AVAILABLE TO ORDER IMMERGAS MAIOR NIKE GAS BOILER 24 Kw LPG OPEN CHAMBER Technical features Energy class in heating: C; Sanitary energy class: B; Heating performance: Max nominal heat input (kcal/h) 25.9 (22,307) kW Nominal heat input min. in heating (kcal/h) 10.7 (9,185) kW Useful thermal power (min./max) (kcal/h) 9.4/23.5 (8.084/20.210) kW; Healthcare services: Nominal heat input min. in DHW (kcal/h) 8.1 (6,928) kW; Useful heat output min. in sanitary (kcal/h) 7.0 (6,020); Nominal heating expansion vessel capacity 10.0 (8.0) litres; Electrical protection degree IP X4D; Power supply: LPG. General characteristics The MAIOR NIKE boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit LCD display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Designed to meet all the needs of its customers, the Immergas meior Nike boiler respects the environment (ErP), as well as guaranteeing the functions that preserve the integrity of the generator over time, it also has the function of managing the systems with solar system, capable of delaying ignition to optimize the reading of the incoming water coming from the solar boiler. This function is even more performing with the aid of the DHW inlet probe kit. Finally, to facilitate installation, it is made up of unchanged attachments to ensure that it is replaced with other instantaneous wall-hung models in the Immergas range. Dimensions (HxWxD): 785x440x340; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO evoDENS HE 25S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG LPG FUME EXHAUST - NEW ErP;ÿSTAINLESS STEEL wall-mounted condensing boilerÿ Technical specifications Model:ÿevoDENS HE Product codeÿLPG: 103021021000 Product codeÿLPG: 103121029000 Technical features: Heating/sanitary nominal heat inputkW 20.0 / 26.0 Yield name 60ø/80øC * % 96.7 Yield min. 60ø/80øC * % 92.4 NOx class no. 6 Minimum / maximum heating temperature****øC 25 / 80 Minimum / maximum heating pressurebar 3.0 / 0.3 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Maximum flow rate (T=25 K) / (T=35 K) l/min 14.4 / 10.3 Specific sanitary flow rate (T=30 K) ***** l/min 12.0 Voltage / Power at nominal heat input V~/ W 230/100 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxDÿmm 700x400x290; 32.7 Kgs Boiler water content l 2 Main features EvoDENS HE The new range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger Evodens HEÿis the new SAVIO range ofÿwall-mounted condensing boilersÿ: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large displays. Available in versions for heating and domestic hot water production and for heating onlyÿEvodens HEÿpresents a complete range of powers, 25 and 35 kW combi models and 25 and 35 SV models, in the same extremely compact dimensions (700 x 400 x 290 mm).ÿ Evodens HEÿhas the strong point in the innovative heat exchanger designed to provide high yields that last in the digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire SAVIO condensing range, ÿEvodens HEÿallows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. MAIN FEATURES: High yields (in compliance with yield directive 92/42ÿCEE and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary condensing exchanger in stainless steelÿwith aluminum linings to offer maximumÿresistance to corrosion Total premix burner, built in stainless steel (Class NOx 5) Modulation 1:10 Methane also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tanks High efficiency PWM pump with low power consumption variable speed Maximum power adjustable according to the system Degrees of protection IPX5D Can be installed in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel Digital pressure reading Arrangement for remote control of external probe Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems. High circulation single coil primary exchangerÿSavi produces the new Steelcoil compound exchanger with a stainless steel spiral enclosed in an aluminum shell. Thanks to the large exchange surface of the coil, greater thermal efficiency is guaranteed with less loss of charge and easier cleaning. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product which can be used on new systems but also on old systems in the case of renovations. Steelcoil integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the monspira. Does the absence of parallel circuits guarantee an easy cleaning operation? of the exchanger and the elimination of any air present in the system circuit. CONTROL PANEL Summer/winter/off selector Heating temperature regulator Sanitary temperature regulator Digital pressure reading Domestic hot water and heating temperature visualization from the display Display of fault diagnostics, fault history block status Refill ViewÿRecommended Refill Guide Display of months remaining until annual maintenance is due External temperature displayÿ(with external probe connected) andÿindication of external probeÿconnected and K value set Flame modulation display Visualization of SavioÿSOLCONTROL solar control unit connected to EVODENSÿHE, active solar pump and solar integration DHW comfort functionÿselectable by means of a dedicated keyÿand programmable Ingressdirectl the INFO menu dedicated to the user. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. EVODENS HE will adapt the water temperature of the system to the external climatic conditions, guaranteeing the achievement of the desired room temperature without waste and optimizing consumption. By using climatic regulation, the regulation efficiency also rises, giving greater value to your home. Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available In case of unavailability, the new DIVATECH D LNC 30 model will be supplied Technical features Model : Divaproject C30 Power supply: methane Performance Energy efficiency class in heating: C DHW energy efficiency class: A Heating nominal heat output : 11.5 ~ 33.0 kW Heat output : 9.7 ~ 30.0 kW Domestic useful thermal power: 30.0 kW Efficiency : 91 % Maximum production of domestic hot water Δt 25°C : 17.2 l/min Maximum production of domestic hot water Δt 30°C : 14.3 l/min Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 30.0 Kg Ferroli Divaproject Boiler Wall mounted boilers with instantaneous DHW production with double exchanger, open chamber, natural draft The Divaproject c24 by Ferroli is the cheapest solution for replacing open chamber boilers. Built to be installed outdoors in partially protected places and prepared for integration with a solar panel system. It has an excellent value for money and is entirely Made in Italy with a 2-year guarantee . The cheapest in its category Arrangement for solar systems Eco-comfort system for rapid domestic hot water production High efficiency low consumption circulator (class A) Ideal for residential homes up to 120 m2 2 Year Warranty Divaproject is a heat generator for heating and instant domestic hot water production. The series has been designed in each of its components to have top performance in its category while maintaining characteristics of simplicity and compactness. The control electronics allow for easy and functional combination with solar collector systems. The series includes two models: C24 and C30 The boiler is designed to operate on natural gas and LPG or even on propane air by means of a special transformation. The efficiency of Divaproject is the maximum for its category, certified at 3 stars according to the 92/42 EEC Directive for energy classification Components Expansion tank Combustion chamber Copper primary exchanger Atmospheric burner Sanitary exchanger Modulating gas valve Motorized 3-way valve Boiler control Control panel and functions Divaproject's control and management electronics allow the user to customize the operation of the appliance in order to manage environmental comfort according to one's needs. The control panel with the adjustment knobs makes the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive Remote control "ROMEO" timer Divaproject boilers can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. The ROMEO series consists of 4 models, respectively with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With ROMEO you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. With solar systems Sun Easy function Divaproject boilers have been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously controls the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user Comfort and Safety Functions Eco-Comfort function In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Antifreeze function Even in stand-by mode, i.e. in the absence of a heat request, if a water temperature of 5°C is detected, it activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Post-circulation device All models are equipped with this particular timed device which allows, after the burner has been switched off in heating mode, to recover all the heat accumulated due to thermal inertia from the exchanger, transferring it to the radiators and therefore to the rooms to be heated Circulation anti-blocking device After 24 hours of inactivity, the boiler circulator is automatically started for about 5 seconds to prevent it from blocking after a long period of inactivity. Strengths > Compact geometry primary heat exchanger entirely in copper > Instant production of domestic hot water with dedicated plate exchanger > Simple and complete control panel, LED user interface > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system > Combustion chamber in anti-corrosion aluminized sheet, internally insulated with ecological fiber and burner in AISI 304 stainless steel > Can be combined with the modulating remote timer control > Casing painted white by anaphoresis with epoxy powders > Compact dimensions and low weight > Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card > Adjustable post-circulation after the heating phase > ECO/COMFORT system for rapid production of domestic hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

