Heat water efficiently and ecologically thanks to heat pump water heaters. Energy saving, reliable performance. Choose from our range of heat pump water heaters for a sustainable and cost effective option for your bathroom. Buy today and enjoy hot water efficiently!
Heat pump water heaters
IMMERGAS Immergas Rapax 100 V2 Heat Pump Water Heater 100 Liters 3.028366
Heat Pump Water Heater Immergas RAPAX 100 V2 100 liters 3.028366 Code 3.028366 Storage capacity (litres) 100 Rated power kW 0.96 Dimensions (HxWxD) mm 1209 x 522 x 538 R134A fluid COP T amb. 15°C 2.75 COP T amb. 7°C 2.47 RAPAX extension RAPAX V3 water heaters can completely eliminate the consumption of gas to heat domestic water because they use the same principle as heat pumps. They are one of the new, effective Immergas solutions for making the best use of renewable energy sources. Floor-standing versions are available with 270-litre (RAPAX 300 V3) vitrified steel storage tank, or 200-litre (RAPAX 200 V3) storage tank and a wall-mounted version with 100-litre vitrified steel storage tank (RAPAX 100 V2). RAPAX 300 V3 is particularly suitable for renovating and building heating systems in villas or single houses when it is necessary to cover 50% of domestic hot water consumption with renewable energy sources. RAPAX 100 V2 was created to complete the offer of systems both for new homes, especially condominiums, and for the replacement of existing gas or electric water heaters. The entire range represents an excellent alternative to solar; can be used in systems built to operate without gas for the production of domestic hot water and in combination with a heat pump, for to air condition. All RAPAX V3 water heaters are equipped with specific predispositions to make the most of the photovoltaic system and, in the RAPAX 200/300 SOL V3 versions, the combination with solar thermal systems. REDUCED CONSUMPTION AND RESPECT FOR THE ENVIRONMENT The RAPAX V3 series greatly reduces polluting emissions compared to a traditional gas water heater. Thanks to the heat pump, it uses the heat in the air as a source of renewable and free energy to heat the water with improved COPs. Furthermore, through an electrical predisposition, it can accumulate the excess energy produced with the photovoltaic system in the boiler. The RAPAX 200 and 300 SOL V3 versions can be combined with a forced circulation solar thermal system to further reduce electricity consumption. SILENT OPERATION RAPAX V3 water heaters have a low noise impact making them particularly suitable for installation in inhabited rooms as well. EASY INSTALLATION They can also be installed in unheated rooms such as garages, laundries and closets, and do not require significant masonry work apart from any holes for air ducting in solutions with intake and expulsion of air from the outside. Also supplied, as an option, is a supply kit with DHW expansion tank and safety valve necessary for the installation of this type of appliance. PRACTICAL ADJUSTMENT The RAPAX 100 V2 wall-hung version has a display in the central part of the casing, allowing the installer to place the water heater at the desired height from the ground and providing the user with maximum convenience for setting and viewing the main operating parameters.
