Technical features Product code: 20100122   Energy label specifications according to the European ErP directive   Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Domestic hot water/heating nominal heat output: 24 kW Energy efficiency (92/42/EEC) ** Useful efficiency at Pn* (50°C-30°C): 89.8% Profit return 30% (47th return): 89.5% Open chamber, natural draft. Quantity of hot water with Δt 25°C: 13.8 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs Power supply: METHANE General characteristics RESIDENCE EXTERNAL Residence Externa is specifically designed for outdoor installation and stands out for its extremely small dimensions; built with specific materials to operate in absolute reliability even in difficult environmental conditions. Residence Externa is available in powers of 24 and 28 kW. High-efficiency hot water heat generator for both exposed (Residence Externa) and built-in (Residence IN) outdoor installation, consisting of: A wall structure with an open combustion chamber with natural draft. atmospheric primary air burner in stainless steel equipped with automatic ignition. ionization flame control and proportional regulation system of gas flow and air flow both in heating and DHW. CTR system for more rapid achievement of the desired comfort and a reduction in consumption, the formation of limescale in the boiler and temperature changes in the heating bodies. Low consumption circulator (IEE 0.20). Remote control panel and external probe (optional) allow you to activate the climate control. Double exchanger: domestic hot water production with plate exchanger. Coating in weather resistant material. electrical protection degree IP X5D. The equipment is completed by: Antifreeze function (up to -3°C for Residence Externa and up to -5°C for Residence IN): which protects the heating and DHW circuits up to -5°C with the possibility of extending the protection down to -15° C (optional) Antifreeze: when the boiler water temperature drops to around 7°C, the circulator is activated and remains in operation until the temperature rises to around 10°C; if, on the other hand, the temperature drops below 4°C, the burner also switches on at minimum power until, with the boiler in heating mode, the water temperature reaches 30°C; then the burner switches off and after 30” the circulator. Furthermore, when the temperature of the water in the DHW circuit drops to approximately 5°C, the circulator is activated and the burner ignites at minimum power until, with the boiler in DHW function, the temperature of the water in the boiler reaches 55°C; then the burner switches off and after 10” the circulator. Circulator anti-blocking: the circulator is activated for one minute approximately 18 hours after the last operating cycle. Three-way valve anti-blocking: the valve is activated to carry out an operating cycle (heating position and return to DHW position) approximately 18 hours after the last intervention . ErP: Energy related Products The new European regulations for heat generators ErP is the acronym for " Energy related Products " and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing energy consumption of products through eco-design (“eco-design”). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production. The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range. In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER VAILLANT AtmoTEC PRO BALKON VMW 240/5-3B LPG OPEN CHAMBER - ErP Technical features Wall-mounted boiler for outdoor use For heating and domestic hot water production Open chamber with natural draft DHW nominal heat input kW 24 ErP energy class (heating and DHW): class C/B Performance stars (according to Dir. 92/42CEE) - *** Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars (prEN 13203) - ** Expansion vessel capacity: 10 l Dimensions (hxpxl) mm 800 x 338 x 440 Code: 0010016271 Version: CNG or LPG atmoTEC PRO BALKON Wall mounted outdoor boiler for heating and domestic hot water Sanitary comfort even with low flow rates Intuitive display and simplified adjustments Reduced electricity consumption Suitable for outdoor installations down to -10°C (standard antifreeze) High efficiency pump. Copper primary exchanger Expansion vessel of 10 litres On board water sensor Energy efficiency class up to B depending on the model. The atmoTEC pro VMW balkon (heating and DHW production) are available in powers from 24 kW. Dedicated for outdoor installations, it guarantees operation down to -10°C. atmoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. Its simplicity of regulation makes it the ideal boiler for all users. atmoTEC pro is equipped with an extremely simple interface with plain text and backlit display. The reduced dimensions of atmoTEC pro VMW balkon 80cm high, 44cm wide and 35cm deep (identical to the previous version) allow installation in any environment. A new high-efficiency pump and new electronics allow atmoTEC pro to consume very little electricity, guaranteeing considerable savings throughout the year. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

