SINGLE DIAPHRAGM DESIGNPATENTED HYDRAULIC FITTING AND MADE FROM STAINLESS STEELGENUINE POLYPROPYLENE LINING THEY ARE SUITABLE FOR A WIDE RANGE OF APPLICATIONS SUCH AS BOOSTERING, THERMAL EXPANSION, IRRIGATION AND WATER HAMMER SYSTEMS. WITH FIXED MEMBRANE. TRANSPORT COSTS MAY VARY ACCORDING TO THE DESTINATION AND THE VOLUME OF THE GOODS

Read more less

ATTENTION The product will be available on order and will be shipped in 10 working days! Technical features Product code : DIVER 100 T-NA Power supply : 3x400V~ 50Hz Power : 0.75 kW (1 HP) Diameter : 127mm Operating range: from 0.6 to 12 m3 /h with head up to 96 metres Pumped liquid: Clean, without solid or abrasive bodies, non-aggressive Maximum presence of sand in the water: 50gr/ m3 Liquid Temperature Range : from 0°C to +35°C Maximum immersion : 20 metres Delivery port diameter: 1" 1/4 Gas Power Tolerance : +6% / -10% Maximum number of starts: 20/h Motor Protection Degree: IP 68 Engine Protection Class : F Installation : In wells, tanks and cisterns, in vertical position Special Executions on Request: Other voltages and/or frequencies. Automatic version with float. Applications DIVER electric pumps are used in systems for lifting clear water from wells, first collection tanks or cisterns, Roman wells or streams and are suitable for the distribution of pressurized water in domestic systems, small agriculture, sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all the problems related to suction and deactivation Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor which is cooled by the pumped liquid. Impellers and diffusers in Noryl reinforced with glass fiber with wear-resistant wear ring in stainless steel. Outer jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Motor side lip seal and silicon carbide/silicon carbide mechanical seal on pump side Construction Characteristics of the Engine • Submersible two-pole asynchronous type built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L • Squirrel cage rotor mounted on ball bearings, and oversized to guarantee silence, reliability and durability • On request, the single-phase version is supplied with the CONTROL BOX • Protection by the user for the three-phase version • Automatic version with float available • Version with support base and side suction (DRY) available on request Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara submersible multistage centrifugal electric pump with stainless steel body IDROGO M 40/10 A 1582051221 with float General characteristics Brand: Ebara Code: 1582051221 Model: IDROGO M 40/10 A Float: Yes Typology: Single-phase Data sheet Description Applications: handling of clear water from wells, cisterns and initial collection tanks; pressurization of domestic systems; small watering; Installation: in horizontal and vertical position Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara submersible multistage centrifugal electric pump with stainless steel body IDROGO T 80/20 1592080004 General characteristics Brand: Ebara Code: 1592080004 Model: IDROGO T 80/20 Float: No Typology: Three-phase Data sheet Description Applications: handling of clear water from wells, cisterns and initial collection tanks; pressurization of domestic systems; small watering; Installation: in horizontal and vertical position Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Lowara Code: GMD 20 RA/5HM06P15T Data sheet Meaning of the product code: GMD 20: Fixed speed group (three-phase) RA: With inlet side check valve 5HM06P15T: Electric pump code Number of electric pumps: 2 Nominal power expressed in kilowatts: 1.5 kW Rated power expressed in horse power: 2 hp Technical specifications for a single electric pump Other characteristics Booster set version: RA (for applications with air cushion autoclaves). Main components Main shut-off valves located on the suction and delivery sides of each pump, ball type with threaded connection. Check valve on the discharge side of each pump of the spring-loaded type with threaded connection. For applications with air-cushion autoclaves, they are mounted on the suction side and the group is provided with an air feeder connection for a G 1/2“ threaded hose (GMD20..RA series). AISI 304 stainless steel intake manifold with threaded ends. Threaded connection for water loading. Delivery manifold in AISI 304 stainless steel with threaded ends. It has R1" threaded connections with relative caps for connecting any 24 or 20 liter membrane vessels. Pressure gauge and 2 pressure switches Pressure gauge and 2 control pressure switches located on the delivery side of the unit. Various fittings in nickel-plated brass, galvanized steel or stainless steel depending on the version. Support base for pump unit and switchboard bracket in galvanized steel. Electrical control panel with IP54 degree of protection. Control panel Three-phase power supply electric panel, for the control and protection of, at most, two three-phase electric pumps, with sheet steel case and IP54 degree of protection. Main features: Main door lock switch, fuse holders and fuses, starting contactors and thermal protections such as magnetothermal motor protectors for protection of each motor. Standard power supply voltage: 3x400Vac +/-10%, 50/60Hz. On request non-standard voltages, 3x230ca +/-10%, 3x440ca +/-10%, 3x460ca +/-10%, 3x480ca +/-10%, 50/60Hz. Transformer for low voltage auxiliary circuit; auxiliary voltage 24Vac. Lowara SM20 digital control unit (see fig.2), which offers the following functions: - Signaling LEDs: line presence (ref.1), thermal protection intervention (ref.2), level alarm for lack of water (ref.3), pump running (ref.4). - Buttons (ref.5) and LED for automatic / manual operation (ref.6). - Start, manual stop of pumps (one key for each pump) (ref.7). - Automatic cascade control of the pumps via two pressure switches (one per pump). - Jockey pump management by excluding cyclic inversion. - Cyclic inversion function (can be excluded). It allows the automatic exchange of the pumps at each start/stop cycle. - Automatic, manual or excluded operation selectors for each pump (inside board). To be used only in case of board failure to ensure pump operation. - Prepared for protection against lack of water, alternatively between: float, minimum pressure switch, external contact or electrode probes with sensitivity adjustment. - Adjustable delay timer for the intervention of the protection against lack of water (inside the board); adjustable between 0..30sec. - Adjustable operation extension timer for each pump (inside the board); adjustable between 0..100sec. - Prepared for the installation, inside the switchboard, of a relay card (optional) for relaunching signals for: pump 1, 2 running, manual mode, thermal alarm, water shortage alarm, line presence. Arrangement for connection of enable from external contact or pressure switch for maximum pressure protection.

