icon Chaffoteaux Mira Advance 30 Kw Methane Gas Boiler Complete With Fume Exhaust Kit - New Erp | CaldaieMurali

Chaffoteaux Mira Advance 30 Kw Methane Gas Boiler Complete With Fume Exhaust Kit - New Erp

Description

Technical features
Product code: 3310616
Energy label specifications according to the European ErP directive
Class A heating energy efficiency
Sanitary energy efficiency Class A
Withdrawal profile: XL

Characteristics of heating/DHW operation:

Heating nominal heat input max/min (Hi): 28/3.0 kW
DHW nominal heat input max/min (Hi): 30.0/3.5 kW
Performance Stars ****
Expansion tank capacity 8 l
Instantaneous quantity of hot water (∆T=25 K): l/min 17.2
Domestic water pressure max/min bar 7.0/0.2

Electrical characteristics

Supply voltage/frequency: V/Hz 230/50
IP X5D degree of protection

Dimensions

Weight: 32.3kg

General characteristics

AIM ADVANCE

Mira Advance is the condensing boiler born for the future with a powerful soul, Spin Tech, the new exchanger with a completely renewed design that offers high performance, to improve domestic comfort and adapt to every need.

Maximum Performance:

New single coil primary heat exchanger in stainless steel.
Passage sections increased by 142% compared to the previous version.
1 m more head.
Seasonal yield at 94%.
Class A+ reachable with thermoregulation.

Maximum Comfort

Modulation ratio 1:10.
Electronic combustion control E-Burning System.
SRA function.
Gas transformation from the technical menu without the need for a kit.
Ready for Chaffolink connectivity.

Ease of Installation

Installation in partially protected places.
Smoke outlets 80, 60, 50 mm.
Intuitive electrical connections.

Energy saving and respect for the environment

Up to 25% energy savings in combination with Expert Control and the SRA function.
Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor.

All ready for Energy Labeling

What is it about?

From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply.

These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction

For placing on the European market, the eco-design directive ( ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to:

generators with a capacity of less than 400 kW
water heaters with a capacity of less than 400 kW,
kettles with a capacity of less than 2000 litres

As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product you wish to purchase.

The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015.

Is it about me too?

YES, it affects everyone: professionals and end users

The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available.

The user will be able to easily compare the performance of the products.

From 26 September 2015 , the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.

Supplier responsibility

The company that supplies the product on the market is required to equip its devices or systems with the following documentation:

product energy label;
technical product sheet;
system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;
technical data sheet of the system with the parts relating to the product or system already completed.

Dealer Responsibility

First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that:

all appliances and/or systems have their respective labels and make sure that they are clearly visible;
all devices and/or systems are always accompanied by the mandatory technical data sheets;
any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class.

The new ErP regulations

ENERGY LABELLING:

Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances.

ECODESIGN (ErP) :

The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.

PRODUCT LABEL

Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible.

SYSTEM LABEL

In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way.

Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Chaffoteaux Mira Advance 30 Kw Methane Gas Boiler Complete With Fume Exhaust Kit - New Erp

Product form

Technical features Product code: 3310616 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary... Read more

€1.101,00 Incl. VAT

    Description

    Technical features
    Product code: 3310616
    Energy label specifications according to the European ErP directive
    Class A heating energy efficiency
    Sanitary energy efficiency Class A
    Withdrawal profile: XL

    Characteristics of heating/DHW operation:

    Heating nominal heat input max/min (Hi): 28/3.0 kW
    DHW nominal heat input max/min (Hi): 30.0/3.5 kW
    Performance Stars ****
    Expansion tank capacity 8 l
    Instantaneous quantity of hot water (∆T=25 K): l/min 17.2
    Domestic water pressure max/min bar 7.0/0.2

    Electrical characteristics

    Supply voltage/frequency: V/Hz 230/50
    IP X5D degree of protection

    Dimensions

    Weight: 32.3kg

    General characteristics

    AIM ADVANCE

    Mira Advance is the condensing boiler born for the future with a powerful soul, Spin Tech, the new exchanger with a completely renewed design that offers high performance, to improve domestic comfort and adapt to every need.

    Maximum Performance:

    New single coil primary heat exchanger in stainless steel.
    Passage sections increased by 142% compared to the previous version.
    1 m more head.
    Seasonal yield at 94%.
    Class A+ reachable with thermoregulation.

    Maximum Comfort

    Modulation ratio 1:10.
    Electronic combustion control E-Burning System.
    SRA function.
    Gas transformation from the technical menu without the need for a kit.
    Ready for Chaffolink connectivity.

    Ease of Installation

    Installation in partially protected places.
    Smoke outlets 80, 60, 50 mm.
    Intuitive electrical connections.

    Energy saving and respect for the environment

    Up to 25% energy savings in combination with Expert Control and the SRA function.
    Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor.

    All ready for Energy Labeling

    What is it about?

    From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply.

    These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction

    For placing on the European market, the eco-design directive ( ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to:

    generators with a capacity of less than 400 kW
    water heaters with a capacity of less than 400 kW,
    kettles with a capacity of less than 2000 litres

    As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product you wish to purchase.

    The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015.

    Is it about me too?

    YES, it affects everyone: professionals and end users

    The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available.

    The user will be able to easily compare the performance of the products.

    From 26 September 2015 , the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.

    Supplier responsibility

    The company that supplies the product on the market is required to equip its devices or systems with the following documentation:

    product energy label;
    technical product sheet;
    system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;
    technical data sheet of the system with the parts relating to the product or system already completed.

    Dealer Responsibility

    First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that:

    all appliances and/or systems have their respective labels and make sure that they are clearly visible;
    all devices and/or systems are always accompanied by the mandatory technical data sheets;
    any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class.

    The new ErP regulations

    ENERGY LABELLING:

    Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances.

    ECODESIGN (ErP) :

    The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.

    PRODUCT LABEL

    Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible.

    SYSTEM LABEL

    In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way.

    Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
    Data sheetData sheet
    • peso: 35.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane
    • marca: CHAFFOTEAUX
    • metri quadri : 200
    • modello: Mira Advance 30 Metano
    • potenza in kw: 30
    • potenza nominale: 30
    • superficie riscaldabile mq: 200
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account