START AR 29 KIS WALL-MOUNTED CONDENSING BOILER FOR HEATING AND HOT WATER FUME KIT INCLUDED LPG KASKO INSURANCE SHIPPING ON PLATFORM ErP technical data Seasonal space heating energy efficiency class B Water heating energy efficiency class A Declared load profile XL Heating technical data Nominal heat input (Hi) kW 28 Nominal heat output (80-60°C) 26.82 Warm-up exercise Maximum pressure bar 3 Maximum temperature 90 °C Membrane expansion vessel l 8 Sanitary technical data Nominal heat input (Hi) kW 28.00 Profit return 30% (30th return) % 100.6 Supply voltage V - Hz 230-50 IP X5D degree of protection NOx class 6 Dimensions WxDxH 400x332x780 mm; 37 kgs START AR Start AR is the condensing boiler specifically designed to operate with high temperatures and therefore with radiator systems. It is available in power ratings of 25 and 29 kW with low NOx emissions <56 mg/kWh. – Cooled burner – Low consumption circulator (IEE≤0.20) – Climatic regulation managed directly by the boiler control unit – Assembly crossbar, power supply cable supplied – Hydraulic connections available as an accessory – Degree of electrical protection IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heating nominal heat input: 30 kW Heating nominal heat output: 29.13 kW Classification European Directive EEC 92/42: ★ ★ ★ ★ Sanitary comfort ★ ★ ★ Expansion vessel capacity: 10 l Quantity of hot water with Δt=25°C: 17.2 l/min Minimum domestic water flow rate: 2 l/min Sanitary water temperature selection range: 35 - 60°C Total electric power: 125W Electrical protection degree: IP X5D NOx emission class: 5 Power supply: methane Characteristics Modulation 1:10 Low consumption modulating circulator (Class A) Patented condensing exchanger (Patent Pending) in aluminum with high flow rate Thermoregulation with standard external probe Standard hydraulic fitting cover For gas conversion, contact authorized Beretta Technical Assistance Centres Dimensions Dimensions (HxWxD): 845x453x358 mm Weight: 42Kg

Read more less

RIELLO RESIDENCE CONDENS 28 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heating heat input: 25 kW Sanitary nominal heat input: 28 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.7% Profit return 30% (47th return): 107.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 16.1 l/min Dimensions (hxlxp) mm 845 x 400 x 358 ; 39 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE General characteristics RESIDENCE CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER BAXI LUNA DUO-TEC+ 1.24 GA LPG COMPLETE WITH FUME EXHAUST KIT - NEW ErP HEATING ONLY Wall mounted condensing boiler, heating only ErP energy efficiency class (heating): A Heating nominal heat input kW 24.7 Heating rated thermal power kW 24 Efficiency at 100% Pn (80-60°C): 87.9% Useful return at 30%: 98% Minimum operating temperature °C -5 Expansion/pre-charge vessel capacity l/bar 8/0.8 Heating circuit water temperature adjustment °C 25-80 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 763 x 450 x 345 mm ; 38.5 kgs Power supply: LPG Luna Duo-Tec+ Wall mounted gas condensing boilers ideal for both new build and replacement The new Duo-tec+ range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as high efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models: heating only, with instantaneous DHW production, with integrated micro-accumulator, with integrated 40-litre accumulator. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide modulation range 1:7 the reduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Gas Adaptive Control The innovative GAC (Gas Adaptive Control) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Total modulation pump The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ?T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control High efficiency circulation pump with total modulation Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BAXI ECO5 COMPACT+ 24 Methane - NEW ErP Technical features ErP energy efficiency class (heating and DHW): C - B Load profile: XL Heating nominal heat input kW 26.3 Heating rated thermal power kW 24 Nominal direct return: 91.2% Efficiency at 30%: 89.3% Minimum operating temp. -5 Expansion/pre-charge vessel capacity l/bar 6/0.5 Heating circuit temperature range °C 30/85 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 13.7 Minimum domestic water flow rate I/min 2 Degree of protection IPX5D Rated electric power W 54 Dimensions (hxlxp): 730x400x298 mm ; 27Kg Power supply: METHANE Eco5 Compact+ Wall-mounted compact gas boiler, with natural draft for replacement in branched collective flues   Eco5 Compact+ is the Baxi compact natural draft boiler ideal for replacement. The extremely compact dimensions make this boiler particularly ideal for replacing old natural draft generators connected to branched collective flues, the only installation context allowed by the ErP directive for traditional open chamber boilers. The large display and programming keys allow easy and simple interaction with the boiler. ErP Energy Labeling Energy labeling - products Pn ≤ 70 kW (ref. Reg. 811 and 812 of 2013 implementing 2010/30/EU) The labeling directive (2010/30/EU) requires the labeling of products according to a scale decreasing energy ranging from A++ to G starting from 09/26/2015 and from A+++ to D from 09/26/2019. The label was created to allow the final consumer, by providing real and comparable data, to make informed choices and to focus on high-efficiency products. Characteristics: Compact dimensions 730x400x298 Easy access for maintenance of all components Compact hydraulic unit equipped with an anti-twist metal bar for safe installation Removable filter on the heating return circuit to protect the water/flue gas exchanger from impurities Antifreeze function and IPX5D degree of protection High efficiency circulation pump Arrangement for combination with the Baxi integrated solar system Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Junkers Bosch Cerapur Acu Smart ZWSB 30-4 E condensing boiler with boiler - New Declared load profile XL Energy efficiency class A Water heating energy efficiency class A Nominal thermal power Prated kW 23 Annual energy consumption (average climate conditions) QHE kWh - Annual energy consumption QHE GJ 72 Annual electricity consumption AEC kWh 33 Annual fuel consumption AFC GJ 19 Seasonal space heating energy efficiency ηS % 93 Water heating energy efficiency ηwh % 81 Sound power level indoors LWA dB 48 Useful thermal power At nominal heat output and high temperature regime P4 kW 22.8 At 30% of the nominal heat output and at low temperature P1 kW 7.6 Efficiency At nominal heat output and high temperature regime η4 % 87.6 At 30 % of the nominal heat output and at low temperature regime η1 % 97.8 Dimensions CERAPUR ACU SMART Cerapuracu-smart boiler: compact dimensions for unique performance Robust and reliable wall-mounted condensing boiler with boiler 3-star boiler health comfort according to European standards EN13203-1/2 High energy savings and possibility of connection with solar thermal systems Boiler installation in any context Advantages Boiler with boiler The robustness and reliability of this wall-mounted boiler are guaranteed thanks to the construction of the primary exchanger in Al-Si WB aluminium alloy. 3-star comfort The presence of the integrated 48-litre tank in the boiler has allowed it to be awarded the "3-star sanitary comfort" rating in terms of efficiency in the production of domestic hot water according to European Standards. Integrated climate control The boiler offers high energy savings, thanks to the integrated climate control (with external probe accessory) and the possibility of connection to solar thermal systems. Suitable for any context Boiler can be installed in any context thanks to the C6 approval which allows the use of any intake/exhaust system

