The conversion to LPG can be requested from an authorised Ferroli service centre, free of charge. Energy class A XL load profile Nominal heat output Max / Min kW 52 / 9,5 Thermal power Max / Min kW 45,2 / 8,6 NOx class (according to EN 15502) 6 Maximum operating pressure Max / Min bar 10 / 0,2 Sanitary production Δt 25°C Δt 30°C l/min 26 / 21.6 Power supply V/Hz 230 / 50 Degree of electrical protection IP X5 Dimensions HxWxD mm 572x394x180 External Low NOx gas wall-mounted water heater for outdoor installations without flue pipes   EXTERNO is an A3 type instantaneous gas water heater with frontal flue gas discharge and suitable for outdoor installation without flue gas evacuation ducts. The water heater is equipped with a combustion unit which, in combination with a LOW NOx micro-flame burner, guarantees polluting levels below the parameters imposed by the severe limitations of the European ErP directive. EXTERNO has been designed exclusively for outdoor installations such as on balconies, attics or dedicated shafts. The casing is made up of two IPX5D insulated printed shells and the water circuit inside the appliance is protected with electrical resistances, fitted as standard, and managed by the electronic board. These measures allow EXTERNO to function correctly up to extreme conditions of -20°C. All appliances are supplied as standard with a remote control (and 10-metre long connection cable) featuring a large interface display and simple control buttons, to make adjustments easy and intuitive. SOLAR FUNCTION All models in the EXTERNO range can be easily installed in combination with a solar thermal system for the production of domestic hot water. The hydraulic circuit with its components have been designed to operate even at high temperatures of the water exiting the panels. ECO FUNCTION Using the remote control, you can activate the ECO function. When operating in ECO mode, the EXTERNO water heater will automatically set the hot water outlet temperature to 42°C and a reduced power of approximately 75% of the nominal power. CHILD PROTECTION If the hot water temperature is set to a very high value, each time the water heater is turned OFF, the delivery temperature will automatically return to 48°C so that the next withdrawal takes place in complete safety. The EXTERNO water heater series does not have on-board controls. The control, setting and temperature adjustment functions of the ACS are delegated to a remote control supplied as standard, complete with connection cable. The interface display and control keys have been designed to make the use of the control as simple and intuitive as possible. In the event of an anomaly and/or malfunction of the water heater, the display indication is accompanied by an audible signal. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 10 -18 Characteristics of heating/DHW operation: Code: REU-VRM2024WD-NG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 500 Standard antifreeze down to -20°C Installation: Outdoor - Apartment Dimensions: mm 503x356x181 - 15 Kg Natural gas heat input Min/Max (kW) 3.46/39 Water flow Δt 25°C Min/Max (l/min) 20l/min Max operating temperature (°C) 75 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 1.2 / 10 Electricity consumption normal / stand-by / antifreeze (W) 48 / 2 / 74 IPX5D protection Class NOx5 METHANE version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control External installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Heat pump water heater Ferroli EGEA LT 90 A+ Wi-Fi integrated Technical features Product code: 2COBA00F Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Characteristics of heating/DHW operation: Nominal accumulation capacity l 89 Maximum capacity of hot water at 40°C l 98 Storage dispersion W 40 Average electrical power absorbed Wel 270 Dimensions (Ø x H) mm 510 x 1380 Nominal air flow m3 /h 190 Required room volume m3 15 Power supply parameters V-Hz 230V - 50H Protection class IP24 Sound power indoors Lw(A) dB(A) 52 Anti-legionella system AutomaticAnti-corrosion system n. 1 Mg anode Operating modes Auto, Eco, Boost, Elec. Heater, Fan EGEA EGEA is a brand new range of storage heat pump water heaters for the production of domestic hot water, suitable for small residential applications. It is a smart solution for heating sanitary water, which uses electricity, air and possibly solar thermal and photovoltaic energy, leaving out the use of traditional fuels. Efficiency, ecology, flexibility and the new aesthetics are the characteristics that distinguish EGEA and differentiate it from a traditional electric water heater . * The 90 and 120 LT models use R-290 gas, a