icon Heat pump water heaters | CaldaieMurali

Heat pump water heaters

Heat water efficiently and ecologically thanks to heat pump water heaters. Energy saving, reliable performance. Choose from our range of heat pump water heaters for a sustainable and cost effective option for your bathroom. Buy today and enjoy hot water efficiently!

6 products


  • immagine-1-haier-scaldabagno-scaldacqua-a-pompa-di-calore-haier-m5-100-litri-hp110m5

    Haier Haier M5 Heat Pump Water Heater 100 Liters Hp110m5

    Water Heater Heat Pump Water Heater Haier M5 100 liters HP110M5 Model M5 monoblock HP110M5 Commercial code 25001027Y Reservoir Wall hanging / Ducted installation Tank volume L 110 Power supply V-Hz 220~240V/50Hz Tank pressure Bar 8 Extra Coil / Exchange Surface No Anti-corrosion Magnesium anode IP protection class IPX4 System data Auxiliary electric resistance power W 1200 Average absorbed power (heat pump only) W 240 Maximum absorbed power (heat pump only) W 350 Maximum absorbed power (with electric resistance) W 1550 Default water temperature °C 55 Water temperature range with resistance °C 35÷75 Water temperature range heat pump only °C 35÷65 Refrigerant / quantity kg R134a / 0.45 Global Warming Potential (GWP) 1430 Sound power dB(A) 50 Operating temperature (heat pump only) min~max °C -7÷45 Operating temperature (system) min~max °C -7÷45 Performance Type of extraction Environment / External COP@7°C (EN16147) 2.71 COP@14°C (EN16147) 3.17 Heating time (@7°C) h 4h58 Heating time (@14°C) h 4h09 Tapping cycle (EN16147) M Power absorbed in standby / Pes (@7°C) W 20 Maximum volume of usable hot water (EN16147) L 102.5 Energy efficiency class (ERP) A+ Dimensions and connections Water outlet " G1/2"M Water inlet / Condensate drain " G1/2"M Safety valve " G1/2"M Ducting hole diameter for air intake/delivery mm Ø 160 Water heater dimensions (LxPxH) mm 492x537x1170 Packing dimensions without pallet (LxPxH) mm 587x587x1247 Net weight kg 51 M5 Haier Monobloc AIR/WATER TREATMENT HEAT PUMP WATER HEATER The Haier heat pump water heater line was born thinking about the energy saving of families. Unlike a traditional water heater, heat pump water heaters provide hot water thanks to the heat present in the air, thus saving on your electricity bill. The electrical energy used by the system is only that necessary for the operation of the compressor and the fan. The electric heaters are inserted only if really necessary or if requested by the user (BOOST mode) Heat pump water heater: how does it work? To understand how a heat pump works, it is sufficient to think of how a refrigerator works: it transfers the heat present inside it to the surrounding environment. The Haier water heater reverses the cycle, extracting heat from the air and transferring it to the water. It is possible to channel the incoming and outgoing air outside to exploit the heat present outside Features Haier heat pump water heater The Haier heat pump water heater is designed to offer the best possible experience and maximum savings thanks to: backward curved fan, reduces noise and energy consumption coil at the bottom of the tank, ensures more hot water anti-legionella function, automatically heats the water to 65°C, every seven days, to destroy any bacteria that may form in the tank load shedding control, allows you to stop the operation of the unit in periods programmed by the user The tank of the Haier heat pump water heater The Haier heat pump water heater tank is built with quality materials and components, which ensure excellent thermal insulation and protect the tank from electrochemical corrosion favored by the water, ensuring its correct operation over the years. The tank is also subjected to impulse tests, to ensure a wide range of operating pressure.