Read more less

Technical features Model BASIC AND 24TH OPEN ROOM CNG Energy efficiency Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Performance Useful thermal power: 24.1 kW Energy efficiency stars: (dir 92/42/CEE) *** Maximum flow rate (Δt =25 °C): 13.8 l/min METHANE power supply Characteristics High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with BIASI solar systems using a solar kit Traditional control panel with knobs and LEDs. Dimensions hxwxd: mm 700x400x325

Read more less

Overview CHAFFOTEAUX ALIXIA S 24 CF EU LPG LPG BOILER - NEW ErP 2016 Cod. 3310492: Alixia S eu, with multifunction LCD display, contains in its simplicity all the technical characteristics necessary for optimal operation, guaranteeing reliable, practical and safe performance. Technical specifications Product code: 3310492 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiencyClass B Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat output in heatingÿmax/min:ÿ25.8/ 11.2ÿkW Useful heating power max/min:ÿ23.7/ 10.1ÿkW Nominal heat output max/min (sanitary) PCI:ÿ27/ 11.0 kW Max/min power in DHW mode:ÿ24.8/ 9.9 kW Efficiency at nominal heat input: 91.9% Efficiency 30% of nominal heat input:ÿ91.2% Outlet temperature range min/max temp.:ÿ35-85øC Sanitary comfort performance starsEN13203: *** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Port. specific in healthcare (10 min. with T= 30øC): 12.2 l/min Hot water flow rate at T 25§ C: 14.2 l/min Electrical protection degrees: IP X4D Dimensions hxwxd: mmÿ745x400 x307ÿ; 30kg LPG or LPG fuel supply Propan methane conversion kit supplied Features list Alixia S EU Alixia S eu, with multifunction LCD display, contains in its simplicity all the technical characteristics necessary for optimal operation, guaranteeing reliable, practical and safe performance Sanitary comforts Sanitary heat exchanger in stainless steelÿ 11.3 l/min sanitary flow according to standard EN625. Sanitary circuit managed by two probes and a sanitary flowmeter for better temperature stability based on the type of sampling. Heating comfort 3 stars of combustion efficiency according to the EN92/42 standard. Heating power of 24 kW. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Convenience of installation use Compact and perfectly adaptable to any type of home. Quick installation: predisposition for the use of the hydraulic bar (optional). Simplified maintenance: frontal access to all components. Prepared for integration with solar thermal systems (standard solar probe). Prepared for on/off environmental regulation with and without wires. LCD display with display: history, self-diagnosis, operating temperature. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

