Buy wall mounted condensing boilers for maximum energy savings. Reliable performance, optimum efficiency and compact design. Choose from our selection of condensing boilers to heat your home efficiently and sustainably. Find out more today!
Wall mounted condensing boilers
HERMANN SAUNIER DUVAL Hermann Saunier Duval Themafast Condens 25 Cs/1 Methane Boiler Complete With Low Nox Fume Exhaust Kit - New
AVAILABLE TO ORDER Hermann Saunier Duval Themafast Condens 25 CS/1 Methane boiler complete with low NOx fume exhaust kit - New Model: Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60°C kW 3.1 - 20.4 Sanitary Specific flow rate (∆T = 25K) (EN13203) l/min 14.8 Peak flow rate in 10 minutes (∆T = 30K) l/10 min 123 Dimensions (HxWxD) 740x418x344 ThemaFast Condens All the comfort, immediately. Characterized by a renewed design with modern and essential lines, flat casing to facilitate installation in the home and touch-screen user interface, the new ThemaFast Condens range is positioned at the top of its category in terms of sanitary comfort and consumption reduction . The exclusive Aquaspeed FAST® system and the new 3-litre micro-accumulator ensure immediate delivery of domestic hot water - even in the case of minimal withdrawals - and maximum temperature stability. The new FlameFit® combustion technology is able to autonomously adapt to the different types of gas, always managing to generate perfectly efficient combustion in total safety. The range consists of three models of 25, 30 and 35 kW with methane fuel, convertible to propane through simple electronic regulation. Hydraulic connections and dimensions are unchanged compared to the previous version Superior sanitary comfort New 3 liter microaccumulator Immediate delivery of domestic hot water Maximum temperature stability New FlameFit® combustion technology High modulation up to 1:9 Modern design with touch-screen user interface New diagnostics and malfunction detection Aquaspeed FAST® and new microaccumulator: unique comfort Thanks to the exclusive Aquaspeed FAST ® technology , the domestic hot water is stored in a 3-litre micro-accumulator which guarantees the immediate availability of hot water without the temperature fluctuations typical of the first delivery phase. The new micro-accumulator, made of stainless steel and composite material, is insulated with two expanded polystyrene shells to reduce heat losses in stand-by. Externally, a small resistance (max 25 W) keeps the water always at the desired temperature, avoiding costly multiple ignitions of the burner in case of low flow rate withdrawals. When the withdrawal is greater than 1.7 litres/min, the boiler starts up and, through the instantaneous DHW exchanger, goes into continuous production according to the user's requests. At the end of the withdrawal, the micro-accumulator is already at the set temperature, ready for the next request. FlameFit® technology: more efficiency, less consumption and emissions The innovative FlameFit® combustion technology with which all ThemaFast Condens models are equipped allows the boiler to be independently adapted to the different types and qualities of gas, always guaranteeing optimized and fully safety. In fact, the flame control electrode detects the varied characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the operation of the boiler to the actual needs of the user, with consequent energy savings, reduction of consumption as well as polluting emissions . FlameFit® technology makes ThemaFast Condens ready for operation with any type of future gas, without the need for conversion kits. New touch screen user interface The interface of the new ThemaFast Condens has a modern digital touch display and has been designed to simplify boiler management by the user as much as possible. The symbology of the various keys and the "talking messages" that can be viewed on the display allow for a rapid understanding of the main functions and how to set parameters according to one's comfort needs. All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.620,00
-
BERETTA Beretta Ciao X 25 CA Condensing Low Nox 6 Boiler Complete With Methane Fume Exhaust Kit - New Erp Cod. 20197875 Wi-Fi Optional
Beretta CIAO X 25 C low NOx 6 condensing boiler complete with METHANE fume exhaust kit - NEW ErP cod. 20197875 Optional Wi-Fi Technical features Code: 20197875 Energy label specifications according to the European ErP directive Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Heating thermal capacity (max-min) 20.0 - 3.1 kw Nominal DHW heat input (max-min) 25.0 - 3.1 kw Supply voltage V-Hz 230 - 50 IP degree of protection IPX5D NOx class 6 CNG power supply HEATING Max pressure-temperature bar-°C 3-90 Membrane expansion vessel l 8 SANITARY Max pressure bar 8 DHW production at ?T= 25 °C / 30 °C / 35 °C l/min 14.3/11.9/10.2 Minimum DHW flow l/min 2 DIMENSIONS, WEIGHT Boiler dimensions (HxWxD) mm 700x400x275 HELLO X, the comfort you deserve CIAO, ONE OF THE BEST-SELLING WALL-MOUNTED BOILERS EVER IN THE BERETTA PORTFOLIO, HAS BEEN COMPLETELY REDESIGNED, CREATING A NEW CONDENSING RANGE WITH MANY INNOVATIVE FEATURES AND ADVANTAGES: CIAO X The new Beretta range retains the distinctive characteristics of the previous models of the same name in terms of reliability and ease of use, adding many other important and innovative features: from the new primary heat exchanger in stainless steel , to the innovative touchpad interface up to the DIN standard hydraulic connections. With CIAO X, Beretta enhances the search for comfort and innovation with respect for the environment, which represents one of the strengths of the brand, starting from its origins. This renewed energy awareness translates into high efficiency, low consumption and a high modulation ratio (1:8), which combined with installation flexibility, compact dimensions and low weight, allow CIAO X to be placed at the top of its category. But there's more. HELLO X looks forward to future generations. The new range can already process a mixture of hydrogen up to 20%, the source of sustainable energy that will be the real ecological turning point in the coming years THE RANGE Ciao X is available in a complete range of 5 models, to meet the various needs of heating: CIAO X 25 C (combined, with dedicated codes for methane and LPG) CIAO X 30 C (combined) CIAO X 15 R (heating only) CIAO X 25 R (heating only) The compact dimensions and low weight of CIAO X allow it to be installed practically anywhere in the home, even in a wall unit in the kitchen. The product can also be installed outside the home (recessed in a BOX or in a partially protected place). CHECK YOUR COMFORT WITH A TOUCH One of the distinctive features of the new CIAO X is the digital touchpad interface, which combines design and innovation with ease of use. With a simple touch on 7 points of the panel, you can intuitively access all the settings and the boiler and system parameters. Each touch activates a buzzer, which generates acoustic feedback to confirm the operation. The LCD display communicates with the user and the installer through icons, without using texts, in order to allow an immediate understanding of the displayed function. EVERYWHERE HELLO X The soft and essential lines of the innovative touch control give CIAO X a modern and pleasant character, which facilitates integration into any context. The compact dimensions and low weight allow the boiler to be easily installed practically everywhere, not only inside the home, but also outside (recessed in a box or in a partially protected place). CIAO X is therefore ideal for replacing old boilers, both with DIN and Beretta connection sequences, thanks to the availability of accessory kits that simplify conversion. A wide range of accessories completes the CIAO X offer: flue kits, compact water filters (softener and magnetic) and cover of the hydraulic connections, facilitating their installation and harmonizing their integration, both indoors and outdoors. NEW STAINLESS STEEL CONDENSING EXCHANGER CIAO X is equipped with a new primary exchanger in stainless steel , with a smooth tube with a large section, to ensure excellent efficiency and cleanliness over time. Stainless steel, in addition to the high resistance to the corrosive action of acid condensate, prevents the internal formation of oxides and other electrochemical phenomena typical in installation on old systems. The single wrapped coil geometry (hydraulic circuit in series) ensures constant flow in all sections of the exchanger and intrinsically prevents clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber NEW FUNCTIONS FOR GREATER COMFORT IN SANITARY In the combined models, the high-performance plate exchanger, connected to the primary hot water circuit, allows domestic hot water to be heated instantaneously, without the need for an external boiler. The new sanitary exchanger has been optimized by Beretta to obtain high performance and maximum comfort for the end user in terms of temperature stability and reduced waiting times. These pluses, which place CIAO X at the top of the reference category, ultimately translate into water and energy saving, for greater respect for the environment. Here are some of the special functions of CIAO X: The PREHEATING