Heat pump water heater Ferroli EGEA LT 120 A+ Wi-Fi integrated Technical features Product code: 2COBA01F Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Characteristics of heating/DHW operation: Nominal accumulation capacity l 118 Maximum capacity of hot water at 40°C l 128 Accumulation dispersion W 46 Average electrical power absorbed Wel 270 Dimensions (Ø x H) mm 510 x 1530 Nominal air flow m3 /h 190 Required room volume m3 15 Power supply parameters V-Hz 230V - 50H Protection class IP24 Sound power indoors Lw(A) dB(A) 52 Anti-legionella system AutomaticAnti-corrosion system n. 1 Mg anode Operating modes Auto, Eco, Boost, Elec. Heater, Fan EGEA EGEA is a brand new range of storage heat pump water heaters for the production of domestic hot water, suitable for small residential applications. It is a smart solution for heating sanitary water, which uses electricity, air and possibly solar thermal and photovoltaic energy, leaving out the use of traditional fuels. Efficiency, ecology, flexibility and the new aesthetics are the characteristics that distinguish EGEA and differentiate it from a traditional electric water heater . * The 90 and 120 LT models use R-290 gas, a valid “green” alternative to the most common high GWP (Global Warming Potential) refrigerants in the sector. It is a naturally occurring hydrocarbon (HC) with a GWP of 3 and an ODP (Ozone Depletion Potential) of 0 FEATURES at a glance... EGEA mod. 90 / 120 / 200 / 260 EGEA is an air-water heat pump for the production of domestic hot water, storage in an enamelled steel tank, externally wound condenser for maximum safety and hygiene. > Maximum temperature equal to 62°C obtained from renewable energy with heat pump only or by electric resistance (up to 75°C). > Digital interface with programmable TOUCH keys. > Integration via Solar Thermal (LT-S model) or via Electric Resistance (up to 75°C) on all models. > Integration with the Solar Photovoltaic system. INCENTIVES... when saving is a must. EGEA exploits all the features and technology of air-to-water heat pumps for the production of domestic hot water. Only 25% of the The system's energy requirement comes from electricity. FERROLI is at your disposal for technical and documentary support to take advantage of the incentives provided by the Ministerial Decree 02/16/2016) and subsequent extensions and amendments. ELECTRONICS... easier than that! The EGEA user interface features a very simple and intuitive display. > White backlit LEDs for temperature and function management. > Red backlit LEDs for alarm warnings. > The 4 side TOUCH buttons allow EGEA to be switched on/off ( ); navigation in the MENU ( ) and the increase ( + ) or decrease ( - ) of the setting values. INTEGRATION... EGEA gets along with everyone All versions of EGEA provide for the possibility of using renewable energy supplied by a photovoltaic system (electricity) or by a solar thermal system (thermal energy). The latter solution is possible ONLY for the 200 LT-S and 260 LT-S versions, whose tank houses a dedicated coil as solar exchanger. The use of this auxiliary energy source is activated and set via dedicated commands directly by the user. PHOTOVOLTAIC SYSTEM EGEA is able to manage the surplus Electricity supplied by a Photovoltaic System through the signaling of the Inverter through a clean contact. In this mode, EGEA will prepare domestic hot water at a higher (settable) temperature Set Point than the ECO/AUTO modes, thus allowing you to exploit the free energy available. But for those who want more .. . The EGEA heat pump water heaters have a WiFi module integrated into the product as standard so that they can be connected to the home WiFi network (WiFi router) and therefore be controlled via the APP. By downloading the dedicated EGEA SMART App for free, you can fully manage EGEA at any time Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ADJUSTABLE THERMOSTAT FOR ELECTRIC WATER HEATERS. SUITABLE FOR 30/50/80 LITERS EGO MODELS. RATED VOLTAGE CURRENT 16A/250V

Read more less

Electric water heater ISEA SWING Plus 100 liters VE Vertical 5 year warranty Ferroli group Model: Indoor unit catalog code: E400U37I Model: 100 l vertical Warranty: 5 Years Tank capacity: 100 litres Voltage: 220-240V Electric Power: 1200W ErP C class Heating time: 20°-55° 2h 3min Degree of protection: IP24 Swing The medium-capacity ISEA electric water heaters, available from 50 to 150 litres, both vertical and horizontal, represent the ideal solution for meeting household hot water production needs. These appliances, offered in the SWING and SWING PLUS variants, contain all ISEA technology and experience to guarantee maximum efficiency, energy savings and long product life. All medium-sized water heaters are designed for wall mounting. