icon Heat Pump Water Heater Ferroli Egea Lt 90 A+ Integrated Wi-Fi | CaldaieMurali

Heat Pump Water Heater Ferroli Egea Lt 90 A+ Integrated Wi-Fi

Description

Heat pump water heater Ferroli EGEA LT 90 A+ Wi-Fi integrated


Technical features

  • Product code: 2COBA00F
Energy label specifications according to the European ErP directive
  • Energy efficiency: Class A+

Characteristics of heating/DHW operation:

  • Nominal accumulation capacity l 89
  • Maximum capacity of hot water at 40°C l 98
  • Storage dispersion W 40
  • Average electrical power absorbed Wel 270
  • Dimensions (Ø x H) mm 510 x 1380
  • Nominal air flow m3 /h 190
  • Required room volume m3 15
  • Power supply parameters V-Hz 230V - 50H
  • Protection class IP24
  • Sound power indoors Lw(A) dB(A) 52
  • Anti-legionella system AutomaticAnti-corrosion system n. 1 Mg anode
  • Operating modes Auto, Eco, Boost, Elec. Heater, Fan

EGEA

EGEA is a brand new range of storage heat pump water heaters for the production of domestic hot water, suitable for small residential applications. It is a smart solution for heating sanitary water, which uses electricity, air and possibly solar thermal and photovoltaic energy, leaving out the use of traditional fuels. Efficiency, ecology, flexibility and the new aesthetics are the characteristics that distinguish EGEA and differentiate it from a traditional electric water heater
.

* The 90 and 120 LT models use R-290 gas, a valid “green” alternative to the most common high GWP (Global Warming Potential) refrigerants in the sector. It is a naturally occurring hydrocarbon (HC) with a GWP of 3 and an ODP (Ozone Depletion Potential) of 0

FEATURES at a glance...

EGEA mod. 90 / 120 / 200 / 260

EGEA is an air-water heat pump for the production of domestic hot water, storage in an enamelled steel tank,
externally wound condenser for maximum safety and hygiene.

> Maximum temperature equal to 62°C obtained from renewable energy with heat pump only or by electric resistance (up to 75°C).
> Digital interface with programmable TOUCH keys.
> Integration via Solar Thermal (LT-S model) or via Electric Resistance (up to 75°C) on all models.
> Integration with the Solar Photovoltaic system.

INCENTIVES... when saving is a must.

EGEA exploits all the features and technology of air-to-water heat pumps for the production of domestic hot water. Only 25% of the
The system's energy requirement comes from electricity. FERROLI is at your disposal for technical and documentary support to take advantage of the incentives provided by the Ministerial Decree 02/16/2016) and subsequent extensions and amendments.

ELECTRONICS... easier than that!

The EGEA user interface features a very simple and intuitive display.
> White backlit LEDs for temperature and function management.
> Red backlit LEDs for alarm warnings.
> The 4 side TOUCH buttons allow EGEA to be switched on/off ( ); navigation in the MENU ( ) and the increase ( + ) or decrease ( - ) of the setting values.

INTEGRATION... EGEA gets along with everyone

All versions of EGEA provide for the possibility of using renewable energy supplied by a photovoltaic system (electricity) or by a solar thermal system (thermal energy). The latter solution is possible ONLY for the 200 LT-S and 260 LT-S versions, whose tank houses
a dedicated coil as solar exchanger. The use of this auxiliary energy source is activated and set via dedicated commands directly by the user.

PHOTOVOLTAIC SYSTEM

EGEA is able to manage the surplus Electricity supplied by a Photovoltaic System through the signaling of the Inverter through a clean contact. In this mode, EGEA will prepare domestic hot water at a higher (settable) temperature Set Point than the ECO/AUTO modes, thus allowing you to exploit the free energy available.

But for those who want more .. .