€1.560,00
-
Ariston Ariston Nuos Evo A+ 80 Wh Heat Pump Water Heater With 80 Liters Accumulation - New Model
Technical features Product code: 3629056 Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Load profile: M profile Characteristics of heating/DHW operation: Monobloc wall mounted water heater COP air 7°C (EN 16147): 2.55 Heating time @ A7°C (EN 16147) h:min: 5:35 Min/max air temperature °C: -5/42 Sound power db(A): 50 Average absorbed electric power W: 250 Maximum quantity of hot water at 40°C: 85 litres Nominal accumulation capacity lt: 80 Maximum working pressure bar: 8 Maximum absorbed voltage/power V/W: 220-240/1550 Resistance power W: 1200 Standard air flow m3 /h: 100-200 Minimum volume of the installation room m3: 20 Empty mass kg: 50 IP24 electrical protection Insulation thickness mm: 41 Diameter of water connections " 1/2 M Minimum storage room temperature °C: 1 Overall dimensions: see the attached image Nuos Evo 80-110 A+ WH Compact and easy to install, the Nuos Evo A+ heat pump water heater offers great performance and reliability. Ariston's innovation and research have created a water heater capable of using a natural and inexhaustible source of energy: the heat of the air, thus guaranteeing energy efficiency and savings. Nuos Evo is the optimal solution for those with limited spaces and allows you to save at least 70% of energy compared to a traditional electric boiler. The product is so efficient that it reaches energy class A+, the highest energy class that can be declared starting from September 2017. Working range in heat pump with air temperatures from -5 to 42°C / Ecological gas R134A allows to reach water temperatures up to 62°C in heat pump Condenser wrapped around the boiler (not immersed in water) Low noise (silent function) / Boiler in titanium enamelled steel Supplementary electrical resistance Active anode (protech) + magnesium anode LCD display Functions: green, auto, boost, boost 2, hourly programming of voyage and anti-legionella samples Product for internal installation Green function Function that maximizes energy savings. The water heater works exclusively in heat pump mode, heating domestic water up to 62°C. Boost function Function that reduces the heating times of the water heater to a minimum, increasing sanitary comfort. The machine works simultaneously in heat pump and electrical resistance, speeding up the heating of the water. Once the maximum operating temperature of the heat pump has been exceeded, the electrical resistance continues to heat up to the water set-point temperature. Auto mode Function that allows the best compromise between comfort and savings. The machine optimizes the heat pump and resistance activation logic. Anti-legionella function This function provides for automatic disinfection cycles. On a monthly basis, the machine starts a check and, if necessary, heats the sanitary water up to 65°C, keeping it at this temperature until any bacterial proliferation in the tank is destroyed. Hourly programming of withdrawals This is the function that allows you to program times and water temperatures to your liking. The water heater will reach the chosen temperature at the preferred time (up to two times can be programmed): the process will give priority to heating via the heat pump and, only if necessary, will take place via the electric heaters Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€979,00
-
. Fitting For Ivr Multilayer Pipe Size 16 X 2
Fitting for IVR multilayer pipe size 16 x 2 General characteristics Brand: IVR Size: 16x2 Typology: for multilayer pipe
€10,00
-
Ariston Ariston Monoblock Heat Pump Water Heater Nuos Plus 200 Code 3069775 A+ Integrated Wi-Fi
Ariston monoblock heat pump water heater Nuos Plus 200 code 3069775 A+ Integrated Wi-Fi Technical features Product code: 3069775 Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Characteristics of heating/DHW operation: Nominal accumulation capacity 200 l Maximum capacity of hot water at 40°C l 256 Base positioning Thermal dispersion 21 W Seasonal yield (average climate) 130% Min/max air temperature -7/42°C Sound power 55db Maximum working pressure 6 bar Resistance power 1500+1000 W IPX4 electrical protection Minimum volume of the installation room 30m3 Class A+ L profile Dimensions HxWxD: 173.7x60x68 Weight 90kg NEW PLUS WI-FI ARISTON monoblock heat pump water