ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical features Model : i-BX-N004M Article number : 401472 Command on board included Cooling down External air temperature 35°C - Water temperature 7°C Cooling power: 4.2 kW Absorbed electrical power: 1.55 kW EER: 2.71 ESEER: 4.24 Values ​​referred to the EN14511 standard External air temperature 35°C - Water temperature 7°C Cooling power: 4.2 kW EER: 2.76 ESEER: 4.61 Class : C Heating External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 4.63 kW Absorbed electrical power: 1.51 kW COP: 3.07 Values ​​referred to the EN14511 standard External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 4.62 kW COP: 3.12 Class : B Energy efficiency in cooling SEER: 4.42 Efficiency ηs : 174 % Energy efficiency in low temperature heating PDesign : 3.4 kW SCOP: 3.59 Efficiency ηs : 140 % Seasonal efficiency class : A+ Energy efficiency in medium temperature heating PDesign : 3.67 kW SCOP: 2.81 Efficiency ηs : 110 % Seasonal efficiency class : A+ Performance Cooling down Exchanger water flow rate: 0.2 m 3 /h Available pump head: 51.4 kPa Sound power level : 64 dB(A) Sound pressure : 50dB(A) Heating Exchanger water flow rate: 0.22 m 3 /h Available pump head: 47.9 kPa Sound power level : 64 dB(A) Sound pressure : 50dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Operating limits Heating External air temperature : -20°C ~ 45°C Introduced water temperature : 24°C~ 60°C Cooling down External air temperature : -10°C ~ 46°C Introduced water temperature : -8°C ~ 20°C Dimensions and weight Dimensions (LxWxH): 900x370x940 mm Empty weight: 80.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single circuit configuration using R410A refrigerant, air side exchange coil with copper pipes and aluminum fins, water side heat exchanger with brazed plates. The unit is equipped with an electronic expansion valve and built-in hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to the accurate thermoregulation combined with the use of inverter technology. The accurate design and the use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are regulated synergistically according to proprietary logics to maximize unit efficiency. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology which guarantees the exact energy in correspondence with the real needs of the building. High efficiency which translates into reduced energy consumption throughout the unit's working period. Comfort applications Residential buildings Business premises Infrastructure for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems that can be created with cascade systems ErP Ready i-BX-N thanks to the inverter technology complies with the ErP directive, exceeding the minimum requirements for seasonal energy efficiency in heating, SCOP, both for low temperature and medium temperature applications Silent operation : Noise emissions are reduced thanks to the modulation of the frequency of the compressor and the speed of the fan Reduced consumption : The dynamic control of the water delivery temperature according to the outside air temperature greatly increases the comfort and energy efficiency of the system Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages hot water production via a 3-way valve to be installed outside the unit Ease of installation : The i-BX-N heat pumps are of the "packaged" monobloc type which are particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the typical procedures of direct expansion air conditioning systems Intelligent management of your system Nadisystem guarantees centralized regulation of the system, ensuring: Easy communication between the different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on the availability, yields and costs of their use, always preferring renewable sources. The auxiliary sources are activated to meet the building's needs at low outside temperatures by integrating the thermal power of the heat pump System customization Nadisystem has various special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of system with different water temperature levels. Cascade management of units If the heat requirements are high, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure consisting of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with stepless speed regulation that improve the air distribution obtaining low consumption and minimizing the sound level Drums Condenser with copper tubes and aluminum fins Standard coil protection grids up to size 015 Control Keyboard with LCD display and electronic adjustment via menu NADI Compact Functional keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM control Setting of the water set point with fixed or dynamic value with Climatic Curve. Antifreeze protection according to water temperature and outside air temperature. Domestic hot water production. 