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 16 EU METHANE - new ErP model Product code: 3632258 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 28.0 Minimum thermal power kW 5.0 Modulation range 1 : 5.6 Nominal heat input kW 31.0 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 48 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 563 x 350 x 130 mm Weight: 12.8kg Power supply: METHANE Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Atlantic EAN: 3410538212467 Data sheet Absorbed power (W): 1200 Voltage (V): 230 (220-240) Energy consumption (kWh/24h at 65°C): 0.48 Heating time at 35°C (Δt=20°C): 0h13 Heating time at 60°C (Δt=50°C): 0h32 Dimensions H:456 Ø: 255 A: 166 B:166 C:290 Q: 64 E: 262 F: - G: - Inspection flange (Ø-mm): 72 Net weight (Kg): 8 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open Chamber Water Heater Ferroli ZEFIRO ECO C 14 Low NOx LPG - NEW Model: Zefiro Eco 14 LPG ERP Class (Class G - A) A Load profile M Nominal heat input (Pn) kW 26.8 Useful power Min / Max kW 9.5 / 23.7 Maximum working pressure 10 bar Sanitary production: Δt 25°C l/min 13.9 Δt 30°C l/min 11.3 Sanitary temperature regulation Min / Max °C 40 / 65 Battery power supply NB: LPG OPERATION THROUGH TRANSFORMATION New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. ZEFIRO ECO Wall mounted gas water heater with natural draft and open chamber, low nox type - Copper exchanger - Interface display - Power modulation - Methane / LPG / Propane air - Solar systems - Battery powered STRENGTHS: Copper heat exchanger with finned tubes, externally finished with an aluminum anti-corrosion treatment Modulating heat input and fine adjustment of the outlet hot water temperature Easy and immediate reading display with indicators on the operation of the appliance and the charge of the power supply batteries. Adjustment of power and hot water temperature with comfortable ergonomic knobs Battery powered ADVANTAGES OF ZEFIRO ECO: Available for operation with Natural Gas, LPG and Propane Air (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center at the maximum total price of 30 euros + VAT) Wide range of regulation of hot water temperature and power modulation Compact dimensions and low weight Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

NB IN CASE OF ABSENCE OF THE PRODUCT THE 2019 MODEL OPALIA LOW NOX WILL BE SHIPPED !!!!!!!!!!!!!!!!!!!!!!!!! Technical features Efficiency class: A Sanitary load profile: M Min/max rated power: kW 6.4 - 19.2 Type of regulation: Modulating Ignition type: Electronic Specific flow rate (∆T=25 K): l/min 11 Minimum ignition flow l/min 2.7 Minimum supply pressure bar 0.1 Characteristics Flame modulation in relation to the temperature detected by the probe at the exchanger outlet Water heater status display and fault diagnostics Safety thermostat that blocks the water heater in the event of overheating at the exchanger outlet Modulating gas valve Flow sensor Copper lamellar heat exchanger Smoke pressure switch Standard antifreeze system (water heater ignition at 7 °C) Dimensions Dimensions (hxwxd): 627/348/240 mm ; 18.6 kgs Fume outlet diameter mm 80/80-60/100

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 20 EU MET - new ErP model Technical features Product code: 3632259 Energy label specifications according to the European ErP directive Energy efficiency: Class B Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 36.1 Minimum thermal power kW 7.2 Modulation range 1 : 5.0 Nominal heat input kW 40 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow rate l/min > 3.8 Flow rate (ΔT 25°C) l/min 20 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 63 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 582 x 375 x 160 mm Weight: 17.5kg Power supply: LPG or methane Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features ErP energy class: Class A Nominal heat output: 21.3 kW DHW direct withdrawal range ΔT = 25°C: 2.5 - 11 l/min Forced draft sealed chamber Ignition: electronic Compact dimensions (HxDxL): 600x183x385 mm Power supply: LPG General characteristics turboMAG plus Extremely compact dimensions Wide modulation range Perfect dispensing temperature stability Design and intuitive touch screen Energy efficiency class up to A depending on the model. Domestic hot water Instantaneous forced draft water heaters, with electronic ignition with wide modulation range and extremely compact dimensions: among the smallest on the market. The turboMAG plus water heaters guarantee plenty of hot water immediately, always at a constant temperature and maximum operational safety. Precisely safety is the added value of this range of water heaters. The Vaillant research and development team, which has been focused on ensuring leadership in the sector for over 140 years, has developed turboMAG plus with the target of safety: in fact, 26 control to ensure maximum user reliability. The new turboMAG plus are water heaters equipped with a three-stage combustion system which broaden the modulation range ensuring perfect temperature stability during hot water delivery. A new exchanger raises the performance of the water heater which, in the 11 – 14 – 16 liters per minute versions, offers a flexible choice for every