CHAFFOTEAUX PIGMA Ebus2 25 CF EU LPG -NEW ErP Technical features Product code: 3310440 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat output in heating max/min: 25.8/ 11.2 kW Max/min useful heating power: 23.7/ 10.1 kW Nominal thermal power max/min (sanitary) PCI: 27/ 11.0 kW Max/min power in DHW mode: 24.8/ 9.9 kW Efficiency at nominal heat input: 91.9% Efficiency at 30% of the nominal heat input: 91.2% Outlet temperature range min/max temp.: 35-85°C EN13203 sanitary comfort performance stars: *** Expansion vessel capacity: 8 l Maximum water capacity of the system: 100/300 litres Port. specific in healthcare (10 min. with ΔT= 30°C): 12.2 l/min Hot water flow rate at ∆T 25º C: 14.2 l/min Maximum absorbed power: 61 W Electrical protection degree: IP X4D Dimensions hxwxd: mm 745x400 x307 ; 30kg CNG or LPG power supply Kit for conversion from methane to propane supplied PIGMA Ebus2 EU Thanks to the compact dimensions, the sanitary comfort guaranteed by the 3-star performance and the digital display technology that allows optimal management of the heating, Pigma manages to create a comfortable environment, suitable for every type of need and installation. Sanitary comfort Sanitary heat exchanger in oversized stainless steel. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate from 14.2 to 15.8 l/min with ΔT = 25ºC. Controlled DHW production managed by two probes and a sanitary flowmeter for better temperature stability based on the type of withdrawal. Programmable on/off comfort function. Heating comfort 3-star combustion efficiency in accordance with the EN92/42 standard. SRA function, automatic boiler regulation system according to heating requirements. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the ambient and/or external temperature. Arrangement for integration into a heating system via the new Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Backlit LCD display with display: history, self-diagnosis, operating temperatures Comfort of use and installation Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier starting: automatic purge function and directly accessible combustion regulation. Compact and perfectly adaptable to any type of home. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX URBIA GREEN Ebus2 30 EU CONDENSING BOILER Cod. 3310408 COMPLETE WITH FUME EXHAUST KIT - NEW ErP 2015: Wall mounted condensing boilers with 4 liter mini-accumulator. Technical specifications Product code: 3310408 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Rated heat output max/min (Hi) Qn:ÿ28/3.0ÿkW Useful heating power80§ C/ 60§ C max/minÿ27.4/2.9ÿkW Useful heating power50§ C/ 30§ C max/minÿ29,7/3,1ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ30/ 6,5ÿkW Efficiency at nominal heat input:ÿ97.7% Efficiency 30% of nominal heat input:ÿ108.8% Energy efficiency stars: (dir 92/42/EEC) **** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Port. specific in healthcare (10 min. with T= 30øC): 14.9 l/min Hot water flow rate at T 25§ C: 16.8 l/min Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ745 x 440 x 445ÿ; 45kg LPG fuel supply or Features list URBIA GREEN Ebus2 EU Urbia Green is the ideal solution for all homes where the best performance is required. It is a concentration of advantages in terms of sanitary comfort with reduced dimensions and consumption. Thanks to condensing technology and integration with solar systems, it maximizes energy savings and the 4-litre sanitary reserve satisfies the needs of the most demanding users. Sanitary comfort Mini-accumulintegrated in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level unexpected by the EN 13203 standard. Flow rate from 14.6 to 19.3 l/min with T = 25§C. DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very low. DHW programmer to control the tank heating time slots Eco-Delta System: DHW load system with 4 liter reserve to further improve the comfort of DHW production and new ecological functions which allow you to save energy in DHW mode. Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. SRA function, automatic boiler regulation system according to heating requirements. Modulation wide range, from 10% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. Pressure sensor of the heating circuit with visualization on LCD display. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature. Arrangement for integration into a heating system via the newÿEbus2 communication protocolÿ(boilers, solar, system management modules, modulating thermoregulation accessories). Multifunction LCD display with display: history, self-diagnosis, operating temperature. Filling taps integrated in the boiler. Convenience of installation use Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 25% energy savings in combination with Expert Control and the SRA function. Final 35% energy savings combine and Expert Control, the SRA function, the external probe and the radiant floor. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less