The EGEA heat pump water heaters have a WiFi module integrated into the product as standard so that they can be connected to the home WiFi network (WiFi router) and therefore be controlled via the APP.
By downloading the dedicated EGEA SMART App for free, you can fully manage EGEA at any time

Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Heat Pump Water Heater Ferroli Egea Lt 90 A+ Integrated Wi-Fi

Product form

Heat pump water heater Ferroli EGEA LT 90 A+ Wi-Fi integrated Technical features Product code: 2COBA00F Energy label specifications according... Read more

€1.030,00 Incl. VAT

    Description

    Heat pump water heater Ferroli EGEA LT 90 A+ Wi-Fi integrated


    Technical features

    • Product code: 2COBA00F
    Energy label specifications according to the European ErP directive
    • Energy efficiency: Class A+

    Characteristics of heating/DHW operation:

    • Nominal accumulation capacity l 89
    • Maximum capacity of hot water at 40°C l 98
    • Storage dispersion W 40
    • Average electrical power absorbed Wel 270
    • Dimensions (Ø x H) mm 510 x 1380
    • Nominal air flow m3 /h 190
    • Required room volume m3 15
    • Power supply parameters V-Hz 230V - 50H
    • Protection class IP24
    • Sound power indoors Lw(A) dB(A) 52
    • Anti-legionella system AutomaticAnti-corrosion system n. 1 Mg anode
    • Operating modes Auto, Eco, Boost, Elec. Heater, Fan

    EGEA

    EGEA is a brand new range of storage heat pump water heaters for the production of domestic hot water, suitable for small residential applications. It is a smart solution for heating sanitary water, which uses electricity, air and possibly solar thermal and photovoltaic energy, leaving out the use of traditional fuels. Efficiency, ecology, flexibility and the new aesthetics are the characteristics that distinguish EGEA and differentiate it from a traditional electric water heater
    .

    * The 90 and 120 LT models use R-290 gas, a valid “green” alternative to the most common high GWP (Global Warming Potential) refrigerants in the sector. It is a naturally occurring hydrocarbon (HC) with a GWP of 3 and an ODP (Ozone Depletion Potential) of 0

    FEATURES at a glance...

    EGEA mod. 90 / 120 / 200 / 260

    EGEA is an air-water heat pump for the production of domestic hot water, storage in an enamelled steel tank,
    externally wound condenser for maximum safety and hygiene.

    > Maximum temperature equal to 62°C obtained from renewable energy with heat pump only or by electric resistance (up to 75°C).
    > Digital interface with programmable TOUCH keys.
    > Integration via Solar Thermal (LT-S model) or via Electric Resistance (up to 75°C) on all models.
    > Integration with the Solar Photovoltaic system.

    INCENTIVES... when saving is a must.

    EGEA exploits all the features and technology of air-to-water heat pumps for the production of domestic hot water. Only 25% of the
    The system's energy requirement comes from electricity. FERROLI is at your disposal for technical and documentary support to take advantage of the incentives provided by the Ministerial Decree 02/16/2016) and subsequent extensions and amendments.

    ELECTRONICS... easier than that!

    The EGEA user interface features a very simple and intuitive display.
    > White backlit LEDs for temperature and function management.
    > Red backlit LEDs for alarm warnings.
    > The 4 side TOUCH buttons allow EGEA to be switched on/off ( ); navigation in the MENU ( ) and the increase ( + ) or decrease ( - ) of the setting values.

    INTEGRATION... EGEA gets along with everyone

    All versions of EGEA provide for the possibility of using renewable energy supplied by a photovoltaic system (electricity) or by a solar thermal system (thermal energy). The latter solution is possible ONLY for the 200 LT-S and 260 LT-S versions, whose tank houses
    a dedicated coil as solar exchanger. The use of this auxiliary energy source is activated and set via dedicated commands directly by the user.

    PHOTOVOLTAIC SYSTEM

    EGEA is able to manage the surplus Electricity supplied by a Photovoltaic System through the signaling of the Inverter through a clean contact. In this mode, EGEA will prepare domestic hot water at a higher (settable) temperature Set Point than the ECO/AUTO modes, thus allowing you to exploit the free energy available.

    But for those who want more .. .

    The EGEA heat pump water heaters have a WiFi module integrated into the product as standard so that they can be connected to the home WiFi network (WiFi router) and therefore be controlled via the APP.
    By downloading the dedicated EGEA SMART App for free, you can fully manage EGEA at any time

    Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 100.0 kg
    • classe efficienza energetica: A+
    • installazione: VERTICAL
    • litri: 90
    • marca: ferroli
    • modello: 2COBA00F
    • tipologia : heat pump, integrated wifi
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account