user. turboMAG plus allows 360° installation flexibility: inside apartments and also outside, resisting temperatures down to -15°C (thanks to the antifreeze accessory) and rain (IPX5D approval). A solar kit as an accessory also allows you to pre-heat the incoming water, further reducing gas consumption. turboMAG plus (hot water production) is the new version of forced draught water heaters with DHW flow rates of: 11, 14 and 16 litres/minute running on Natural Gas and LPG. Quality Continuous development since 1874: Vaillant has been accredited for its superior quality Careful selection of components that meet the highest requirements and guarantee perfect functionality Modern Design: The well-designed casing with high-quality appearance that fits perfectly into your home Total safety: 26 safety functions guarantee the functioning of the appliance Water heater interface with touch screen (IMD): Display with maximum water protection IPX5D protection : Tested with water jets up to a maximum of 12.5 l/min from all directions Flexible and efficient Exchanger with high efficiency: Water heating with minimum gas consumption and lower bill consumption Burner with high modulation : Precise regulation of the thermal power in relation to the DHW request Reduced noise thanks to fan modulation : between 2,400 and 4,800 rpm Various DHW production profiles (bath or shower): - Bath filling mode: monitoring of the filling volume - Normal: temperature setting 38-60 °C Simplified replacement: Same flue position and wall bracket, Reduced installation time High comfort 11, 14 & 16 liters of DHW production High modulation 1:4 Maximum temperature stability in DHW supply : Avoid unwanted temperature variations 3 level combustion : High modulation range 25-100% Ecodesign Directive (ErP) 2015 How to be ready for new EU legislation What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed. ErP and ELD: what do they mean and how are they different? ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: - Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. When and how will the new rules apply? On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products What do the new rules mean for the end customer? Unlike household appliances, energy labels on heating and domestic hot water products and systems can only offer a first orientation and will not necessarily provide the best solution for a certain type of installation, nor will they give indications on the assumed cost of energy when obtains a high energy classification. For example, it is not said that a heat pump which presumably will have a higher efficiency class than a condensing boiler can then actually be used in a given type of building. This is why the advice of a competent technician is still necessary to understand the label and select the best product or system that best meets the needs of your building. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater Junkers Bosch Open Chamber THERM 4204 11 Liters Low NOx Methane - News Technical features Model : Therm 4204 Typology : Open chamber with natural draft Heating Energy Class: A Declared load profile : M Minimum / Nominal Thermal Power: 10.6 / 17.4 kW Minimum / Nominal Heat Capacity: 12 / 19.8 kW Modulation range : 10.6 - 17.4 kW Max water flow with ΔT 25 °C 10.0 (l/min) Sound power level indoors : 69 dB Daily fuel consumption : 8.938 kWh Efficiency at 100% of nominal heat input: 88% NOx nitrogen oxide emissions : 35 mg/kWh Maximum operating pressure: 12 bar Minimum operating pressure: 0.35 bar Maximum sound pressure : 69 dB(A) Power supply: methane Dimensions and weight Dimensions (H x W x D ) : 655 x 310 x 225 mm Weight : 10.8Kg Therm 4204 Low emission instantaneous gas water heater with triple safety system Triple security system Battery powered, no mains connection required Adaptation of gas consumption on the basis of real needs New elegant rounded design Advantages Maximum security Triple safety system consisting of the smoke exhaust sensor, the temperature limiter and a control device which cuts off the gas flow in the event of ignition failure or accidental shutdown Optimized consumption The gas consumption of the water heater is adapted to your real needs, thanks to the continuous modulation of the flame Easy to Install The Therm 4204 water heater does not require electrical connections as it is battery powered. It is also designed to minimize NOx emissions and can be combined with solar thermal systems for the production of domestic hot water (using the appropriate accessory) New Design Discover the new elegant and modern design. New rounded aesthetics and intuitive handling thanks to the front display Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Energy label specifications according to the European ErP directive   Sanitary Energy Efficiency : Class A Load profile: M Exercise features: Open chamber with natural draft Ignition - 1.5 battery Flame control - by ionization Rated thermal power: 19kW Hot water production