Discover our wide selection of pumps and electric pumps to meet all your needs. From irrigation pumps to drainage pumps, we offer high quality, reliable solutions. Choose from a range of wattages and capacities to ensure optimal performance.
Pumps and electric pumps
DAB Peripheral Submersible Electric Pump Dab Idea 150 T 1.5 Hp Three-Phase 99331023
Technical features Product code : IDEA 150 M Power supply : 3 x 400V ~ ~ 50Hz Power : 1 kW (1.5 HP) Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral, close to the characteristics of water Liquid Temperature Range : from 0°C to +35°C Maximum immersion : 20 metres Delivery port diameter: 1" Gas Power Tolerance : +6% / -10% Maximum number of starts: 20/h Installation : in wells of 4" or larger, tanks and cisterns, in vertical position. Special executions on request: other voltages and/or frequencies Motor Protection Degree: IP 68 Insulation class : F Power Cord : H07RN-F detachable, length 15 meters , Nylon Cord, length 15 meters IDEA Peripheral Submersible Electric Pumps 4" Applications Single-impeller (version 75 and 100) or twin-impeller (version 150) submersible peripheral pump for 4" or larger wells, capable of developing high heads for limited power. Suitable for lifting and distributing water in domestic systems, small agriculture, pressurization of autoclave groups and hobby applications Construction features of the pump • Pump body and motor support in cast iron • Impeller in brass • Rotor shaft extension and stainless steel filter Construction Characteristics of the Engine • Submersible two-pole asynchronous type built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L • Squirrel cage rotor mounted on ball bearings, and oversized to ensure reliability and durability • Mechanical seal in graphite/alumina and lip seal • In the single-phase version, the run capacitor is housed in a sturdy, electrically insulated, high-density plastic container • Protection by the user for the three-phase version Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€273,00
-
DAB Dab Jet 251 T Hp 2.5 Three-Phase Self-Priming Centrifugal Electric Pump 99581985
Technical features Model: JET 251 T three-phase Code: 60145849 Power supply: 3 x 230-400V~50Hz Power: 1.85kW (2.5HP) Capacitor capacity: 31.5mF Operating range: from 0.4 to 10.5 m³/h with head up to 62 metres Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 8 bar (800 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal board). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€420,00
-
DAB Dab Jet 151 T Hp 1.5 Three-Phase Self-Priming Centrifugal Electric Pump 99581978
Technical features Model: JET 151 T three-phase Code: 60145787 Power supply: 1 x 230-400V~50Hz Power: 1.1kW (1.5HP) Capacitor capacity: 31.5mF Operating range: from 0.4 to 10.5 m³/h with head up to 62 metres Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 8 bar (800 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal block). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€487,00
-
DAB Dab Feka Vs 1200 T-Na 1.6 Hp Three-Phase Centrifugal Electric Pump In Stainless Steel 99330934
Technical features Product Code : FEKA VS 12000 T-NA Power supply : 3 x 400V ~ 50Hz Power : 1.2 kW (1.6 HP) Operating range: from 0 to 32 m3/h with head up to 14 metres Pumped liquid: sewage and used water in general, however non-aggressive Free Passage: 50 mm Liquid Temperature Range : - from 0°C to +35°C for domestic use, - from 0°C to +50°C for other uses Maximum Ambient Temperature for Operation of the Pump with the Motor Surfaced: +40° C Maximum Immersion Depth : 7 meters Motor Protection Degree: IP 68 Insulation class : F Installation : Fixed or Portable, Vertical FEKA VS Submersible Pumps Applications Submersible centrifugal pump in stainless steel with liquid vortex impeller, in precision cast steel, suitable for lifting sewage water and waste water in general, containing solid bodies with maximum dimensions up to 50 mm Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side Construction Characteristics of the Engine Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 , Max starts/hour: 20. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€805,00
-
DAB Dab Diver 150 T-Na Multistage Submersible Electric Pump 1.5 Hp Three-Phase 99331061
