Caratteristiche Tecniche Performance in riscaldamento:Portata termica (min/nom.): 2.7/25 kW;Potenza utlile: 24.4 kW;Temperatura (min./max): 40/85 °C;Pressione (min./max): 0.3/3 bar;Performance in sanitario:Portata termica nom. sanitario: 25 kW;Potenza utile (60/80 °C): 24.4 kW;Temperatura (min./max): °C 35/55;Pressione (min./max): 0.3/10 bar;Portata massima Δt=25°C 13.9 l/min;Portata massima Δt=30°C 10.0 l/min;Potenza elettrica alla portata termica nom: 65 W;Potenza elettrica a riposo: 3 W;Capacità totale del vaso d'espansione: 8 l;Grado di protezione elettrica IPX5D;Composto da:Pannello comandi a scomparsa con manopole ergonomiche e display retro illuminato;Scambiatore sanitario a piastre in acciaio INOX;Pompa ad alta efficienza a basso consumo energetico;Scheda elettronica per:Regolazione della frequenza in accensione;Selezione modalità circolatore;Smaltimento inerzia termica circuito primario regolabile;Flussostato sanitario magnetico;Pressostato riscaldamento assoluto;Immunità dai radiodisturbi;Flussostato magnetico sanitario;Pressostato riscaldamento assoluto;Possibilità di integrare la caldaia con sistemi solari OPTIONAL THERMOMEC.Funzioni:Funzione spazzacamino;By pass automatico integrato;Antigelo;Antibloccaggio circolatore;Caratteristiche GeneraliLa caldaia R-MHP S a condensazione è studiata per gli impianti comuni,inoltre abbinando MULTIzone la si rende facilmente adattabile ai nuovi impianti a pavimento, MULTIzone è l'apparato per distribuzione dell’acqua calda di riscaldamento in più stanze. R-MHP è la caldaia tradizionale, ma con rendimenti nettamente superiori alle comuni caldaie a parità di temperatura di funzionamento. La caldaia R-MHP S è composta da un RECUPERATORE DI CALORE incorporato in alluminio, che presenta una serpentina con delle alette che permettono un elevata superficie di scambio, ed ha un dispositivo di controllo che assicura lo scarico corretto della condensa. Questo sistema permette l'accumulo di calore emanato dai fumi di scarico prima di fuoriuscire, riscaldando cosi l'acqua diretta nello scambiatore primario.Comandi:Tasto estate/inverno/off;Manometro;Temperatura riscaldamento e sanitario visualizzati sul display;Diagnostica guasti e stato di blocco visualizzati sul display;Pulsante reset;Regolatore di temperatura sia per riscaldamento che per sanitario;Predisposizione per comando remoto;Connessioni elettriche facilmente accessibili;Predisposizione per sonda esterna.Dimensioni(AxLxP):803x400x350 mm; Peso: 42.5 Kg

Read more less

Technical features Heating performance: Thermal input (min/nom.): 2.5/25 kW; Power (min/max): 10.5/24.3 kW; Temperature (min./max): 38/85 °C; Pressure (min./max): 0.3/3 bar; Healthcare performance: Nominal heat input sanitary: 25 kW; Useful power (60/80 °C): 24.4 kW; Temperature (min./max): °C 35/60; Pressure (min./max): 0.3/10 bar; Maximum flow rate Δt=25°C 13.9 l/min; Useful head of the generator (1000 l/h): 250 mbar; Electrical power at rest: 3 W; Load efficiency (min/max): 95.1/97.2 %; Total capacity of the expansion tank: 6 l; Electrical protection degree IPX4D; Composed of: Digital control panel and backlit display; Copper lamellar primary heat exchanger with large exchange surface and double circulation; Sanitary plate heat exchanger in stainless steel; Aluminum heat recovery unit for exploiting the heat of the fumes for water heating; Electronic board for: Ignition frequency adjustment; Circulator mode selection; Adjustable primary circuit thermal inertia disposal; Magnetic sanitary flow switch; Absolute heating pressure switch; Immunity to radio interference; Sanitary magnetic flow switch; Absolute heating pressure switch; Possibility of integrating the boiler with OPTIONAL THERMOMEC solar systems. Functions: Chimney sweep function; Integrated automatic by-pass; antifreeze; Circulator anti-blocking; General characteristics The RD-MHP ST condensing boiler is designed for common systems, moreover combining MULTIzone makes it easily adaptable to new underfloor systems, MULTIzone is the device for distributing hot heating water in several rooms. RD-MHP is the traditional boiler, but with yields clearly higher than common boilers at the same operating temperature. The R-MHP S boiler is made up of a built-in aluminum HEAT RECOVERY UNIT, which has a coil with fins which allow for a large exchange surface, and has a control device which ensures the correct discharge of the condensate. This system allows the accumulation of heat emanating from the exhaust fumes before leaving, thus heating the direct water in the primary exchanger. Commands: Summer/winter/off key; Gauge; CH and DHW temperature shown on the display; Fault diagnostics and lockout status shown on the display; reset button; Temperature regulator for both heating and DHW; Arrangement for remote control; Easily accessible electrical connections; Arrangement for external probe. Dimensions (HxWxD):803x400x350mm; Weight: 47.5Kg Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features Energy class in heating: A; Energy class in sanitary: A; Sanitary load profile: XXL; Electrical power at nominal heat input: 57 W; Electrical power at rest: 5 W; Heating performance: Nominal heat input: 30 kW; Power (min.max): 29.46/32.13 kW; Minimum useful power (60-80°): 8.3 kW; Temperature (min./max): 25/85 °C; Minimum pressure (min/max): 0.3/3 bar; Healthcare performance: Nominal heat input: 34 kW; Power (min.max): 29.46/36.4 kW; Minimum useful power (60-80°): 9.17 kW; Temperature (min./max): 35/55 °C; Minimum pressure (min/max): 0.3/10 bar; Maximum flow rate (∆T=25°C): 21.6 l/min; Maximum flow rate (∆T=35°C): 15.6 l/min; Efficiency at 30% of the load (60/80°C): 102.1%; Total expansion tank capacity: 7 l; Useful head of the generator at 1000/h: 0.27 bar; Electrical protection degree: IP X5D; General characteristics The new Thermomec Tiffany pre-mixed condensing boiler features innovative aesthetics and a new intuitive and easy-to-use interface, it is equipped with new functions that make it an integral part of a system and which facilitate its installation and maintenance. All this makes a product that allows you to have great performance, high yields, energy saving and respect for the environment thanks to the reduced polluting emissions such as NOx and CO. The C-MHPX boiler designed for heating but is made up of a stainless steel exchanger combined with electronic management and the low inertia of the primary exchanger characterize high performance also in the production of DHW (domestic hot water). One of the multiple functions is the MAXIMUM ADJUSTABLE POWER, i.e. it is the function that allows you to limit the maximum power useful for heating without limiting the performance of the useful power in DHW. Installed in low temperature systems, they allow savings of up to 30%. Finally, for the production of domestic hot water (DHW) it is possible to combine, using kits (optional), solar systems and therefore increase the efficiency of the product. Dimensions (HxWxD): 700x400x290 mm; Weight: 34.5Kg;

Read more less