FREE FIRST START-UP Technical features Product code : HMI140 Energy efficiency EER: 2.74 COP: 3.35 Energy Efficiency Class for low temperatures: A++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 12.0 kW Heating Capacity: 14.0 kW Cooling absorption: 4.38 kW Heating absorption: 4.18 kW Cooling water flow rate: 2065 l/h Heating water flow rate: 2474 l/h Sound power level : 70 dB(A) Sound Pressure Level : 55~57 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion vessel Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FREE FIRST START-UP Technical features Product code : HMI120T Energy efficiency EER: 3.05 COP: 3.45 Energy Efficiency Class for low temperatures: A+++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 9.5 kW Heating Capacity: 12.0 kW Cooling absorption: 3.11 kW Heating absorption: 3.48 kW Cooling water flow rate: 1665 l/h Heating water flow rate: 2040 l/h Sound power level : 69 dB(A) Sound Pressure Level : 54~56 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion tank Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FREE FIRST START-UP Technical features Product code : HMI160 Energy efficiency EER: 2.62 COP : 3.30 Energy Efficiency Class for low temperatures: A++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 13.0 kW Heating Capacity: 15.0 kW Cooling absorption: 4.96 kW Heating absorption: 4.70 kW Cooling water flow rate: 2270 l/h Heating water flow rate: 2700 l/h Sound power level : 72 dB(A) Sound Pressure Level : 57~59 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion vessel Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FREE FIRST START-UP Technical features Product code : HMI120 Energy efficiency EER: 2.97 COP: 3.45 Energy Efficiency Class for low temperatures: A+++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 9.5 kW Heating Capacity: 12.0 kW Cooling absorption: 3.2 kW Heating absorption: 3.48 kW Cooling water flow rate: 1650 l/h Heating water flow rate: 2050 l/h Sound power level : 69 dB(A) Sound Pressure Level : 54~56 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion vessel Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FREE FIRST START-UP Technical features Product code : HMI060 Energy efficiency EER: 3.10 COP: 3.80 Energy Efficiency Class for low temperatures: A+++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 4.0 kW Heating Capacity: 6.0 kW Cooling absorption: 1.29 kW Heating absorption: 1.58 kW Cooling water flow rate: 672 l/h Heating water flow rate: 977 l/h Sound power level : 64 dB(A) Sound Pressure Level : 50~52 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1150x758x345 mm Weight of Outdoor Unit: 96 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion vessel Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FREE FIRST START-UP Technical features Product code : HMI040 Energy efficiency EER: 3.19 COP : 4.0 Energy Efficiency Class for low temperatures: A+++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 3.0 kW Heating Capacity: 4.0 kW Cooling absorption: 0.94 kW Heating absorption: 1.0 kW Cooling water flow rate: 516 l/h Heating water flow rate: 690 l/h Sound power level : 64 dB(A) Sound Pressure Level : 50~51 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1150x758x345 mm Weight of Outdoor Unit: 96 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion tank Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FREE FIRST START-UP Technical features Product code : HMI100T Energy efficiency EER: 2.95 COP: 3.70 Energy Efficiency Class for low temperatures: A+++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 7.8 kW Heating Capacity: 10.0 kW Cooling absorption: 2.64 kW Heating absorption: 2.70 kW Cooling water flow rate: 1270 l/h Heating water flow rate: 1710 l/h Sound power level : 69 dB(A) Sound Pressure Level : 54~56 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion tank Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FREE FIRST START-UP Technical features Product code : HMI140 Energy efficiency EER: 2.90 COP: 3.35 Energy Efficiency Class for low temperatures: A++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 12.0 kW Heating Capacity: 14.0 kW Cooling absorption: 4.14 kW Heating absorption: 4.18 kW Cooling water flow rate: 2080 l/h Heating water flow rate: 2500 l/h Sound power level : 70 dB(A) Sound Pressure Level : 55~57 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion tank Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FREE FIRST START-UP Technical features Product code : HMI100 Energy efficiency EER: 3.15 COP: 3.70 Energy Efficiency Class for low temperatures: A+++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 7.8 kW Heating Capacity: 10.0 kW Cooling absorption: 2.48 kW Heating absorption: 2.70 kW Cooling water flow rate: 1320 l/h Heating water flow rate: 1700 l/h Sound power level : 69 dB(A) Sound Pressure Level : 54~56 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion vessel Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FREE FIRST START-UP Technical features Product code : HMI080 Energy efficiency EER: 3.11 COP: 3.75 Energy Efficiency Class for low temperatures: A+++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 5.0 kW Heating Capacity: 7.5 kW Cooling absorption: 1.61 kW Heating absorption: 2.0 kW Cooling water flow rate: 860 l/h Heating water flow rate: 1240 l/h Sound power level : 65 dB(A) Sound Pressure Level : 51~53 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1150x758x345 mm Weight of Outdoor Unit: 96 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion vessel Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less