4 Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade system management If the heat requirements are high, it is possible to connect up to 4 units of the same power in cascade Managed in master-slave mode, with the master unit in charge of processing the information and then transmitting it to the slave units High degree of partialisation of the supplied power, without reducing performance, and precise sizing of the system Possibility of dedicating just one or all the units to the production of domestic hot water. Integrated hydronic unit All plumbing components for installation are already included with no increase in unit size. EC pump, brushless motor with electronic switching to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion tank. Air vent valve. Mesh filter, unassembled but supplied with the unit Evaporator Brazed plate heat exchanger in AISI 316 steel, externally lined with anti-condensation mat in closed cell neoprene (CFC and HCFC-free). Thermostatic electric resistance to protect against the formation of ice inside. Low pressure drops and optimized heat exchange Refrigerant circuit Standard electronic expansion valve Optimized coolant flow Precise and effective temperature control Fast regulation and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special antifreeze function Dedicated algorithms avoid the formation of ice inside by managing the operation Of the electrical resistance on the plate heat exchanger. Of the pump according to the outside air temperature. Of the flow switch in case of no flow The unit is also set up to operate, with brine mixtures, down to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water tank probe and inertial tank probe Copper-Aluminium type batteries with epoxy painting Copper-Copper type batteries Hydraulic separator Domestic hot water storage Antifreeze electric heater on base and for auxiliary condensate drain pan RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 120T Product code : 3301875 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 9.51 kW Absorbed electrical power: 2.97 kW COP: 3.20 External air temperature 7°C - Water temperature 30/35°C Thermal power: 12.00 kW Absorbed electrical power: 2.45 kW COP: 4.90 External air temperature 7°C - Water temperature 40/45°C Normal thermal power: 8.20 kW Absorbed electrical power: 2.00 kW COP: 4.10 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 9.05 kW Absorbed electrical power: 2.87 kW EER: 3.15 External air temperature 35°C - Water temperature 18°/23°C Normal cooling capacity: 10.74 kW Absorbed electrical power: 2.11 kW EER: 5.08 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x1506x374 mm Empty weight: 131.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 80T Product code : 3301873 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 7.41 kW Absorbed electrical power: 2.47 kW COP : 3.00 External air temperature 7°C - Water temperature 30/35°C Thermal power: 8.00 kW Absorbed electrical power: 1.67 kW COP: 4.80 External air temperature 7°C - Water temperature 40/45°C Normal thermal power: 6.00 kW Absorbed electrical power: 1.62 kW COP: 3.70 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 7.00 kW Absorbed electrical power: 2.26 kW EER: 3.10 External air temperature 35°C - Water temperature 18°/23°C Nonimal cooling capacity: 7.00 kW Absorbed electrical power: 1.49 kW EER: 4.70 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x1106x374 mm Empty weight: 104.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M6 Product code : 3.032373 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.95 Heating COP with water set at 45 °C: 3.70 Heating COP with water set at 55 °C: 2.95 EER cooling with water set at 7 °C: 3.00 EER cooling with water set at 18 °C: 4.80 Performance   Heating Useful power in heating with water set at 35° C: 6.35 kW Useful power in heating with water set at 45° C: 6.30 kW Useful power in heating with water set at 55° C: 6.00 kW Heating temperature range : 12° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 7.00 kW Useful power in cooling with water set at 18 °C: 6.50 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 12 ~ 65°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 2700 W System expansion tank: 8 litres Rated Operating Current: 14A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 43° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 25.4 mm (1") M Return pipe diameter : 25.4 mm (1") M Dimensions and weight Dimensions (WxHxD): 1295x712x429 mm Weight : 86Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM161MR U34 Energy efficiency EER: 4.0 SCOP : 4.7 Energy efficiency class in heating: A+++/A++ Performance Cooling capacity : 16.0 kW Heating capacity: 16.0 kW Nominal flow rate : 2760 l/h Sound power level : 61 dB(A) Sound pressure level : 39 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 80° C Installation data Inlet Pipe Diameter : 25.4 mm (1") Male Outlet piping diameter : 25.4 mm (1") Male