Open Chamber Boiler Hermann Saunier Duval MICRA 5 24 E Low NOx Methane - NEW ErP Product code 0010023634 Heating efficiency class C Sanitary efficiency class B Sanitary load profile XL Type Heating and domestic hot water Combustion chamber open Heating Fireplace output Qmin/max - 80/60°C (kW) 10.7 / 20.0 Rated power Pmin/max - 80/60°C (kW) 9.5 / 18.0 Min/max delivery temperature (°C) 35 / 83 Sanitary Domestic hot water production type Pre-heating Min/Max Rated Power (60°C) (kW) 9.5 / 24.0 Continuous flow - Delta-T = 25K (l/min) 13.6 Specific Flow - Delta-T = 30K (EN13203) (l/min) 11.7 Peak flow rate in 10 minutes (DT = 30K) 119 Domestic hot water temperature Min/Max (°C) 35 / 60 Electrical characteristics Electric power absorbed Max (W) 88 Dimensions Dimensions H / W / D (mm) 740 / 410 / 313 MICRA 5E Low NOx   Micra 5 E Low NOx was designed with the intention of offering Hermann Saunier Duval installers the ideal solution for replacing traditional boilers with high NOx emissions installed in branched collective flues (CCr): in fact, it features a new burner with low NOx emissions designed to reduce polluted emissions of nitrogen oxide (NOx) into the atmosphere and fully comply with the strict limits imposed by the Erp Regulation, in force since September 2018. Traditional wall-mounted boiler with low NOx emissions, combined for heating and water domestic hot water, ErP efficiency class C in heating, B in domestic hot water with XL profile. Micra 5 E Low NOx , a boiler at the top of its category in terms of consumption and polluting emissions, can feature the exclusive Aquaspeed system for the production of domestic hot water. The exclusive Aquaspeed system guarantees the immediate delivery of domestic hot water at the desired temperature: the preheating of the primary circuit and therefore also of the secondary stainless steel plate exchanger, allows an immediate response from the boiler to any sudden request from the user. Reliability and Hermann Saunier Duval standard quality Specification for branched collective rods (CCr) Low NOx emissions Aquaspeed system for high sanitary comfort Hot water immediately available with pre-heating The exclusive Aquaspeed® system guarantees the immediate delivery of domestic hot water at the desired temperature. The operation of the Aquaspeed® system is brilliant in its simplicity: the DHW exchanger is kept constantly at the set temperature; the hot water, passing through the preheated plates of the exchanger, reaches the taps already at temperature. The pre-heating, combined with the special oversized and externally insulated plate exchanger, allows an abundant quantity of domestic hot water even with low boiler temperatures. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Bluehelix Pro 25C Energy label specifications according to the European ErP directive Heating energy efficiency class: A Sanitary energy efficiency class XL profile: A NOx class : 5 Characteristics of heating/DHW operation: Heating Thermal Power: 25 kW Thermal Power in Sanitary: 27 kW Maximum Heating Power 80°C - 60°C : 24.5 kW Useful Thermal Efficiency 80°C - 60°C: 98% Useful Thermal Efficiency 50°C - 30°C : 106% Domestic hot water production Δt 30°C: 12.9 l/min Domestic hot water production Δt 25°C: 15.5 l/min Energy certification (92/42 EEC): **** Degree of protection: IP X5D Power supply: LPG Dimensions and weight Extremely Compact Dimensions (HxWxD): 600x400x320 mm Weight : 29Kg Ferroli boiler BLUEHELIX PRO Wall-mounted condensing boilers, premixed sealed chamber with instantaneous domestic hot water production BLUEHELIX PRO has been designed to guarantee maximum energy efficiency and performance both in heating and in the supply of domestic hot water thanks to the new bivalent exchanger in Aisi 316 Ti stainless steel. Built to be installed outdoors in partially protected places and equipped with electronics capable of integrating with a solar panel system. New series of compact wall-mounted condensing boilers with instantaneous domestic hot water production This new exchanger integrates the heating circuit and the production of instantaneous domestic hot water in a single element, thus optimizing the phenomenon of condensation. Bluehelix Pro achieves one of the highest energy efficiency of space heating in its category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ . The Range Bluehelix Pro is available in 2 models, both running on methane and LPG. Both the 25C model and the larger size, 32C, offer large volumes of domestic hot water, quickly, which can be further reduced by activating the "Comfort" function PLUS Product > New bivalent primary exchanger in Aisi 316 Ti stainless steel with “SELFCLEANING” function > High yields in both heating and domestic hot water production > Total premix burner in stainless steel > Electronic flame modulation both in heating and DHW > Digital control panel , complete with hydrometer > Can be combined with the modulating remote timer control . Programmable