heater Model Monobloc on the floor. The heat pump revolution with new standards of efficiency thanks to the use of the heat in the air as a source of renewable energy to obtain greater comfort and high energy savings. * Access the 65% tax deduction for energy redevelopment interventions. The intervention must be carried out in compliance with the requirements requested by the Revenue Agency for energy requalification interventions. General characteristics: Integrated Wifi for management via APP Compatible with Bus BridgeNet for integration with complex systems. Shortest heat-up time in its category. Working range in heat pump with air temperatures from -5 to 42°C. Water temperature up to 62°C with the heat pump only. Sanitary recycling Active anode (protech) + magnesium anode Internal installation First ignition free. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.360,00
-
ferroli Heat Pump Water Heater Ferroli Egea Lt 200 A+ Integrated Wi-Fi
Heat pump water heater Ferroli EGEA LT 200 A+ Wi-Fi integrated Technical features Product code: 2COBA04F Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Characteristics of heating/DHW operation: Nominal accumulation capacity l 192 Maximum capacity of hot water at 40°C l 273 Accumulation dispersion W 63 Average electrical power absorbed Wel 430 Dimensions (Ø x H) mm 621 x 1607 Nominal air flow m3 /h 350/500 Power supply parameters V-Hz 230V - 50H Protection class IP24 Sound power indoors Lw(A) dB(A) 52 Anti-legionella system AutomaticAnti-corrosion system n. 1 Mg anode Operating modes Auto, Eco, Boost, Elec. Heater, Fan EGEA EGEA is a brand new range of storage heat pump water heaters for the production of domestic hot water, suitable for small residential applications. It is a smart solution for heating sanitary water, which uses electricity, air and possibly solar thermal and photovoltaic energy, leaving out the use of traditional fuels. Efficiency, ecology, flexibility and the new aesthetics are the characteristics that distinguish EGEA and differentiate it from a traditional electric water heater . * The 90 and 120 LT models use R-290 gas, a valid “green” alternative to the most common high GWP (Global Warming Potential) refrigerants in the sector. It is a naturally occurring hydrocarbon (HC) with a GWP of 3 and an ODP (Ozone Depletion Potential) of 0 FEATURES at a glance... EGEA mod. 90 / 120 / 200 / 260 EGEA is an air-water heat pump for the production of domestic hot water, storage in an enamelled steel tank, externally wound condenser for maximum safety and hygiene. > Maximum temperature equal to 62°C obtained from renewable energy with heat pump only or by electric resistance (up to 75°C). > Digital interface with programmable TOUCH keys. > Integration via Solar Thermal (LT-S model) or via Electric Resistance (up to 75°C) on all models. > Integration with the Solar Photovoltaic system. INCENTIVES... when saving is a must. EGEA exploits all the features and technology of air-to-water heat pumps for the production of domestic hot water. Only 25% of the The system's energy requirement comes from electricity. FERROLI is at your disposal for technical and documentary support to take advantage of the incentives provided by the Ministerial Decree 02/16/2016) and subsequent extensions and amendments. ELECTRONICS... easier than that! The EGEA user interface features a very simple and intuitive display. > White backlit LEDs for temperature and function management. > Red backlit LEDs for alarm warnings. > The 4 side TOUCH buttons allow EGEA to be switched on/off ( ); navigation in the MENU ( ) and the increase ( + ) or decrease ( - ) of the setting values. INTEGRATION... EGEA gets along with everyone All versions of EGEA provide for the possibility of using renewable energy supplied by a photovoltaic system (electricity) or by a solar thermal system (thermal energy). The latter solution is possible ONLY for the 200 LT-S and 260 LT-S versions, whose tank houses a dedicated coil as solar exchanger. The use of this auxiliary energy source is activated and set via dedicated commands directly by the user. PHOTOVOLTAIC SYSTEM EGEA is able to manage the surplus Electricity supplied by a Photovoltaic System through the signaling of the Inverter through a clean contact. In this mode, EGEA will prepare domestic hot water at a higher (settable) temperature Set Point than the ECO/AUTO modes, thus allowing you to exploit the free energy available. But for those who want more .. . The EGEA heat pump water heaters have a WiFi module integrated into the product as standard so that they can be connected to the home WiFi network (WiFi router) and therefore be controlled via the APP. By downloading the dedicated EGEA SMART App for free, you can fully manage EGEA at any time Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.850,00