function and its evolution in PREHEATING SMART have been designed to further reduce water and gas consumption. In fact, these functions make it possible to keep the water warm inside the new high-efficiency plate exchanger, produced in our factories, while reducing waiting times. The TOUCH & GO function allows you to activate instant pre-heating, only for a specific request. Other special functions such as DOMESTIC DELAY, ANTI-OSCILLATION, SMART FAN allow to improve the performance of the boiler in particularly difficult operating conditions, such as for example in the case of very low or very high inlet water temperature, or a very shallow water HI, COMFORT YOUR COMFORT AT YOUR FINGERTIPS CIAO X* IS COMPATIBLE WITH HI, COMFORT, THE NEW IOT SOLUTION PLATFORM BY BERETTA, WHICH ALLOWS TO MANAGE COMFORT IN A SIMPLE AND INTUITIVE WAY The end user can manage the home climate with the traditional HI, COMFORT T100 thermostat control, via the new HI, COMFORT App, which can be connected to the thermostat via the Wi-Fi box. The new App can be downloaded free of charge for Android and iOS systems and allows you to monitor the status, remotely set the domestic hot water temperature and define the boiler settings in a simple and safe. Furthermore, installing HI, COMFORT T100 is quick and easy and, in case of replacement of an old thermostat, does not require interventions on the electrical system of the house. HI, COMFORT T100, battery powered, also allows "wireless" installation, if the system is equipped with a radio frequency receiver SMART KEY K100 The new CIAO X range was created ready for the K100 Smart Key, an accessory designed for the latest generation Beretta condensing boilers, which marks their evolution towards increasingly eco-sustainable comfort. The Smart Key K100, through the App proprietary HI, COMFORT, allows you to know the operating status of the boiler, change its parameters and much more, all remotely. The various functions of the Smart Key K100 are certainly of interest to the user: from the "Bottle Function", to protect children and non-self-sufficient users from the risk of burns, to the "Booster Function", to maximize speed heating the environment, up to the "Wellness Function", to maintain a constant hot water temperature for maximum comfort and much more, all to be discovered. And for users who are increasingly attentive to the environment, it is possible, through the HI, COMFORT App, to monitor and manage the use of energy in their heating system, saving up to 15%* of consumption and avoiding unnecessary waste. For a sustainable future CIAO X is born ready to work with mixtures of natural gas and hydrogen - up to a maximum of 20% - a first important step towards achieving the objectives of environmental sustainability and the path of decarbonization initiated by the European Union. Availability in huge quantities Producibility using low-impact methods and in a sustainable way from renewable sources, such as wind energy, photovoltaics and biomass Reduction of polluting emissions in the percentage relative to its use Real opportunity for change to start the decarbonization process, fight global climate change, improve air and life quality Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€645,00
-
Riello Riello Start Ar 25 Kis Low Nox Condensing Boiler Cod. 20176940 Complete With LPG Fume Exhaust Kit - New
MURAL Riello START AR 25 Kis LOW NOx condensing boiler cod. 20176940 complete with LPG fume exhaust kit - NEW Seasonal space heating efficiency class B Water heating energy efficiency class A HEATING Nominal heat input (Hi) kW 25.00 Nominal thermal power (80÷60 °C) kW 23.95 SANITARY Nominal heat input (Hi) kW 25.00 Nominal thermal power (*) kW 25.00 CHARACTERISTICS Nox class - UNI EN 483 6 Quantity of hot water at ∆t 25°C l/min 14.3 Dimensions HxWxD mm 715x405x250 LPG supply START AR 25 The new START AR is the condensing boiler specifically designed to operate with high temperatures and therefore with radiator systems. Still improved in performance, it is available in a power of 25 kW with reduced NOx emissions <56 mg/kWh. New digital interface Even more compact dimensions also for built-in Innovative gas-air combustion system Hydraulic connections with DIN sequence Cooled burner Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Mounting crossbar, power supply cable supplied Hydraulic connections available as an accessory IPX5D electrical protection degree NEW DIGITAL INTERFACE START AR is equipped with a modern backlit display which allows immediate and complete reading of the information, also through the language of icons. Six intuitive keys allow you to easily make adjustments and access parameter configuration. INNOVATIVE POST-EXCHANGER Stainless steel finned pack heat recovery unit, in thermoplastic container, ideal for high temperature systems. Preheating function of the primary circuit, using the residual heat of the exhaust fumes and of the low NOx cooled burner. Reduced need for cleaning. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€800,00
-
Ferroli Ferroli Bluehelix Tech Rrt 24c Low Nox Methane Condensing Boiler Complete With Smoke Exhaust Kit
ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance IN THE ABSENCE OF THIS ITEM, THE BLUEHELIX ALPHA 24 MODEL WILL BE SHIPPED Technical features Model : Bluehelix Tech RRT 24C Energy rating Heating energy efficiency class: A DHW energy efficiency class: A ACS profile : XL Performance Heating thermal capacity: 5.0 ~ 20.4 kW Heating thermal power 80°C / 60°C : 4,9 ~ 20,0 kW Heating thermal power 50°C / 30°C : 4,9 ~ 20,0 kW DHW thermal capacity: 5 ~ 25.0 kW Sanitary thermal power: 4.9 ~ 24.5 kW Minimum efficiency 80°C / 60°C : 97.8% Maximum efficiency 80°C / 60°C : 98.0% Minimum efficiency 50°C / 30°C : 107.5% Maximum efficiency 50°C / 30°C : 106.1% G20 gas pressure : 20 bar G31 gas pressure : 37 bar NOx emission class : 6 Heating operating pressure: 0.8 ~ 3 bar Maximum heating temperature: 90°C Heating expansion vessel capacity: 8 litres DHW operating pressure: 0.3 ~ 9 bar Domestic water flow rate ∆t 25°C : 14 l/min Domestic water flow rate ∆t 30°C : 11.7 l/min Degree of protection : IP X5D Power supply (V,Hz, Ø) : 220~240/50/1 Dimensions and weight Dimensions (HxWxD): 700x420x250 mm Empty weight: 28.0 kg 5 years without worries Ferroli BLUEHELIX TECH RRT boiler Ecological wall-hung condensing boilers with Ferroli Thermobalance™ combustion cell The evolution continues.. The range of generators is equipped with the tested AISI 304 stainless steel exchanger. Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX TECH RRT is at the top of its category. BLUEHELIX TECH RRT achieves one of the highest energy efficiency of space heating in the boiler category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ Extended warranty with the "5 YEARS WORRY-FREE" formula The quality of Bluehelix TECH RRT is unquestionable, and Ferroli is ready to put it to the test by offering its customers extended warranty coverage which also ensures periodic maintenance and legal checks TOP efficiency even on old systems The exchanger of the THERMOBALANCE™ thermal group by Bluehelix TECH RRT compared with the more classic and widespread steel exchanger used in the past also by the Ferroli Group exclusively on a small series of boilers produced for the English market, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in Bluehelix models This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments, for example due to installation on old systems, the exchanger tends to blockage much faster in the part in contact with the flame due to the reduced passage area of the fluid, in which a real barrier of deposits is formed which hinder the heat exchange and reduce the efficiency below the nominal values . Product plus > Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt > It reaches one of the highest seasonal space heating efficiency in its category: ηs 94% and in combination with the modulating remote control and the optional external probe it reaches the top efficiency class > Class 6 NOx : already in line with the provisions of the ErP regulation, NOx emissions < 56mg/kWh. > MC 2 : M ulti C ombustion C ontrol, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network, such as fluctuations or reduced pressures. > MGR : Methane LPG R eady, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits > Exclusive exchanger-burner system with self-cooled door without insulators: it simplifies maintenance and reduces its cost thanks to a smaller number of perishable parts. > Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger > Hydraulic connections covered by the boiler shell > Large backlit multifunction graphic display for easy and correct parameter setting > Standard by-pass > Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes > FPS : Fumes Protection System . The flue clapet valve fitted as standard on the boiler allows easy connection to pressurized collective flue systems > Designed to simplify and facilitate normal maintenance and cleaning operations > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > ECO function in DHW for greater savings in the period of low use of hot water > 3-star certified comfort in sanitary manufacturing according