icon Offer Mini Chiller Daikin Heat Pump Inverter Air Water Ewyq010acv3p From 10 Kw Single-Phase R-410 | CaldaieMurali

Offer Mini Chiller Daikin Heat Pump Inverter Air Water Ewyq010acv3p From 10 Kw Single-Phase R-410

Description

OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER!

Technical features

  • Model : EWYQ010ACV3P

Energy efficiency

  • EER: 2.93
  • ESEER: 4.30
  • COP: 3.04
Performance
  • Cooling Capacity: 9.62 kW
  • Heating Capacity: 10.40 kW
  • Cooling absorption: 3.28 kW
  • Air Flow : 6000 m 3 /h
  • Cooling water flow rate: 0.453 l/sec
  • Heating water flow rate: 0.550 l/sec
  • Nominal head Cooling : 54.6 kPa
  • Nominal head Heating : 47.1 kPa
  • Sound power level : 64 dB(A)
  • Sound pressure level : 51 dB(A)

Electrical data

  • Type of Compressor : Scroll
  • Power supply (V,Hz, Ø) : 220~240/50/1
  • Refrigerant gas : R-410
Field of Operation
  • Water side cooling : 5° ~ 22° C
  • Water side heating : 25° ~ 50° C
  • Air side cooling : 10° ~ 46° CBS
  • Air side heating : -15° ~ 35° CBS
Installation data
  • Diameter of hydraulic pipe connections: 31.75 mm (5/4")

Dimensions and weight

  • Dimensions (HxWxD): 1435x1418xx382 mm
  • Empty weight: 180 Kg

Daikin Mini Chiller Systems Air cooled minichiller with Inverter

The Daikin Minichiller series dedicated to residential or small commercial applications , with nominal capacities from 5 kW to 13 kW, uses the inverter as a distinctive feature. The hermetic Swing compressor for sizes 005-007 kW and Scroll for the following ones 009-013 kW is driven by Inverter as well as the fans of the unit. High performance is therefore achieved at partial loads, control of the water delivery temperature at a fixed point, which can be used, for example, for radiant panel systems, and excellent acoustic performance at partial loads thanks to the simultaneous reduction of noise emission from both the compressor and of fan. The water content necessary for the correct operation of the unit is reduced thanks to the inverter, and can guarantee operation even without buffer tanks. The water-refrigerant exchanger is with brazed plates


Why the inverter ?

The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently.


Energy Saving Absorption proportional to the power supplied

The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ).


Ideal temperature Continuous regulation of power and noise

The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature.


Lower Plant Costs Reduction of water accumulation/content of the plant (-60%)

Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary.

Electrical advantages

From an electrical point of view, the Inverter introduces two great advantages:

Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed

More power available when needed

The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values ​​higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers.


Scroll compressor

Scroll compressors have two scrolls, one remains stationary while the other orbits eccentrically without rotating. Designed for small and medium capacities, they guarantee constant reliability and high efficiency throughout their operational life

Characteristics

  • Simple, compact and robust
  • Absence of valves and swing joint mechanisms, to ensure maximum reliability
  • Constant compression, to ensure a low level of energy consumption
  • Increased compression efficiency due to the absence of volumetric expansion
  • Low sound level
  • Low starting current
  • The Scroll compressor lends itself to the use of the Inverter, as on the range up to 13 kW, being able to guarantee high ESEER values, absence of peak and precise control of the outlet water temperature

Advantages:

› Extraordinary part load efficiency

› Inverter technology to ensure low noise and best-in-class ESEER values

› Wide operating range

› Integrated hydronic systems

› Easy “plug and play” installation

› Single-phase power supply for residential applications, three-phase power model available for small commercial applications


Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Offer Mini Chiller Daikin Heat Pump Inverter Air Water Ewyq010acv3p From 10 Kw Single-Phase R-410

Product form

OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWYQ010ACV3P Energy efficiency EER: 2.93 ESEER: 4.30 COP:... Read more

€2.800,00 Incl. VAT

    Description

    OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER!

    Technical features

    • Model : EWYQ010ACV3P

    Energy efficiency

    • EER: 2.93
    • ESEER: 4.30
    • COP: 3.04
    Performance
    • Cooling Capacity: 9.62 kW
    • Heating Capacity: 10.40 kW
    • Cooling absorption: 3.28 kW
    • Air Flow : 6000 m 3 /h
    • Cooling water flow rate: 0.453 l/sec
    • Heating water flow rate: 0.550 l/sec
    • Nominal head Cooling : 54.6 kPa
    • Nominal head Heating : 47.1 kPa
    • Sound power level : 64 dB(A)
    • Sound pressure level : 51 dB(A)

    Electrical data

    • Type of Compressor : Scroll
    • Power supply (V,Hz, Ø) : 220~240/50/1
    • Refrigerant gas : R-410
    Field of Operation
    • Water side cooling : 5° ~ 22° C
    • Water side heating : 25° ~ 50° C
    • Air side cooling : 10° ~ 46° CBS
    • Air side heating : -15° ~ 35° CBS
    Installation data
    • Diameter of hydraulic pipe connections: 31.75 mm (5/4")

    Dimensions and weight

    • Dimensions (HxWxD): 1435x1418xx382 mm
    • Empty weight: 180 Kg

    Daikin Mini Chiller Systems Air cooled minichiller with Inverter

    The Daikin Minichiller series dedicated to residential or small commercial applications , with nominal capacities from 5 kW to 13 kW, uses the inverter as a distinctive feature. The hermetic Swing compressor for sizes 005-007 kW and Scroll for the following ones 009-013 kW is driven by Inverter as well as the fans of the unit. High performance is therefore achieved at partial loads, control of the water delivery temperature at a fixed point, which can be used, for example, for radiant panel systems, and excellent acoustic performance at partial loads thanks to the simultaneous reduction of noise emission from both the compressor and of fan. The water content necessary for the correct operation of the unit is reduced thanks to the inverter, and can guarantee operation even without buffer tanks. The water-refrigerant exchanger is with brazed plates


    Why the inverter ?

    The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently.


    Energy Saving Absorption proportional to the power supplied

    The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ).


    Ideal temperature Continuous regulation of power and noise

    The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature.


    Lower Plant Costs Reduction of water accumulation/content of the plant (-60%)

    Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary.

    Electrical advantages

    From an electrical point of view, the Inverter introduces two great advantages:

    Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed

    More power available when needed

    The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values ​​higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers.


    Scroll compressor

    Scroll compressors have two scrolls, one remains stationary while the other orbits eccentrically without rotating. Designed for small and medium capacities, they guarantee constant reliability and high efficiency throughout their operational life

    Characteristics

    • Simple, compact and robust
    • Absence of valves and swing joint mechanisms, to ensure maximum reliability
    • Constant compression, to ensure a low level of energy consumption
    • Increased compression efficiency due to the absence of volumetric expansion
    • Low sound level
    • Low starting current
    • The Scroll compressor lends itself to the use of the Inverter, as on the range up to 13 kW, being able to guarantee high ESEER values, absence of peak and precise control of the outlet water temperature

    Advantages:

    › Extraordinary part load efficiency

    › Inverter technology to ensure low noise and best-in-class ESEER values

    › Wide operating range

    › Integrated hydronic systems

    › Easy “plug and play” installation

    › Single-phase power supply for residential applications, three-phase power model available for small commercial applications


    Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 150.0 kg
    • alimentazione: Single phase
    • gas: R-410
    • marca: Daikin
    • modello: EWYQ010ACV3P_1
    • potenza in kw: 10
    • tipologia : Air/Water
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account