valid “green” alternative to the most common high GWP (Global Warming Potential) refrigerants in the sector. It is a naturally occurring hydrocarbon (HC) with a GWP of 3 and an ODP (Ozone Depletion Potential) of 0 FEATURES at a glance... EGEA mod. 90 / 120 / 200 / 260 EGEA is an air-water heat pump for the production of domestic hot water, storage in an enamelled steel tank, externally wound condenser for maximum safety and hygiene. > Maximum temperature equal to 62°C obtained from renewable energy with heat pump only or by electric resistance (up to 75°C). > Digital interface with programmable TOUCH keys. > Integration via Solar Thermal (LT-S model) or via Electric Resistance (up to 75°C) on all models. > Integration with the Solar Photovoltaic system. INCENTIVES... when saving is a must. EGEA exploits all the features and technology of air-to-water heat pumps for the production of domestic hot water. Only 25% of the The system's energy requirement comes from electricity. FERROLI is at your disposal for technical and documentary support to take advantage of the incentives provided by the Ministerial Decree 02/16/2016) and subsequent extensions and amendments. ELECTRONICS... easier than that! The EGEA user interface features a very simple and intuitive display. > White backlit LEDs for temperature and function management. > Red backlit LEDs for alarm warnings. > The 4 side TOUCH buttons allow EGEA to be switched on/off ( ); navigation in the MENU ( ) and the increase ( + ) or decrease ( - ) of the setting values. INTEGRATION... EGEA gets along with everyone All versions of EGEA provide for the possibility of using renewable energy supplied by a photovoltaic system (electricity) or by a solar thermal system (thermal energy). The latter solution is possible ONLY for the 200 LT-S and 260 LT-S versions, whose tank houses a dedicated coil as solar exchanger. The use of this auxiliary energy source is activated and set via dedicated commands directly by the user. PHOTOVOLTAIC SYSTEM EGEA is able to manage the surplus Electricity supplied by a Photovoltaic System through the signaling of the Inverter through a clean contact. In this mode, EGEA will prepare domestic hot water at a higher (settable) temperature Set Point than the ECO/AUTO modes, thus allowing you to exploit the free energy available. But for those who want more .. . The EGEA heat pump water heaters have a WiFi module integrated into the product as standard so that they can be connected to the home WiFi network (WiFi router) and therefore be controlled via the APP. By downloading the dedicated EGEA SMART App for free, you can fully manage EGEA at any time Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 10 -18 Characteristics of heating/DHW operation: Part number: REU-VRM2024WD-LPG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 500 Standard antifreeze down to -20°C Installation: Outdoor - Apartment Dimensions: mm 503x356x181 - 15 Kg Natural gas heat input Min/Max (kW) 3.46/39 Water flow Δt 25°C Min/Max (l/min) 20l/min Max operating temperature (°C) 75 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 1.2 / 10 Electricity consumption normal / stand-by / antifreeze (W) 48 / 2 / 74 IPX5D protection Class NOx5 LPG version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic Range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control Outdoor installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Heat pump water heater Ferroli EGEA LT 200 A+ Wi-Fi integrated Technical features Product code: 2COBA04F Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Characteristics of heating/DHW operation: Nominal accumulation capacity l 192 Maximum capacity of hot water at 40°C l 273 Accumulation dispersion W 63 Average electrical power absorbed Wel 430 Dimensions (Ø x H) mm 621 x 1607 Nominal air flow m3 /h 350/500 Power supply parameters V-Hz 230V - 50H Protection class IP24 Sound power indoors Lw(A) dB(A) 52 Anti-legionella system AutomaticAnti-corrosion system n. 1 Mg anode Operating modes Auto, Eco, Boost, Elec. Heater, Fan EGEA EGEA is a brand new range of storage heat pump water heaters for the production of domestic hot water, suitable for small residential applications. It is a smart solution for heating sanitary water, which uses electricity, air and possibly solar thermal and photovoltaic energy, leaving out the use of traditional fuels. Efficiency, ecology, flexibility and the new aesthetics are the characteristics that distinguish EGEA and differentiate it from a traditional electric water heater . * The 90 and 120 LT models use R-290 gas, a valid “green” alternative to the most common high GWP (Global Warming