to EN 13203 > Sliding temperature operation via optional external probe > Low consumption modulating heating circulator > Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection, only for methane operation > Place of installation : also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Innovative Ferroli THERMOBALANCE TM heating unit in its 5 elements Ferroli has oriented the design of the combustion cell and of the Bluehelix TECH RRT exchanger in order to maximize the functional advantages and the constructive sturdiness, as well as the simplicity of maintenance: the single-circuit design means that any air bubbles in the system do not remain trapped in the exchanger, and facilitates cleaning with chemical washing as much as possible, unlike spiral exchangers with double parallel circuit in which if only one of the circuits gets blocked, chemical washing is much more laborious. High flow single circuit stainless steel heat exchanger, resistant to clogging and easy to clean Self-cooled burner door without insulating panel Exclusive special stainless steel hemispherical burner with long-life gasket Intelligent “ Gas-adaptive ” system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary Offset fan, to facilitate maintenance of the thermal group without disassembly. Integrated smoke anti-reflux clapper for connection to CCS The engine Combustion cell The tube that makes up the BLUEHELIX TECH RRT exchanger is made of AISI 304 stainless steel , a material that allows for the creation of an extremely smooth surface , therefore less susceptible to encrusting agents and deposits. TOP quietness The new design for comfort The particularly careful design of BLUEHELIX TECH RRT has made it possible to achieve significant values in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections. Remote control Environment and climate BLUEHELIX TECH RRT can be combined with a wide range of remote timer controls that allow remote control and control of the appliance. The ROMEO series is made up of several models, with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With the connection to the external probe, BLUEHELIX TECH RRT is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, guaranteeing the user greater comfort as the external climatic conditions vary. This function is internal to the electronic board of the boiler and therefore does not require the presence of the remote control , making the configuration operations easier in case of replacement. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Boiler control Control panel and functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs . The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems MC 2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC 2 : Multi Combustion Control , the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance" tm thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - Internal accessibility is favored by the 3-piece shell with removable side panels. - The electrical box of the electronic card can be easily extracted from the chassis and hooked laterally, leaving free access to the internal parts - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit - The burner door is totally self-cooled by air and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. - The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections . - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Simplified replacement Smoke outlet ø 50 mm The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters. FPS .: Fumes Protection System . The flue clapet valve allows easy connection to pressurized collective flue systems . For installers, the solution of the collective pressure pipe is cheaper Comfort & Safety The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life of the appliance Stop And Go function With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these " false starts " can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TECH RRT provides an electronic parameter through which it is possible to delay the ignition of the burner by activating it only in the face of actual withdrawals of domestic hot water Sun Easy function BLUEHELIX TECH RRT has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user Sanitary Eco-Comfort function In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable . Reaching maximum comfort certified 3 stars. The efficiency and load profiles according to the ErP directive are at the top of the category External installation and antifreeze function To make the most of the available space, the new BLUEHELIX TECH RRT 24C boiler can be installed recessed into the wall using the special kit. For more critical installations, in completely uncovered places not protected from the elements, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost . This function is active with the boiler powered by the gas circuit and under electrical voltage Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€717,00
-
HERMANN SAUNIER DUVAL Hermann Saunier Duval Condensing Boiler Semiatek Condens 24 As/1 Kw Methane Complete With Smoke Kit - New
NB: IN CASE OF ABSENCE OF THE PRODUCT WE WILL SEND THE SIMILAR MODEL THEMATEK CONDENS Gas Boiler Hermann Saunier Duval SEMIATEK CONDENS 24 AS/1 kW Methane Complete with Smoke Kit - New Select the smoke kit in the drop-down menu! Technical features Model : Semiatek Condens Power : 24 kW Methane gas Heating efficiency class: A Sanitary efficiency class: A Sanitary load profile XL Heating features Rated power Pmin/max - 80/60°C kW 6.0 - 18.3 Efficiency Pmax - 80/60°C - 50/30 °C % 97.2 - 106.4 Sanitary features Rated power min/max - 60°C kW 6.2 - 24.0 Specific flow rate (∆T = 30K) (EN13203) l/min 11.5 generals NOx class - 6 Electrical protection IPX - 5 Absorption - Stand-by / Pmax W 1.7 - 90 Dimensions (HxWxD) mm 626x400x270 Semiatek Condens The optimal solution for heating and domestic hot water preparation. Excellent value for money, both for new builds and replacements It can be retrofitted into existing heating and hot water supply systems Heat exchanger in stainless steel 3 year guarantee The SemiaTek Condens boiler is available in 24 and 28 kW methane power. The most important novelty concerns the renewed primary exchanger , the old one in Al-Si has been replaced by the one in stainless steel which, through a simple adjustment of the gas valve, also allows operation with propane. Innovation also from the point of view of combustion : complete premixing with new fan-push technology where the fan in the new position upstream of the burner guarantees the right ratio between air and gas by applying a proportional pressure value which guarantees the opening of the gas valve without waste. The project has been developed to offer the optimal solution in terms of price , performance and quality . SemiaTek Condens also features a new design of the ultra-compact hydraulic block with new location of the key components, while still maintaining a good level of efficiency, performance and adequate comfort in both heating and domestic hot water production. Characteristics The new design of SemiaTek Condens offers an innovative touch screen interface of extreme simplicity with 6 keys, display with black background and 2 white digits with intermittent ignition, the indication of the boiler status is defined by the intermittent ignition of the icon selected. SemiaTek Condens is compatible with all Hermann Saunier Duval components and accessories already on the market. SemiaTek Condens can also be combined with the MiGo WiFi control unit. The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Ease of installation SemiaTek Condens is very simple to install thanks to its small size - 62.6cm high, 40cm wide and 27cm deep - and low weight. Even the vertical hydraulic connections have been designed to facilitate and speed up installation. For these reasons, it is the ideal solution for replacing old systems. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€708,00
-
Biasi Biasi Renew Adaptive 25s Low Nox Condensing Boiler Complete With Methane Or LPG / LPG Fume Exhaust Kit
