icon Vaillant Turbomag Plus 11-2/0-5 LPG Gas Water Heater Complete With Smoke Exhaust Kit New | CaldaieMurali

Vaillant Turbomag Plus 11-2/0-5 LPG Gas Water Heater Complete With Smoke Exhaust Kit New

Description


Technical features

ErP energy class: Class A
  • Nominal heat output: 21.3 kW
  • DHW direct withdrawal range ΔT = 25°C: 2.5 - 11 l/min
  • Forced draft sealed chamber
  • Ignition: electronic
  • Compact dimensions (HxDxL): 600x183x385 mm
  • Power supply: LPG


General characteristics

turboMAG plus

Extremely compact dimensions
Wide modulation range
Perfect dispensing temperature stability
Design and intuitive touch screen
Energy efficiency class up to A depending on the model.
Domestic hot water

Instantaneous forced draft water heaters, with electronic ignition with wide modulation range and extremely compact dimensions: among the smallest on the market.

Quality

  • Continuous development since 1874: Vaillant has been accredited for its superior quality
  • Careful selection of components that meet the highest requirements and guarantee perfect functionality
  • Modern Design: The well-designed casing with high-quality appearance that fits perfectly into your home
  • Total safety: 26 safety functions guarantee the functioning of the appliance
  • Water heater interface with touch screen (IMD): Display with maximum water protection
  • IPX5D protection : Tested with water jets up to a maximum of 12.5 l/min from all directions

Flexible and efficient

  • Exchanger with high efficiency: Water heating with minimum gas consumption and lower bill consumption
  • Burner with high modulation : Precise regulation of the thermal power in relation to the DHW request
  • Reduced noise thanks to fan modulation : between 2,400 and 4,800 rpm
Various DHW production profiles (bath or shower):
- Bath filling mode: monitoring of the filling volume
- Normal: temperature setting 38-60 °C
Simplified replacement: Same flue position and wall bracket, Reduced installation time

High comfort

11, 14 & 16 liters of DHW production
High modulation 1:4
Maximum temperature stability in DHW supply : Avoid unwanted temperature variations
3 level combustion : High modulation range 25-100%


Ecodesign Directive (ErP) 2015

How to be ready for new EU legislation

What will happen from 26 September 2015?

From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR).

Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed.

ErP and ELD: what do they mean and how are they different?

ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector:

- Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators.

- Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres.

ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label.

When and how will the new rules apply?

On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products

What do the new rules mean for the end customer?

Unlike household appliances, energy labels on heating and domestic hot water products and systems can only offer a first orientation and will not necessarily provide the best solution for a certain type of installation, nor will they give indications on the assumed cost of energy when obtains a high energy classification. For example, it is not said that a heat pump which presumably will have a higher efficiency class than a condensing boiler can then actually be used in a given type of building. This is why the advice of a competent technician is still necessary to understand the label and select the best product or system that best meets the needs of your building.

Product Guarantee


All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Vaillant Turbomag Plus 11-2/0-5 LPG Gas Water Heater Complete With Smoke Exhaust Kit New

Product form

Technical features ErP energy class: Class A Nominal heat output: 21.3 kW DHW direct withdrawal range ΔT = 25°C: 2.5... Read more

€484,00 Incl. VAT

    Description


    Technical features

    ErP energy class: Class A
    • Nominal heat output: 21.3 kW
    • DHW direct withdrawal range ΔT = 25°C: 2.5 - 11 l/min
    • Forced draft sealed chamber
    • Ignition: electronic
    • Compact dimensions (HxDxL): 600x183x385 mm
    • Power supply: LPG


    General characteristics

    turboMAG plus

    Extremely compact dimensions
    Wide modulation range
    Perfect dispensing temperature stability
    Design and intuitive touch screen
    Energy efficiency class up to A depending on the model.
    Domestic hot water

    Instantaneous forced draft water heaters, with electronic ignition with wide modulation range and extremely compact dimensions: among the smallest on the market.

    Quality

    • Continuous development since 1874: Vaillant has been accredited for its superior quality
    • Careful selection of components that meet the highest requirements and guarantee perfect functionality
    • Modern Design: The well-designed casing with high-quality appearance that fits perfectly into your home
    • Total safety: 26 safety functions guarantee the functioning of the appliance
    • Water heater interface with touch screen (IMD): Display with maximum water protection
    • IPX5D protection : Tested with water jets up to a maximum of 12.5 l/min from all directions

    Flexible and efficient

    • Exchanger with high efficiency: Water heating with minimum gas consumption and lower bill consumption
    • Burner with high modulation : Precise regulation of the thermal power in relation to the DHW request
    • Reduced noise thanks to fan modulation : between 2,400 and 4,800 rpm
    Various DHW production profiles (bath or shower):
    - Bath filling mode: monitoring of the filling volume
    - Normal: temperature setting 38-60 °C
    Simplified replacement: Same flue position and wall bracket, Reduced installation time

    High comfort

    11, 14 & 16 liters of DHW production
    High modulation 1:4
    Maximum temperature stability in DHW supply : Avoid unwanted temperature variations
    3 level combustion : High modulation range 25-100%


    Ecodesign Directive (ErP) 2015

    How to be ready for new EU legislation

    What will happen from 26 September 2015?

    From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR).

    Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed.

    ErP and ELD: what do they mean and how are they different?

    ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector:

    - Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators.

    - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres.

    ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label.

    When and how will the new rules apply?

    On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products

    What do the new rules mean for the end customer?

    Unlike household appliances, energy labels on heating and domestic hot water products and systems can only offer a first orientation and will not necessarily provide the best solution for a certain type of installation, nor will they give indications on the assumed cost of energy when obtains a high energy classification. For example, it is not said that a heat pump which presumably will have a higher efficiency class than a condensing boiler can then actually be used in a given type of building. This is why the advice of a competent technician is still necessary to understand the label and select the best product or system that best meets the needs of your building.

    Product Guarantee


    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 23.0 kg
    • gas: LPG
    • litri: 11
    • marca: VAILLANT
    • modello: TurboMag Plus 11-2/05 Gpl
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account