    €1.120,00

  • immagine-1-immergas-scaldabagno-a-pompa-di-calore-immergas-rapax-100-v2-100-litri-3.028366

    IMMERGAS Immergas Rapax 100 V2 Heat Pump Water Heater 100 Liters 3.028366

    Heat Pump Water Heater Immergas RAPAX 100 V2 100 liters 3.028366 Code 3.028366 Storage capacity (litres) 100 Rated power kW 0.96 Dimensions (HxWxD) mm 1209 x 522 x 538 R134A fluid COP T amb. 15°C 2.75 COP T amb. 7°C 2.47 RAPAX extension RAPAX V3 water heaters can completely eliminate the consumption of gas to heat domestic water because they use the same principle as heat pumps. They are one of the new, effective Immergas solutions for making the best use of renewable energy sources. Floor-standing versions are available with 270-litre (RAPAX 300 V3) vitrified steel storage tank, or 200-litre (RAPAX 200 V3) storage tank and a wall-mounted version with 100-litre vitrified steel storage tank (RAPAX 100 V2). RAPAX 300 V3 is particularly suitable for renovating and building heating systems in villas or single houses when it is necessary to cover 50% of domestic hot water consumption with renewable energy sources. RAPAX 100 V2 was created to complete the offer of systems both for new homes, especially condominiums, and for the replacement of existing gas or electric water heaters. The entire range represents an excellent alternative to solar; can be used in systems built to operate without gas for the production of domestic hot water and in combination with a heat pump, for to air condition. All RAPAX V3 water heaters are equipped with specific predispositions to make the most of the photovoltaic system and, in the RAPAX 200/300 SOL V3 versions, the combination with solar thermal systems. REDUCED CONSUMPTION AND RESPECT FOR THE ENVIRONMENT The RAPAX V3 series greatly reduces polluting emissions compared to a traditional gas water heater. Thanks to the heat pump, it uses the heat in the air as a source of renewable and free energy to heat the water with improved COPs. Furthermore, through an electrical predisposition, it can accumulate the excess energy produced with the photovoltaic system in the boiler. The RAPAX 200 and 300 SOL V3 versions can be combined with a forced circulation solar thermal system to further reduce electricity consumption. SILENT OPERATION RAPAX V3 water heaters have a low noise impact making them particularly suitable for installation in inhabited rooms as well. EASY INSTALLATION They can also be installed in unheated rooms such as garages, laundries and closets, and do not require significant masonry work apart from any holes for air ducting in solutions with intake and expulsion of air from the outside. Also supplied, as an option, is a supply kit with DHW expansion tank and safety valve necessary for the installation of this type of appliance. PRACTICAL ADJUSTMENT The RAPAX 100 V2 wall-hung version has a display in the central part of the casing, allowing the installer to place the water heater at the desired height from the ground and providing the user with maximum convenience for setting and viewing the main operating parameters.

    €1.551,00

  • immagine-1-vaillant-scaldacqua-in-pompa-di-calore-vaillant-arostor-b-1005-da-100-litri-0010026813-gas-r290-installazione-murale

    VAILLANT Water Heater In Heat Pump Vaillant Arostor B 100/5 From 100 Liters 0010026813 Gas R290 Wall Installation