Technical features Product code : DIVER 150 T-NA Power supply : 3x400V~ 50Hz Power : 1 kW (1.5 HP) Diameter : 127mm Operating range: from 0.6 to 12 m3 /h with head up to 96 metres Pumped liquid: Clean, without solid or abrasive bodies, non-aggressive Maximum presence of sand in the water: 50gr/ m3 Liquid Temperature Range : from 0°C to +35°C Maximum immersion : 20 metres Delivery port diameter: 1" 1/4 Gas Power Tolerance : +6% / -10% Maximum number of starts: 20/h Motor Protection Degree: IP 68 Engine Protection Class : F Installation : In wells, tanks and cisterns, in vertical position Special Executions on Request: Other voltages and/or frequencies. Automatic version with float. Applications DIVER electric pumps are used in systems for lifting clear water from wells, first collection tanks or cisterns, Roman wells or streams and are suitable for the distribution of pressurized water in domestic systems, small agriculture, sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all the problems related to suction and deactivation Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor which is cooled by the pumped liquid. Impellers and diffusers in Noryl reinforced with glass fiber with wear-resistant wear ring in stainless steel. Outer jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Motor side lip seal and silicon carbide/silicon carbide mechanical seal on pump side Construction Characteristics of the Engine • Submersible two-pole asynchronous type built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L • Squirrel cage rotor mounted on ball bearings, and oversized to guarantee silence, reliability and durability • On request, the single-phase version is supplied with the CONTROL BOX • Protection by the user for the three-phase version • Automatic version with float available • Version with support base and side suction (DRY) available on request Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€420,00
-
DAB Dab Jet Centrifugal Self-Priming Electric Pump Cast Iron Pump Body - Model Jet 300 T
TECHNICAL DATA Operating range: from 0.4 to 10.5 m3 /h with head up to 62 metres. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41) from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: 8 bar (800 kPa) Installation: fixed in horizontal position. Special executions on request: other frequencies and/or voltages. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltages: single-phase 220/240 V / 50 Hz three-phase 230/400V / 50Hz APPLICATIONS Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Suitable for use with water with small sandy impurities. Particularly used for water supply in domestic systems. Suitable for small-scale agriculture and gardening, limited industrial services and where the self-priming function is required. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump body and motor support in cast iron. Technopolymer impeller, diffuser, venturi tube and sand guard. Double impeller for the JET 151 and 251 version. Stainless steel shim rings. Mechanical seal in carbon/ceramic. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Asynchronous type, closed, cooled by external ventilation. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Built-in thermo-amperometric protection and capacitor permanently inserted in the single-phase version. For the protection of the three-phase motor it is recommended to use a motor protection switch in accordance with current standards. Construction according to CEI 2-3 / CEI 61-69 (EN 60335-2-41) standards. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€507,00
-
DAB Dab Dp Self-Priming Centrifugal Electric Pump For Deep Suction Cast Iron Pump Body - Model Dp 251 T
Technical features Model Self-priming centrifugal electric pump Dab Model DP 251 T Energy efficiency Operating range: up to 4.3 m3/h. Pumped liquid: clean, free from solid or abrasive substances, not viscous, non-aggressive, non-crystallised and chemically neutral, close to the water features. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Installation: fixed in horizontal position. Special executions on request: other voltages and/or frequencies. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220-240V / 50Hz three-phase 230-400V / 50Hz APPLICATIONS Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector (optional) to be introduced in wells of 4" or diameter greater. Used for the water supply of farmhouses and small agriculture. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump: Body and motor support in cast iron. Technopolymer impeller and diffuser. Stainless steel shim ring. Mechanical seal in carbon/ceramic. Ejector: Cast iron body. Venturi tube in technopolymer A and brass nozzle. The ejector is available in three models (E 20 - E 25 - E 30) depending on the performance required. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Rotor mounted on greased-for-life and oversized ball bearings. Built-in thermo-amperometric protection and capacitor permanently inserted in single-phase motors. For the protection of the three-phase motor it is recommended to use a motor protection switch in compliance with the norms. Construction according to CEI 61-69 (EN 60335-2-41) standards. Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector to be introduced in wells of 4” or greater diameter. Used for the water supply of farmhouses and small agriculture. Operating range: up to 4.3 m3/h. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Self-priming: up to 27 metres. Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€395,00
