icon Baxi Condensing Boiler Evolution Prime 26 Kw Methane Or LPG Complete With Fume Exhaust Kit | CaldaieMurali

Baxi Condensing Boiler Evolution Prime 26 Kw Methane Or LPG Complete With Fume Exhaust Kit

Description

Technical features

  • Model: EVOlution Prime 26
  • Product code : A7715732
  • Typology: Condensation
  • Installation: Recommended for replacing conventional boilers
  • Power supply: methane or LPG
Energy efficiency
  • Energy efficiency class in heating: A
  • DHW energy efficiency class: A
  • Load profile : XL

Performance

  • DHW nominal heat input: 26.7 kW
  • Nominal heating heat input: 20.6 kW
  • Useful heat output at 30% rated heat output and low temperature regime: ** P1 6.7 kW
  • Emissions of nitrogen oxides NOx : 38 mg/kWh
  • Minimum operating temperature : -5°C
  • Heating expansion vessel capacity: 8 litres
  • Heating circuit water temperature adjustment: 25° ~ 80°C
  • Sanitary water temperature adjustment: 35° ~ 60°C
  • Sanitary water production ΔT 25°C : 13.8 l/min
  • DHW circuit minimum water flow rate: 2 l/min
  • Minimum heating circuit water pressure: 0.5 bar
  • Degree of protection : IPX5D

Dimensions

  • Dimensions (HxWxD): 700x395x279 mm
  • Weight : 26.0 Kg

EVOlution PRIME Wall mounted condensing gas boilers ideal for replacing conventional boilers

The new range of EVOlution PRIME condensing boilers has been equipped with an innovative Baxi patented exchanger. Single Ø 28 mm self-cleaning stainless steel coil, with wide passages.

  • Significant reduction of load losses
  • Greater thermal efficiency
  • Reduction of any deposits and therefore less risk of clogging
  • Ease of maintenance
The range of EVOlution PRIME condensing boilers is divided into three models, 26 and 30 kW for heating and instantaneous domestic hot water production: the 26 Mago model is equipped with the Baxi Mago SERIES, while it remains an accessory for the other two models. EVOlution PRIME has been designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A++ to G and which will pass from A+++ to F from 09/26/2019. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products.

The advantages of the EVOlution PRIME condensing boiler

Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce installation time. The EVOlution PRIME has the same center distances of the hydraulic connections of the conventional BAXI boilers to be replaced. Front access to the electrical connection also speeds up connection times.

Lower energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory.

Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue outlet and the separate adjustable outlet supplied as standard. The coaxial exhaust Ø 60/100 is available as an accessory that can be combined with a pipe extension and a 90° bend diameter 60/100 (adjustable by 360°).Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue exhaust and the separate adjustable exhaust supplied as standard. The Ø 60/100 coaxial outlet is available as an accessory that can be combined with a pipe extension and a 60/100 diameter 90° bend (360° adjustable). The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact and inserting itself in all the replacement installation contexts. The spacer frame allows the boiler to be moved away from the wall by 40 mm, allowing the passage of the pipes in the rear part of the back panel. This accessory facilitates the replacement of the boiler by eliminating the masonry work.

  • New Baxi patented exchanger with single coil in stainless steel with large water passage sections
  • 8-litre oversized heating expansion vessel
  • Easy to use thanks to the control panel equipped with knobs and backlit LCD display
  • Easy installation thanks to the ultra-compact dimensions (700x395x279 mm - including knobs) and low weight (26 kg)
  • Easy replacement of conventional boilers thanks to central flue gas outlet
  • Modulation range 1:5 greater efficiency and silence
  • Arrangement for combination with the Baxi integrated solar system
  • Ø 80 double drain STANDARD
  • Connection to rigid and flexible Ø 50 mm exhaust pipe: solution for restoring flues - total length (exhaust + intake) 35 meters
  • Connection to pressurized collective flues
  • Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary)

Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Baxi Condensing Boiler Evolution Prime 26 Kw Methane Or LPG Complete With Fume Exhaust Kit

