electrical protection degree: X5D ip Dimensions HxWxD: 780 x 400 x 338 ; 40 Kg Gas version available: METHANE Warm-up exercise: Maximum pressure and temperatures: 3/90 bar/°C Heating temperature selection range: 40/80 °C Pump: pump head available for the system: 266 m/bar Expansion tank capacity: 8 l Healthcare exercise: Maximum pressure: 6 bars Minimum pressure: 0.15 bar Quantity of hot water with ∆t=25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37 - 60 °C NB. THE BOILER WILL BE SUPPLIED WITH METHANE, THE ADJUSTMENT NECESSARY FOR LPG OPERATION WILL BE CARRIED OUT FREE OF CHARGE BY THE BERETTA ASSISTANCE CENTER DURING THE FIRST IGNITION. Beretta HELLO AT Hi AT, ideal for replacement in systems with radiators. Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving. High performance and low consumption In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger. Management: The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. The Ciao AT technology makes use of the condensing exchanger which recovers the latent heat of the fumes, the same principle used by condensing boilers. The exchanger, located at the top left, is connected directly to the fan which pushes the fumes inside it, before they are definitively expelled. The difference in the temperature of the fumes between the ~140°C inlet and the ~65°C outlet of the condensing exchanger is indicative of the amount of heat recovered from them. The return from the system first passes through the condensing exchanger which recovers the heat from the fumes, and then passes through the primary exchanger, where it receives the remaining heat in order to reach the required flow temperature. The water then recovers part of the heat from the fumes, which would otherwise be expelled into the atmosphere, thus giving rise to less waste and consequently greater savings for the user. Outdoor installation: Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board anti-freeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required. Up to 17 meters of Ø 60 ducting with the Ciao AT boiler: With Ciao AT it is possible to comfortably duct even the most "difficult" flues thanks to the approval for Ø 60mm flue systems which is added to the traditional Ø 80 mm ducting flue system. The main 60mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. TECHNICAL FEATURES: Specific for systems with radiators and radiators (at high temperature) Condensing post exchanger in aluminum alloy Possibility of outdoor installation with antifreeze heater kit (optional) IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Low consumption circulator 6 m (EEI≤0.20) Hydraulic connections cover (optional) Condensate collection neutralizer drawer kit (optional) Template, hydraulic fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: EVOlution Prime 26 Product code : A7715732 Typology: Condensation Installation: Recommended for replacing conventional boilers Power supply: methane or LPG Energy efficiency Energy efficiency class in heating: A DHW energy efficiency class: A Load profile : XL Performance DHW nominal heat input: 26.7 kW Nominal heating heat input: 20.6 kW Useful heat output at 30% rated heat output and low temperature regime: ** P1 6.7 kW Emissions of nitrogen oxides NOx : 38 mg/kWh Minimum operating temperature : -5°C Heating expansion vessel capacity: 8 litres Heating circuit water temperature adjustment: 25° ~ 80°C Sanitary water temperature adjustment: 35° ~ 60°C Sanitary water production ΔT 25°C : 13.8 l/min DHW circuit minimum water flow rate: 2 l/min Minimum heating circuit water pressure: 0.5 bar Degree of protection : IPX5D Dimensions Dimensions (HxWxD): 700x395x279 mm Weight : 26.0 Kg EVOlution PRIME Wall mounted condensing gas boilers ideal for replacing conventional boilers The new range of EVOlution PRIME condensing boilers has been equipped with an innovative Baxi patented exchanger. Single Ø 28 mm self-cleaning stainless steel coil, with wide passages. Significant reduction of load losses Greater thermal efficiency Reduction of any deposits and therefore less risk of clogging Ease of maintenance The range of EVOlution PRIME condensing boilers is divided into three models, 26 and 30 kW for heating and instantaneous domestic hot water production: the 26 Mago model is equipped with the Baxi Mago SERIES, while it remains an accessory for the other two models. EVOlution PRIME has been designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A++ to G and which will pass from A+++ to F from 09/26/2019. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products. The advantages of the EVOlution PRIME condensing boiler Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce installation time. The EVOlution PRIME has the same center distances of the hydraulic connections of the conventional BAXI boilers to be replaced. Front access to the electrical connection also speeds up connection times. Lower energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue outlet and the separate adjustable outlet supplied as standard. The coaxial exhaust Ø 60/100 is available as an accessory that can be combined with a pipe extension and a 90° bend diameter 60/100 (adjustable by 360°).Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue exhaust and the separate adjustable exhaust supplied as standard. The Ø 60/100 coaxial outlet is available as an accessory that can be combined with a pipe extension and a 60/100 diameter 90° bend (360° adjustable). The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact and inserting itself in all the replacement installation contexts. The spacer frame allows the boiler to be moved away from the wall by 40 mm, allowing the passage of the pipes in the rear part of the back panel. This accessory facilitates the replacement of the boiler by eliminating the masonry work. New Baxi patented exchanger with single coil in stainless steel with large water passage sections 8-litre oversized heating expansion vessel Easy to use thanks to the control panel equipped with knobs and backlit LCD display Easy installation thanks to the ultra-compact dimensions (700x395x279 mm - including knobs) and low weight (26 kg) Easy replacement of conventional boilers thanks to central flue gas outlet Modulation range 1:5 greater efficiency and silence Arrangement for combination with the Baxi integrated solar system Ø 80 double drain STANDARD Connection to rigid and flexible Ø 50 mm exhaust pipe: solution for restoring flues - total length (exhaust + intake) 35 meters Connection to pressurized collective flues Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO SuperEVOdens 24 S* CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW CLASS A MODEL - ERP Technical specifications o Model: SuperEVOdens 24 S* Energy label specifications according to the European ErP directive o Class A heating energy efficiency o Domestic energy efficiency profile XL Class A o Withdrawal profile: XL Characteristics of heating/DHW operation: o Heating / domestic hot water nominal heat input kW 25.0 o Heating / domestic hot water maximum useful power kW 24.4 o Efficiency at nominal heat input (60/80°C): 97.4% o Efficiency at nominal heat input (30/50°C): 97.1% o Efficiency at 30% at 30°C: 98.9% o Energy efficiency n° ???? o Minimum / maximum heating temperature ** °C 40 / 85 o Expansion vessel capacity (total / useful) l 8.0 / 4.0 o Minimum / maximum domestic hot water temperature °C 35 / 60 o Maximum flow rate (T=25 K) / (T=35 K) l/min 13.9 / 10.0 o Specific sanitary flow rate (T=30 K) *** l/min 11.6 o Total absorbed electric power W 65 o Degree of protection n° IPX4D o Dimensions (HxWxD) mm 803x400x350 o NOx class n° 2 o Power supply: METHANE Main features SuperEVO dens SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution system for heating. Characteristics: o High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) o Copper lamellar primary heat exchanger with large exchange surface and double circulation o Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water o Sanitary plate heat exchanger in stainless steel o High efficiency pump with low energy consumption o Digital control panel with backlit display o Electronic card for: o Adjustment of restart frequency - Adjustable primary circuit thermal inertia disposal - Circulator mode selection - Circulator anti-seize - Antifreeze safety - Chimney sweep function o Integrated automatic by-pass o Immunity to radio interference o Magnetic sanitary flow switch o Absolute heating pressure switch o IPX4D degree of protection Savings and ease of use SuperEVOdens retains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers. Main features High circulation primary exchanger It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators. Heat recovery The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler correctly discharges the condensate. Thermoregulation By connecting the external probe (optional) directly to the boiler, climatic regulation can be used. SuperEVOdens will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home. Eco-design directive After very long negotiations, the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing boilers on the market starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will only have to install models condensing. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: o An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO EVOdens MAX E 25S* CONDENSING BOILER WITH TANK COMPLETE WITH LPG METHANE FUME EXHAUST KIT - NEW ErP Technical specifications Model:ÿEVODENS MAX LPG code: 103021014300 CNG code: 103121021300 Characteristics of heating/sanitary exercises: Heating/sanitary nominal heat inputkW 20.0 / 25.0 Maximum useful power heating / sanitary kW 19.5 / 24.4 Yield name 60ø/80øC % 97.4 Yield min. 60ø/80øC % 97.4 Yield at 30% of the load% 101.5ÿ Energy efficiencynø Minimum / maximum heating temperature**øC 25 / 85 Sanitary minimum / maximum pressurebar 0.3 / 8.0 Sanitary expansion vessel capacity (total) l 2.0 Boiler nominal capacity l 45 Boiler useful capacity l 41 Maximum flow rate (T=25 K) / (T=35 K) l/min 15.1 / 10.8 Voltage / Power at nominal heat input V ~ / W 230 ~ / 95 Power at minimum thermal capacity W 9 Power at rest (stand-by) W 5 Degrees of protection nø IPX4D Boiler water content 3.5 l Dimensions HxWxD:ÿ900x600x400; 70.0 Characteristics EVO DENS MAX E The EVODENS MAX E boilers with porcelain-glass storage tank were designed to satisfy the most demanding users: large and immediate production of domestic hot water despite being a boiler of contained dimensions. The storage tank, together with the latest generation primary condensing exchanger, ensure continuous supply of domestic water in service at the desired temperature. For this reason, EVODENS MAX E boilers are the ideal solution for the comfort of the whole family. Features:ÿ High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary and condensing exchanger in stainless steel with plastic coatings to offer maximum resistance to corrosion Total premix burner, built in stainless steel (ClassÿNOx 5) High efficiency pump with low energy consumption, ErP Ready Maximum power adjustable according to the needs of the system Glass-porcelain steel boiler with convenient inspection and cleaning flange Magnesium anodal dismountable External insulation of the boiler in polyurethane foam Two-litre sanitary expansion tanks, as standard Degrees of protection IPX5D Installability in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel with graphical interface and keys Digital pressure reading by pressure transducer Arrangement for external probe remote control Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems Four-controllers Summer / winter / off selector Heating temperature regulator DHW temperature regulator Digital pressure reading DHW and heating temperature visualization from the display Fault diagnostics display, fault history block status View recommended fills fill guide View months left until annual maintenance is due External temperature display (with external probe connected) and signaling of external probe connected and ÿK value set Flame modulation display Visualization of SaviSOLCONTROL solar control unit connected to EVODENS MAX E, active solar pump and solar integration Sanitary comfort function selectable via dedicated key Ingressdirectal INFO menu dedicated to the user STANDARD: Boiler support bracket and paper template Boiler power cable Condensate collection siphon Quick instruction to the user OPTIONALS: Paper template remote control External probe kit Tap kit (system boiler connection pipes, gas and sanitary water taps and quick couplings) Ecodesign Directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

SAUNIER DUVAL THEMAFAST 4 CONDENSING 35 kW METHANE GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features NB: THIS MODEL IS USED EXCLUSIVELY TO CNG, BUT IT CAN BE CONVERTED TO LPG FREE OF CHARGE THROUGH AN AUTHORIZED SAUNIER DUVAL SERVICE CENTER Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Domestic hot water production technology: AquaspeedFAST® Heating Nominal power P min/max heating 80/60 °C: kW 9.3/32.8 Partial load efficiency 30% 40/30 °C %: 109.2 Sanitary Rated power min/max (60 °C): kW 9.3/32.8 Specific flow rate (∆T=25 K): l/min 20 Continuous flow rate (∆T=30 K): l/min 17 Min/max DHW temperature: 38/60 °C Electrical characteristics Total absorbed electric power: W 143 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (hxwxd): 740 x 418 x 344 mm CNG code (G20) - 10018898 METHANE version THEMAFAST 4 CONDENSING ThemaFast 4 Condensing boilers can count on the exclusive Aquaspeed FAST® system for