-
Ariston Heat Pump Water Heater Ariston Nuos Primo HC 240 Sys Classe A Gas R-134a 3069655
Heat Pump Water Heater Ariston Nuos Primo HC 240 SYS class A 3069655 Technical features: Type Refrigerant R-134a Minimum storage room temperature 1°C Exchanger surface 0.65m2 Thermal dispersion (PES)* 44W Annual energy consumption (average climate)* 1533 kwh/year Refrigerant charge 900 g Seasonal yield 109% Energy Class A XL load profile Article number 3069655 Heat pump water heater NEW FIRST HC New standards of efficiency thanks to the use of the heat in the air as a source of renewable energy to obtain greater comfort and high energy savings. Furthermore, the system prevents the freezing of the condensed water so that Nuos can operate in heat pump mode even with air at -5°C. Prepared for integration with a solar thermal system. RENEWABLE FUTURE WITH ENERGY EFFICIENCY ITALIAN DESIGN HIGH QUALITY' Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.854,00
-
ferroli Heat Pump Water Heater Ferroli Egea Lt 90 A+ Integrated Wi-Fi
Heat pump water heater Ferroli EGEA LT 90 A+ Wi-Fi integrated Technical features Product code: 2COBA00F Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Characteristics of heating/DHW operation: Nominal accumulation capacity l 89 Maximum capacity of hot water at 40°C l 98 Storage dispersion W 40 Average electrical power absorbed Wel 270 Dimensions (Ø x H) mm 510 x 1380 Nominal air flow m3 /h 190 Required room volume m3 15 Power supply parameters V-Hz 230V - 50H Protection class IP24 Sound power indoors Lw(A) dB(A) 52 Anti-legionella system AutomaticAnti-corrosion system n. 1 Mg anode Operating modes Auto, Eco, Boost, Elec. Heater, Fan EGEA EGEA is a brand new range of storage heat pump water heaters for the production of domestic hot water, suitable for small residential applications. It is a smart solution for heating sanitary water, which uses electricity, air and possibly solar thermal and photovoltaic energy, leaving out the use of traditional fuels. Efficiency, ecology, flexibility and the new aesthetics are the characteristics that distinguish EGEA and differentiate it from a traditional electric water heater . * The 90 and 120 LT models use R-290 gas, a valid “green” alternative to the most common high GWP (Global Warming Potential) refrigerants in the sector. It is a naturally occurring hydrocarbon (HC) with a GWP of 3 and an ODP (Ozone Depletion Potential) of 0 FEATURES at a glance... EGEA mod. 90 / 120 / 200 / 260 EGEA is an air-water heat pump for the production of domestic hot water, storage in an enamelled steel tank, externally wound condenser for maximum safety and hygiene. > Maximum temperature equal to 62°C obtained from renewable energy with heat pump only or by electric resistance (up to 75°C). > Digital interface with programmable TOUCH keys. > Integration via Solar Thermal (LT-S model) or via Electric Resistance (up to 75°C) on all models. > Integration with the Solar Photovoltaic system. INCENTIVES... when saving is a must. EGEA exploits all the features and technology of air-to-water heat pumps for the production of domestic hot water. Only 25% of the The system's energy requirement comes from electricity. FERROLI is at your disposal for technical and documentary support to take advantage of the incentives provided by the Ministerial Decree 02/16/2016) and subsequent extensions and amendments. ELECTRONICS... easier than that! The EGEA user interface features a very simple and intuitive display. > White backlit LEDs for temperature and function management. > Red backlit LEDs for alarm warnings. > The 4 side TOUCH buttons allow EGEA to be switched on/off ( ); navigation in the MENU ( ) and the increase ( + ) or decrease ( - ) of the setting values. INTEGRATION... EGEA gets along with everyone All versions of EGEA provide for the possibility of using renewable energy supplied by a photovoltaic