Product form

Technical features Model: EVOlution Prime 26 Product code : A7715732 Typology: Condensation Installation: Recommended for replacing conventional boilers Power supply:... Read more

€880,00 Incl. VAT

    Description

    Technical features

    • Model: EVOlution Prime 26
    • Product code : A7715732
    • Typology: Condensation
    • Installation: Recommended for replacing conventional boilers
    • Power supply: methane or LPG
    Energy efficiency
    • Energy efficiency class in heating: A
    • DHW energy efficiency class: A
    • Load profile : XL

    Performance

    • DHW nominal heat input: 26.7 kW
    • Nominal heating heat input: 20.6 kW
    • Useful heat output at 30% rated heat output and low temperature regime: ** P1 6.7 kW
    • Emissions of nitrogen oxides NOx : 38 mg/kWh
    • Minimum operating temperature : -5°C
    • Heating expansion vessel capacity: 8 litres
    • Heating circuit water temperature adjustment: 25° ~ 80°C
    • Sanitary water temperature adjustment: 35° ~ 60°C
    • Sanitary water production ΔT 25°C : 13.8 l/min
    • DHW circuit minimum water flow rate: 2 l/min
    • Minimum heating circuit water pressure: 0.5 bar
    • Degree of protection : IPX5D

    Dimensions

    • Dimensions (HxWxD): 700x395x279 mm
    • Weight : 26.0 Kg

    EVOlution PRIME Wall mounted condensing gas boilers ideal for replacing conventional boilers

    The new range of EVOlution PRIME condensing boilers has been equipped with an innovative Baxi patented exchanger. Single Ø 28 mm self-cleaning stainless steel coil, with wide passages.

    • Significant reduction of load losses
    • Greater thermal efficiency
    • Reduction of any deposits and therefore less risk of clogging
    • Ease of maintenance
    The range of EVOlution PRIME condensing boilers is divided into three models, 26 and 30 kW for heating and instantaneous domestic hot water production: the 26 Mago model is equipped with the Baxi Mago SERIES, while it remains an accessory for the other two models. EVOlution PRIME has been designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A++ to G and which will pass from A+++ to F from 09/26/2019. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products.

    The advantages of the EVOlution PRIME condensing boiler

    Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce installation time. The EVOlution PRIME has the same center distances of the hydraulic connections of the conventional BAXI boilers to be replaced. Front access to the electrical connection also speeds up connection times.

    Lower energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory.

    Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue outlet and the separate adjustable outlet supplied as standard. The coaxial exhaust Ø 60/100 is available as an accessory that can be combined with a pipe extension and a 90° bend diameter 60/100 (adjustable by 360°).Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue exhaust and the separate adjustable exhaust supplied as standard. The Ø 60/100 coaxial outlet is available as an accessory that can be combined with a pipe extension and a 60/100 diameter 90° bend (360° adjustable). The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact and inserting itself in all the replacement installation contexts. The spacer frame allows the boiler to be moved away from the wall by 40 mm, allowing the passage of the pipes in the rear part of the back panel. This accessory facilitates the replacement of the boiler by eliminating the masonry work.

    • New Baxi patented exchanger with single coil in stainless steel with large water passage sections
    • 8-litre oversized heating expansion vessel
    • Easy to use thanks to the control panel equipped with knobs and backlit LCD display
    • Easy installation thanks to the ultra-compact dimensions (700x395x279 mm - including knobs) and low weight (26 kg)
    • Easy replacement of conventional boilers thanks to central flue gas outlet
    • Modulation range 1:5 greater efficiency and silence
    • Arrangement for combination with the Baxi integrated solar system
    • Ø 80 double drain STANDARD
    • Connection to rigid and flexible Ø 50 mm exhaust pipe: solution for restoring flues - total length (exhaust + intake) 35 meters
    • Connection to pressurized collective flues
    • Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary)

    Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 30.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane/LPG
    • marca: BAXI
    • metri quadri : 150
    • modello: PRIME_26EVO
    • potenza in kw: 26
    • potenza nominale: 26
    • superficie riscaldabile mq: 150
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account