for one second > High efficiency modulating heating circulator (Erp Ready - Class A) > Refined design and compact dimensions > Casing painted white by anaphoresis with epoxy powders > Ease of access to internal components for any maintenance > 3-star certified comfort in sanitary production according to EN 13203, amended by Reg. 812/2013 > Sliding temperature operation via optional external probe > Digital flame control with three re-ignition attempts in the event of blockage due to lack of flame detection (methane model) > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass > Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit > IPX5D protection index, equivalent to excellent electrical protection of the boiler from liquids and foreign bodies > Achieves one of the highest seasonal space heating efficiency in its category: ηs 94% System energy class A+ , with the combination of the external probe and the Romeo modulating timer control Components The Exchanger The Ferroli design applied to the combined heat exchangers once again stood out for a simple and high-performance solution, made with the best materials Structure The exchanger consists of a concentric spiral without joints or welds. An additional pipe is inserted inside the main spiral - which serves the heating system - for the preparation of domestic hot water. The latter is not linked to the main coil, but remains immersed, in a "bain-marie" in the system fluid Self-Cleaning function The generous cross-section of the exchanger tubes allows for a free, ample passage of water. The serpentine conformation contrasts the deposit of impurities, not only due to the regularity of the path crossed by the water but also due to the "centrifugal" effect impressed on the water itself on the walls of the serpentine. Furthermore, the absence of circuits in parallel, both on the heating and DHW sides, makes any chemical washing operations of the exchanger and the elimination of any air present in the system circuit extremely easy. Full Condensation The integration of both the domestic hot water exchanger and the primary one in a single block reduces the average operating temperatures even during the production of domestic hot water. This favors condensation and gives the boiler high efficiency not only in heating, but also in domestic hot water Material The tube that makes up the Bluehelix Pro exchanger is made of AISI 316 ti stainless steel . It is a so-called austenitic alloy, particularly resistant to corrosion, enriched with the addition of titanium. it is also a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and after-effects Cheap Plus . Ecological. Efficient. Self-Adaptive The low-consumption circulator installed in the Bluehelix Pro has a variable flow rate, with ΔT control. The advantages offered are many, including: • System start-up from cold: faster start-up with full control of the thermal load on the components • Permanent maintenance of the temperature equilibrium conditions, once the set point has been reached • Better operation in limit conditions, reduction of on-of states • Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems Robust Others are the merits attributable to the circulator chosen for Bluehelix Pro: • The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator • Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity • Self-protection function in case of overheating • Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and stress from frequent on-off cycles Panel Boiler Control , Commands and Functions The BLUEHELIX PRO control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs. The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Romeo Chronothermostat Remote Control The BLUEHELIX PRO boiler can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. Comfort programming is on a weekly basis, even with a holiday function. Romeo is available with wired or wireless connection With the ROMEO Chronothermostat you can: • Adjust the heating and DHW temperatures • Know the operating status of the boiler • View the temperatures inside and outside the house • Restart the boiler in the event of a temporary block • Program the daily or weekly ambient comfort • Activate/deactivate the heating function via the telephone (dial not supplied) System energy class A+ in combination with the external probe and remote timer control The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Functions: ECO-COMFORT function: In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the dispensing of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation: By installing the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function: In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function: BLUEHELIX TECH has been designed to be easily inserted in systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. "SELF-CLEANING" function: Thanks to the "spiral" shape, the passage of domestic water inside the exchanger produces a "centrifugal" self-cleaning