icon Gas Boiler Chaffoteaux Urbia Green Ebus2 35 Eu Methane Condensing Complete Kit For Smoke Exhaust -New Erp | CaldaieMurali

Gas Boiler Chaffoteaux Urbia Green Ebus2 35 Eu Methane Condensing Complete Kit For Smoke Exhaust -New Erp

Description

Overview

CHAFFOTEAUX URBIA GREEN Ebus2 35 EU CONDENSING BOILER Cod. 3310409 COMPLETE WITH FUME EXHAUST KIT -NEW ErP 2015: Wall mounted condensing boilers with 4 liter mini-accumulator.

Technical specifications

Product code: 3310409

Energy label specifications according to the European ErP directive

Class A heating energy efficiency

Sanitary energy efficiency Class A

Withdrawal profiles: XL

Characteristics of heating/sanitary exercises:

Nominal heat output max/min (Hi) Qn:ÿ31/3,5ÿkW

Useful heating power80§ C/ 60§ C max/minÿ30.3/3.4ÿkW

Useful heating power50§ C/ 30§ C max/minÿ33/3,6ÿkW

Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ34.5/ 7ÿkW

Efficiency at nominal heat input:ÿ97.7%

Efficiency 30% of nominal heat input:ÿ108.7%

Energy efficiency stars: (dir 92/42/EEC) ****

Capacity of the expansion vessel: 8 lt

Maximum system water capacity: 100/300 litres

Sanitary comfort stars(EN13203): ***

Port. specific in healthcare (10 min. with T= 30øC): 16.5 l/min

Hot water flow rate at T 25§ C: 19.3 l/min

Degrees of protection for the electrical system:ÿIPX5D

Nox class: 5

Dimensions hxwxd: mmÿ745 x 440 x 445ÿ; 46kg

METHANE power supply

or

Features list

URBIA GREEN Ebus2 EU

Urbia Green is the ideal solution for all homes where the best performance is required. It is a concentration of advantages in terms of sanitary comfort with reduced dimensions and consumption. Thanks to condensing technology and integration with solar systems, it maximizes energy savings and the 4-litre sanitary reserve satisfies the needs of the most demanding users.

Sanitary comfort

Mini-accumulintegrated in 316L stainless steel of 4 liters.

Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard.

Flow rate from 14.6 to 19.3 l/min with T = 25§C.

DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very low.

DHW programmer to control the tank heating time slots

Eco-Delta System: DHW load system with 4 liter reserve to further improve the comfort of DHW production and new ecological functions which allow you to save energy in DHW mode.

Heating comfort

Efficiencyfinal 108% with energy savingsfinal 35%.

4-star combustion efficiency according to the EN 92/42 standard.

SRA function, automatic boiler regulation system according to heating requirements.

Modulation wide range, from 10% to 100% of the maximum power.

Reduced polluting emissions, NOx class 5.

Pressure sensor of the heating circuit with visualization on LCD display.

High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption.

Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature.

Arrangement for integration into a heating system via the newÿEbus2 communication protocolÿ(boilers, solar, system management modules, modulating thermoregulation accessories).

Multifunction LCD display with display: history, self-diagnosis, operating temperature.

Filling taps integrated in the boiler.

Convenience of installation use

Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings.

New intuitive electrical connections.

Easier start-up: automatic purge function and directly accessible combustion adjustment.

Save energy and respect the environment

Final 25% energy savings in combination with Expert Control and the SRA function.

Final 35% energy savings combine and Expert Control, the SRA function, the external probe and the radiant floor.

40% reduction in CO2 emissions**.

ERP extension

From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply.

These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction

For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to:

generators with a capacity of less than 400 kW

water heaters with a capacity of less than 400 kW,

kettles with a capacity of less than 2000 litres

As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase.

The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015.

The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available.

The user will be able to easily compare the performance of the products.

From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.

The company that supplies the product on the market is required to equip its system devices with the following documentation:

product energy label;ÿ

product data sheet;ÿ

system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ

technical data sheet of the system with the parts relating to the products and the system already completed.

First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that:

all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ

all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ

every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class.

The new ErP regulations

ENERGY LABELLING:

Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances.

ECODESIGN (ErP):

The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.

PRODUCT LABEL

There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible.

SYSTEM LABEL

In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way.