Biasi rinNova adaptive 25s low NOx condensing boiler complete with methane or LPG fume exhaust kit Heating/DHW nominal heat input kW 21.0 / 26.0 Heating/DHW minimum heat input kW 3.0 / 3.0 Heating/DHW maximum useful power 60°/80°C * kW 20.7 / 25.6 Heating/DHW minimum useful power 60°/80°C * kW 2.8 / 2.8 Heating/DHW maximum useful power 30°/50°C ** kW 22.8 / 28.2 Heating/DHW minimum useful power 30°/50°C ** kW 3.2 / 3.2 Yield name 60°/80°C * % 98.4 Yield min. 60°/80°C * % 94.0 Yield name 30°/50°C ** % 108.6 Yield min. 30°/50°C ** % 105.2 NOx class 6 Minimum/maximum heating pressure bar 0.3 / 3 Expansion tank capacity (total/useful) l 7 Maximum flow rate (ΔT=25 K) / (ΔT=35 K) l/min 15.4 / 10.7 Specific sanitary flow rate (ΔT=30 K) ***** l/min 12.8 Voltage/Power at nominal heat input V~/ W 230 / 100 Power at minimum thermal capacity W 52 Degree of protection IPX5D Height x Width x Depth mm 700 x 400 x 300 Weight kg 31.5 Boiler water content 2.0 l Code 20312.0221.0 RinNova adaptive The RinNova Adaptive condensing boiler , unlike traditional boilers, allows you to recover energy by condensing the water vapor contained in the exhaust fumes; that is, for the same amount of heat produced, it consumes less gas and furthermore the exhaust fumes contain fewer substances which are harmful to the environment. The materials that compose it and the regulation systems with which it is equipped offer safety, high comfort and energy savings, so as to be able to fully appreciate the advantages of autonomous heating. RinNova Adaptive is the new BIASI model of wall-mounted condensing boiler . It offers excellent performance and high yields that last over time, thanks to the innovative heat exchanger . Simple to use thanks to the digital control panel, with a display designed to communicate with the user easily and comfortably. Technical features Boiler with single circuit primary exchanger in stainless steel, without joints and/or welds, which maintains high efficiency even on older systems New combustion system with patented gas-adaptive technology (Advanced Adaptive Gas Combustion Control – A²GC²) The electronics continuously analyze the combustion (CO2) through the flame signal and intervene by acting on the gas valve and fan, to allow correct combustion in all terms of use. The electronics allow the boiler to be easily adapted to the various types of gas without having to intervene with a mechanical transformation kit Instant production of domestic hot water with dedicated plate exchanger Domestic hot water pre-heating function: faster delivery of domestic hot water User interface with display and multifunction keys for adjusting and setting the parameters Easy to inspect standard by-pass Chimney Protection System: electronic management of fume overheating, guaranteeing maximum protection of the chimney Ducting on flues: particularly suitable for operation in flues that require ducting with high pressure drops Minimum polluting emissions (class VI - EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection (methane configuration) Removable casing in three pieces for easier maintenance or inspection For SV versions: possibility of setting the maximum power that can be supplied to the external boiler Gas-adaptive technology Less consumption, more efficiency, fewer emissions The innovative Adaptive Gas technology, which all models in the Rinnova line are equipped with, allows the boilers to be adapted in complete autonomy to the different types and qualities of gas. The electrode, in addition to detecting the flame, also detects the characteristics of the gas and automatically adapts the combustion parameters to maintain the maximum level of efficiency, with a consequent reduction in consumption and emissions compared to traditional control systems. The Adaptive gas system makes the boiler ready to operate with any type of gas without transformations. Automatic gas regulation Adaptation to changing gas quality Clean combustion The only model suitable for methane and LPG which allows you to optimize the warehouse In traditional boilers, the combustion values are detected and adjusted only during maintenance, furthermore the composition of the gas network is not always constant and can create operating inefficiencies on boilers without combustion control devices, compromising reliability, savings and the quality of emissions. Thanks to the Gas-Adaptive system, the new condensing boilers electronically control combustion by managing the gas and air supply at best and at all times, automatically adapting the CO2. A "Plastic-FREE" production For a more sustainable environment A fundamental element that guided the entire design phase of the new Rinnova Adaptive boiler is the strong focus on the circular economy. For this we have used components with a higher rate of recyclability, eliminating the use of plastic as much as possible. The plastic group, for example, has been replaced with the brass group, a completely recyclable material. The protective shells of the boiler were made of cardboard and no longer of polystyrene. Furthermore, the front is no longer in plastic but in pressed steel. Thermoregulation Climatic regulation (with optional external probe) and ambient regulation (remote) to allow correct management of the water temperature in order to reduce consumption and consequently a reduction in emissions. By using the climatic regulation, the regulation efficiency also rises, giving greater value to the home. High circulation single coil primary heat exchanger Biasi, introduces the Round heat exchanger in 2017. The great reliability has been demonstrated by adopting it in the Renew Adaptive range. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€930,00
-
BAXI Baxi Condensing Gas Boiler Nuvola Duo-Tec+ 24 Ga Model With 40 Liters Methane Or LPG Accumulation Complete With Smoke / LPG Exhaust Kit
ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 24.7 Heating nominal heat input kW 20.6 Sanitary nominal thermal power kW 24 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.7% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 7.5/0.8 Sanitary water temperature adjustment °C 35-60 Boiler capacity 40 l Boiler expansion vessel capacity/pre-charge l/bar 2/2.5 Sanitary water production ∆T 25°C l/min 13.8 Sanitary water production at discharge ∆T 30°C (1) l/30' 385 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (hxlxp): 950x600x466 mm ; 62 kgs Power supply: CNG or LPG Cloud Duo-Tec+ Digital control panel The Duo-tec E range of boilers is equipped with a new digital control panel with an even more backlit LCD display, clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and of the heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way. Efficiency and savings Wide modulation range: greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adaptation of the thermal power produced to the power dissipated thus avoiding excessive overheating / cooling of the premises GAC Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: there are no manual interventions – reduced measurements, calibrations with this system, the boiler self-adapts to the quality of the gas (methane) and to the length of the flue gas pipes, keeping the efficiency constant the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions. Fully modulating pump with de-aeration The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs. During the first ignition phase, we recommend activating the automatic de-aeration function. This function eliminates the presence of air in the heating circuit and therefore avoids any blockages of the boiler, overheating of the system, etc. Guidelines in case of replacement of a conventional boiler with a new condensing one There are two main problems that can be encountered: Flues and smoke exhaust duct Condensate drain To overcome the above, Baxi recommends: the use of a Ø50 mm exhaust pipe Baxi has in fact developed a system that allows easy ducting in existing flues (for 24kW models). For condensing boilers, the novelty is brought about by the low temperatures of the fumes which allow the use of specific plastic materials; however, in the presence of existing 316 stainless steel flues, installed correctly and with gaskets suitable for receiving damp fumes, there are no problems and they can easily be reconnected to the new boilers while it is absolutely not compliant with the use of aluminum flues or smoke pipes . In fact, aluminum is a metal that is not resistant to the acid condensates present in the fumes. (*) Each Ø50 mm diameter bend decreases the length of the drain by 4m the use of the condensate drain pump Baxi has designed this kit to collect the condensate produced by condensing boilers for domestic use: the pump allows the creation of condensate drainage systems in the absence of natural drainage near the boiler. The operation of condensing boilers determines the formation of condensate, due to the principle of condensation. This water therefore needs to be disposed of through special drains. If there is no adequate slope and therefore it is not possible to dispose of the condensate by gravity, it is necessary to install a pump that conveys it towards the drains. The pumps used are also equipped with special non-return valves to avoid bacterial contamination due to any stagnation and return of the waste water. The use of buildings avoiding the use of annoying pipes. Characteristics : Wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Up to 500 l of hot water in 30 minutes (ΔT 30°C) 40 l stainless steel kettle Digital control panel with large backlit LCD display Compatibility with the Baxi Mago (optional accessory) for remote boiler control DHW expansion vessel available as STANDARD (for 33 kW mod.) and as an accessory (for 24 kW mod.) Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW total length 40 meters (intake+exhaust) STANDARD installation kit (gas cock / DHW inlet / telescopic fittings) hydraulic system Electric three-way diverter valve Pre-mix burner in stainless steel Flue water exchanger in stainless steel Stainless steel kettle Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar 8 bar boiler safety valve Sanitary expansion vessel (2 litres) standard for mod. 33 GA VES Sanitary recirculation arrangement Thermoregulation system Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the gas in case of water shortage Safety thermostat against fume overheating Temperature control using NTC probes Anti-legionella function Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.540,00