effect on the internal walls which tends to remove any limescale deposits. Tangible facts: Regulation 622/2012 provides that all boilers placed on the market from 1 August 2015 are equipped with a low-consumption circulator, otherwise defined as "class A". It is a decision that starts from the consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, i.e. by analyzing the impact of the low-consumption circulator integrated in the boiler, it reduces up to 30% of the total electricity consumption of the generator. max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix Pro, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Biasi rinNova boiler in 25S built-in condensing complete with methane fume exhaust kit * Model: RENEW IN E 35S Energy label specifications according to the European ErP directive * Class A heating energy efficiency * Sanitary Energy Efficiency Class A * Withdrawal profile: XL Characteristics of heating/DHW operation: * DHW useful thermal power: 33.4 kW * Useful heating thermal power: 32.1 kW * Nominal kW heat input(*): 34 kW * Efficiency at 100% load: 107.1% * Sanitary flow rate â??t =25°K l/min: 21.6l/min * IPX5D degree of protection * Dimensions hxwxd: mm 1200 x 600 x 240 * CNG or LPG powered Included in delivery * External probe * Siphon * Analog pressure gauge * Quick user instruction. RinNova RinNova IN E is the basic model of Biasi built-in condensing boilers. is available in the versions: Combi, in powers 25 and 35 kW Heating only, in the 16 and 25 kW powers in order to allow ample flexibility in the choice of systems and respond to the various residential needs. RinNova IN E therefore combines the high efficiency and low polluting emissions typical of premixed boilers with the space-saving feature typical of built-in boilers. Characteristics: High performance Primary condensing exchanger in stainless steel with plastic coating to offer maximum resistance to corrosion Total premix burner, built in AISI 316L stainless steel (Class NOx 5) Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Maximum power adjustable according to system requirements Degree of protection IPX5D Integration with BIASI solar systems through Unified box The RinNova IN E range (16SV, 25SV and S) can be installed in the universal box of dimensions 1200 x 600 x 240 mm. The RinNova IN E 35S model can be installed in the same box and requires a specific embossed central door to house the oversized exchanger of this model. Therefore RinNova IN E 35S is installed in a box with overall dimensions of 1200 x 600 x 255 mm: the embossed door causes an increase in depth towards the outside of only 1.5 cm. The box has been redesigned to facilitate the installation of BIASI products: Three front doors to allow easy access from the bottom door and front ejection. Hydraulic template of the box shown on the sheet metal itself to speed up the operation of connecting the boiler to the system. Simple assembly to reduce overall dimensions and wasted time on site! Class 5 NOx (EN297) The total premix burner optimizes the mixture of air and gas, maximizing yields and minimizing polluting emissions. Rinnova IN E belongs to the most restrictive class in terms of emissions with only 17 ppm of NOx produced, a quantity 5 times lower than the quantity of NOx produced by standard boilers. Sanitary (EN 13203) The domestic hot water comfort function ensures the best performance in terms of domestic hot water, reducing the waiting time for the availability of hot water and guaranteeing temperature stability. Boiler controls Rinnova IN E is equipped with a digital control panel to facilitate the selection of the desired temperature and the boiler parameters. The system pressure can be viewed on the display and on the pressure gauge, fitted as standard on the Rinnova IN E. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN THE ABSENCE OF THE PRODUCT THE NEXT MODEL "MICRA 4 CONDENSING 30 MIGO" WILL BE PROPOSED WITH A DIFFERENT PRICE Hermann Saunier Duval MICRA 4 CONDENSING 30 kW condensing boiler With Methane Fume Exhaust Kit - NEW ErP Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Domestic hot water production technology: Aquaspeed® Heating Nominal power P min/max heating 80/60 °C: kW 6.1/25.5 Partial load efficiency 30% 40/30 °C %: 108.5 Sanitary Rated power min/max (60 °C): kW 6/30 Specific flow rate (∆T=25 K): l/min 17 Continuous flow rate (∆T=30 K): l/min 145 Electrical characteristics Total absorbed electric power: W 75 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 700 x 390 x 280 mm CNG code (G20) - 10015679 METHANE version MICRA 4 CONDENSING The Micra 4 Condensing condensing boilers, ecological and performing, meet the highest standards in terms of efficiency and comfort, thanks to the exclusive Aquaspeed® technology for the production of domestic hot water. The range includes two combined models of 25 and 30 kW and 3 heating only models of 12, 26 and 30 kW. Characteristics Energy classification 4 stars **** (92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars ***(EN 13203-1), thanks to the Aquaspeed® system which guarantees the immediate delivery of domestic hot water at the desired temperature and the sanitary stainless steel plate exchanger with pre-heating function (Kombi models) The control panel on the boiler, with backlit liquid crystal display and negative contrast, makes adjusting Micra 4 Condensing extremely easy and immediate: with a few simple gestures it is possible to adjust the temperatures of the heating and domestic hot water, for any need . Solar Easy: all models in the Micra 4 Condensing range can be combined with solar systems, thanks to special kits. The small dimensions make all Micra 4 Condensing models perfect both for new systems and for replacement in existing systems. Continuous domestic hot water production (DHW) up to 18 l/min (Kombi models) • Low NOx emissions - class 5 (EN 483) Total premix burner and primary exchanger in anti-corrosion Aluminium-Silicon alloy High efficiency and modulating circulator Heating system antifreeze function Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

NB IN THE ABSENCE OF THIS PRODUCT, THE NEW MODEL WILL BE SUPPLIED: VICTRIX ZEUS 25! IMMERGAS VICTRIX ZEUS 26 KW METHANE CONDENSING BOILER WITH BOILER - COMPLETE WITH FUME EXHAUST KIT - ERP Technical features Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 23.6 kW; DHW power: 26.0 kW; Hot water production (∆t 30 °C) l/min: 15.6 Nominal Current: 0.78A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 8.0/5.8 L; Head available with flow rate 1000 l/h kPa (m wc) 31.0 (3.16); Healthcare services: Useful thermal power for hot water production (kcal/h) 32.0 (27,520) kW; DHW temperature °C 30 - 60: DHW pressure (min./max) 0.3/10 bar: Min. domestic hot water withdrawal 1.5 litres/min; Power supply: METHANE Benefits and functions: It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 45 liter stainless steel boiler which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 890x580x380mm; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION CNG, LPG AND PROPANE AIR OPERATION WITHOUT NEED OF KIT. THE TRANSFORMATION TAKES PLACE THANKS TO THE COMBUSTION CONTROL BY SELECTING THE TYPE OF GAS FROM THE TECHNICAL MENU. WE INVITE YOU TO CONTACT OUR SWITCHBOARD FOR FURTHER INFORMATION Technical features Model : Alteas One Net 24 Product code: 3301058 ( Methane Code ) Sealed chamber Energy label specifications according to the European ErP directive Class A heating energy efficiency (A+ achieved thanks to thermoregulation) Sanitary energy efficiency: Class A Withdrawal Profile : XL Nominal thermal power kW 22 Annual energy consumption in heating 38 gj Annual electricity consumption 49 kWh Seasonal space heating energy efficiency % 94 Water heating energy efficiency % 86 Sound power level inside 49 dB DHW flow rate ∆T 25 °C (l/min) 14.4 Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Indoor installation and partially protected places Power supply: methane Functionality: Connectivity integrated in the boiler HI-Comfort functions AUTO, Comfort, CARE Thermoregulation including CUBE thermostat + external probe Large display, touch interface XtraTech™ stainless steel heat exchanger ONE Series, the new generation of condensing boilers Serie ONE is the new generation of Ariston condensing boilers, studied down to the smallest detail to guarantee maximum performance for a long time New XTRATECH™ exchanger: Maximum quality XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger , the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+ ! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance ALTEAS ONE NET Top of the range condensing boiler, Italian design and integrated connectivity It represents the perfect combination of excellent performance and innovative design. The front panel in tempered glass, the HI-tech display and integrated connectivity make Alteas the perfect boiler for exclusive furnishing solutions. The efficiency of the boiler combines with the advantages of the Ariston NET service to control your system remotely, keep consumption under control and have peace of mind thanks to a technician who is always by your side. All via a simple free smartphone app! New XtraTech™ exchanger in exclusive* Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version Tempered and scratch resistant glass panel Large display, touch interface Ignition system, electronic combustion control Gas transformation from the technical menu Class A+ in heating, thanks to the Cube thermostat and external probe included as standard Modulation ratio 1:10 Ariston NET connectivity included in the boiler BusBridgeNet® communication protocol AUTO function, Comfort New CARE function, automatic reminder of routine maintenance Internal sound absorbing panels Installation in partially protected places Fumes discharge 80, 60, 50 m Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BAXI LUNA3 SILVER SPACE HT 240 CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT: Wall mounted gas condensing boilers for heating and DHW production; for outdoors. Technical specifications Domestic hot water/heating nominal heat input: 24.7 kW Domestic hot water/heating nominal heat output:ÿ24 kW Energy Efficiency(92/42/EEC): **** Average efficiency (DIN 4702-T8): 109.8%ÿ 30% yield: 107.6ÿ% Domestic hot water production T 25øC: 13.8ÿl/min Minimum domestic hot water flow rate: 2 l/minÿ Minimum operating temperature: -15°C Expansion/pre-charge capacity 8/0.5ÿl/bar Maximum length of the concentric 60/100 exhaust-intake tube: 10m Maximum length of the 80 split exhaust-intake pipe: 80 m NOx class (EN 483): 5 Degrees of protection IPX5D Rated Electric Power: 150W Dimensions (hxwxd): 830x550x250ÿmmÿ; 44 kgs Power supply: LPG Features list LUNA3 SILVER SPACE HT Wall-hung gas condensing boilers for heating and DHW production; for outdoors. Power range fromÿ24 kW Outdoor installation, minimum operating temperature: -15°C Controllremot with LCD display, with chronothermostat function for climate control unit, supplied as standard Arrangement for the management of an implantmist (high-low temperature) Automatic plant loading system Arrangement for combination with the integrated Baxi solar system Standard climate control (with optional external probe) Maximum protectionÿ Luna3 Silver Space HT boilers are certified with IPX5D degrees of protection which guarantees protection of the boiler's electrical components from water jets.ÿ Total gel devices Luna3 Silver Space HT boilers are particularly suitable for installation outside buildings as they have an anti-freeze function. heating and sanitary which allow the boiler to operate down to -15°C. When the temperature of the water in the circuits falls below 5°C, the sophisticated electronics of the boiler activates the anti-freeze function which automatically ignites the burner, avoiding water freezing phenomena. Special function The user can activate the SHOWER BUTTON directly from the control panel, thus momentarily varying the temperature of the domestic hot water, which after the interval will return to the usual value. Solar connection The ÿLuna3 Silver Space HT boilers are designed to be combined with the Baxi integrated solar system. The sophisticated electronics of ÿLuna3 Silver Space HT was designed to allow the boiler to be switched on only when the temperature of the water coming from the solar storage tank is reached ÿ lower than that requested. For installation, follow the warnings indicated in the instruction manual. External probe The ÿLuna3 Silver Space HT boilers are set up for climate control (external probe available as an option) to adapt theÿ system delivery temperature as a function of the external temperature. Series features: Hydraulic system: Electric three-way diverter valve Pre-mix burner in stainless steel Water/fumes exchanger in stainless steelÿwith external cladding in composite material Increased sanitary heat exchanger in stainless steelÿwhich allows the boiler to condense even inÿsanitary operation Modulating fan with electronic speed variation Automatic by-pass Circulation pump with adjustable speed, low consumption, built-in deaerator Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve 3 bar Thermoregulation system: Climatic adjustment as standardÿ(with external probe available as an option) Arrangement for connection to a zone system Heating programmer and ambient probeÿintegrated in the control panel Control system: Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switches which blocks the gas in case of water shortage NTC safety probe for fume overtemperature control Controlltemperature through NTC probes Total gel devices Electronic thermometer Heating circuit pressure gauge Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Overview BIASI PARVA RECUPERA E 24S LPG CONDENSING BOILER - NEW ErP 2015, WATERTIGHT CHAMBER COMPLETE WITH FUME EXHAUST KIT: PARVA Recupera E ErP condensing boiler with heat recovery unit. Technical specifications Model:ÿPARVA Recover E 24S Product code:ÿ10302.2011.3 Energy label specifications according to the European ErPÿ directive Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Thermal input:ÿ25ÿkW Rated useful power: 24.3 kW Nominal load efficiency:ÿ97.2% Efficiency minimum load:ÿ95.1% Energy efficiency stars: (dir 92/42/EEC) **** Min/max heating temperature: 38/85ÿøC Capacity of the expansion vessel: 6 lt Sanitary flow rate t =25øK l/min: 13.9 l/min Degrees of protection for the electrical system:ÿIPX4D Extremely compact dimensions hxwxd: mmÿ803x400x350ÿ; 47.5kg LPG fuel supply Features list ErP wall-mounted boilers with recuperator Redeveloping an old thermal systemÿ Biasi has designed the ÿPARVA Recupera NOx EÿandÿPARVA Recupera Eÿboilers to replace traditional boilers in old systems. The PARVA Recupera boilers by Biasi are equipped with a corrosion-resistant aluminum alloy fume recovery unit which makes these boilers particularly