icon Ariston Condensing Boiler Cares Premium 24 Eu Erp Methane Complete With Fume Exhaust Kit | CaldaieMurali

Ariston Condensing Boiler Cares Premium 24 Eu Erp Methane Complete With Fume Exhaust Kit

Description

IN THE ABSENCE OF THE PRODUCT THE NEW CARES S 24 MODEL WILL BE SHIPPED

Technical features
  • Product code: 3301119
Energy label specifications according to the European ErP directive
  • Class A heating energy efficiency
  • Sanitary energy efficiency profile XL Class A
  • Withdrawal profile: XL
Characteristics of heating/DHW operation:
  • Nominal heat input in heating max/min: Kw 23.5/5.5
  • Max/min nominal heat input in domestic hot water: Kw 23.5/5.5
  • Useful thermal power in heating: max/min: Kw 22.9/5.3
  • Efficiency at nominal heat input (60/80°C): 97.5%
  • Efficiency at nominal heat input (30/50°C): 103.9%
  • Efficiency at 30% at 30°C: 108.2%
  • Max/min heating temperature (high temperatures): 82/35°C
  • Max/min heating temperature (low temp.): 45/25°C
  • Max/min DHW temperature: 60/36 °C
  • Sanitary water production (DT=25°C): lt./min. 13.1
  • Specific flow rate (first 10' with DT=30°C): lt./min. 10.5
  • Total absorbed electric power W 87
  • Degrees of protection of the electrical system IP X5D
  • Dimensions (HxWxD) mm 745 x 400 x 319
  • Power supply: METHANE

General characteristics

CARES PREMIUM EU

Simplicity, compact dimensions and good efficiency

The Ariston Cares Premium compact wall-mounted condensing boiler combines technology and ease of installation thanks to its small size.
It is made in the heating and domestic hot water production version, with 24 kW of power and is set up for integration with the system configuration via the new Bridgenet® Bus communication protocol.
Designed and built in Italy, the Cares Premium condensing boiler also provides for the management of solar energy systems and is equipped with antifreeze, anti-limescale protection and anti-blocking circulator.

Characteristics:

  • Compact condensing boiler
  • Aluminum-silicon condensing exchanger
  • Mini-LCD display
  • Modulation ratio 1:4
  • Silent and compact
  • BusBridgeNet® communication protocol
  • Smoke outlet 80, 60 mm

NEW models only:

  • Installation in partially protected places
  • MET/LPG operation with standard kit

Ecodesign directive: from 2015 only new condensing boilers

After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings .

What is Energy Labeling?

Products for heating water and the environment represent around 30% of internal energy consumption in Europe.
Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to:

  • An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated.

As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹.

How to read energy labels

There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications).

In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.).

It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product

Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Ariston Condensing Boiler Cares Premium 24 Eu Erp Methane Complete With Fume Exhaust Kit

Product form

IN THE ABSENCE OF THE PRODUCT THE NEW CARES S 24 MODEL WILL BE SHIPPED Technical features Product code: 3301119... Read more

€711,00 Incl. VAT

    Description

    IN THE ABSENCE OF THE PRODUCT THE NEW CARES S 24 MODEL WILL BE SHIPPED

    Technical features
    • Product code: 3301119
    Energy label specifications according to the European ErP directive
    • Class A heating energy efficiency
    • Sanitary energy efficiency profile XL Class A
    • Withdrawal profile: XL
    Characteristics of heating/DHW operation:
    • Nominal heat input in heating max/min: Kw 23.5/5.5
    • Max/min nominal heat input in domestic hot water: Kw 23.5/5.5
    • Useful thermal power in heating: max/min: Kw 22.9/5.3
    • Efficiency at nominal heat input (60/80°C): 97.5%
    • Efficiency at nominal heat input (30/50°C): 103.9%
    • Efficiency at 30% at 30°C: 108.2%
    • Max/min heating temperature (high temperatures): 82/35°C
    • Max/min heating temperature (low temp.): 45/25°C
    • Max/min DHW temperature: 60/36 °C
    • Sanitary water production (DT=25°C): lt./min. 13.1
    • Specific flow rate (first 10' with DT=30°C): lt./min. 10.5
    • Total absorbed electric power W 87
    • Degrees of protection of the electrical system IP X5D
    • Dimensions (HxWxD) mm 745 x 400 x 319
    • Power supply: METHANE

    General characteristics

    CARES PREMIUM EU

    Simplicity, compact dimensions and good efficiency

    The Ariston Cares Premium compact wall-mounted condensing boiler combines technology and ease of installation thanks to its small size.
    It is made in the heating and domestic hot water production version, with 24 kW of power and is set up for integration with the system configuration via the new Bridgenet® Bus communication protocol.
    Designed and built in Italy, the Cares Premium condensing boiler also provides for the management of solar energy systems and is equipped with antifreeze, anti-limescale protection and anti-blocking circulator.

    Characteristics:

    • Compact condensing boiler
    • Aluminum-silicon condensing exchanger
    • Mini-LCD display
    • Modulation ratio 1:4
    • Silent and compact
    • BusBridgeNet® communication protocol
    • Smoke outlet 80, 60 mm

    NEW models only:

    • Installation in partially protected places
    • MET/LPG operation with standard kit

    Ecodesign directive: from 2015 only new condensing boilers

    After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings .

    What is Energy Labeling?

    Products for heating water and the environment represent around 30% of internal energy consumption in Europe.
    Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to:

    • An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated.

    As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹.

    How to read energy labels

    There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications).

    In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.).

    It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product

    Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 30.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane
    • marca: Ariston
    • metri quadri : 120
    • modello: CALD_280
    • potenza in kw: 24
    • potenza nominale: 24
    • superficie riscaldabile mq: 120
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account