Dimensions and weight External unit dimensions (WxHxD): 1239x1380x330 mm Outdoor unit weight: 118.6 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. What is a heat pump? The LG THERMA V air-to-water heat pump provides heating, cooling and domestic hot water without using fossil fuels, providing 100% renewable energy for an efficient and comfortable home The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO 2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outside temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IF THE ITEM IS NOT IMMEDIATELY AVAILABLE IT WILL BE POSSIBLE TO ORDER IT IN 10 WORKING DAYS. First ignition excluded hydronic module ERST20DVM2D SMALL SIZE Reversible version Power supply (V,Hz, Ø) : 220~240/50/1 System water content of the module: 3.50 litres Water flow rate : 5.00 ~ 36.90 l/min System expansion vessel: 12 DHW tank volume: 200 litres Dimensions (HxWxD): 1600x595x680 mm Weight : 104Kg Outdoor Unit SUZ-SWM40VA Power supply (V,Hz, Ø) : 220~240/50/1 Liquid Pipe Diameters: 6.35 mm (1/4") Gas pipe diameters: 12.70 mm (1/2") Pipe length : 5~30 m Maximum height difference: 30 m Heating : -20°C/ + 24°C DHW : -20°C/ + 35°C Cooling : 10°C/ + 46°C R-32 refrigerant gas Dimensions (HxWxD): 880x840x330 mm Heating Air 7° / Water 35° Delta 5°C Nom. / Max kW 4.00/7.10 Max water temperature °C 60 Low water temperature 35°C (medium season)1 SCOP Rank A+++ Medium Water temperature 55°C (medium season) SCOP 3.29 Rank A++ Cooling Air 35° / Water 18° Delta 5°C 5.60/7.00 Power consumption Nom. / Max kW 1.12/1.53 Ecodan system The Ecodan - split system consists of a traditional direct expansion outdoor unit (Power Inverter or Zubadan type) and a hydronic module to be installed indoors, capable of producing cold and hot water for heating or sanitary use. The module is equipped with a control unit FTC4 Hydrotank split The Hydrotank is the indoor hydronic module for floor installation equipped with a 170, 200 or 300 liter storage tank for domestic hot water. A wide range of indoor units The internal hydronic modules of the Ecodan® - Split line offer a wide range of choices: "Hydrotank" the simplicity and practicality of the "all-in-one", incorporating a 170, 200, 300 liter boiler for the production of domestic hot water. The "Split" systems can be connected to an external unit of the "Zubadan" series to favor performance at low temperatures or of the "Ecodan®" series characterized by the largest extension of the range. Hydrotank and reversible Hydrotank The hydrotank is the hydronic module of the Ecodan® line equipped with a 170, 200 or 300 liter storage tank for domestic hot water. The Hydrotank is also available in both the "hot only" version and the reversible version with which it is also possible to produce chilled water for summer air conditioning. Both versions are particularly compact and contain all the main components of the primary hydraulic system. Attention has been paid to the smallest details: Simple, modern and elegant design; Small dimensions that allow installation even in small niches, closets, etc. Easy maintenance, all the main components can be reached simply by removing the front panel. Ease of handling thanks to the lower handle. Ease of transport even in small vans thanks to the compact dimensions and the possibility of laying it down even in a horizontal position. FTC6 control system The Ecodan® - Split systems are equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms. Integrated condensate collection tray for reversible models Inside the reversible Hydrotank units there is space for the condensate collection tray. The unit is equipped with a drain piping to the rear. Exclusive “Scale trap” filter Thanks to the combination of the plate exchanger and the exclusive «Scale trap» filter, the performance of the DHW cycle remains unchanged over time. In traditional systems there is the risk that the calcium, as it precipitates, deposits inside the exchanger, reducing its exchange surface. The Hydrotank is equipped with the exclusive «Scale trap» filter which homogeneously captures the precipitated calcium before it has the possibility to settle in the exchanger. In this way the heat exchange remains unchanged, guaranteeing high performance for the production of domestic hot water SG Ready: integration with photovoltaic systems The new Ecodan® hydronic modules support the SG ready function. Acronym of Smart Grid Ready, the function allows you to maximize the self-consumption of electricity from a photovoltaic system and is implemented with 2 additional inputs. Ecodan® R32 outdoor units The new Ecodan® R32 SUZ-SWM outdoor units with capacities of 4.00, 6.00, 8.00 kW combined with the new D-Generation indoor units are the efficient and high-performance solution for heating, cooling and for the production of domestic hot water. Low GWP R32 refrigerant ; Extended operating range up to -20°C ; Efficiency class A+++ in heating and A+ for the production of domestic hot water; Delivery water temperature up to 60°C . High performance in heating The new Ecodan® R32 units are able to adapt to all system solutions and maintain high performance with outdoor temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures. R32: a low environmental impact refrigerant The R32 refrigerant gas complies with the European directives on the reduction of the greenhouse effect, presenting a lower GWP than R410A and not damaging the ozone layer. Exclusive AA Chassis The search for a product that prides itself on its silent operation led to a complete redesign of the unit's chassis. The AA units are lower than previous generation bifan units of equal power and have a discreet and sophisticated design. To reduce fan noise, the new AA chassis outdoor units use a larger diameter fan further away from the coil Extended operating range Operating range in heating extended up to -20°C. The new outdoor units are also suitable for harsher climates. The new layout of the refrigerant circuit limits the risk of resonances and vibrations. The new compressor is installed on rubber supports and is efficiently acoustically isolated by a dedicated structure. The new design of the fan guarantees less acoustic impact. All these technological improvements guarantee a reduction of -10dB (A) in operating noise. Small size The new AA Chassis outdoor units guarantee a smaller footprint thanks to the reduced height dimensions compared to the previous model. High performance The new compressor of the AA outdoor units, more compact and powerful, allows to reach high SCOP values ​​without sacrificing power. The whole series brilliantly exceeds the seasonal energy efficiency class A++ as defined by the European directive ErP Lot 1 New base design The base of the AA outdoor units has been redesigned to optimize and facilitate condensate drainage. The improvement of the defrost logics and the layout of the coil, combined with the new condensate drainage base, make it possible to avoid the formation of ice which could limit the comfort of use. Inverter technology Heat pumps normally reduce their heating capacity when the outside air temperature drops, just as the building's heat demand increases. The inverter technology manages to compensate for the lower thermal yield at low temperatures, by increasing the rotation speed of the compressor . Conversely, when the external air temperature increases, the inverter modulates the frequency, adapting the power supplied to the required heat requirement and drastically reducing electricity consumption . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Catalog code : HM143MR U34 Power : 14 kW Color : Silk gray / RAL 7044 Energy efficiency SCOP: 3.46 Seasonal heating efficiency: 135% Energy efficiency class in heating: A++ Performance Cooling Capacity: 14.0 kW Heating Capacity: 14.0 kW Nominal flow rate : 40.3 l/min Sound Power Level : 57~61 dB(A) Sound Pressure Level : 35~39 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating Limits Waterfall Cooling: -15° ~ 65°C Heating: 5° ~ 27°C DHW : 15° ~ 80° C Air Cooling: -25° ~ 35°C Heating: 5° ~ 48° C Installation data Inlet hydraulic circuit piping diameter: 25.4 mm (1") Outlet hydraulic circuit piping diameter: 25.4 mm (1") Dimensions and weight Dimensions (WxHxD): 1239x1380x330 mm Weight : 118.6Kg LG Therma V TM Monoblock S R-32 THERMA V Monobloc S R32 is the second generation of LG's Monobloc R32 which combines the best performance of the THERMA V series and a reduced noise level, thanks to the cutting-edge technology of the "acoustic shield", placed over the compressor to reduce vibrations produced by the operation of the machine. Monobloc S R32 combines the indoor unit and outdoor unit as a single module and is connected only by water pipes, eliminating the need for refrigerant pipes. Furthermore, the hydronic components such as plate heat exchanger, expansion vessel, water pump, flow sensor, pressure sensor, air vent valves and safety valve are located inside. inside the unit. Monobloc S R32 provides excellent heating performance, especially at low temperatures, while reducing its carbon emissions Improved installation flexibility All-in-one outdoor unit Low noise that allows high installation flexibility Outdoor unit with built-in hydronic components: water pump, flow meter, pressure sensor, expansion vessel, air vent valve, etc. Easy to use installation settings interface Optional backup electric heaters (3kW or 6kW) Improved connectivity for third party backup electric heaters High efficiency and wide operating range R32 refrigerant with low global warming potential (GWP) Less environmental impact with a low amount of refrigerant 100% heating capacity at -15° C OAT (@ LWT 35° C, except 16kW model) Improved heating operation in defrost conditions SCOP up to 4.67 (average climate / low temperature application): A+++ SCOP up to 3.47 (Average climate / medium temperature application) : A++ COP up to 4.90 (External air 7° C / Supply water 35° C) Delivery water temperature up to 65°C Innovative design and technology Improved heat exchanger design (Black Fin) Integrated water flow and pressure sensors for real-time monitoring Advanced circulator options (optimum flow rate, fixed capacity, fixed flow rate, fixed ?T) Improved 2nd loop control logic Modbus connectivity without gateway Control for the DHW circulation pump according to the program Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWYQ011ACW1P Energy efficiency EER: 2.85 ESEER: 4.44 COP: 3.27 Performance Cooling Capacity: 11.10 kW Heating Capacity: 11.80 kW Cooling absorption: 3.90 kW Air Flow : 6000 m 3 /h Cooling water flow rate: 0.525 l/sec Heating water flow rate: 0.597 l/sec Nominal head Cooling : 49.1 kPa Nominal head Heating : 43.0 kPa Sound power level : 64 dB(A) Sound pressure level : 51 dB(A) Electrical data Type of Compressor : Scroll Power supply (V,Hz, Ø) : 380~420/50/3 Refrigerant gas : R-410 Field of Operation Water side cooling : 5° ~ 22° C Water side heating : 25° ~ 50° C Air side cooling : 10° ~ 46° CBS Air side heating : -15° ~ 35° CBS Installation data Diameter of hydraulic pipe connections: 31.75 mm (5/4") Dimensions and weight Dimensions (HxWxD): 1435x1418xx382 mm Empty weight: 180 Kg Daikin Mini Chiller Systems Air cooled minichiller with Inverter The Daikin Minichiller series dedicated to residential or small commercial applications , with nominal capacities from 5 kW to 13 kW, uses the inverter as a distinctive feature. The hermetic Swing compressor for sizes 005-007 kW and Scroll for the following ones 009-013 kW is driven by Inverter as well as the fans of the unit. High performance is therefore achieved at partial loads, control of the water delivery temperature at a fixed point, which can be used, for example, for radiant panel systems, and excellent acoustic performance at partial loads thanks to the simultaneous reduction of noise emission from both the compressor and of fan. The water content necessary for the correct operation of the unit is reduced thanks to the inverter, and can guarantee operation even without buffer tanks. The water-refrigerant exchanger is with brazed plates Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values ​​higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Scroll compressor Scroll compressors have two scrolls, one remains stationary while the other orbits eccentrically without rotating. Designed for small and medium capacities, they guarantee constant reliability and high efficiency throughout their operational life Characteristics Simple, compact and robust Absence of valves and swing joint mechanisms, to ensure maximum reliability Constant compression, to ensure a low level of energy consumption Increased compression efficiency due to the absence of volumetric expansion Low sound level Low starting current The Scroll compressor lends itself to the use of the Inverter, as on the range up to 13 kW, being able to guarantee high ESEER values, absence of peak and precise control of the outlet water temperature Advantages: › Extraordinary part load efficiency › Inverter technology to ensure low noise and best-in-class ESEER values › Wide operating range › Integrated hydronic systems › Easy “plug and play” installation › Single-phase power supply for residential applications, three-phase power model available for small commercial applications Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWYQ008BVP Daikin OP10 Evaporator Heater Included Energy efficiency EER: 3.10 ESEER: 5.24 COP : 3.49 / 4.59 Performance Cooling Capacity: 7.95 kW Heating Capacity: 8.30 kW Cooling absorption: 2.57 / 1.65 kW Heating absorption: 2.31 / 1.84 kW Cooling Air Flow : 72 m 3 /min Heating air flow rate: 49.3 m 3 /min Cooling water flow rate: 22.8 / 23.6 l/min Heating water flow rate: 23.2 / 24.2 l/min Sound Power Level : 65 ~ 69 dB(A) Sound Pressure Level : 47 ~ 53 dB(A) Electrical data Type of Compressor : Swing Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Field of Operation Water side cooling : 5° ~ 22° C Water side heating : 15° ~ 55° C Air side cooling : 10° ~ 46° CBS Air side heating : -15° ~ 25° CBS Installation data Diameter of hydraulic pipe connections: 25.4 mm (1") Dimensions and weight Dimensions (HxWxD): 997x1160x380 mm Weight : 106Kg Air cooled heat pump with inverter driven compressor Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values ​​higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Swing Inverter compressor The Daikin minichiller, the first on the market with inverter technology, uses the Daikin swing compressor designed for applications using R-410A refrigerant Characteristics Energy savings due to the elimination of friction and refrigerant leaks