Overview FONDITAL DELFIS KC 28 LPG CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP 2016: Wall-mounted pre-mixing condensing boiler with instantaneous production of domestic hot water, sealed chamber. Technical specifications Characteristics of heating/sanitary exercises: Forced draft sealed chamber Nominal heat input: 26.4 kW Rated heat output: 27.9 kW Efficiency at maximum power: 96.4% Efficiency 30% of load: 105.4% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production t 30øC: 15.0 l/min Sanitary pressure min-max: 0.5 - 6ÿbar Domestic hot water/heating maximum temperature: 62/83øC Expansion tank capacity: 9 l Heating consumption nominal power Metanm3/h 2.79 Sanitary consumption rated power Metanm3/h 3.22 Total absorbed electric power: 84 W Degrees of protection of the quadrielectric:ÿIPX4D Dimensions (hxlxp)ÿ700x400x250ÿmmÿ; 33.5kg LPG fuel supply Warranty: 2 years Heating energy efficiency Class Aÿÿ Sanitaryware energy efficiencyprofilXL Class A Features list DELPHIS KC Wall-hung condensing premixing boiler with sealed chamber, with instantaneous production of domestic hot water The boiler, unlike the storage ones, allows instantaneous production of domestic hot water and uses condensing technology which allows a reduction in consumption, as well as low emissions of pollutants. Plus:ÿ Ultra compact Modulation ratio 1:9 User interface with LCD Boiler room temperature adjustment with external probe Supplementary relay for the management of 2 heating zones 9 liter expansion tanks Boiler change kit Features:ÿ Heat exchanger in thermopolymers and stainless steel Total premix burner Modulating gas valve with constant ratio/gas Combustion fan with variable speed Classification of performance according to 92/42/EEC: NOx emission class (EN 297): 5 3-speed circulator with built-in deaerator Availability of the boiler change kit as accessories Modulation wide range 1:9 Electronic ignition, ionization flame detection NTC temperature probes on the sanitary on the heating LCD interface with diagnostics Sanitary plate heat exchanger in stainless steel Motorized diverter valve Bypass Connection preparation:ÿ External probe 2 ambient probes CommandRemotOpen Therm Zone heating management card for high and low temperatures WHAT IS THE REGULATION? ERP A concrete help for our planet.ÿThe application of the Ecodesign and Ecolabeling regulations The European Union, as a result of the values ​​expressed by the Kyoto Protocol, sets itself an ambitious goal, known as the Pianeurope20, 20, 20 climate-energy goal. By 2020 the intention is to reduce greenhouse gas emissions by 20%, as well as energy consumption and to make sure that 20% of Europe's total energy demand comes from renewable energy sources. The energy consumed by buildings is estimated to be around 40% of total energy consumption. Of which 80% used for heating and domestic hot water: Heating67% Lighting and appliances 15% Hot water 14% kitchen 4% All combined heating only boilers must be equipped with High Efficiency circulators. Heating appliances without high-efficiency circulation pumps cannot be placed on the market after 1 August 2015. From 1 August 2015, high-efficiency circulation pumps may still be placed on the market. Starting fromÿ26 September 2015ÿall heat generators for space heating, appliances for the production of DHW and systems consisting of several of these appliances, with a Pn 400 kW for eco-design and with a Pn 70 kW for labelling, in order to be placed on the market, they must comply with the regulations issued by the European Union, indicated with the term ErP - Energy Related Products. The introduction of the ÿEcodesign Directiveÿ of 26 September 2015 also entails the ban on the placing on the market of almost all traditional atmospheric boilers The ErPÿ label for space heaters highlights the respective energy class on a scale from ÿA ++ÿ to Gÿ (for heat pumps up to D, while for accumulators from A to G). Starting from August 2019 a further restriction of the class will be applied, namely A +++ to D, for accumulators from A + to G, while for heat pumps (at low temperature) the label must carry information on the climatic zone. Fondital supplies all products subject to this standard with a label and a technical data sheet that distributors, retailers and specialized installers must use to define the products. Official labeling can only take place from 26 September 2015. PRODUCT LABEL In the product energy label, information on the efficiency characteristics is reported: I. brand name of the supplier II. model identifier III. reference to space heating and domestic hot water functions IV. efficiency class V. nominal heat output of the appliances YOU. sound power level in dB (sol heat pumps) VII. possible operation during dead hours (only heat pumps) The label is made available by Fondital and it is the responsibility of the distributors to make it clearly visible on each device at the point of sale, (soled only after 26 September 2015). SYSTEM LABEL All the combinations of appliances that will be installed, called systems, must also be subject to the energy classification through the system label. For example, a condensing boiler and a solar panel connected to a storage tank are considered a system subject to EcLabelling. The sameÿ system, composed of the previous components, accompanied in addition by a regulation device such as a chronothermostat, must be added to the system as it can improve the energy classification to be declared on the label. The calculation of the energy efficiency of the system must be provided by filling in a data sheet prescribed by the EC regulations and called a fiche. The energy classification of a system can be defined both by the manufacturer of the various components (e.g. pacchetticompletSulpack Easy) and by an installer retailer who builds a system with components supplied by different manufacturers. In the latter case, the installing retailer will have to rely on the generator label and on the information given in the technical data sheets supplied by the manufacturers of the individual generators and components to calculate the energy class of the system. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