system (electricity) or by a solar thermal system (thermal energy). The latter solution is possible ONLY for the 200 LT-S and 260 LT-S versions, whose tank houses a dedicated coil as solar exchanger. The use of this auxiliary energy source is activated and set via dedicated commands directly by the user. PHOTOVOLTAIC SYSTEM EGEA is able to manage the surplus Electricity supplied by a Photovoltaic System through the signaling of the Inverter through a clean contact. In this mode, EGEA will prepare domestic hot water at a higher (settable) temperature Set Point than the ECO/AUTO modes, thus allowing you to exploit the free energy available. But for those who want more .. . The EGEA heat pump water heaters have a WiFi module integrated into the product as standard so that they can be connected to the home WiFi network (WiFi router) and therefore be controlled via the APP. By downloading the dedicated EGEA SMART App for free, you can fully manage EGEA at any time Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.030,00
-
Haier Haier M5 Heat Pump Water Heater 100 Liters Hp110m5
Water Heater Heat Pump Water Heater Haier M5 100 liters HP110M5 Model M5 monoblock HP110M5 Commercial code 25001027Y Reservoir Wall hanging / Ducted installation Tank volume L 110 Power supply V-Hz 220~240V/50Hz Tank pressure Bar 8 Extra Coil / Exchange Surface No Anti-corrosion Magnesium anode IP protection class IPX4 System data Auxiliary electric resistance power W 1200 Average absorbed power (heat pump only) W 240 Maximum absorbed power (heat pump only) W 350 Maximum absorbed power (with electric resistance) W 1550 Default water temperature °C 55 Water temperature range with resistance °C 35÷75 Water temperature range heat pump only °C 35÷65 Refrigerant / quantity kg R134a / 0.45 Global Warming Potential (GWP) 1430 Sound power dB(A) 50 Operating temperature (heat pump only) min~max °C -7÷45 Operating temperature (system) min~max °C -7÷45 Performance Type of extraction Environment / External COP@7°C (EN16147) 2.71 COP@14°C (EN16147) 3.17 Heating time (@7°C) h 4h58 Heating time (@14°C) h 4h09 Tapping cycle (EN16147) M Power absorbed in standby / Pes (@7°C) W 20 Maximum volume of usable hot water (EN16147) L 102.5 Energy efficiency class (ERP) A+ Dimensions and connections Water outlet " G1/2"M Water inlet / Condensate drain " G1/2"M Safety valve " G1/2"M Ducting hole diameter for air intake/delivery mm Ø 160 Water heater dimensions (LxPxH) mm 492x537x1170 Packing dimensions without pallet (LxPxH) mm 587x587x1247 Net weight kg 51 M5 Haier Monobloc AIR/WATER TREATMENT HEAT PUMP WATER HEATER The Haier heat pump water heater line was born thinking about the energy saving of families. Unlike a traditional water heater, heat pump water heaters provide hot water thanks to the heat present in the air, thus saving on your electricity bill. The electrical energy used by the system is only that necessary for the operation of the compressor and the fan. The electric heaters are inserted only if really necessary or if requested by the user (BOOST mode) Heat pump water heater: how does it work? To understand how a heat pump works, it is sufficient to think of how a refrigerator works: it transfers the heat present inside it to the surrounding environment. The Haier water heater reverses the cycle, extracting heat from the air and transferring it to the water. It is possible to channel the incoming and outgoing air outside to exploit the heat present outside Features Haier heat pump water heater The Haier heat pump water heater is designed to offer the best possible experience and maximum savings thanks to: backward curved fan, reduces noise and energy consumption coil at the bottom of the tank, ensures more hot water anti-legionella function, automatically heats the water to 65°C, every seven days, to destroy any bacteria that may form in the tank load shedding control, allows you to stop the operation of the unit in periods programmed by the user The tank of the Haier heat pump water heater The Haier heat pump water heater tank is built with quality materials and components, which ensure excellent thermal insulation and protect the tank from electrochemical corrosion favored by the water, ensuring its correct operation over the years. The tank is also subjected to impulse tests, to ensure a wide range of operating pressure.