-
Ferroli AREA OCCASIONI Caldaia a Condensazione Ferroli DIVACONDENS D PLUS F24 Metano LOW NOx Completa di kit scarico fumi - NEW ErP
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA BOZZATURE ED AMMACCATURE SULLA PARTE FRONTALE E POSTERIORE DEL PANNELLO ESTERNO, LA BOX IN PLASTICA DEI COMANDI HA SEGNI DI RIPARAZIONI A CALDO, SUPPORTO BOX COMANDI NON DI SERIE E L'IMBALLO USURATO. (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) ATTENZIONE ! La caldaia verrà fornita a metano, per il funzionamento a GPL bisogna rivolgersi al Centro Assistenza Autorizzato di zona. Caratteristiche Tecniche Modello : Divacondens D Plus Potenza Termica nominale : 24 kW Alimentazione : Metano Specifiche Efficienza Energetica secondo direttiva Europea ErP Classe Efficienza Energetica Riscaldamento : B Efficienza Energetica Stagionale per il Riscaldamento d'ambiente : 89% Performance Portata Termica Riscaldamento : 7,5 ~ 25,0 kW Potenza Termica Riscaldamento : 7,2 ~ 24,2 kW Rendimento Termico Ultile 30% Pmin : 100,1 % Produzione Acqua Calda Sanitaria 25°C ?t 30°C : 13,9 ~ 11,6 l/min Emissioni NOx 6 Dimensioni e Peso Dimesioni (LxHxP) : 400x700x330 mm Peso : 35 Kg Caldaia Ferroli Divacondens D Plus La Soluzione Più Semplice Per Una Caldaia a Condensazione DIVACONDENS D PLUS è il generatore di calore a condensazione per i sistemi di riscaldamento tradizionali. La collaudata tecnologia Ferroli nel campo delle caldaie murali tradizionali è stata arricchita incrementando le prestazioni del prodotto nel modo più semplice, con l’utilizzo di un robusto recuperatore che preriscalda il circuito primario utilizzando il calore residuo dei fumi di scarico e di un nuovo bruciatore raffreddato a basse emissioni di NOx. La Gamma Divacondens D Plus è proposta in un unico modello per riscaldamento e produzione istantanea di acqua calda sanitaria Caratteristiche> Caldaia a condensazione per il riscaldamento di impianti ad alta temperatura e produzione di acqua calda sanitaria. Non risulta idonea all’abbinamento con mandata diretta ad impianti con pannelli radianti a bassa temperatura > Scambiatore primario a geometria compatta > Produzione istantanea di acqua calda sanitaria con scambiatore a piastre dedicato > Post-recuperatore del calore latente di condensazione, in funzione di pre-riscaldo del circuito primario > Caldaia a camera stagna e tiraggio forzato, con bruciatore atmosferico raffreddato ad acqua a basse emissioni di NOx > By-pass idraulico automatico di serie > Minime emissioni inquinanti (classe 6 secondo EN 15502-1) > Circolatore alta efficienza a basso consumo (ErP - Classe A) con sistema antibloccaggio tramite attivazione per alcuni secondi ogni 24 ore di inattività > Abbinabile al cronocomando remoto modulante > Pannello comandi semplice e completo, interfaccia utente a display, con tasti di impostazione > Robusto post-condensatore alimentato dal circuito chiuso del primario. Lo scambio termico con i fumi avviene all’interno di passaggi d’acqua di grande diametro. > Generatore dal funzionamento semplice e razionale > Funzione ECO in sanitario per un maggior risparmio nel periodo di scarso utilizzo di acqua calda > Predisposizione impianti solari: predisposta per la produzione di acqua calda sanitaria combinata con impianti a pannelli solari > Luogo di installazione: anche per esterno in luogo parzialmente protetto fino a -5°C di serie > Funzionamento certificato anche ad aria propanata (50% aria - 50% G31) mediante apposita trasformazione da richiedere al Centro Assistenza Autorizzato > Funzionamento anche a GPL con l’utilizzo di un apposito kit di conversione da richiedere al Centro Assistenza AutorizzatoControllo in caldaia La centralina di controllo di DIVACONDENS D PLUS consiste in un’interfaccia facile da usare con display retroilluminato. Tramite i pulsanti è possibile regolare facilmente la temperatura di mandata riscaldamento, il setpoint dell’acqua calda sanitaria, accendere / spegnere il generatore o attivare la funzione confort, monitorando lo stato della caldaia. Il pannello di controllo è completato da un manometro tradizionale che può controllare in qualsiasi momento la pressione dell’impianto.Le performanceClassificazione energetica Profilo di carico sanitario (massima portata alla corrispondente efficienza dichiarata in sanitario) Efficienza nella produzione di acqua calda sanitaria PER CALDAIE COMBINATE Il pacchetto “clima-energia 20/20/20” prevede ambiziosi obiettivi di riduzione dell’emissione di gas serra, dei consumi energetici nonché l’incremento dell’uso di energie rinnovabili, corrispondenti ad una percentuale del 20% da raggiungere entro il 2020. In questo ambito, il regolamento europeo ErP (Energy Related Products) introduce una classificazione energetica anche per i generatori di acqua calda ai fini del riscaldamento d’ambiente e dell’acqua calda sanitaria. Tale classificazione si traduce in una etichetta energetica che deve obbligatoriamente accompagnare tutti i prodotti interessati dal Regolamento, introdotti nel mercato dal 26 settembre 2015. L’etichettatura costituisce una facile guida per il consumatore, che può scegliere - tramite indicazioni standardizzate ed oggettive - il prodotto più efficiente. In questo modo la scelta sarà la più parca nei consumi a vantaggio dell’utente, ma anche la più virtuosa per gli equilibri energetici e di conseguenza, per l’ambiente. I parametri più significativi indicati nell’etichetta sono l’indice di efficienza stagionale in riscaldamento e di efficienza nell’eventuale produzione di acqua calda sanitaria, secondo una scala che nel caso del prodotto singolo caldaia si attesta dalla A alla G*. Inoltre per le caldaie combinate viene indicato un profilo di carico corrispondente alla portata sanitaria dell’apparecchio misurata in una serie di prelievi-tipo, garantendo almeno l’efficienza in sanitario dichiarata. Tale indice viene identificato con una lettera/”taglia” (S, M …XXL).Integrazione circuito solareDIVACONDENS D PLUS vanta una elettronica che semplifica l’integrazione con sistemi solari termici, sia a circolazione naturale sia forzata. Il microprocessore controlla la temperatura dell’acqua proveniente dal circuito solare attraverso il sensore di acqua calda sanitaria e accende il bruciatore solo in caso di necessità. Per il raggiungimento della temperatura desiderata, SUN EASY permette un notevole risparmio anche durante le stagioni più fredde, sfruttando e integrando anche il più piccolo contributo solare, altrimenti perso. In caso di irraggiamento insufficiente e quindi un preriscaldo modesto dell’acqua sanitaria, la caldaia contribuirà con il calore necessario per raggiungere la temperatura di setpoint richiesta. Qualora il sole e il sistema solare assolvano al loro “dovere” non sarà necessaria nessuna integrazione da parte della caldaia, l’acqua calda verrà convogliata al rubinetto, senza necessità di dispositivi addizionali, con la miscelazione delle valvole termostatiche.Sicurezza e comfortANTIGELO Nell’eventualità che la temperatura in caldaia scenda a 5°C, il bruciatore si accende automaticamente e il circolatore si attiva al fine di preservare l’apparecchio dai danni causati dal gelo. Tale funzione è attiva con la caldaia alimentata dal circuito gas e sotto tensione elettrica. POST-CIRCOLAZIONE Questa funzione permette di recuperare tutto il calore fornito per inerzia termica dello scambiatore e trasferirlo al sistema di riscaldamento, e di conseguenza ai locali da riscaldare. Si tratta di una funzione timer (di durata personalizzabile) ed è attiva dopo che il bruciatore si spegne in modalità di riscaldamento. FUNZIONAMENTO IN TEMPERATURA SCORREVOLE Con l’installazione del kit “Sonda esterna” è possibile far funzionare la caldaia in temperatura scorrevole. Ciò significa che senza agire sui tasti di regolazione della temperatura di impianto, la caldaia si autoregolerà in funzione delle variazioni delle temperature esterne. Tutto questo si traduce in risparmio energetico pur garantendo il massimo comfort all’utente. EASY CONTROL La scheda elettronica di DIVACONDENS D PLUS adotta il protocollo Opentherm. Esso permette l’integrazione di altre centraline periferiche come, ad esempio, il cronocomando remoto ROMEO. Lo standard Opentherm infatti è stato appositamente studiato per condividere le logiche e gli algoritmi di funzionamento della caldaia con altre centraline aggiuntive. In quanto protocollo digitale, consente una totale integrazione tra caldaia e satellite, con il pieno controllo delle funzioni dalla caldaia e similmente dal suo satellite. Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€425,00
-
Ferroli AREA OCCASIONI Caldaia a Condensazione Ferroli DIVACONDENS D PLUS F24 Metano LOW NOx Completa di kit scarico fumi