solid. The recovery unit is made of aluminium, has a finned coil which determines a large exchange surface and is equipped with a device to ensure that the boiler discharges the condensate correctly. The recuperator is treated with a Teflon coating process to ensure maximum durability over time. Thanks to the large exchange surface, the recuperator allows the recovery of thermal energy which would otherwise be dispersed outside through the hot fumes produced by combustion. PARVA Recover E PARVA Recupera E is the condensing boiler designed for traditional systems and easily adaptable to new floor-based systems using MULTIZONE, a hot water distribution system for heating. PARVA It recovers the traditional boiler in the regulations but it has clearly higher efficiency than the traditional boilers at the same operating temperature. As a condensing boiler, PARVA Recupera allows you to take advantage of the tax deduction according to current legislation. Characteristics: High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06ÿ Primary laminated copper heat exchanger with large double circulation exchange surfaceÿ Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the waterÿ Sanitary plate heat exchanger in INOXÿ steel High efficiency pump with low energy consumptionÿ retractable control panel, with ergonomic knobs and backlit displayÿ Electronic board for:ÿ - Re-ignition frequency adjustmentÿ - Adjustable primary circuit thermal inertia disposalsÿ - Selection of circulator modeÿ - Circulator anti-seizeÿ - Antifreeze safetyÿ - Chimney sweep functionÿ Integrated automatic by-passÿ Immunity to radio interferenceÿ Sanitary flowstat magneticÿ Absolute heating pressure switchÿ Degrees of protection IPX4Dÿ Possibility of integrating PARVA Recupera E with Biasi solar systems using the optional solar kit. Fiscal detraction As a condensing boiler, PARVA Recupera E allows you to take advantage of the tax deduction according to current legislation.ÿÿ Heat recoveryÿ The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator made of aluminum has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly.ÿÿ Thermoregulation By connecting the external probe (optional) directly to the boiler, you can access the climatic adjustment function. The boiler is equipped with a complete set of curves which can be accessed by entering programming. By simply turning a knob you choose the curve, PARVA recovers and will automatically adapt its operation to the external climatic conditions.ÿÿ High circulation primary heat exchangerÿ It is the element that distinguishes the whole PARVA E Biasi range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system, facilitating the transmission of heat to the radiators.ÿ Save simplicity of use Parva Recupera retains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler resulting from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at operating temperatures typical of radiator systems, leads Parva Recupera to have higher yields than traditional boilers. Low complexity, high comfort Parva Recupera boilers, despite the high technical content, are still very simple to use. Theÿcontrol panelÿhas two knobs dedicated to regulating the temperature of the domestic hot water and the heating water, the key to reset the boiler after the lockout status, the new display to view the boiler operating status and make it easier for the user to understand and installer settings . Fault diagnostics allow immediate verification of correct operation. The manometer allows you to check the system pressure while the temperature is shown on the display. Everything is hidden under a door that defines the sober and linear aesthetics of Parva Recupera. Included in delivery Boiler support bracket and paper templateÿ Condensate collection trapÿ Quick instruction to the user.ÿ All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's liability The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS MAIOR NIKE 24 Kw METHANE OPEN CHAMBER GAS BOILER Technical features Energy class in heating: C; Sanitary energy class: B; Heating performance: Max nominal heat input (kcal/h) 25.9 (22,307) kW Nominal heat input min. in heating (kcal/h) 10.7 (9,185) kW Useful thermal power (min./max) (kcal/h) 9.4/23.5 (8.084/20.210) kW; Healthcare services: Nominal heat input min. in DHW (kcal/h) 8.1 (6,928) kW; Useful heat output min. in sanitary (kcal/h) 7.0 (6,020); Nominal heating expansion vessel capacity 10.0 (8.0) litres; Electrical protection degree IP X4D; Power supply: LPG. General characteristics The MAIOR NIKE boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit LCD display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Designed to meet all the needs of its customers, the Immergas meior Nike boiler respects the environment (ErP), as well as guaranteeing the functions that preserve the integrity of the generator over time, it also has the function of managing the systems with solar system, capable of delaying ignition to optimize the reading of the incoming water coming from the solar tank. This function is even more performing with the aid of the DHW inlet probe kit. Finally, to facilitate installation, it is made up of unchanged attachments to ensure that it is replaced with other instantaneous wall-hung models in the Immergas range. Dimensions (HxWxD): 785x440x340; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