Read more less

General characteristics Brand: Lowara Model: 3HM04P05M Data sheet Rated power expressed in horse power: 0.66 hp Nominal power expressed in kilowatts: 0.5 kW Absorbed volts: 230 V Suction port: 1" Delivery attack: 1" Pump body composition: AISI 304 stainless steel Impeller composition: Noryl

Read more less

PEDROLLO multi-impeller centrifugal electric pump mod. 4CPM 100 single phase 1 HP SILENT Technical features: Single-phase 230V - 50 Hz motor with thermal overload protector incorporated in the winding Power 0.75kW (1HP) Capacitor capacity 20mF Flow rate: up to 130 l/min (7.8 m³/h) Head: up to 50 m Pump body: cast iron equipped with ISO 228/1 threaded ports. Lid: AISI 304 stainless steel Diffusers: Noryl complete with anti-wear rings Impellers: Noryl Motor shaft: stainless steel Insulation: class F Protection: IP X4 Liquid type: clean water Uses: domestic, civil Uses: water supply, pressure boosting systems, irrigation Typology: surface Family: multi-impellers Liquid temperature from -10 °C up to +40 °C Ambient temperature up to +40 °C Manometric suction height up to 7 m Max pressure in the pump body 6 bar Continuous duty S1 General characteristics: Recommended for the distribution of clean water combined with small or medium autoclave tanks and for the irrigation of orchards and gardens. The installation must be carried out in closed places or in any case protected from bad weather. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: DAB Model: Feka 550 EAN: 8019203946468 Data sheet Electric pump composition: Stainless steel Impeller type: Vortex Motor shaft composition: AISI 316 stainless steel Power cord length: 10 meters Installation type: vertical Possibility of installation: fixed or portable Output Type: Horizontal 2" Float: Yes Description The submersible electric pumps for sewage are designed to empty flooded environments and tanks or containers with dark water and waste. In particular, this article is suitable for lifting sewage and waste water in general, containing solid bodies of maximum dimensions up to 50mm.

Read more less

General characteristics Brand: Dab Model: K55/50M EAN: 8019203002065 Data sheet Rated power expressed in horse power: 2.5 hp Rated power expressed in kilowatts: 1.85 kW Absorbed volts: 230 V Suction port: 1"1/2 Delivery attack: 1" Pump body and motor support composition: Cast iron Impeller composition: Technopolymer Shaft composition: Stainless steel