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA BOZZATURE SULLA PARTE FRONTALE, LEGGERA AMMACCATURA LATERALE E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) ATTENZIONE ! La caldaia verrà fornita a metano, per il funzionamento a GPL bisogna rivolgersi al Centro Assistenza Autorizzato di zona. Caratteristiche Tecniche Modello : Divacondens D Plus Potenza Termica nominale : 24 kW Alimentazione : Metano Specifiche Efficienza Energetica secondo direttiva Europea ErP Classe Efficienza Energetica Riscaldamento : B Efficienza Energetica Stagionale per il Riscaldamento d'ambiente : 89% Performance Portata Termica Riscaldamento : 7,5 ~ 25,0 kW Potenza Termica Riscaldamento : 7,2 ~ 24,2 kW Rendimento Termico Ultile 30% Pmin : 100,1 % Produzione Acqua Calda Sanitaria 25°C ?t 30°C : 13,9 ~ 11,6 l/min Emissioni NOx 6 Dimensioni e Peso Dimesioni (LxHxP) : 400x700x330 mm Peso : 35 Kg Caldaia Ferroli Divacondens D Plus La Soluzione Più Semplice Per Una Caldaia a Condensazione DIVACONDENS D PLUS è il generatore di calore a condensazione per i sistemi di riscaldamento tradizionali. La collaudata tecnologia Ferroli nel campo delle caldaie murali tradizionali è stata arricchita incrementando le prestazioni del prodotto nel modo più semplice, con l’utilizzo di un robusto recuperatore che preriscalda il circuito primario utilizzando il calore residuo dei fumi di scarico e di un nuovo bruciatore raffreddato a basse emissioni di NOx. La Gamma Divacondens D Plus è proposta in un unico modello per riscaldamento e produzione istantanea di acqua calda sanitaria Caratteristiche> Caldaia a condensazione per il riscaldamento di impianti ad alta temperatura e produzione di acqua calda sanitaria. Non risulta idonea all’abbinamento con mandata diretta ad impianti con pannelli radianti a bassa temperatura > Scambiatore primario a geometria compatta > Produzione istantanea di acqua calda sanitaria con scambiatore a piastre dedicato > Post-recuperatore del calore latente di condensazione, in funzione di pre-riscaldo del circuito primario > Caldaia a camera stagna e tiraggio forzato, con bruciatore atmosferico raffreddato ad acqua a basse emissioni di NOx > By-pass idraulico automatico di serie > Minime emissioni inquinanti (classe 6 secondo EN 15502-1) > Circolatore alta efficienza a basso consumo (ErP - Classe A) con sistema antibloccaggio tramite attivazione per alcuni secondi ogni 24 ore di inattività > Abbinabile al cronocomando remoto modulante > Pannello comandi semplice e completo, interfaccia utente a display, con tasti di impostazione > Robusto post-condensatore alimentato dal circuito chiuso del primario. Lo scambio termico con i fumi avviene all’interno di passaggi d’acqua di grande diametro. > Generatore dal funzionamento semplice e razionale > Funzione ECO in sanitario per un maggior risparmio nel periodo di scarso utilizzo di acqua calda > Predisposizione impianti solari: predisposta per la produzione di acqua calda sanitaria combinata con impianti a pannelli solari > Luogo di installazione: anche per esterno in luogo parzialmente protetto fino a -5°C di serie > Funzionamento certificato anche ad aria propanata (50% aria - 50% G31) mediante apposita trasformazione da richiedere al Centro Assistenza Autorizzato > Funzionamento anche a GPL con l’utilizzo di un apposito kit di conversione da richiedere al Centro Assistenza AutorizzatoControllo in caldaia La centralina di controllo di DIVACONDENS D PLUS consiste in un’interfaccia facile da usare con display retroilluminato. Tramite i pulsanti è possibile regolare facilmente la temperatura di mandata riscaldamento, il setpoint dell’acqua calda sanitaria, accendere / spegnere il generatore o attivare la funzione confort, monitorando lo stato della caldaia. Il pannello di controllo è completato da un manometro tradizionale che può controllare in qualsiasi momento la pressione dell’impianto.Le performanceClassificazione energetica Profilo di carico sanitario (massima portata alla corrispondente efficienza dichiarata in sanitario) Efficienza nella produzione di acqua calda sanitaria PER CALDAIE COMBINATE Il pacchetto “clima-energia 20/20/20” prevede ambiziosi obiettivi di riduzione dell’emissione di gas serra, dei consumi energetici nonché l’incremento dell’uso di energie rinnovabili, corrispondenti ad una percentuale del 20% da raggiungere entro il 2020. In questo ambito, il regolamento europeo ErP (Energy Related Products) introduce una classificazione energetica anche per i generatori di acqua calda ai fini del riscaldamento d’ambiente e dell’acqua calda sanitaria. Tale classificazione si traduce in una etichetta energetica che deve obbligatoriamente accompagnare tutti i prodotti interessati dal Regolamento, introdotti nel mercato dal 26 settembre 2015. L’etichettatura costituisce una facile guida per il consumatore, che può scegliere - tramite indicazioni standardizzate ed oggettive - il prodotto più efficiente. In questo modo la scelta sarà la più parca nei consumi a vantaggio dell’utente, ma anche la più virtuosa per gli equilibri energetici e di conseguenza, per l’ambiente. I parametri più significativi indicati nell’etichetta sono l’indice di efficienza stagionale in riscaldamento e di efficienza nell’eventuale produzione di acqua calda sanitaria, secondo una scala che nel caso del prodotto singolo caldaia si attesta dalla A alla G*. Inoltre per le caldaie combinate viene indicato un profilo di carico corrispondente alla portata sanitaria dell’apparecchio misurata in una serie di prelievi-tipo, garantendo almeno l’efficienza in sanitario dichiarata. Tale indice viene identificato con una lettera/”taglia” (S, M …XXL).Integrazione circuito solareDIVACONDENS D PLUS vanta una elettronica che semplifica l’integrazione con sistemi solari termici, sia a circolazione naturale sia forzata. Il microprocessore controlla la temperatura dell’acqua proveniente dal circuito solare attraverso il sensore di acqua calda sanitaria e accende il bruciatore solo in caso di necessità. Per il raggiungimento della temperatura desiderata, SUN EASY permette un notevole risparmio anche durante le stagioni più fredde, sfruttando e integrando anche il più piccolo contributo solare, altrimenti perso. In caso di irraggiamento insufficiente e quindi un preriscaldo modesto dell’acqua sanitaria, la caldaia contribuirà con il calore necessario per raggiungere la temperatura di setpoint richiesta. Qualora il sole e il sistema solare assolvano al loro “dovere” non sarà necessaria nessuna integrazione da parte della caldaia, l’acqua calda verrà convogliata al rubinetto, senza necessità di dispositivi addizionali, con la miscelazione delle valvole termostatiche.Sicurezza e comfortANTIGELO Nell’eventualità che la temperatura in caldaia scenda a 5°C, il bruciatore si accende automaticamente e il circolatore si attiva al fine di preservare l’apparecchio dai danni causati dal gelo. Tale funzione è attiva con la caldaia alimentata dal circuito gas e sotto tensione elettrica. POST-CIRCOLAZIONE Questa funzione permette di recuperare tutto il calore fornito per inerzia termica dello scambiatore e trasferirlo al sistema di riscaldamento, e di conseguenza ai locali da riscaldare. Si tratta di una funzione timer (di durata personalizzabile) ed è attiva dopo che il bruciatore si spegne in modalità di riscaldamento. FUNZIONAMENTO IN TEMPERATURA SCORREVOLE Con l’installazione del kit “Sonda esterna” è possibile far funzionare la caldaia in temperatura scorrevole. Ciò significa che senza agire sui tasti di regolazione della temperatura di impianto, la caldaia si autoregolerà in funzione delle variazioni delle temperature esterne. Tutto questo si traduce in risparmio energetico pur garantendo il massimo comfort all’utente. EASY CONTROL La scheda elettronica di DIVACONDENS D PLUS adotta il protocollo Opentherm. Esso permette l’integrazione di altre centraline periferiche come, ad esempio, il cronocomando remoto ROMEO. Lo standard Opentherm infatti è stato appositamente studiato per condividere le logiche e gli algoritmi di funzionamento della caldaia con altre centraline aggiuntive. In quanto protocollo digitale, consente una totale integrazione tra caldaia e satellite, con il pieno controllo delle funzioni dalla caldaia e similmente dal suo satellite. Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€440,00
-
Ferroli AREA OCCASIONI Caldaia a Condensazione Ferroli DIVACONDENS D PLUS F24 Metano LOW NOx Completa di kit scarico fumi - NEW ErP