the production of domestic hot water combined with condensing technology which ensures immediate and continuous availability of domestic hot water for superior comfort by eliminating unnecessary waiting times. The range includes 3 models of 25.30 kW and 35 kW. Characteristics: Energy classification 4 stars ****(92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars ***(EN 13203-1), thanks to the exclusive Aquaspeed FAST® technology with sanitary stainless steel plate heat exchanger and integrated micro-accumulator which allows immediate delivery of hot water thanks to the available reserve. Control panel with backlit digital display, easy to use: the user can easily select the desired functions and temperatures. Solar Easy: all models in the ThemaFast 4 Condensing range are compatible with all solar systems thanks to a series of solar kits. The small dimensions make all ThemaFast 4 Condensing models perfect both for replacement and for installation in newly built systems. Continuous domestic hot water (DHW) production up to 20 l/min Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating system antifreeze function Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BIASI rinNOVA COND XE 25S CONDENSING BOILER COMPLETE WITH LPG METHANE FUME EXHAUST KIT - NEW ErP Technical specifications Model: rinNOVA COND XE 25S Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Thermal powerÿuseful sanitaryÿ(80/60ø C)ÿkW (kcal/h)ÿ26.6 (22,876) Heating capacityÿuseful heatingÿ(80/60ø C)ÿkW (kcal/h) 21.2 (18,232) Heat input(*)ÿnominalÿkW (kcal/h)ÿ25.0 (21,500) Heat inputÿminimumÿkW (kcal/h)ÿ6.0 (5,159) Sanitary flowÿt =25øKÿl/min 15.9 Dimensions (HxWxD) 700x400x290 mm Main features renew COND Xÿ RinNova Cond X The BIASI premixed condensing range completes: perfectÿfor underfloor systems for radiator systems, the compact condensing boiler that ensures high yields, low consumption and respect for the environment. Availableÿfor heating and domestic hot water production, in powers of 25 and 35 kW and forÿheating only in powers of 16, 25 and 35 kW. Characteristics: High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfortÿÿ(EN 13203) Primary and condensing exchanger in stainless steel with plastic linings to offer maximum resistance to corrosion Total premix burner, built in stainless steel (class NOx 5) Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Maximum power adjustable according to the needs of the system Degrees of protection IPX5D Installability in a partially protected place Integration with BIASI solar systems using a solar kit digital control panel with backlit display Digital pressure reading by pressure transducer Arrangement for external probe remote control Four-controllers Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital pressure reading DHW and heating temperature visualization from display Display of fault diagnostics, fault history block status View recommended fill View annual maintenance expiry The display operates according to the modes: 1. INFO. Inf mode displays the following information: External temperature (in case of connected external probe) K value (in case of connected external probe) Sanitary / heating temperatures chosen by the user Smoke temperatures. 2. PROGRAMMING. The programming mode allows you to modify the boiler parameters. In chimney sweep mode it is possible to test the boiler and make adjustments to the gas valve. RinNova Cond XE: Adjustable maximum power The adjustable maximum useful heating power parameter meets the needs of modern construction without compromising comfort required in the production of domestic hot water. In fact, this function makes it possible to limit the maximum useful power in heating, independently of the useful domestic power. Hot water even with the sun RinNova Cond XE for heating and hot water production: the sanitary exchangerÿin stainless steel combined with the electronic management and low inertia of the primary exchangerÿdetermine excellent performance even in the production of domestic hot water.ÿFor the production of domestic hot water RinNova Cond XE can be combined with BIASI solar systems using specific solar kit (optional). The boiler cuts in only when necessary, making the most of solar energy and guaranteeing the comfort required by the user. Included in delivery: Boiler support bracket and paper template Boiler power cable Condensate collection siphon Quick instruction to the user. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres or As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less