Read more less

Technical features Product code : DTRON 2 35/90 Power supply : 220~240/50/1 Power : 0.52 kW (0.7 HP) Maximum flow : Up to 100 l/min Maximum head : Up to 36 m Maximum ambient and liquid temperature: 50°C Factory cut-in : 2.4 bar (±0.2) Flanging or delivery thread : Threaded 1" 1/4 Dimensions : 611x185mm New DTron 2 series The evolution of the submerged autoclave 43 years of experience. An unstoppable drive towards innovation. Constant communication with all markets. This is the ecosystem in which DAB products are born and evolve. The new DTron series is proof of this: an important step forward in redefining the characteristics of submersible pumps , made with the security of the market leader DTron 2 and DTron 3 are born from the desire to create a range of "easy" but extremely efficient pumps . Technologically advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories. DTron 2 Together with a series of fully integrated and modular accessories, they represent an offer of solutions for every use in different types of installations. The customized value For Dab it is essential to design solutions according to the real needs of all the players in the sector The new DTron submersible pumps guarantee advantages for installers, distributors and end users by saving them space, time and costs A large, constant and rapid evolution possible only thanks to the attention and listening of our top market experts: you. A Global Listen We move water all over the world, with over 2 million pumps installed every year we are also able to handle special needs. In Australia where nature still has a dominant role in the territory, the functioning of our products is put to the test by insects and small reptiles that infiltrate the pumps to make their den Thanks to this experience DAB has designed the new models of the DTron range making them unassailable by any external agent, solving the case that emerged in Australia and in fact making our solutions even safer in all geographical areas of the world Experiences and Innovation 43 years of experience, an unstoppable drive towards innovation and constant communication with all markets. This is the ecosystem in which DAB products are born and evolve The new DTron series is proof of this: an important step forward in redefining the characteristics of pumps submerged, made with the safety of the market leader DTron 2 was created to create a range of "easy" but extremely efficient pumps. Very advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories Integrated vase A quick and easy installation. A more essential and less bulky system. Greater reliability in time. The expansion vessel improves the pressure tightness of the system, avoiding unnecessary restarts, reducing water hammer and lengthening the life of the pump. With this integrated component, installation times are reduced NFC technology A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. NFC (Near Field Communication) allows the use of pumps with float and level sensor* without the need for any additional wiring. The accessories attach without having to disassemble the pump body. All this guarantees speed and reliability. PLC technology Only for DTron 3 A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. PLC (Power Line Communication) allows the use of the Com Box electronic control device without the need for any physical connection but through the electric power supply line. DConnect With DConnect Box 2 you access the DAB cloud service. The new App allows you to manage and monitor the system pressure, the alarms and the residual availability of water in the tank directly from your smartphone or tablet wherever you are! DTron 3 thus becomes the first submersible pump equipped with a display DOC68 Maximum installation flexibility. The ultimate in waterproofing. The maximum of unassailability. With this accessory and the IP68 certification, DTron pumps can also be installed out of the water, thus transforming submersible pumps into real traditional autoclaves Vent valve Benefits during installation and throughout use. The vent valve allows for immediate priming upon first installation and always guarantees the correct functioning of the pump. Facilitated maintenance Modular and functional construction. Thanks to the modular components of the pump it is possible to make maintenance easier. Elements that can be disassembled, repaired and replaced separately which simplify the management of any problems, reducing maintenance costs. Com Box Only for DTron 3 More comfortable. Smarter. With Com Box you can intervene on the pump pressure parameters and view any alarms. No direct connection to the pump is required (PLC Optional accessories X-Kit for the X version Combined with the X version, it allows the suction of water at a level such as to avoid the pumping of dust and sludge present on the bottom of wells and tanks DOC68 With the DOC68 it is possible to install DTron also outdoors as an IP68 certified surface pump Floating Allows the water level of the tank to be detected, preventing emptying of the same, and the pump to go into blockage, avoiding dry running due to too low a water level Level sensor Only for DTron 3 Connected to the DConnect Box 2, it checks the water level in the tank and communicates it to the user via the App (only on DTron 3) COM Box Only for DTron 3 It allows you to change the start and stop pressure and to check any pump alarms, in an easy and intuitive way DConnect Box 2 Only for DTron 3 Thanks to DConnect Box 2 you can control the pump, set the start and stop parameters, see alarm details and monitor the pressure directly from your smartphone, obtaining the best performance and lightness of maintenance never seen before Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Dab Model: K55/50T EAN: 8019203874594 Data sheet Rated power expressed in horse power: 2.5 hp Rated power expressed in kilowatts: 1.85 kW Absorbed volts: 400 V Suction port: 1"1/2 Delivery attack: 1" Pump body and motor support composition: Cast iron Impeller composition: Technopolymer Shaft composition: Stainless steel

Read more less

SUITABLE FOR THE TRANSFER OF FILTERED LIQUIDS FOR: AGRICULTURE, WINE, BOATING, GARDENING. THE LIQUIDS TO BE TRANSFERRED MUST BE NEUTRAL AND CLEAN, OR CONTAIN A PERCENTAGE OF SOLIDS (0.2-0.5% MAX) HAVING HARDNESS AND GRANULOMETRY CHARACTERISTICS SUCH AS NOT TO WEAR THE INTERNAL SHIFT SURFACES OF THE PUMP. IN EXTREME CASES A NARROW MESH FILTER FITTED TO THE TUBE MAY BE USEFUL

Read more less