Warranty

All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Gas Boiler Chaffoteaux Urbia Green Ebus2 35 Eu Methane Condensing Complete Kit For Smoke Exhaust -New Erp

Product form

Overview CHAFFOTEAUX URBIA GREEN Ebus2 35 EU CONDENSING BOILER Cod. 3310409 COMPLETE WITH FUME EXHAUST KIT -NEW ErP 2015: Wall... Read more

€1.243,00 Incl. VAT

    Description

    Overview

    CHAFFOTEAUX URBIA GREEN Ebus2 35 EU CONDENSING BOILER Cod. 3310409 COMPLETE WITH FUME EXHAUST KIT -NEW ErP 2015: Wall mounted condensing boilers with 4 liter mini-accumulator.

    Technical specifications

    Product code: 3310409

    Energy label specifications according to the European ErP directive

    Class A heating energy efficiency

    Sanitary energy efficiency Class A

    Withdrawal profiles: XL

    Characteristics of heating/sanitary exercises:

    Nominal heat output max/min (Hi) Qn:ÿ31/3,5ÿkW

    Useful heating power80§ C/ 60§ C max/minÿ30.3/3.4ÿkW

    Useful heating power50§ C/ 30§ C max/minÿ33/3,6ÿkW

    Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ34.5/ 7ÿkW

    Efficiency at nominal heat input:ÿ97.7%

    Efficiency 30% of nominal heat input:ÿ108.7%

    Energy efficiency stars: (dir 92/42/EEC) ****

    Capacity of the expansion vessel: 8 lt

    Maximum system water capacity: 100/300 litres

    Sanitary comfort stars(EN13203): ***

    Port. specific in healthcare (10 min. with T= 30øC): 16.5 l/min

    Hot water flow rate at T 25§ C: 19.3 l/min

    Degrees of protection for the electrical system:ÿIPX5D

    Nox class: 5

    Dimensions hxwxd: mmÿ745 x 440 x 445ÿ; 46kg

    METHANE power supply

    or

    Features list

    URBIA GREEN Ebus2 EU

    Urbia Green is the ideal solution for all homes where the best performance is required. It is a concentration of advantages in terms of sanitary comfort with reduced dimensions and consumption. Thanks to condensing technology and integration with solar systems, it maximizes energy savings and the 4-litre sanitary reserve satisfies the needs of the most demanding users.

    Sanitary comfort

    Mini-accumulintegrated in 316L stainless steel of 4 liters.

    Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard.

    Flow rate from 14.6 to 19.3 l/min with T = 25§C.

    DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very low.

    DHW programmer to control the tank heating time slots

    Eco-Delta System: DHW load system with 4 liter reserve to further improve the comfort of DHW production and new ecological functions which allow you to save energy in DHW mode.

    Heating comfort

    Efficiencyfinal 108% with energy savingsfinal 35%.

    4-star combustion efficiency according to the EN 92/42 standard.

    SRA function, automatic boiler regulation system according to heating requirements.

    Modulation wide range, from 10% to 100% of the maximum power.

    Reduced polluting emissions, NOx class 5.

    Pressure sensor of the heating circuit with visualization on LCD display.

    High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption.

    Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature.

    Arrangement for integration into a heating system via the newÿEbus2 communication protocolÿ(boilers, solar, system management modules, modulating thermoregulation accessories).

    Multifunction LCD display with display: history, self-diagnosis, operating temperature.

    Filling taps integrated in the boiler.

    Convenience of installation use

    Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings.

    New intuitive electrical connections.

    Easier start-up: automatic purge function and directly accessible combustion adjustment.

    Save energy and respect the environment

    Final 25% energy savings in combination with Expert Control and the SRA function.

    Final 35% energy savings combine and Expert Control, the SRA function, the external probe and the radiant floor.

    40% reduction in CO2 emissions**.

    ERP extension

    From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply.

    These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction

    For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to:

    generators with a capacity of less than 400 kW

    water heaters with a capacity of less than 400 kW,

    kettles with a capacity of less than 2000 litres

    As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase.

    The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015.

    The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available.

    The user will be able to easily compare the performance of the products.

    From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.

    The company that supplies the product on the market is required to equip its system devices with the following documentation:

    product energy label;ÿ

    product data sheet;ÿ

    system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ

    technical data sheet of the system with the parts relating to the products and the system already completed.

    First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that:

    all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ

    all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ

    every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class.

    The new ErP regulations

    ENERGY LABELLING:

    Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances.

    ECODESIGN (ErP):

    The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.

    PRODUCT LABEL

    There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible.

    SYSTEM LABEL

    In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way.

    Warranty

    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 45.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane
    • marca: CHAFFOTEAUX
    • metri quadri : 250
    • modello: URBIA GREEN Ebus2 35 METANO
    • potenza in kw: 35
    • potenza nominale: 35
    • superficie riscaldabile mq: 250
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account