icon Gas Boiler Riello Start 24 Ki - 24 Kw Methane Open Chamber - Erp | CaldaieMurali

Gas Boiler Riello Start 24 Ki - 24 Kw Methane Open Chamber - Erp

Description

Technical features

Product code: 20100122
 
Energy label specifications according to the European ErP directive
 
  • Class C heating energy efficiency
  • Sanitary energy efficiency profile XL Class B

Characteristics of heating/DHW operation:

  • Domestic hot water/heating nominal heat output: 24 kW
  • Energy efficiency (92/42/EEC) **
  • Useful efficiency at Pn* (50°C-30°C): 89.8%
  • Profit return 30% (47th return): 89.5%
  • Open chamber, natural draft.
  • Quantity of hot water with Δt 25°C: 13.8 l/min
  • Minimum domestic water flow rate: 2 l/min
  • Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs
Power supply: METHANE

General characteristics

RESIDENCE EXTERNAL

Residence Externa is specifically designed for outdoor installation and stands out for its extremely small dimensions; built with specific materials to operate in absolute reliability even in difficult environmental conditions. Residence Externa is available in powers of 24 and 28 kW.


High-efficiency hot water heat generator for both exposed (Residence Externa) and built-in (Residence IN) outdoor installation, consisting of:

  • A wall structure with an open combustion chamber with natural draft.
  • atmospheric primary air burner in stainless steel equipped with automatic ignition.
  • ionization flame control and proportional regulation system of gas flow and air flow both in heating and DHW.
  • CTR system for more rapid achievement of the desired comfort and a reduction in consumption, the formation of limescale in the boiler and temperature changes in the heating bodies.
  • Low consumption circulator (IEE 0.20).
  • Remote control panel and external probe (optional) allow you to activate the climate control.
  • Double exchanger: domestic hot water production with plate exchanger.
  • Coating in weather resistant material.
  • electrical protection degree IP X5D.

The equipment is completed by:

Antifreeze function (up to -3°C for Residence Externa and up to -5°C for Residence IN): which protects the heating and DHW circuits up to -5°C with the possibility of extending the protection down to -15° C (optional) Antifreeze: when the boiler water temperature drops to around 7°C, the circulator is activated and remains in operation until the temperature rises to around 10°C; if, on the other hand, the temperature drops below 4°C, the burner also switches on at minimum power until, with the boiler in heating mode, the water temperature reaches 30°C; then the burner switches off and after 30” the circulator. Furthermore, when the temperature of the water in the DHW circuit drops to approximately 5°C, the circulator is activated and the burner ignites at minimum power until, with the boiler in DHW function, the temperature of the water in the boiler reaches 55°C; then the burner switches off and after 10” the circulator.

Circulator anti-blocking:

the circulator is activated for one minute approximately 18 hours after the last operating cycle. Three-way valve anti-blocking: the valve is activated to carry out an operating cycle (heating position and return to DHW position) approximately 18 hours after the last intervention .


ErP: Energy related Products

The new European regulations for heat generators

ErP is the acronym for " Energy related Products " and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing energy consumption of products through eco-design (“eco-design”).

The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water.

From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players.

The energy labeling of products for heating and domestic hot water production.

The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class.

Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G.


A new way to guide the consumer


The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.

In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.

This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders.


Product Guarantee

All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Gas Boiler Riello Start 24 Ki - 24 Kw Methane Open Chamber - Erp

Product form

Technical features Product code: 20100122   Energy label specifications according to the European ErP directive   Class C heating energy... Read more

€608,00 Incl. VAT

    Description

    Technical features

    Product code: 20100122
     
    Energy label specifications according to the European ErP directive
     
    • Class C heating energy efficiency
    • Sanitary energy efficiency profile XL Class B

    Characteristics of heating/DHW operation:

    • Domestic hot water/heating nominal heat output: 24 kW
    • Energy efficiency (92/42/EEC) **
    • Useful efficiency at Pn* (50°C-30°C): 89.8%
    • Profit return 30% (47th return): 89.5%
    • Open chamber, natural draft.
    • Quantity of hot water with Δt 25°C: 13.8 l/min
    • Minimum domestic water flow rate: 2 l/min
    • Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs
    Power supply: METHANE

    General characteristics

    RESIDENCE EXTERNAL

    Residence Externa is specifically designed for outdoor installation and stands out for its extremely small dimensions; built with specific materials to operate in absolute reliability even in difficult environmental conditions. Residence Externa is available in powers of 24 and 28 kW.


    High-efficiency hot water heat generator for both exposed (Residence Externa) and built-in (Residence IN) outdoor installation, consisting of:

    • A wall structure with an open combustion chamber with natural draft.
    • atmospheric primary air burner in stainless steel equipped with automatic ignition.
    • ionization flame control and proportional regulation system of gas flow and air flow both in heating and DHW.
    • CTR system for more rapid achievement of the desired comfort and a reduction in consumption, the formation of limescale in the boiler and temperature changes in the heating bodies.
    • Low consumption circulator (IEE 0.20).
    • Remote control panel and external probe (optional) allow you to activate the climate control.
    • Double exchanger: domestic hot water production with plate exchanger.
    • Coating in weather resistant material.
    • electrical protection degree IP X5D.

    The equipment is completed by:

    Antifreeze function (up to -3°C for Residence Externa and up to -5°C for Residence IN): which protects the heating and DHW circuits up to -5°C with the possibility of extending the protection down to -15° C (optional) Antifreeze: when the boiler water temperature drops to around 7°C, the circulator is activated and remains in operation until the temperature rises to around 10°C; if, on the other hand, the temperature drops below 4°C, the burner also switches on at minimum power until, with the boiler in heating mode, the water temperature reaches 30°C; then the burner switches off and after 30” the circulator. Furthermore, when the temperature of the water in the DHW circuit drops to approximately 5°C, the circulator is activated and the burner ignites at minimum power until, with the boiler in DHW function, the temperature of the water in the boiler reaches 55°C; then the burner switches off and after 10” the circulator.

    Circulator anti-blocking:

    the circulator is activated for one minute approximately 18 hours after the last operating cycle. Three-way valve anti-blocking: the valve is activated to carry out an operating cycle (heating position and return to DHW position) approximately 18 hours after the last intervention .


    ErP: Energy related Products

    The new European regulations for heat generators

    ErP is the acronym for " Energy related Products " and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing energy consumption of products through eco-design (“eco-design”).

    The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water.

    From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players.

    The energy labeling of products for heating and domestic hot water production.

    The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class.

    Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G.


    A new way to guide the consumer


    The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.

    In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.

    This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders.


    Product Guarantee

    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 30.0 kg
    • classe energetica produzione acs: B
    • classe energetica riscaldamento: C
    • gas: Methane
    • marca: Riello
    • metri quadri : 120
    • modello: CALD_192105K
    • potenza in kw: 24
    • potenza nominale: 24
    • superficie riscaldabile mq: 120
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account