Δ T=25°C: 11 l/min Min/max pressure bar 0.3/10 Ø water and gas connections - 1/2” Dimensions (HxLxP): mm 580 x 310 x 215; 9.5 kgs The guarantee is the Official Beretta Italia one, and has a duration of 24 months Power supply: METHANE General characteristics SOURCE 2 DGT Fonte 2 DGT, hot water in compact dimensions From Beretta's experience and technological research comes the new line of Fonte 2 DGT water heaters, designed to offer maximum sanitary comfort, maximum energy savings and greater simplicity of use. Thanks to its extremely compact dimensions, Fonte 2 DGT can also be placed in limited spaces and therefore represents the ideal solution to meet the installation needs of modern living contexts. The range, open ionization chamber with battery ignition, two water filters as standard and with codes for both methane and LPG, is made up of the Fonte 2 DGT versions with 11 and 14 litres/min models and Fonte 2 DGT FLEX with a from 11 litres/min. The FLEX versions also include the hoses and the sanitary tap. Source 2 DGT: high energy class and low consumption The Fonte 2 DGT line of water heaters is equipped with the special device known as the Economiser, specifically designed to combine maximum user comfort with significant energy and cost savings. The activation of the Economizer in fact allows to reduce the gas consumption up to over 50%, limiting the maximum thermal power supplied, when the usage requirements are contained (low temperature difference or reduced sampling flow rates, such as for example during summertime). Furthermore, on all Fonte 2 DGT models, the Economizer can be adjusted progressively by the user, according to needs, achieving maximum savings in the low flame position. Finally, the appliances in the Fonte 2 DGT range are equipped with flame modulation which, by adapting gas consumption to individual withdrawal requests, allows the temperature of the water supplied to be kept almost constant, compatibly with the settings made and the power of the water heater. The Beretta Fonte 2 DGT water heater guarantees always very low gas consumption and respect for the environment. Beretta Fonte 2 DGT complies with the current ERP regulation placing itself in CLASS A for energy consumption. Functionality and ease of use The Fonte 2 DGT water heaters, with a linear and essential design, have an ergonomic dashboard which houses two knobs which allow you to manage all the functions of the appliance in a simple and intuitive way and a display which shows the temperature of the domestic hot water produced. The left knob, in addition to the on/off functions, activates the "Gas economizer" device, which can be adjusted between the small flame and the large flame, allowing the user to make interesting gas savings. The right knob allows you to set the temperature of the water supplied, by regulating the quantity of water at the outlet Characteristics: Instantaneous open chamber water heater with Natural Gas and LPG versions Abundant production of domestic hot water: 11 or 14 litres/min Digital display with indication of domestic hot water temperature Battery ignition and ionisation flame presence control Gas economizer with 8 regulation steps Modulating flame regulation system Simple and intuitive control panel Compact size and simple installation without removing the shell Assembly template supplied (gasket and hose holder for LPG versions) New easy access water connections on the same horizontal axis New latest generation water/gas group with integrated gas pressure regulator Double inlet water filter Safety microswitch to protect the batteries (2 x 1.5 Volt type D) in the OFF position Temperature selector FLEX versions with flexible fittings and standard tap Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Catalog code: 7736504169 Open chamber with natural draft; Energy class: A; Load profile: M; Nominal thermal power: 19.1 kW; Nominal heat input: 22.0 kW; Manual power adjustment range (min.-max.): 8.5-19.1 kW; Max water flow with ΔT 25 °C: 11 l/min; Efficiency at 100% of nominal heat input (on PCI) 87.0%; Maximum operating pressure allowed (Pw)(2):12 bar; Maximum sound pressure: 68dB(A); Power supply: METHANE . Composed of: Electronic ignition by batteries; Extremely compact dimensions; Natural gas burner, convertible to LPG with accessory kit; Fixed power; General characteristics Therm 2200 innovative and very simple to use, produced in Europe is perfect for the quality/price ratio. The Therm 2200 water heater has a control panel from which it is easy to program and satisfy all your needs, offering you maximum comfort. It offers many advantages, because in addition to being particularly suitable for double tap systems, it can be connected directly to solar thermal systems for the production of domestic hot water and finally it has high energy savings compared to traditional water heaters thanks to the modulating power and the 'absence of pilot flame. Dimensions (HxWxD) 580x310x220mm; Weight: 11.

Read more less