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA BOZZATURE SULLA PARTE FRONTALE E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) ATTENZIONE ! La caldaia verrà fornita a metano, per il funzionamento a GPL bisogna rivolgersi al Centro Assistenza Autorizzato di zona. Caratteristiche Tecniche Modello : Divacondens D Plus Potenza Termica nominale : 24 kW Alimentazione : Metano Specifiche Efficienza Energetica secondo direttiva Europea ErP Classe Efficienza Energetica Riscaldamento : B Efficienza Energetica Stagionale per il Riscaldamento d'ambiente : 89% Performance Portata Termica Riscaldamento : 7,5 ~ 25,0 kW Potenza Termica Riscaldamento : 7,2 ~ 24,2 kW Rendimento Termico Ultile 30% Pmin : 100,1 % Produzione Acqua Calda Sanitaria 25°C ?t 30°C : 13,9 ~ 11,6 l/min Emissioni NOx 6 Dimensioni e Peso Dimesioni (LxHxP) : 400x700x330 mm Peso : 35 Kg Caldaia Ferroli Divacondens D Plus La Soluzione Più Semplice Per Una Caldaia a Condensazione DIVACONDENS D PLUS è il generatore di calore a condensazione per i sistemi di riscaldamento tradizionali. La collaudata tecnologia Ferroli nel campo delle caldaie murali tradizionali è stata arricchita incrementando le prestazioni del prodotto nel modo più semplice, con l’utilizzo di un robusto recuperatore che preriscalda il circuito primario utilizzando il calore residuo dei fumi di scarico e di un nuovo bruciatore raffreddato a basse emissioni di NOx. La Gamma Divacondens D Plus è proposta in un unico modello per riscaldamento e produzione istantanea di acqua calda sanitaria Caratteristiche> Caldaia a condensazione per il riscaldamento di impianti ad alta temperatura e produzione di acqua calda sanitaria. Non risulta idonea all’abbinamento con mandata diretta ad impianti con pannelli radianti a bassa temperatura > Scambiatore primario a geometria compatta > Produzione istantanea di acqua calda sanitaria con scambiatore a piastre dedicato > Post-recuperatore del calore latente di condensazione, in funzione di pre-riscaldo del circuito primario > Caldaia a camera stagna e tiraggio forzato, con bruciatore atmosferico raffreddato ad acqua a basse emissioni di NOx > By-pass idraulico automatico di serie > Minime emissioni inquinanti (classe 6 secondo EN 15502-1) > Circolatore alta efficienza a basso consumo (ErP - Classe A) con sistema antibloccaggio tramite attivazione per alcuni secondi ogni 24 ore di inattività > Abbinabile al cronocomando remoto modulante > Pannello comandi semplice e completo, interfaccia utente a display, con tasti di impostazione > Robusto post-condensatore alimentato dal circuito chiuso del primario. Lo scambio termico con i fumi avviene all’interno di passaggi d’acqua di grande diametro. > Generatore dal funzionamento semplice e razionale > Funzione ECO in sanitario per un maggior risparmio nel periodo di scarso utilizzo di acqua calda > Predisposizione impianti solari: predisposta per la produzione di acqua calda sanitaria combinata con impianti a pannelli solari > Luogo di installazione: anche per esterno in luogo parzialmente protetto fino a -5°C di serie > Funzionamento certificato anche ad aria propanata (50% aria - 50% G31) mediante apposita trasformazione da richiedere al Centro Assistenza Autorizzato > Funzionamento anche a GPL con l’utilizzo di un apposito kit di conversione da richiedere al Centro Assistenza AutorizzatoControllo in caldaia La centralina di controllo di DIVACONDENS D PLUS consiste in un’interfaccia facile da usare con display retroilluminato. Tramite i pulsanti è possibile regolare facilmente la temperatura di mandata riscaldamento, il setpoint dell’acqua calda sanitaria, accendere / spegnere il generatore o attivare la funzione confort, monitorando lo stato della caldaia. Il pannello di controllo è completato da un manometro tradizionale che può controllare in qualsiasi momento la pressione dell’impianto.Le performanceClassificazione energetica Profilo di carico sanitario (massima portata alla corrispondente efficienza dichiarata in sanitario) Efficienza nella produzione di acqua calda sanitaria PER CALDAIE COMBINATE Il pacchetto “clima-energia 20/20/20” prevede ambiziosi obiettivi di riduzione dell’emissione di gas serra, dei consumi energetici nonché l’incremento dell’uso di energie rinnovabili, corrispondenti ad una percentuale del 20% da raggiungere entro il 2020. In questo ambito, il regolamento europeo ErP (Energy Related Products) introduce una classificazione energetica anche per i generatori di acqua calda ai fini del riscaldamento d’ambiente e dell’acqua calda sanitaria. Tale classificazione si traduce in una etichetta energetica che deve obbligatoriamente accompagnare tutti i prodotti interessati dal Regolamento, introdotti nel mercato dal 26 settembre 2015. L’etichettatura costituisce una facile guida per il consumatore, che può scegliere - tramite indicazioni standardizzate ed oggettive - il prodotto più efficiente. In questo modo la scelta sarà la più parca nei consumi a vantaggio dell’utente, ma anche la più virtuosa per gli equilibri energetici e di conseguenza, per l’ambiente. I parametri più significativi indicati nell’etichetta sono l’indice di efficienza stagionale in riscaldamento e di efficienza nell’eventuale produzione di acqua calda sanitaria, secondo una scala che nel caso del prodotto singolo caldaia si attesta dalla A alla G*. Inoltre per le caldaie combinate viene indicato un profilo di carico corrispondente alla portata sanitaria dell’apparecchio misurata in una serie di prelievi-tipo, garantendo almeno l’efficienza in sanitario dichiarata. Tale indice viene identificato con una lettera/”taglia” (S, M …XXL).Integrazione circuito solareDIVACONDENS D PLUS vanta una elettronica che semplifica l’integrazione con sistemi solari termici, sia a circolazione naturale sia forzata. Il microprocessore controlla la temperatura dell’acqua proveniente dal circuito solare attraverso il sensore di acqua calda sanitaria e accende il bruciatore solo in caso di necessità. Per il raggiungimento della temperatura desiderata, SUN EASY permette un notevole risparmio anche durante le stagioni più fredde, sfruttando e integrando anche il più piccolo contributo solare, altrimenti perso. In caso di irraggiamento insufficiente e quindi un preriscaldo modesto dell’acqua sanitaria, la caldaia contribuirà con il calore necessario per raggiungere la temperatura di setpoint richiesta. Qualora il sole e il sistema solare assolvano al loro “dovere” non sarà necessaria nessuna integrazione da parte della caldaia, l’acqua calda verrà convogliata al rubinetto, senza necessità di dispositivi addizionali, con la miscelazione delle valvole termostatiche.Sicurezza e comfortANTIGELO Nell’eventualità che la temperatura in caldaia scenda a 5°C, il bruciatore si accende automaticamente e il circolatore si attiva al fine di preservare l’apparecchio dai danni causati dal gelo. Tale funzione è attiva con la caldaia alimentata dal circuito gas e sotto tensione elettrica. POST-CIRCOLAZIONE Questa funzione permette di recuperare tutto il calore fornito per inerzia termica dello scambiatore e trasferirlo al sistema di riscaldamento, e di conseguenza ai locali da riscaldare. Si tratta di una funzione timer (di durata personalizzabile) ed è attiva dopo che il bruciatore si spegne in modalità di riscaldamento. FUNZIONAMENTO IN TEMPERATURA SCORREVOLE Con l’installazione del kit “Sonda esterna” è possibile far funzionare la caldaia in temperatura scorrevole. Ciò significa che senza agire sui tasti di regolazione della temperatura di impianto, la caldaia si autoregolerà in funzione delle variazioni delle temperature esterne. Tutto questo si traduce in risparmio energetico pur garantendo il massimo comfort all’utente. EASY CONTROL La scheda elettronica di DIVACONDENS D PLUS adotta il protocollo Opentherm. Esso permette l’integrazione di altre centraline periferiche come, ad esempio, il cronocomando remoto ROMEO. Lo standard Opentherm infatti è stato appositamente studiato per condividere le logiche e gli algoritmi di funzionamento della caldaia con altre centraline aggiuntive. In quanto protocollo digitale, consente una totale integrazione tra caldaia e satellite, con il pieno controllo delle funzioni dalla caldaia e similmente dal suo satellite. Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€440,00
-
Junkers Bosch AREA OCCASIONI Caldaia Junkers Bosch CONDENS 2200 W GC2200W 24/23 C 24 kW a condensazione completa di kit scarico fumi Metano o GPL classe A cod. 7736901846 - NEW ERP
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA UN'AMMACCATURA LUNGO IL BORDO DEL COPERCHIO DELLA CALDAIA, PARTE INFERIORE GRAFFIATA E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) ATTENZIONE LA CALDAIA VIENE FORNITA A METANO. PER LA TRASFORMAZIONE A GPL, RIVOLGERSI PREVENTIVAMENTE AL SERVIZIO ASSISTENZA AUTORIZZATO Caldaia Junkers Bosch CONDENS 2200 W GC2200W 24/23 C 24 kW a condensazione completa di kit scarico fumi Metano o GPL classe A - NEW ERP Caratteristiche Tecniche Profilo di carico dichiarato XL Classe di efficienza energetica A Classe di efficienza energetica di riscaldamento dell'acqua A Potenza termica nominale Prated kW 24 Consumo annuo di energia QHE GJ 49 Efficienza energetica stagionale del riscaldamento d'ambiente ?S % 94 Efficienza energetica di riscaldamento dell'acqua ?wh % 85 Dimensioni Altezza (cm) :71 Larghezza (cm) :40 Profondità (cm) :30 Peso (kg) :35,00 Condens 2200 W Condens 2200 W è la nuova caldaia murale a condensazione compatta e versatile per riscaldamento e produzione di acqua calda sanitaria Massima affidabilità La nuova caldaia Condens 2200 W si distingue non solo per le dimensioni ridotte, ma anche per l'elevata robustezza, garantita dallo scambiatore primario in lega di alluminio Al-Si WB6 Grande efficienza in poco spazio La compattezza e versatilità della nuova caldaia Condens 2200 W la rendono la soluzione ideale in caso di sostituzione, perché in grado di adattarsi a qualunque ambiente domestico Elevate prestazioni in classe A+ La nuova Condens 2200 W garantisce un rendimento stagionale pari al 94%, il massimo ottenibile da una caldaia a condensazione. Se abbinata ad un termoregolatore modulante con funzione climatica è inoltre in grado di raggiungere la Classe A+ Dimensioni ridotte e nuovo design arrotondato Elevato risparmio energetico grazie al rendimento stagionale pari al 94% Ideale per gli interventi di sostituzione Range di modulazione fino a 1:5 Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€730,00