BIASI rinNOVA COND XE 35S CONDENSING BOILER COMPLETE WITH LPG LPG FUME EXHAUST KIT - NEW ErP Technical specifications: Energy label specifications according to the European ErPÿ directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XXL Characteristics of heating/sanitary exercises: Thermal powerÿuseful sanitaryÿ(80/60ø C)ÿkW (kcal/h)ÿ33.4 (28,724) Heating capacityÿuseful heatingÿ(80/60ø C)ÿkW (kcal/h)ÿ32.1 (27,606) Heat input(*)ÿnominalÿkW (kcal/h)ÿ34.0 (29,240) Heat inputÿminimumÿkW (kcal/h)ÿ8.5 (7,309) Sanitary flowÿt =25øKÿl/minÿ21.6 Dimensions (HxWxD) 700x400x290 mm Main features renew COND Xÿ RinNova Cond X The BIASI premixed condensing range completes: perfectÿfor underfloor systems for radiator systems, the compact condensing boiler that ensures high yields, low consumption and respect for the environment. Availableÿfor heating and domestic hot water production, in powers of 25 and 35 kW and forÿheating only in powers of 16, 25 and 35 kW. Characteristics: High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfortÿÿ(EN 13203) Primary and condensing exchanger in stainless steel with plastic linings to offer maximum resistance to corrosion Total premix burner, built in stainless steel (class NOx 5) Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Maximum power adjustable according to the needs of the system Degrees of protection IPX5D Installability in a partially protected place Integration with BIASI solar systems using a solar kit digital control panel with backlit display Digital pressure reading by pressure transducer Arrangement for external probe remote control Four-controllers Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital pressure reading DHW and heating temperature visualization from display Display of fault diagnostics, fault history block status View recommended fill View annual maintenance expiry The display operates according to the modes: INFO. Inf mode displays the following information: External temperature (in case of connected external probe) K value (in case of connected external probe) Sanitary / heating temperatures chosen by the user Smoke temperatures. 2. PROGRAMMING. The programming mode allows you to modify the boiler parameters. In chimney sweep mode it is possible to test the boiler and make adjustments to the gas valve. RinNova Cond XE: Adjustable maximum power The adjustable maximum useful heating power parameter meets the needs of modern construction without compromising comfort required in the production of domestic hot water. In fact, this function makes it possible to limit the maximum useful power in heating, independently of the useful domestic power. Hot water even with the sun RinNova Cond XE for heating and hot water production: the sanitary exchangerÿin stainless steel combined with the electronic management and low inertia of the primary exchangerÿdetermine excellent performance even in the production of domestic hot water.ÿFor the production of domestic hot water RinNova Cond XE can be combined with BIASI solar systems using specific solar kit (optional). The boiler cuts in only when necessary, making the most of solar energy and guaranteeing the comfort required by the user. Included in delivery: Boiler support bracket and paper template Boiler power cable Condensate collection siphon Quick instruction to the user. All ready for Energy Labeling What it is about: From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: energy label ; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices product datasheet ; technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations: ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THIS PRODUCT IS MADE TO ORDER. SHIPPING TAKES PLACE WITHIN 10 WORKING DAYS FROM THE DATE OF PURCHASE RIELLO RESIDENCE EXTERNA CONDENS 32 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT -NEW ErP Technical features Product code: 20096735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.5% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 275 ; 46 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE RESIDENCE EXTERNAL CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor installations Residence Externa Condens is specifically designed for outdoor installation and stands out for its extremely small dimensions. Equipped as standard with the exclusive Riello condensing exchanger, completely made of aluminum and without welding, synonymous with efficiency and durability, resistant to system dirt with high heads and excellent heat exchange. The climatic regulation is managed directly via the boiler board: this allows the