ATTENTION ! OFFER VALID UNTIL STOCKS LAST FIRST START UP INCLUDED! Technical features Thermal power (air +7°C (bs) / +6°C (bu) and delivery temperature of +35°C - EN 14511): 4.65 kW COP: 5.00 Cooling capacity (air +35°C (bs) and delivery temperature +7°C - EN 14511): 4.60 kW EER: 2.98 SEER: 4.71 R32 refrigerant charge: 2.00 kg Number/type of compressors: 1/rotary DC inverter Number of fans: 1 Nominal water flow (winter operation): 0.80 m³/h Circulation pump useful head: 55 kPa Inlet/outlet hydraulic connections: 1” male / 1” male Power supply voltage: 230V 1P+N+T Power supply frequency: 50Hz Overall dimensions H x W x D: 945mm x 1210mm x 402mm Weight: 92kg Sound power: 61dB(A) Sound pressure at 1 meter in free field on a reflective surface: 48.8 dB(A) BAXI AURIGA Inverter Monobloc Air-Water Heat Pumps Baxi introduces Auriga , the range of inverter packaged air-to-water heat pumps with single-phase and three-phase power supply. The range is characterized by the ease and simplicity of installation . Furthermore, the increased head of the on-board circulator allows the unit to be installed in large-scale systems, to cover greater distances from the heating plant or to install the unit directly to serve the fan coils. The range is wide and consists of 8 models from 4 to 16 kW, single-phase and three-phase versions Wide range of powers from 4 to 16 kW to satisfy all system requirements: heating, cooling and DHW production Easy to install in various living contexts, the increased head pump allows you to cope with greater pressure drops such as large systems or directly serving the fan coils STANDARD complete hydraulic equipment circulation pump, flow switch, expansion tank, safety valve, pressure gauge and “Y” filter Remote control panel control of system functions, programming and parameter verification. Furthermore, the connection via Modbus allows integration with BMS systems ErP Energy Labeling the labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A+++ to D (in heating) and from A+ to F (in sanitary). The 5M/7M/9M models achieve an efficiency of A+++ in low temperature heating Components > Twin rotary DC inverter compressor : complete with internal thermal protection and crankcase heater, it is mounted on vibration dampers and wrapped around an insulating cap to reduce the transmission of noise and vibrations due to operation > Water-refrigerant exchanger : with brazed plates in AISI 316 steel with external anti-condensation insulation in expanded polypropylene and antifreeze resistance to prevent the formation of ice in the exchanger > Air-refrigerant exchanger : finned aluminum coil with hydrophilic treatment to facilitate the outflow of the condensate, mechanically expanded copper pipes with internal shaping to increase the heat exchange Furthermore, the optimized circuitry reduces the formation of ice in the coil during heat pump operation > Fan : axial fan directly coupled to the high efficiency brushless DC variable speed motor. The fan is installed on aerodynamic nozzles and safety grilles > Refrigerant circuit : made of pickled copper, it includes the electronic expansion valve, drier filters, high and low pressure switches, pressure transducer, cycle inversion valves, liquid receiver and separator, refrigerant injection valve on the suction side > Hydraulic circuit : in addition to the brazed plate heat exchanger, the unit includes the high head circulator, the expansion vessel, the safety valve, the flow switch, the pressure gauge and the air vent valve and the metal mesh Y-filter (assembly by the installer) > Electrical panel : includes fuse protection of the main internal components; the terminal block is divided into a power section for supplying the unit and a control terminal block for connecting auxiliary inputs and outputs and connection to the control panel Main Features BAXI AURIGA Maximum energy efficiency Monobloc system for the production of heating, cooling and DHW Wide operating range, with external air down to -25°C in heating, up to 46°C in cooling DHW system management: production up to 60°C, storage tank temperature management, DHW recirculation pump and solar thermal integration Suitable for integration with radiant terminals, fan coils and mixed systems Integrated management with various plant systems: boiler integration, solar integration, management of diverter valves and secondary circuit pump Single-phase and three-phase power supply Compressor with DC inverter technology with high modulation range Modbus network connection Low GWP R32 refrigerant Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Model : AHZ-044HCDS1 Command Included Optional commands Wi-Fi interface : HCCS-H64H2C1M Temperature sensor : HTS-E1000A1 Energy efficiency SEER: 5.75 SCOP: 3.47 Energy efficiency class: A+++/A++ Performance Nominal capacity in heating : 4.4 ~ 7.0 kW Rated capacity in cooling : 5.1 ~ 6.3 kW Air flow rate : 2700 m 3 /h Water flow rate : 0.50 ~ 1.21 m 3 /h Sound pressure : 47 dB(A) Sound power : 61 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-32 Operating range - Cooling: 5° ~ 46° Cbs - Heating: -25° ~ 35° Cbs - DHW : -25° ~ 40° Cbs Installation data Gate valves diameter: G 1” - G 1” (male) Inlet / outlet piping diameter: G 1” / G 1” (female) Dimensions and weight Dimensions (HxWxD): 815x1270x340 mm Weight : 88Kg Hisense Hi-Therma heat pump Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components. High Efficiency and Excellent Performance Ecological R32 Refrigerant The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions Characteristics ◆ Zero Ozone Impact Potential ◆ Reduced Global Warming Potential ◆ Reduced Global Warming Potential ◆ Single component refrigerant: easy to handle High Efficiency A+++ Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact High Efficiency Twin Rotary Inverter Compressor High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable 1. High efficiency electric motor Optimized electric motor design to increase compressor performance 2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise 3. Comprehensive mechanism design Improved volumetric efficiency and overall performance 4. Screw fixing Improve the fixing effect and reduce the deformation of the core Simplified installation The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system Main hydraulic components Insulated plate heat exchanger Expansion vessel Very high head DC circulator, flow rate reading on command Wide Operating Range Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance. Management of External Heat Sources Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system Smart Grids The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid Double Thermal Zone By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations Sound Reduction Low Noise Mode For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A). Night mode By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A) Up to 7 indoor environments with independent temperature control With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2. Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃ Screed drying Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller Standard Color Touch Remote Control for Monobloc, optional for Split version Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces ◆ Elegant design ◆ Compact (90×90mm) ◆ Intuitive and touch screen General characteristics ◆ Setup wizard for commissioning. ◆ 10 languages, including Italian. ◆ View energy consumption and capacity. ◆ Water temperature control of the circuits and individual control of the room temperature. ◆ Alarm code and advanced parameter display; useful for maintenance. ◆ Weekly timer and holiday mode. ◆ ECO/Silent/Night mode suitable for different user needs. ◆ Physical button for on/off and reset Slide adjustment The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning Theme setting Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view Easy installation In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick Room thermostat The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit Features HSXE-VC04 ◆ Elegant design ◆ Flat shape for easy wall installation ◆ Compact (86×86mm) ◆ Intuitive control via touch buttons ◆ Room temperature and DHW set ◆ ECO/DHW/Timer (0.5-24 hours) One button for DHW Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings Remote Management Via App Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone Simple configuration and use ◆ Up to 64 managed drives ◆ Up to 32 users ◆ Consumption management ◆ Faults ◆ On/Off ◆ Circuit/room/DHW temperatures ◆ 14 languages, including Italian ◆ Multiple scenarios that can be set Energy management Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less