-
Ferroli Ferroli Bluehelix Tech Rrt 24c Low Nox LPG Condensing Boiler Complete With Smoke Exhaust Kit
ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance IN THE ABSENCE OF THIS ITEM, THE BLUEHELIX ALPHA 24 MODEL WILL BE SHIPPED Technical features Model : Bluehelix Tech RRT 24C Energy rating Heating energy efficiency class: A DHW energy efficiency class: A ACS profile : XL Performance Heating thermal capacity: 5.0 ~ 20.4 kW Heating thermal power 80°C / 60°C : 4,9 ~ 20,0 kW Heating thermal power 50°C / 30°C : 4,9 ~ 20,0 kW DHW thermal capacity: 5 ~ 25.0 kW Sanitary thermal power: 4.9 ~ 24.5 kW Minimum efficiency 80°C / 60°C : 97.8% Maximum efficiency 80°C / 60°C : 98.0% Minimum efficiency 50°C / 30°C : 107.5% Maximum efficiency 50°C / 30°C : 106.1% G20 gas pressure : 20 bar G31 gas pressure : 37 bar NOx emission class : 6 Heating operating pressure: 0.8 ~ 3 bar Maximum heating temperature: 90°C Heating expansion vessel capacity: 8 litres DHW operating pressure: 0.3 ~ 9 bar Domestic water flow rate ∆t 25°C : 14 l/min Domestic water flow rate ∆t 30°C : 11.7 l/min Degree of protection : IP X5D Power supply (V,Hz, Ø) : 220~240/50/1 Dimensions and weight Dimensions (HxWxD): 700x420x250 mm Empty weight: 28.0 kg 5 years without worries Ferroli BLUEHELIX TECH RRT boiler Ecological wall-hung condensing boilers with Ferroli Thermobalance™ combustion cell The evolution continues.. The range of generators is equipped with the tested AISI 304 stainless steel exchanger. Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX TECH RRT is at the top of its category. BLUEHELIX TECH RRT achieves one of the highest energy efficiency of space heating in the boiler category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ Extended warranty with the "5 YEARS WORRY-FREE" formula The quality of Bluehelix TECH RRT is unquestionable, and Ferroli is ready to put it to the test by offering its customers extended warranty coverage which also ensures periodic maintenance and legal checks TOP efficiency even on old systems The exchanger of the THERMOBALANCE™ thermal group by Bluehelix TECH RRT compared with the more classic and widespread steel exchanger used in the past also by the Ferroli Group exclusively on a small series of boilers produced for the English market, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in Bluehelix models This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments, for example due to installation on old systems, the exchanger tends to blockage much faster in the part in contact with the flame due to the reduced passage area of the fluid, in which a real barrier of deposits is formed which hinder the heat exchange and reduce the efficiency below the nominal values . Product plus > Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt > It reaches one of the highest seasonal space heating efficiency in its category: ηs 94% and in combination with the modulating remote control and the optional external probe it reaches the top efficiency class > Class 6 NOx : already in line with the provisions of the ErP regulation, NOx emissions < 56mg/kWh. > MC 2 : M ulti C ombustion C ontrol, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network, such as fluctuations or reduced pressures. > MGR : Methane LPG R eady, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits > Exclusive exchanger-burner system with self-cooled door without insulators: it simplifies maintenance and reduces its cost thanks to a smaller number of perishable parts. > Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger > Hydraulic connections covered by the boiler shell > Large backlit multifunction graphic display for easy and correct parameter setting > Standard by-pass > Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes > FPS : Fumes Protection System . The flue clapet valve fitted as standard on the boiler allows easy connection to pressurized collective flue systems > Designed to simplify and facilitate normal maintenance and cleaning operations > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > ECO function in DHW for greater savings in the period of low use of hot water > 3-star certified comfort in sanitary manufacturing according to EN 13203 > Sliding temperature operation via optional external probe > Low consumption modulating heating circulator > Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection, only for methane operation > Place of installation : also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Innovative Ferroli THERMOBALANCE TM heating unit in its 5 elements Ferroli has oriented the design of the combustion cell and of the Bluehelix TECH RRT exchanger in order to maximize the functional advantages and the constructive sturdiness, as well as the simplicity of maintenance: the single-circuit design means that any air bubbles in the system do not remain trapped in the exchanger, and facilitates cleaning with chemical washing as much as possible, unlike spiral exchangers with double parallel circuit in which if only one of the circuits gets blocked, chemical washing is much more laborious. High flow single circuit stainless steel heat exchanger, resistant to clogging and easy to clean Self-cooled burner door without insulating panel Exclusive special stainless steel hemispherical burner with long-life gasket Intelligent “ Gas-adaptive ” system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary Offset fan, to facilitate maintenance of the thermal group without disassembly. Integrated smoke anti-reflux clapper for connection to CCS The engine Combustion cell The tube that makes up the BLUEHELIX TECH RRT exchanger is made of AISI 304 stainless steel , a material that allows for the creation of an extremely smooth surface , therefore less susceptible to encrusting agents and deposits. TOP quietness The new design for comfort The particularly careful design of BLUEHELIX TECH RRT has made it possible to achieve significant values in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections. Remote control Environment and climate BLUEHELIX TECH RRT can be combined with a wide range of remote timer controls that allow remote control and control of the appliance. The ROMEO series is made up of several models, with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With the connection to the external probe, BLUEHELIX TECH RRT is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, guaranteeing the user greater comfort as the external climatic conditions vary. This function is internal to the electronic board of the boiler and therefore does not require the presence of the remote control , making the configuration operations easier in case of replacement. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Boiler control Control panel and functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs . The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems MC 2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC 2 : Multi Combustion Control , the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance" tm thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - Internal accessibility is favored by the 3-piece shell with removable side panels. - The electrical box of the electronic card can be easily extracted from the chassis and hooked laterally, leaving free access to the internal parts - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit - The burner door is totally self-cooled by air and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. - The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections . - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Simplified replacement Smoke outlet ø 50 mm The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters. FPS .: Fumes Protection System . The flue clapet valve allows easy connection to pressurized collective flue systems . For installers, the solution of the collective pressure pipe is cheaper Comfort & Safety The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life of the appliance Stop And Go function With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these " false starts " can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TECH RRT provides an electronic parameter through which it is possible to delay the ignition of the burner by activating it only in the face of actual withdrawals of domestic hot water Sun Easy function BLUEHELIX TECH RRT has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user Sanitary Eco-Comfort function In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable . Reaching maximum comfort certified 3 stars. The efficiency and load profiles according to the ErP directive are at the top of the category External installation and antifreeze function To make the most of the available space, the new BLUEHELIX TECH RRT 24C boiler can be installed recessed into the wall using the special kit. For more critical installations, in completely uncovered places not protected from the elements, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost . This function is active with the boiler powered by the gas circuit and under electrical voltage Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€717,00
You have seen 60 out of 860 products