€1.120,00
-
Ariston Nuos Split Inverter Wi Fi 200 Wh Heat Pump Water Heater With 200 Lt Accumulation Class A+
HEAT PUMP WATER HEATER NUOS SPLIT INVERTER WI FI 200 WH WITH ACCUMULATION OF 200 LT class A THIS PRODUCT IS AVAILABLE ON ORDER IN 10 WORKING DAYS !! COP* 3.62 Min/max air temperature -10/42 Sound Power (IU) **** 15 Sound Power (EU) **** 56 Nominal accumulation capacity l 200 Maximum working pressure 6 bar Diameter of water connections " 3/4 M Annual energy consumption (average climate)*** kWh/year 761 OUTDOOR UNIT Coolant connections diameter 1/4 - 3/8 with flare Standard air flow m3 /h 1300 Degree of protection IP24 Refrigerant circuit max pressure (low pressure side) bar 12 Refrigerant circuit max pressure (high pressure side) bar 27 Minimum distance between storage tank and outdoor unit m 2 Energy class A+ Load profile L NEW SPLIT WH WIFI Split heat pump with tank for internal wall installation. The outdoor unit has been designed in such a way as to reduce noise to a minimum, it also features DC inverter technology which allows for better modulation of the power supplied and therefore lower consumption. Thanks also to the Aqua Ariston NET app, through which it is possible to remotely control the product, program temperatures and times of use and monitor energy consumption, this energy class A+ product guarantees comfort and savings using a renewable energy source. Working range in heat pump with air temperature from -10 to 42°C Outdoor unit with DC Inverter technology Integrated Wi-Fi as standard for remote control Ecological gas R134a allows to reach water temperatures up to 62°C in heat pump Condenser wound to the boiler Low noise (outdoor unit) Titanium enamelled steel boiler Electric resistance in steatite with double power Active anode (protech) + magnesium anode Touch-screen LCD Functions: i-Memory, Green, Boost, Fast, Comfort, Programming, Holiday, Anti-legionella, Silence, HC-HP, Shower Ready Photovoltaic function Tank for internal installation First ignition free AQUA ARISTON NET The Aqua Ariston Net app allows you to control the product and monitor energy consumption conveniently even remotely Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.960,00
-
Ariston Ariston Nuos Split 110 Wh Heat Pump Water Heater With 110 Liters Storage Class A
Technical features Product code: 3623243 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Monobloc wall mounted water heater COP air 7°C* 2.03 Heating time* h:min 4:28 Min/max air temperature °C -5/42 Sound power (IU) db(A) 15 Sound power (EU) dB(A) 57 Average absorbed electrical power W 510 Maximum quantity of hot water at 40°C* l 139 Nominal accumulation capacity lt: 110 Maximum working pressure bar 8 Maximum absorbed voltage/power V/W 220-240/1950 Empty mass (IU) kg 38 IP24 electrical protection Insulation thickness mm 41 Diameter of water connections " 1/2 M Minimum storage room temperature °C 1 Thermal dispersions (Pes)* W 24 Outdoor unit: Coolant connections diameter 1/4 - 3/8 with flare Empty mass (EU) kg 27 Standard air flow m3 /h 1100 Refrigerant circuit max pressure (low pressure side) bar 12 Refrigerant circuit max pressure (high pressure side) bar 27 IPX4 degree of protection Maximum distance between storage tank and outdoor unit m 8 Maximum height difference between storage tank and outdoor unit m 3 Maximum height difference between storage tank and outdoor unit m 3 For more information CLICK HERE General characteristics Nuos SPLIT 80-110 WH The Nuos Split water heater is a guarantee of comfort even in the smallest spaces. It stands out for its high energy saving capacity, since it allows you to consume 70% less energy than traditional water heaters . Super compact and silent, it is easy to install and easily transported. Thanks to the technology with which it is equipped, it allows you to easily program five different modes of use, to always have maximum comfort and hot water in large quantities. Working range of the Nuos Split in heat pump with air temperatures from - 5 to 42°C. Ecological gas R134A allows to reach water temperatures up to 62°C in heat pump. Condenser wrapped around the boiler (not immersed in water) Low noise (outdoor unit) Titanium enamelled steel boiler Supplementary electrical resistance Active anode (ProTech) + magnesium anode LCD display Functions: green, boost, boost 2, auto, hourly programming of voyage and anti-legionella samples. Green function Function that maximizes energy savings. The water heater works exclusively in heat pump mode, heating domestic water up to 62°C Boost function Function that reduces the heating times