Operation down to -15°C outside temperature Precise control of outlet water temperature No storage tank is needed Advantages: › Top-of-the-range product in terms of energy efficiency and operating range › All sizes are available in 2 versions: standard and with OP10 option (no freezing of the water when not in use, thanks to the heating tape in the water pipes) › Easy “plug and play” installation › Among the quietest units available on the market (63 dBA - sound power) › Single-phase power supply and low inrush current make this unit ideal for residential applications › Weight reduced by 20% compared to previous models › Integrated hydraulic kit: no buffer tank required, inverter controlled pump as standard, main flow sensor and switch included. › The wired controller included in the standard equipment allows setting of multiple setpoints (cooling, heating, leaving water temperature) or values ​​based on outdoor conditions (weather-based control). It features alarm history, reduced night noise function and is available in multiple languages Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWYQ009ACW1P Energy efficiency EER: 2.99 ESEER: 4.43 COP: 3.29 Performance Cooling Capacity: 9.12 kW Heating Capacity: 10.80 kW Cooling absorption: 3.05 kW Air Flow : 5760 m 3 /h Cooling water flow rate: 0.430 l/sec Heating water flow rate: 0.525 l/sec Nominal head Cooling : 56.4 kPa Nominal head Heating : 49.1 kPa Sound power level : 64 dB(A) Sound pressure level : 51 dB(A) Electrical data Type of Compressor : Scroll Power supply (V,Hz, Ø) : 380~420/50/3 Refrigerant gas : R-410 Field of Operation Water side cooling : 5° ~ 22° C Water side heating : 25° ~ 50° C Air side cooling : 10° ~ 46° CBS Air side heating : -15° ~ 35° CBS Installation data Diameter of hydraulic pipe connections: 31.75 mm (5/4") Dimensions and weight Dimensions (HxWxD): 1435x1418xx382 mm Empty weight: 180 Kg Daikin Mini Chiller Systems Air cooled minichiller with Inverter The Daikin Minichiller series dedicated to residential or small commercial applications , with nominal capacities from 5 kW to 13 kW , uses the inverter as a distinctive feature. The hermetic Swing compressor for sizes 005-007 kW and Scroll for the following ones 009-013 kW is driven by Inverter as well as the fans of the unit. High performance is therefore achieved at partial loads, control of the water delivery temperature at a fixed point, which can be used, for example, for radiant panel systems, and excellent acoustic performance at partial loads thanks to the simultaneous reduction of noise emission from both the compressor and of fan. The water content necessary for the correct operation of the unit is reduced thanks to the inverter, and can guarantee operation even without buffer tanks. The water-refrigerant exchanger is with brazed plates Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values ​​higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Scroll compressor Scroll compressors have two scrolls, one remains stationary while the other orbits eccentrically without rotating. Designed for small and medium capacities, they guarantee constant reliability and high efficiency throughout their operational life Characteristics Simple, compact and robust Absence of valves and swing joint mechanisms, to ensure maximum reliability Constant compression, to ensure a low level of energy consumption Increased compression efficiency due to the absence of volumetric expansion Low sound level Low starting current The Scroll compressor lends itself to the use of the Inverter, as on the range up to 13 kW, being able to guarantee high ESEER values, absence of peak and precise control of the outlet water temperature Advantages: › Extraordinary part load efficiency › Inverter technology to ensure low noise and best-in-class ESEER values › Wide operating range › Integrated hydronic systems › Easy “plug and play” installation › Single-phase power supply for residential applications, three-phase power model available for small commercial applications Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWYQ010ACV3P Energy efficiency EER: 2.93 ESEER: 4.30 COP: 3.04 Performance Cooling Capacity: 9.62 kW Heating Capacity: 10.40 kW Cooling absorption: 3.28 kW Air Flow : 6000 m 3 /h Cooling water flow rate: 0.453 l/sec Heating water flow rate: 0.550 l/sec Nominal head Cooling : 54.6 kPa Nominal head Heating : 47.1 kPa Sound power level : 64 dB(A) Sound pressure level : 51 dB(A) Electrical data Type of Compressor : Scroll Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Field of Operation Water side cooling : 5° ~ 22° C Water side heating : 25° ~ 50° C Air side cooling : 10° ~ 46° CBS Air side heating : -15° ~ 35° CBS Installation data Diameter of hydraulic pipe connections: 31.75 mm (5/4") Dimensions and weight Dimensions (HxWxD): 1435x1418xx382 mm Empty weight: 180 Kg Daikin Mini Chiller Systems Air cooled minichiller