    Technical features Model : aroSTOR VWL B 100/5 Product code: 0010026813 Volume: 100 litres Installation : Mural Energy efficiency COP (A7/W52) : 2.6 COP (A14/W55) : 2.66 Performance Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant: R290 Air inlet connection: 125 mm Air outlet connection: 80 mm Protection Class: IPX4 Operating range: -7° to 35°C Domestic hot water temperature: from 30° to 55°C Maximum temperature of domestic hot water pdc + resistance: 65°C Sound power : 45 dB(A) Sound pressure: 36 dB(A) Maximum electrical power absorbed by heat pump + resistance: 1600 W Kettle material: Enamelled steel Insulation type: PU foam Thickness: 50 mm Dimensions and weight Dimensions (HxWxD): 1287x525x543 mm Empty weight: 47.0 Kg Full weight: 147.0 Kg Vaillant aroSTOR heat pump water heater wall mounted The perfect solution for apartments aroSTOR, the new frontier of water heaters: ecological, convenient and silent. Particularly suitable for replacing old electric water heaters or for installation in newly built apartments, aroSTOR heat pump water heaters are ideal for those who choose an electric solution with savings and environmental protection in mind. Eco-friendly water heating for all your needs Whether you are modernising a single-family home or building a new one, with our new aroSTOR heat pump water heater, you can use air as a renewable heat source for an eco-friendly and efficient hot water supply. aroSTOR is available in a 200 and 270 litre floor-standing version or an 80 and 100 litre wall-mounted version. The floor-standing models are equipped with a low-maintenance stainless steel boiler and are suitable for the hot water needs of up to 5 people. Built for tomorrow's climate needs Thanks to the new natural refrigerant R290, choosing aroSTOR is a safe investment, as it is built to meet the most stringent future standards of the European F-gas regulation for climate protection. Enjoy maximum comfort with a clear conscience at all times. Efficient, silent and reliable With the aroSTOR hot water heat pump, you can convert 1 kWh of electrical energy into over 3 kWh of thermal energy for heating water. A glance at the efficiency label confirms this: with its energy efficiency class A+, the aroSTOR stands up to any comparison. The same goes for its quiet operation: with a maximum sound pressure level of 41 db(A) at a distance of one meter, the aroSTOR is quieter than a modern refrigerator and can therefore be installed in your living space without any problems. Perfect combination with photovoltaic energy aroSTOR can be easily combined with a photovoltaic system. This gives you the advantage of being able to use the electricity generated by your system all year round. As soon as the sun provides enough energy, the energy manager of the photovoltaic system activates aroSTOR. The result: with aroSTOR, you not only reduce your CO 2 footprint, but also your energy costs. First ignition free First start-up of the system and free warranty validation with the official Vaillant technical assistance centres. aroSTOR wall installation New natural refrigerant gas R290 Concentric air supply / exhaust accessory Boost function for fast charging Silent operation max 36 dB(A) at 1 meter Kettle guaranteed for 5 years Auxiliary electric resistance 1.2 kW Inlet air temperature range -7°C / +35°C Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

    €1.785,00

  • Sale -17% immagine-1-oneclima-scaldacqua-a-pompa-di-calore-oneclima-aquathermica-compact-100-litri-305766-gas-r513a

    OneClima OneClima AQUATHERMICA COMPACT 100 Litre Heat Pump Water Heater 305766 Gas R513A

    Technical features Model : AquaThermica Compact 100 Product code : 305766 Energy efficiency Energy efficiency class: A++ Load profile : M Annual energy consumption: 429.3 kWh Performance Nominal thermal power A20/W55: 0.93 kW Nominal thermal power A14/W55: 0.79 kW Nominal thermal power A7/W55: 0.67 kW Maximum setting temperature: 60° C Heating time in Boost mode with electric resistance: 2:37 h Maximum volume of mixed water at 40°C: 135 litres Maximum absorbed power: 1.83 kW Electric resistance power: 1.5 kW Tank capacity: 98 litres Nominal air flow rate: 235 m3 /h External sound power level: 58 dB(A) Internal sound power level: 50 dB(A) Maximum operating pressure: 8 bar Degree of protection: IPX4 Corrosion protection: Magnesium anode Ø32x270 mm Electrical data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R513A Operating range : - PDC aspirated : 5° ~ 43° C - Installed in environment: 4° ~ 40° C AQUATHERMICA COMPACT OneClima Wall-mounted heat pump water heater for domestic hot water Renewable Energy Energy efficiency class A+ Energy savings up to 75% Low CO2 emissions Electronic valve for better performance Temperature range from -5°C to +43°C 60°C only with PDC Ecological refrigerant gas LED display Product Warranty : The warranty on this item is 24 months from the date of purchase

    €1.848,00€1.540,00

  • immagine-1-ariston-scaldabagno-a-pompa-di-calore-elettrico-ariston-lydos-hybrid-100-eu-con-tecnologia-ibrida-cod.-3629053-new-erp-ean-5414849701137

    Ariston Ariston Lydos Hybrid 100 EU Electric Heat Pump Water Heater with hybrid technology cod. 3629053 - NEW ErP