of the water heater to a minimum, increasing sanitary comfort. The machine works simultaneously in heat pump and electrical resistance, speeding up the heating of the water. Once the maximum operating temperature of the heat pump has been exceeded, the electrical resistance continues to heat up to the water set-point temperature. Auto mode Function that allows the best compromise between comfort and savings. The machine optimizes the heat pump and resistance activation logic. Anti-legionella function This function provides for automatic disinfection cycles. On a monthly basis, the machine starts a check and, if necessary, heats the sanitary water up to 65°C, keeping it at this temperature until any bacterial proliferation in the tank is destroyed. Hourly scheduling of withdrawals This is the function that allows you to program times and water temperatures to your liking. The water heater will reach the pre-set temperature at the preferred time (up to two times can be programmed): the process will give priority to heating via the heat pump and, only if necessary, will take place via the electric heaters. Nuos Range: Heat pump water heater Ariston presents NUOS: the widest and most complete range of ecological heat pump water heaters on the market, with high efficiency and energy saving. Ariston has long since chosen the path of ecology and for this reason has been investing for years now in the most advanced technology existing in the sector. The new NUOS heat pump water heaters were therefore born from research: efficient and capable of heating a large quantity of water using very little electricity, as they absorb the heat directly from the outside air. The NUOS range of heat pump water heaters is available in both monobloc and split versions (i.e. with outdoor unit), which can be installed on the wall or on the floor and with capacities ranging from 80 to 300 litres. In new buildings the NUOS range can also be used as an alternative to solar thermal as a source of renewable energy. Heat pump technology The NUOS range uses a thermodynamic cycle to heat the water contained in the storage tank through the air sucked in by the heating unit, reversing the natural flow of heat. A refrigerant fluid (R134A), through changes of state and compression and expansion cycles, takes the heat contained in the air at a lower temperature and transfers it to the sanitary water at a higher temperature. This mechanism is the reverse of the one used in refrigerators. The electrical energy required by the product is only that necessary to operate the fan which captures the air and the compressor which circulates the refrigerant fluid in the circuit. As required by national law, in new buildings it is necessary to satisfy at least 50% of the energy requirement used to heat sanitary water with renewable sources. (Legislative Decree n. 28 of 3 March 2011 based on the RES directive 2009/28/CE). The technology used in NUOS heat pump water heaters is an ideal choice to satisfy these legal obligations, representing an advantageous alternative to solar thermal . It is a valid answer even where there are installation limits due to a building that is not well exposed to the sun. IRPEF tax relief The search for thermal efficiency that distinguishes the NUOS range, as well as allowing immediate savings in terms of low consumption, allows our customers to have the possibility of tax deductions. For more information CLICK HERE Thermal Energy Account As an alternative to tax breaks, again in the event of replacing an electric water heater, the end user can request the incentive provided for by the Thermal Energy Bill, as a capital contribution. The incentive is paid by the GSE (Energy Services Manager) through bank transfer and corresponds to 40% of the expenses incurred for the purchase and expenses related to the installation, up to a maximum of € 400 in a single solution for the replacement of an electric water heater with a heat pump one with a capacity of up to 150 litres; for capacities exceeding 150 liters the refund is in one year if the value of the incentive is less than €600, in two years if it is greater than €600 (the maximum value of the incentive is €700). For more information CLICK HERE Economic saving Considering the profiles of European regulatory requirements, it has been estimated that the annual energy consumption dedicated to the production of domestic hot water of a family of 3 is equal to 1,550 kWh /year. Affordable investment An efficient product consumes less; it follows that, compared to an electric water heater of the same volume, there