with Inverter The Daikin Minichiller series dedicated to residential or small commercial applications , with nominal capacities from 5 kW to 13 kW, uses the inverter as a distinctive feature. The hermetic Swing compressor for sizes 005-007 kW and Scroll for the following ones 009-013 kW is driven by Inverter as well as the fans of the unit. High performance is therefore achieved at partial loads, control of the water delivery temperature at a fixed point, which can be used, for example, for radiant panel systems, and excellent acoustic performance at partial loads thanks to the simultaneous reduction of noise emission from both the compressor and of fan. The water content necessary for the correct operation of the unit is reduced thanks to the inverter, and can guarantee operation even without buffer tanks. The water-refrigerant exchanger is with brazed plates Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values ​​higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Scroll compressor Scroll compressors have two scrolls, one remains stationary while the other orbits eccentrically without rotating. Designed for small and medium capacities, they guarantee constant reliability and high efficiency throughout their operational life Characteristics Simple, compact and robust Absence of valves and swing joint mechanisms, to ensure maximum reliability Constant compression, to ensure a low level of energy consumption Increased compression efficiency due to the absence of volumetric expansion Low sound level Low starting current The Scroll compressor lends itself to the use of the Inverter, as on the range up to 13 kW, being able to guarantee high ESEER values, absence of peak and precise control of the outlet water temperature Advantages: › Extraordinary part load efficiency › Inverter technology to ensure low noise and best-in-class ESEER values › Wide operating range › Integrated hydronic systems › Easy “plug and play” installation › Single-phase power supply for residential applications, three-phase power model available for small commercial applications Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWAQ011ACW1P Energy efficiency EER: 2.85 ESEER: 4.44 Performance Cooling Capacity: 11.1 kW Cooling absorption: 3.9 kW Air Flow : 6000 m 3 /h Water flow rate: 0.525 l/sec Nominal head : 49.1 kPa Sound power level : 64 dB(A) Sound pressure level : 51 dB(A) Electrical data Type of Compressor : Scroll Power supply (V,Hz, Ø) : 400/50/3 Refrigerant gas : R-410 Field of Operation Water : 5° ~ 22° C Air : 10° ~ 46° CBS Installation data Diameter of hydraulic pipe connections: 31.75 mm (5/4") Dimensions and weight Dimensions (HxWxD): 1435x1418xx382 mm Empty weight: 180 Kg Daikin Mini Chiller Systems Air cooled minichiller with Inverter The Daikin Minichiller series dedicated to residential or small commercial applications , with nominal capacities from 5 kW to 13 kW , uses the inverter as a distinctive feature. The hermetic Swing compressor for sizes 005-007 kW and Scroll for the following ones 009-013 kW is driven by Inverter as well as the fans of the unit. High performance is therefore achieved at partial loads, control of the water delivery temperature at a fixed point, which can be used, for example, for radiant panel systems, and excellent acoustic performance at partial loads thanks to the simultaneous reduction of noise emission from both the compressor and of fan. The water content necessary for the correct operation of the unit is reduced thanks to the inverter, and can guarantee operation even without buffer tanks. The water-refrigerant exchanger is with brazed plates Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values ​​higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Scroll compressor Scroll compressors have two scrolls, one remains stationary while the other orbits eccentrically without rotating. Designed for small and medium capacities, they guarantee constant reliability and high efficiency throughout their operational life Characteristics Simple, compact and robust Absence of valves and swing joint mechanisms, to ensure maximum reliability Constant compression, to ensure a low level of energy consumption Increased compression efficiency due to the absence of volumetric expansion Low sound level Low starting current The Scroll compressor lends itself to the use of the Inverter, as on the range up to 13 kW, being able to guarantee high ESEER values, absence of peak and precise control of the outlet water temperature Advantages: › Extraordinary part load efficiency › Inverter technology to ensure low noise and best-in-class ESEER values › Wide operating range › Integrated hydronic systems › Easy “plug and play” installation › Single-phase power supply for residential applications, three-phase power model available for small commercial applications Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less