    Ariston Lydos Hybrid 100 EU Electric Heat Pump Water Heater with hybrid technology Product code: 3629052 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Capacity l 100 Power kW 1.2 Average absorbed electrical power kW 0.19 Electric power absorbed max kW 1,42 Voltage V 220-240 i-Memory heating time (ΔT=43°C) h,min 7.03 Boost heating time (ΔT=43°C) h,min 3.13 Green heating time (ΔT=43°C) h,min 12.18 Maximum working pressure 8.0 bar Min/max air temperature °C 12/40 Sound power 49 dB Height 1153mm Weight kg 37.5 IP protection X4 Lydos Hybrid   Hybrid Intelligence. The innovative i-Memory software learns your habits to efficiently manage hybrid technology, choosing the most convenient option between using energy from the heat pump and electricity. After an initial learning phase, the i-Memory is able to program the water temperature every hour, so as to meet the user's needs while saving time and energy. Superior Performance. Thanks to Hybrid Intelligence and i-Memory, hot water is always available when needed. The BOOST function speeds up the production of hot water and the Shower Ready icon notifies you when the first shower is ready. Simple installation . Designed to be as easy to install as any electric water heater No additional work is required thanks to compatibility with the supports and water connections of standard Ariston electric water heaters The hydraulic connections are completely hidden inside the product itself Italian style and intuitive design thanks to the advanced hi-tech interface.  Thanks to the combination of innovative technologies, Ariston has created the first medium-capacity electric water heater able to reach such high levels of efficiency as to be included in energy class A. Efficiency means greater economic savings, comfort and lower carbon dioxide emissions. Functions: i-MEMORY: Chooses the best compromise between comfort and efficiency based on user habits. The temperature and the amount of hot water are set on the basis of the energy consumption in the last four weeks. Managing the operation of the heating element and the heat pump is therefore an improvement process. Green Achieves maximum efficiency using 100% of the heat pump. The maximum temperature that can be reached is 53°C and cannot be increased. The electric resistance is activated only with Anti-legionella, or in the event of a malfunction of the heat pump. boost Temporarily increases the electric power of the product, in case of need for hot water within a short time. The resistance and the heat pump work together up to 53°C, after which the temperature is regulated only by the resistance. When the desired temperature is reached, the Boost function deactivates. Program Desired time and temperature program to optimize consumption thanks to hybrid technology. Allows the user to choose two different temperatures at two different times. Operation is in heat pump or, if necessary, in resistance. Lydos Hybrid At a Glance: First electric water heater with class A hybrid technology 50% savings compared to a class B water heater i-Memory, Program, Green and Boost function Active anode + magnesium Enamelled resistance in Incoloy nickel alloy for anti-noise and anti-corrosion Replacement of old water heaters Ease of installation Hidden hydraulic connections Condensate collection tray available as an accessory

    €625,00

  • immagine-1-ariston-scaldabagno-a-pompa-di-calore-ariston-nuos-primo-100-classe-a-codice-3623239-accumulo-100-litri

    Ariston Ariston Nuos Primo 100 Class A Heat Pump Water Heater Code 3623239 Accumulation 100 Liters

    Heat pump water heater Ariston Nuos Primo 100 class A code 3623239 accumulation 100 liters Technical features Product code: 3623239 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: COP* 2.17 Heating time* h:min 6:36 Min/max air temperature °C 10/40 Max water temperature heat pump only/with R °C 55/75 Sound power *** dB(A) 54 Average absorbed electrical power W 250 Nominal accumulation capacity l 100 Maximum working pressure bar 8 Maximum absorbed voltage/power V/W 220-240/1550 Resistance power W 1200 Standard air flow m3/h 170 Minimum volume of the installation room** m3 20 Empty weight kg 49 IP24 electrical protection Insulation thickness mm 31 Diameter of water connections " 1/2M Minimum storage room temperature °C 1 Thermal dispersions (Pes)* W 20 Available static pressure Pa 65 Annual energy consumption (average climate)* kWh/year 567 Seasonal yield* % 91 V40 (quantity of water mixed at 40°C)* l 117 New Primo  An advanced efficient and sustainable solution. It uses the heat from the air as a renewable energy source to obtain the greatest comfort and savings. Working range in heat pump with air temperatures from 10 to 40°C Ambient air product Ecological gas R134a allows to reach water temperatures up to 55°C in heat pump Condenser wrapped around the boiler (not immersed in water) Titanium enamelled steel boiler Supplementary electrical resistance Magnesium anti-corrosion anode LED displays Functions: green, boost, auto, hourly programming of withdrawals and anti-legionella Product for internal installation Excellent for a family of 3-5 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €1.150,00

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account