IN THE ABSENCE OF THE PRODUCT THE NEW CARES S 24 MODEL WILL BE SHIPPED Technical features Product code: 3301119 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min: Kw 23.5/5.5 Max/min nominal heat input in domestic hot water: Kw 23.5/5.5 Useful thermal power in heating: max/min: Kw 22.9/5.3 Efficiency at nominal heat input (60/80°C): 97.5% Efficiency at nominal heat input (30/50°C): 103.9% Efficiency at 30% at 30°C: 108.2% Max/min heating temperature (high temperatures): 82/35°C Max/min heating temperature (low temp.): 45/25°C Max/min DHW temperature: 60/36 °C Sanitary water production (DT=25°C): lt./min. 13.1 Specific flow rate (first 10' with DT=30°C): lt./min. 10.5 Total absorbed electric power W 87 Degrees of protection of the electrical system IP X5D Dimensions (HxWxD) mm 745 x 400 x 319 Power supply: METHANE General characteristics CARES PREMIUM EU Simplicity, compact dimensions and good efficiency The Ariston Cares Premium compact wall-mounted condensing boiler combines technology and ease of installation thanks to its small size. It is made in the heating and domestic hot water production version, with 24 kW of power and is set up for integration with the system configuration via the new Bridgenet® Bus communication protocol. Designed and built in Italy, the Cares Premium condensing boiler also provides for the management of solar energy systems and is equipped with antifreeze, anti-limescale protection and anti-blocking circulator. Characteristics: Compact condensing boiler Aluminum-silicon condensing exchanger Mini-LCD display Modulation ratio 1:4 Silent and compact BusBridgeNet® communication protocol Smoke outlet 80, 60 mm NEW models only: Installation in partially protected places MET/LPG operation with standard kit Ecodesign directive: from 2015 only new condensing boilers After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER BERETTA MYNUTE S 28 CAI LPG OPEN CHAMBER - NEW ErP Technical features Product code: 20102088 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat output: 28 kW Quantity of hot water with Δt=25°C: 16 l/min Dimensions (hxwxd) mm 740 x 452 x 336 METHANE power supply Legend: C (heating + sanitary water), A (Open Room) I (electronic ignition, ionization control). MYNUTE S - ErP The benchmark for standard wall mounted boilers. The innovation: Designed to facilitate replacement The new Mynute S, a point of reference in the range of Beretta Clima standard wall-mounted boilers, is specifically designed to make installation particularly easy, especially when replacing with other products. The models in the Mynute S range comply with Legislative Decree 311/06. The reliable: Technology at the service of quality The new Mynute S offers highly reliable combustion and electronics and boasts the high degree of electrical protection IPX5D. The range is therefore characterized by safety and solidity thanks to the components with which it is made which belong to a high quality standard. The boiler features the most innovative safety devices: control systems that monitor the presence of the flame, on the correct evacuation of fumes, on temperatures and pressures. The anti-blocking cycles of the circulator and the board anti-freeze system allow the appliance to last longer over time. The new Mynute S also boasts the Survivor Function which allows it to continue to function in the event of failure of the sanitary NTC probe. The elegant: A modern style that integrates with any environment The new Mynute S is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to perform all the functions necessary for using the boiler. Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI20) Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion vessel Simple and intuitive digital display Arrangement for climatic thermoregulation (optional external probe) Can be interfaced with the REC 08 Remote Control Panel (optional) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER SIME BRAVA ONE 25 OF LPG - ErP Technical features. For heating and domestic hot water production Open chamber with natural draft Heating energy efficiency class: C Nominal thermal power: 8.7÷23.0 kW Efficiency class (EEC 92/42): ** Continuous sanitary flow: 10.7 l/min Dimensions (h x w x d): 700 x 400 x 250 mm; 34kg METHANE version General characteristics GOOD ONE OF ERP CONVENTIONAL - Instant (2 stars) Characteristics: Monothermal wall-mounted boiler Extremely compact dimensions Three-piece cloak DHW management with double probe Retroactive combustion control with electronic gas valve 2 open chamber versions with 23.0 kW domestic