is an energy saving ed cheap up to 75%. NUOS is therefore an ideal investment that generally pays for itself in about 3 years. Furthermore, for those who take advantage of the tax breaks, the recovery times of the investment are considerably reduced. Energy saving The air is full of heat, a free and renewable energy that comes from the heating of the sun. NUOS manages to extract clean energy from the air and uses it to heat water while consuming only 30% of the electricity required compared to a traditional water heater. It has been estimated that the installation of a NUOS 80 heat pump water heater allows a reduction of 480 kg/year of CO2 linked to the electricity production processes. The same effect would be obtained by the absorption of CO2 by 40 trees. Renewable energy The great innovations are often hidden in what surrounds us on a daily basis. The air, for example, is full of heat, a free and renewable energy that comes from the heating of the sun. NUOS manages to extract clean energy from the air and use it to heat water. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date
€1.169,00
-
Ariston Ariston Nuos Primo Hc 200 Heat Pump Water Heater Energy Class A Code 3069653
Ariston Nuos Primo 200 heat pump water heater energy class A code 3623238 Technical features Product code: 3069653 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: L profile Characteristics of heating/DHW operation: COP* 2.85 Heating time** h:min 6.19 Min/max air temperature °C -5/42 Max water temperature heat pump only/with R °C 55/75 Sound power *** dB(A) 53 Average absorbed electric power W 500 Nominal accumulation capacity l 200 Maximum working pressure 6 bar Maximum absorbed voltage/power V/W 220-230/2750 2 Resistance power W 2000 Standard air flow m3/h 400 Minimum volume of the installation room** m3 20 Empty weight kg 87 IP24 electrical protection Insulation thickness mm 31 Diameter of water connections " 3/4 M Minimum storage room temperature °C 1 Thermal dispersions (Pes)* W 28 Available static pressure Pa 55 Annual energy consumption (average climate)* kWh/year 912 Seasonal yield* % 112.3 V40 (quantity of water mixed at 40°C)* l 247 Dimensions mm HxWxD 1706x584x614 Nuos Primo HC Working range in heat pump with air temperatures from -5 to 42 °C R134a ecological gas allows water temperatures to be reached up to 62 °C in heat pump mode Condenser wrapped around the boiler (not immersed in water) Titanium enamelled steel boiler Immersed electric resistance Active anode (protech) + magnesium anode LCD display Functions: green, auto, boost, hourly programming of withdrawals and anti-legionella Coil and probe holder for solar or boiler integration (NUOS PRIMO HC 240 SYS) Integrated carrying straps Product for internal installation First ignition free Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.706,00
-
Ariston Ariston Nuos Primo 80 Class A Heat Pump Water Heater Code 3623238 Accumulation 80 Liters
Heat pump water heater Ariston Nuos Primo 80 class A code 3623238 accumulation 80 liters Technical features Product code: 3623238 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: COP* 2.32 Heating time* h:min 5:20 Min/max air temperature °C 10/40 Max water temperature heat pump only/with R °C 55/75 Sound power *** dB(A) 54 Average absorbed electrical power W 250 Nominal accumulation capacity l 80 Maximum working pressure bar 8 Maximum absorbed voltage/power V/W 220-240/1550 Resistance power W 1200 Standard air flow m3/h 170 Minimum volume of the installation room** m3 20 Empty weight kg 45 IP24 electrical protection Insulation thickness mm 31 Diameter of water connections " 1/2M Minimum storage room temperature °C 1 Thermal dispersions (Pes)* W 17 Available static pressure Pa 65 Annual energy consumption (average climate)* kWh/year 533 Seasonal yield* % 96 V40 (quantity of water mixed at 40°C)* l 91 New Primo An advanced efficient and sustainable solution. It uses the heat from the air as a renewable energy source to obtain the greatest comfort and savings. Working range in heat pump with air temperatures from 10 to 40°C Ambient air product Ecological gas R134a allows to reach water temperatures up to 55°C in heat pump Condenser wrapped around the boiler (not immersed in water) Titanium enamelled steel boiler Supplementary electrical resistance Magnesium anti-corrosion anode LED displays Functions: green, boost, auto, hourly programming of withdrawals and anti-legionella Product for internal installation Excellent for a family of 3-5 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.057,00
You have seen 96 out of 104 products