Potential) refrigerants in the sector. It is a naturally occurring hydrocarbon (HC) with a GWP of 3 and an ODP (Ozone Depletion Potential) of 0 FEATURES at a glance... EGEA mod. 90 / 120 / 200 / 260 EGEA is an air-water heat pump for the production of domestic hot water, storage in an enamelled steel tank, externally wound condenser for maximum safety and hygiene. > Maximum temperature equal to 62°C obtained from renewable energy with heat pump only or by electric resistance (up to 75°C). > Digital interface with programmable TOUCH keys. > Integration via Solar Thermal (LT-S model) or via Electric Resistance (up to 75°C) on all models. > Integration with the Solar Photovoltaic system. INCENTIVES... when saving is a must. EGEA exploits all the features and technology of air-to-water heat pumps for the production of domestic hot water. Only 25% of the The system's energy requirement comes from electricity. FERROLI is at your disposal for technical and documentary support to take advantage of the incentives provided by the Ministerial Decree 02/16/2016) and subsequent extensions and amendments. ELECTRONICS... easier than that! The EGEA user interface features a very simple and intuitive display. > White backlit LEDs for temperature and function management. > Red backlit LEDs for alarm warnings. > The 4 side TOUCH buttons allow EGEA to be switched on/off ( ); navigation in the MENU ( ) and the increase ( + ) or decrease ( - ) of the setting values. INTEGRATION... EGEA gets along with everyone All versions of EGEA provide for the possibility of using renewable energy supplied by a photovoltaic system (electricity) or by a solar thermal system (thermal energy). The latter solution is possible ONLY for the 200 LT-S and 260 LT-S versions, whose tank houses a dedicated coil as solar exchanger. The use of this auxiliary energy source is activated and set via dedicated commands directly by the user. PHOTOVOLTAIC SYSTEM EGEA is able to manage the surplus Electricity supplied by a Photovoltaic System through the signaling of the Inverter through a clean contact. In this mode, EGEA will prepare domestic hot water at a higher (settable) temperature Set Point than the ECO/AUTO modes, thus allowing you to exploit the free energy available. But for those who want more .. . The EGEA heat pump water heaters have a WiFi module integrated into the product as standard so that they can be connected to the home WiFi network (WiFi router) and therefore be controlled via the APP. By downloading the dedicated EGEA SMART App for free, you can fully manage EGEA at any time Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli SKY ECO 14F Low NOx gas water heater complete with methane fume kit - NEW ERP Class (Class G - A) A XL load profile Nominal heat input Max kW 26.9 Thermal power Max / Min kW 24.2 / 9.37 Maximum working pressure 10 bar Maximum sanitary production Δt 25°C / Δt 30°C l/min 13.9 / 11.6 Power supply V/Hz 230 / 50 Dimensions HxL 595x335 mm New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. Sky ECO F Sealed chamber gas water heater, with modulating thermal power and electronic control of the. Combustion. LOW NOx fume emission and SUN EASY system for direct coupling to a solar thermal system SUN EASY Easy... Cheap... Brilliant The SKY ECO range has been designed to be easily integrated with thermal solar systems, with natural or forced circulation. The temperature of the water coming from the solar circuit is constantly monitored and the water heater burner is turned on only if it is not hot enough. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. The heart of water heaters All ECO series water heaters comply with the very strict restrictions on the emission of fumes into the atmosphere, imposed by European regulations. The burners in the ECO range use a particular technology which consists in keeping the flame temperature very low, keeping the gas trains wet. This expedient makes it possible to go well below the limits imposed by the ErP directive which sets the NOx limit at the threshold of 56 mg/kWh. Copper exchanger Interface displays Continuous power modulation Methane / LPG / Propane air Solar systems Also outdoor installation in protected places Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ARISTON ELECTRIC STORAGE WATER HEATER VELIS EVO 100 EU VLS 100 code 3626147 100 LITERS - NEW Technical features Product code: 3626147 Energy label specifications according to the European ErP directive Energy efficiency: Class B Withdrawal profile: M profile Characteristics of heating/DHW operation: Capacity: 100 litres Installation: Multiposition V/H Power: 1500W Voltage: 230V Heating time (ΔT=45°C): 2.50 Time required for the first shower: 50 min Max working pressure: 8 bar Max operating temperature °C 80 Dimensions mm 506 x 1251 x 275 mm ; 32.2kg Protection: IPX4 NEW VELIS evo EU With its new features, the new Velis Evo reaches a new level of comfort, smarter and more elegant. Thanks to the ECO EVO function, Velis Evo memorizes when and how much hot water to use, obtaining maximum energy efficiency. Every time Velis EVO finishes heating enough water to guarantee the first hot shower, the "Shower Ready" symbol lights up on the display. Extra slim and installable horizontally and vertically, the Velis Evo adapts to any environment. Characteristics: Elegant and exclusive design Shower ready function and ECO EVO function Energy class B Anti-noise enamelled resistance Multi position installation h/v Enamelled titanium boiler at 850°C Double magnesium anode and double 5 bolt flange Multifunction LCD display ANTI-LEGIONELLA function To ensure maximum safety and hygiene, the new Ariston products with ABS package are equipped with the anti-legionella function which, if this does not happen for 30 consecutive days, heats the stored water up to 65° c. ANTI-FREEZE function If the water heater is connected to the electricity line, the resistance is activated when the accumulated water temperature drops below 5°C. This system avoids possible breakage due to the expansion caused by the freezing of the water inside. SELF-DIAGNOSTICS function In the event of a fault, the water heater displays the type of problem that has occurred on the front panel via LEDs, allowing for faster repairs. ANTY-DRY function This is a protection system designed to ensure that the water heater does not turn on in the event of a lack of water in the boiler, thus avoiding internal overheating and the consequent breakage of internal components. ELECTRICAL SAFETY function ACTIVE At the end of each water heating cycle, the water heater performs a double disconnection from the electricity line, thus guaranteeing complete safety. ANTI-SCALD function In the event of a thermostat malfunction, the water heater shuts down, preventing the water from overheating up to 100°C and protecting the user from any accidental burns. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Electric water heater Line: Must+ (Rapid) Installation: Under sink Capacity 15 litres ErP energy efficiency class: B Load profile XXS Power/Voltage 1,200/230 W/V Adjustable thermostat: External Dimensions Height x Diameter: 399 x 338 ; 7.4 kg Warranty: 5 years BAXI MUST+ LINE The philosophy that has always guided Baxi is to propose technologically advanced but easy-to-use solutions, offer a 360° service and develop products that meet the needs of users. The wide range of products that has brought Baxi to the role of leader in the heating market takes shape in this perspective: in addition to boilers and heating systems, Baxi has developed a wide range of electric water heaters with capacities from 10 to 100 litres, for domestic hot water. Characteristics: glass-enameled steel boiler temperature regulation with external knob standard ohmic protection (reduced magnesium anode consumption) protective dielectric joint polyurethane insulation without CFC and HCFC analogue thermometer (except 10-15 liter mod.) operating light degree of protection IP24 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Electric water heater Ferroli Calypso Smart SVE 120 Liters Vertical - 2 Years Warranty Technical features Model : Calypso Smart 120 SVE Code : E500B7KA Tank capacity: 120 litres Electric Power: 1500 W Load profile : L ERP class : C Heating time (20+55°C) : 3h - 39 minutes Warranty : 2 Years Dimensions and weight : Height : 1130mm Diameter : 438mm Weight : 35KG Calypso Smart Medium Liter Electric Water Heaters Electric storage water heaters with very high efficiency, vertical and horizontal development with capacities from 50 to 150 litres. Endowed of : Electronic control of the '' SMART '' type able to optimize consumption according to the user's needs Control panel with luminous LEDs for reading the operating temperatures and operating status and convenient buttons for managing the water heater Magnesium anode to protect the tank 5-bolt flange to ensure sturdiness and facilitate periodic maintenance Safety valve set at 8 bar Supplied with three-pole electric cable without plug Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Heat pump water heater Ferroli EGEA LT 200 S A+ Integrated Wi-Fi with integrated coil Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Declared load profile L Characteristics of heating/DHW operation: Nominal accumulation capacity