hot water production Integrated climatic regulation Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: BASICA DGT 24A Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.6 kW Heating/DHW maximum useful power: 24.1 kW Yield name 60°/80°C: 90.6% Yield at 30% load: 89.6% Energy efficiency stars: (dir 92/42/EEC) ** NOx class n° 3 Weighted NOx: 135 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25K) / (ΔT=35K): 13.8/9.9 l/min Specific sanitary flow rate (ΔT=30 K): 11.5 l/min Voltage / Power at nominal heat input V~/ W 230~/56 Degree of protection n° IPX4D Minimum/maximum smoke temperature: 83/108°C Extremely compact dimensions hxwxd: mm 703x400x325 ; 28.7kg CNG or LPG power supply ( Select in the drop down menu ) General characteristics BASIC DGT Basica DGT is the range of BIASI boilers designed to meet modern housing needs that require reliable, compact and high performance products. The Basica DGT range includes open chamber boilers with power ratings of 24 kW and 28 kW. The Basica DGT series is suitable for heating and domestic hot water production. Basica DGT has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with BIASI solar systems using a solar kit Digital control panel with display. The electronic card allows you to: - Adjust the ignition pressure - Adjust the restart frequency - Manage the post-circulation of the high efficiency pump - View fault diagnostics and lockout status. Also available: - Boiler antifreeze safety - Disposal of primary circuit thermal inertia. Primary exchanger Basica DGT is a high efficiency boiler: the most compact exchanger, with reduced fin pitch to increase their number and ensure maximum efficiency. The large heat exchange surface is guaranteed by the helical section of the passage pipes and by the lamellar structure. The high exchange efficiency is guaranteed by the double circulation in counter flow. The exchanger is made of copper with a protective coating resistant to high temperatures. Secondary exchanger Basica DGT is available in a mixed version for heating and domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar  Basica DGT can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Reliability and security Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model BASIC AND 24A LPG OPEN ROOM Energy efficiency Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Performance Useful thermal power: 24.1 kW Energy efficiency stars: (dir 92/42/EEC) *** Maximum flow rate (Δt =25 °C): 13.8 l/min LPG power supply Characteristics High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with BIASI solar systems using a solar kit Traditional control panel with knobs and LEDs. Dimensions hxwxd: mm 700x400x325

Read more less

The boiler will be supplied with methane, using the appropriate kit it can be transformed for operation with LPG. Contact the local assistance center in advance. Technical features Model : atmoTEC Plus VMW 240/5-5 Product code : 0010016274 Power supply: LPG Performance Nominal thermal power in sanitary mode: 24.0 DHW nominal heat input kW 26.7 Energy efficiency class in heating: C Sanitary energy efficiency class: B Sanitary load profile : XL NOx class : 3 Performance stars : ★★ Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 10 litres Fumes discharge temperature : 84° ~ 117°C Sound power : 49.5 dB(A) Dimensions and weight Dimensions (HxWxD): 800x338x440 mm Weight : 40.0 Kg Open flue boiler Vaillant atmoTEC Plus Standard wall mounted boiler for heating and domestic hot water Three star comfort hot water DHW pre-heating function Can be installed outdoors, protected up to -10C 10l expansion vessel High efficiency modulating pump. Energy efficiency class up to B depending on the model. For more information, see the technical data sheet The plus range was designed by Vaillant to meet all comfort needs for the production of hot water and for heating. The new atmoTEC plus series with open chamber models with natural draft features the domestic hot water pre-heating function; this function satisfies the customer's needs by reducing production times and immediately provides comfort. With a renewed design and their reduced dimensions, 80 x 44 x 34 cm, they can be placed in any room and easily housed in wall units or cover cabinets. Vaillant does not stop at the design but continues in the development and research of the best performance for the plus series obtaining exceptional results in terms of silence and ease of installation. Vaillant plus series boilers are at the top of performance in terms of efficiency, temperature constancy and low maintenance costs, thanks to the high quality of the components. A novelty in response to the ErP regulation is the introduction of a high efficiency pump (class A). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX URBIA GREEN Ebus2 35 EU CONDENSING BOILER Cod. 3310409 COMPLETE WITH FUME EXHAUST KIT -NEW ErP 2015: Wall mounted condensing boilers with 4 liter mini-accumulator. Technical specifications Product code: 3310409 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat output max/min (Hi) Qn:ÿ31/3,5ÿkW Useful heating power80§ C/ 60§ C max/minÿ30.3/3.4ÿkW Useful heating power50§ C/ 30§ C max/minÿ33/3,6ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ34.5/ 7ÿkW Efficiency at nominal heat input:ÿ97.7% Efficiency 30% of nominal heat input:ÿ108.7% Energy efficiency stars: (dir 92/42/EEC) **** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Port. specific in healthcare (10 min. with T= 30øC): 16.5 l/min Hot water flow rate at T 25§ C: 19.3 l/min Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ745 x 440 x 445ÿ; 46kg METHANE power supply or Features list URBIA GREEN Ebus2 EU Urbia Green is the ideal solution for all homes where the best performance is required. It is a concentration of advantages in terms of sanitary comfort with reduced dimensions and consumption. Thanks to condensing technology and integration with solar systems, it maximizes energy savings and the 4-litre sanitary reserve satisfies the needs of the most demanding users. Sanitary comfort Mini-accumulintegrated in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard. Flow rate from 14.6 to 19.3 l/min with T = 25§C. DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very low. DHW programmer to control the tank heating time slots Eco-Delta System: DHW load system with 4 liter reserve to further improve the comfort of DHW production and new ecological functions which allow you to save energy in DHW mode. Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. SRA function, automatic boiler regulation system according to heating requirements. Modulation wide range, from 10% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. Pressure sensor of the heating circuit with visualization on LCD display. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature. Arrangement for integration into a heating system via the newÿEbus2 communication protocolÿ(boilers, solar, system management modules, modulating thermoregulation accessories). Multifunction LCD display with display: history, self-diagnosis, operating temperature. Filling taps integrated in the boiler. Convenience of installation use Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 25% energy savings in combination with Expert Control and the SRA function. Final 35% energy savings combine and Expert Control, the SRA function, the external probe and the radiant floor. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER VAILLANT AtmoTEC PRO VMW 240/5-3 METHANE OPEN CHAMBER - ErP Technical features For heating and domestic hot water production Open chamber with natural draft DHW nominal heat input kW 24 ErP energy class (heating and DHW): class C/B Performance stars (according to Dir. 92/42CEE) - *** Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars (prEN 13203) - ** Expansion tank capacity: 10 l Dimensions (hxpxl) mm 800 x 338 x 440 Code: 0010016269 Version: CNG or LPG General characteristics AtmoTEC PRO Standard wall mounted boiler for heating and domestic hot water Sanitary comfort even with low flow rates Intuitive display and simplified adjustments Reduced electricity consumption Suitable for outdoor installations down to -10°C High efficiency pump. Energy efficiency class C/B The atmoTEC pro VMW (heating and DHW production) are available in powers from 24 kW. atmoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. Its simplicity of regulation makes it the ideal boiler for all users. AtmoTEC pro is equipped with an extremely simple interface with plain text and backlit display. The reduced dimensions of atmoTEC pro VMW 80cm high, 44cm wide and 35cm deep (identical to the previous version) allow installation in any environment. A new high-efficiency pump and new electronics allow atmoTEC pro to consume very little electricity, guaranteeing considerable savings throughout the year. Ecodesign Directive (ErP) 2015 How to be ready for new EU legislation What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed.   ErP and ELD: what do they mean and how are they different?   ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: Category 1 Includes space heating appliances: electric, gas, oil, combi boilers, heat pumps and cogenerators up to 400 kW. Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres.   ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, it is possible to increase the energy classification of the system which will be calculated by the installer and indicated on the package label.   Let's take a look at the new labels...   When and how will the new rules apply?   On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products     Why push condensing technology right away?   For the energy requalification of individual homes, the 2007 Budget Law was extended until 31 December 2015. The request for a 65% tax deduction concerns, for example, the replacement of a traditional boiler with a condensing boiler.     What will Vaillant support be?   7 year guarantee   The 7-year guarantee on new boilers is another excellent reason to offer Vaillant to your customers. In addition, know that by replacing a Vaillant boiler over 15 years old with a new generation one, the warranty extension will be provided free of charge by the Vaillant Official Technical Assistance Center against a maintenance contract. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less