temperature of the heating system to be suitably adapted to the external climatic conditions. Residence Externa Condens is controlled directly from inside the home thanks to the exclusive remote control supplied as standard. Residence Externa Condens is available with powers from 20 to 32 kW. Characteristics: Remote control panel supplied as standard Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) Antifreeze function that protects the heating and DHW circuits down to -5°C with the possibility of extending the protection down to -15°C (optional) "Winter with Pre-heating" function: allows the DHW exchanger to be maintained at temperature, reducing waiting times during withdrawal (instantaneous combined models) Possible "open-air" installation using the special waterproof kit (optional) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO evoDENS HE 25S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG METHANE FUME EXHAUST - NEW ErP;ÿSTAINLESS STEEL wall-mounted condensing boilerÿ Technical specifications Model:ÿevoDENS HE Product codeÿLPG: 103021021000 Product codeÿMETHANE: 103121029000 Technical features: Heating/sanitary nominal heat inputkW 20.0 / 26.0 Yield name 60ø/80øC * % 96.7 Yield min. 60ø/80øC * % 92.4 NOx class no. 6 Minimum / maximum heating temperature****øC 25 / 80 Minimum / maximum heating pressurebar 3.0 / 0.3 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Maximum flow rate (T=25 K) / (T=35 K) l/min 14.4 / 10.3 Specific sanitary flow rate (T=30 K) ***** l/min 12.0 Voltage / Power at nominal heat input V~/ W 230/100 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxDÿmm 700x400x290; 32.7Kg Boiler water content l 2 Main features EvoDENS HE The new range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger Evodens HEÿis the new SAVIO range ofÿwall-mounted condensing boilersÿ: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large displays. Available in versions for heating and domestic hot water production and for heating onlyÿEvodens HEÿpresents a complete range of powers, 25 and 35 kW combi models and 25 and 35 SV models, in the same extremely compact dimensions (700 x 400 x 290 mm).ÿ Evodens HEÿhas the strong point in the innovative heat exchanger designed to provide high yields that last in the digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire SAVIO condensing range, ÿEvodens HEÿallows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. MAIN FEATURES: High yields (in compliance with yield directive 92/42ÿCEE and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary condensing exchanger in stainless steelÿwith aluminum linings to offer maximumÿresistance to corrosion Total premix burner, built in stainless steel (Class NOx 5) Modulation 1:10 Methane also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tanks High efficiency PWM pump with low power consumption variable speed Maximum power adjustable according to the system Degrees of protection IPX5D Can be installed in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel Digital pressure reading Arrangement for remote control of external probe Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems. High circulation single coil primary exchangerÿSavi produces the new Steelcoil compound exchanger with a stainless steel spiral enclosed in an aluminum shell. Thanks to the large exchange surface of the coil, greater thermal efficiency is guaranteed with less loss of charge and easier cleaning. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product which can be used on new systems but also on old systems in the case of renovations. Steelcoil integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the monspira. Does the absence of parallel circuits guarantee an easy cleaning operation? of the exchanger and the elimination of any air present in the system circuit. CONTROL PANEL Summer/winter/off selector Heating temperature regulator Sanitary temperature regulator Digital pressure reading Domestic hot water and heating temperature visualization from the display Display of fault diagnostics, fault history block status Refill ViewÿRecommended Refill Guide Display of months remaining until annual maintenance is due External temperature displayÿ(with external probe connected) andÿindication of external probeÿconnected and K value set Flame modulation display Visualization of SavioÿSOLCONTROL solar control unit connected to EVODENSÿHE, active solar pump and solar integration DHW comfort functionÿselectable by means of a dedicated keyÿand programmable Ingressdirectl the INFO menu dedicated to the user. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. EVODENS HE will adapt the water temperature of the system to the external climatic conditions, guaranteeing the achievement of the desired room temperature without waste and optimizing consumption. By using climatic regulation, the regulation efficiency also rises, giving greater value to your home. Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less