l 187 Maximum capacity of hot water at 40°C l 270 Accumulation dispersion W 63 Average electrical power absorbed Wel 430 Dimensions (Ø x H) mm 621 x 1607 Nominal air flow m3 /h 350/500 Power supply parameters V-Hz 230V - 50H Protection class IP24 Sound power indoors Lw(A) dB(A) 52 Anti-legionella system AutomaticAnti-corrosion system n. 1 Mg anode Operating modes Auto, Eco, Boost, Elec. Heater, Fan EGEA S EGEA is a brand new range of storage heat pump water heaters for the production of domestic hot water, suitable for small residential applications. It is a smart solution for heating sanitary water, which uses electricity, air and possibly solar thermal and photovoltaic energy, leaving out the use of traditional fuels. Efficiency, ecology, flexibility and the new aesthetics are the characteristics that distinguish EGEA and differentiate it from a traditional electric water heater . * The 90 and 120 LT models use R-290 gas, a valid “green” alternative to the most common high GWP (Global Warming Potential) refrigerants in the sector. It is a naturally occurring hydrocarbon (HC) with a GWP of 3 and an ODP (Ozone Depletion Potential) of 0 FEATURES at a glance... EGEA mod. 90 / 120 / 200 / 260 EGEA is an air-water heat pump for the production of domestic hot water, storage in an enamelled steel tank, externally wound condenser for maximum safety and hygiene. > Maximum temperature equal to 62°C obtained from renewable energy with heat pump only or by electric resistance (up to 75°C). > Digital interface with programmable TOUCH keys. > Integration via Solar Thermal (LT-S model) or via Electric Resistance (up to 75°C) on all models. > Integration with the Solar Photovoltaic system. INCENTIVES... when saving is a must. EGEA exploits all the features and technology of air-to-water heat pumps for the production of domestic hot water. Only 25% of the The system's energy requirement comes from electricity. FERROLI is at your disposal for technical and documentary support to take advantage of the incentives provided by the Ministerial Decree 02/16/2016) and subsequent extensions and amendments. ELECTRONICS... easier than that! The EGEA user interface features a very simple and intuitive display. > White backlit LEDs for temperature and function management. > Red backlit LEDs for alarm warnings. > The 4 side TOUCH buttons allow EGEA to be switched on/off ( ); navigation in the MENU ( ) and the increase ( + ) or decrease ( - ) of the setting values. INTEGRATION... EGEA gets along with everyone All versions of EGEA provide for the possibility of using renewable energy supplied by a photovoltaic system (electricity) or by a solar thermal system (thermal energy). The latter solution is possible ONLY for the 200 LT-S and 260 LT-S versions, whose tank houses a dedicated coil as solar exchanger. The use of this auxiliary energy source is activated and set via dedicated commands directly by the user. PHOTOVOLTAIC SYSTEM EGEA is able to manage the surplus Electricity supplied by a Photovoltaic System through the signaling of the Inverter through a clean contact. In this mode, EGEA will prepare domestic hot water at a higher (settable) temperature Set Point than the ECO/AUTO modes, thus allowing you to exploit the free energy available. But for those who want more .. . The EGEA heat pump water heaters have a WiFi module integrated into the product as standard so that they can be connected to the home WiFi network (WiFi router) and therefore be controlled via the APP. By downloading the dedicated EGEA SMART App for free, you can fully manage EGEA at any time Air source heat pump and integrated storage tank for the production of domestic hot water Active defrosting system to be able to operate correctly down to -7°C air temperature R290 ecological gas for mod. 90-120 and R134a for mod. 200-260 Possibility of ducting the exhaust air Hanging (mod. 90-120) and floor (mod. 200-260) installation Stand-on electric resistance (1500 W base - 1200 W wall) Available operating modes: Eco, Auto, Boost, Electric, Fan Wi-Fi card installed as standard and control via smartphone using the "Egea Smart" App Simple and intuitive touch control panel on board the machine Enamelled steel water storage tank with 50 mm polyurethane insulation Main aluminum heat exchanger outside the tank Arrangement with solar coil (“LT-S” version) Double anti-corrosion magnesium anode (mod. 200-260) Programmable anti-legionella cycle Arrangement (digital input) for activation with availability of photovoltaic energy Arrangement (digital input) for activation with reduced electricity rates Arrangement (digital input) for combination with thermal solar systems (“LT-S” models). Integrated management of the forced circulation solar thermal system (“LT-S” models). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Acquaprojet Blue 17 Fi Product Code : A7754406 Power supply: Methane Ignition: Electronic with cable Flame control: Ionization Performance Hot water production ?T=25°C : 17 l/min Nominal heat output: 33.3 kW Nominal thermal power: 29.4 kW Energy efficiency class: A Water heating energy efficiency: 80% Load profile: XL Nominal pressure: 20 bar Sound power level inside: 56 kW Maximum electrical power absorbed: 74 W Degree of protection: IPX5D Waterfall Water sampling range: 2 to 12 l/min Water temperature adjustment range: 37° - 60° C Minimum pressure: 0.13 bar Maximum pressure: 10 bar Installation data Diameter of water connection pipes: 1/2" Gas connection pipe diameter: 3/4'' Coaxial flue pipe diameter: 60/100 mm Diameter of the split flue pipe: 80/80 mm Dimensions and weight Dimensions (HxWxD): 617x385x222 mm Weight: 17.0 Kg Baxi Acquaprojet Blue Instantaneous gas water heater with sealed chamber Baxi offers a complete range of instantaneous gas water heaters, designed and produced in Italy, to guarantee high sanitary comfort, savings and ease of use. All models comply with Regulation (EU) 2016/426. The Acquaprojet Blue water heaters with sealed chamber, with a modern design and high resistance to UV rays and atmospheric agents of the polyester paint coating, guarantee considerable durability over time. High modulation The 14 and 17 litre models , methane or LPG, characterised by high modulation (1:6) , represent the ideal comfort solution for those who want domestic hot water at a constant temperature in any condition , in the case of small or large withdrawals or multiple simultaneous withdrawals. The wide modulation range allows a significant reduction in consumption and an increase in efficiency. The improved control of water temperature avoids frequent on/off switching, rewarding user comfort. Easy and intuitive control panel Acquaprojet Blue water heaters are equipped with a dashboard with a simple design and an LCD display that allows you to view the set temperature and any anomaly or fault. With a simple touch on the button, located in the center of the panel, you can turn the appliance on/off and the knob allows you to adjust the water temperature. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Acquaprojet Blue 17 Fi Product Code : A7754408 Power supply: LPG Ignition: Electronic with cable Flame control: Ionization Performance Hot water production ?T=25°C : 17 l/min Nominal heat output: 33.3 kW Nominal thermal power: 29.4 kW Energy efficiency class: A Water heating energy efficiency: 80% Load profile: XL Nominal pressure: 28/30 - 37 bar Sound power level inside: 56 kW Maximum electrical power absorbed: 74 W Degree of protection: IPX5D Waterfall Water sampling range: 2 to 12 l/min Water temperature adjustment range: 37° - 60° C Minimum pressure: 0.13 bar Maximum pressure: 10 bar Installation data Diameter of water connection pipes: 1/2" Gas connection pipe diameter: 3/4'' Coaxial flue pipe diameter: 60/100 mm Diameter of the split flue pipe: 80/80 mm Dimensions and weight Dimensions (HxWxD): 617x385x222 mm Weight: 17.0 Kg Baxi Acquaprojet Blue Instantaneous gas water heater with sealed chamber Baxi offers a complete range of instantaneous gas water heaters, designed and produced in Italy, to guarantee high sanitary comfort, savings and ease of use. All models comply with Regulation (EU) 2016/426. The Acquaprojet Blue water heaters with sealed chamber, with a modern design and high resistance to UV rays and atmospheric agents of the polyester paint coating, guarantee considerable durability over time. High modulation The 14 and 17 litre models , methane or LPG, characterised by high modulation (1:6) , represent the ideal comfort solution for those who want domestic hot water at a constant temperature in any condition , in the case of small or large withdrawals or multiple simultaneous withdrawals. The wide modulation range allows a significant reduction in consumption and an increase in efficiency. The improved control of water temperature avoids frequent on/off switching, rewarding user comfort. Easy and intuitive control panel Acquaprojet Blue water heaters are equipped with a dashboard with a simple design and an LCD display that allows you to view the set temperature and any anomaly or fault. With a simple touch on the button, located in the center of the panel, you can turn the appliance on/off and the knob allows you to adjust the water temperature. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less