-
Dab Dab Electric Pump For Three-Phase Water Pressurization Model Esybox Max 85/120 T Integrated Wi-Fi 60195100
General characteristics Brand: Dab Code: 60195100 Model: Esybox Max 85/120 T Typology: Three-phase Data sheet Flow rate: Up to 17.4 m3 /h (per single unit) Head: 113 m Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral Liquid temperature: +50°C Maximum ambient temperature: +55°C Maximum inlet pressure: 5 bar Maximum working pressure: 12bar / 1200kPa Constant pressure range: 1-12 bar (3 bar ex factory) Motor protection degree: IP X5 Motor insulation class: F Impeller(s) construction material: Technopolymer Single-phase power supply: 208-240V 50/60Hz Three-phase power supply: 380-480V 50/60Hz Possible type of installation: Fixed, vertical Certifications: WRAS, ACS, NSF61 ( Pending ) Description Integrated pumping system for pressurization in residential, civil and commercial environments. Available in two power sizes, it consists of modular elements that allow different configurations. The system can be housed on single, double or triple connection bases; the double bases can also be combined to obtain a system of four elements. The modular construction allows the pumping groups to be assembled directly on the installation site (OSA concept) The silent operation and compact dimensions allow installation in all environments, even inhabited ones. PUMP CHARACTERISTICS Electronic vertical multi-impeller pump, with display, two pressure sensors (suction and delivery), non-return valve on delivery and integrated expansion. Pump body and impellers in technopolymer with steel jacket. ENGINE FEATURES Water-cooled permanent magnet motor, stainless steel motor jacket. Motor shaft in AISI 303 stainless steel. ELECTRONIC FEATURES The presence of the inverter keeps the pressure constant by varying the number of motor revolutions according to the request. The expansion module (esy I/O, available as an accessory) makes it possible to interface Esybox Max with the other elements of the system (BMS). Integrated protections: protection against dry running, amperometric and abnormal voltages, overtemperature, freezing, anti-blocking and anti-cycling. DCONNECT Thanks to the DConnect app and the integrated wi-fi, it is possible to configure and view the operating parameters on the large Esybox Max display, on the site or remotely with active DConnect service and Internet connection. It is possible to control and manage directly from a smartphone or tablet system pressure, alarms and instantaneous and historic consumption. DSync technology optimizes the user experience of Esybox Max. The installer interfaces with the pump via his smartphone or tablet. it automatically detects the language, time and unit of measure of the place of installation. In case of multiple system, after easy installation is completed of the first pump, the Esybox Max synchronize with each other automatically. DSync allows communication with external systems through the protocol Modbus. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.881,00
-
Ebara Ebara Self-Priming Electric Pump With Three-Phase Cast Iron Body Aga/I 200 T Ie3 1110200004i
Ebara self-priming electric pump with three-phase cast iron body AGA/I 200 T IE3 1110200004I General characteristics Brand: Ebara Code: 1110200004I Model: AGA/I 200 T IE3 Data sheet Rated voltage: 230 / 400V 3ph Rated Power: 2.06kW Rated current: 6.2 / 3.6A Rated Frequency: 50Hz Maximum water temperature: 45°C Protection class: I Degree of protection: IP44 Maximum head: 62.5m Minimum head: 30.5 Description Electric pump applications: domestic pressurization; small irrigation of gardens; vehicle washing; movement of clean water in general. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€406,00
-
Grundfos Grundfos Submersible Single Impeller Three Phase Electric Pump For Sewage Stainless Steel Ap 50b.50.11.3 96004601 Without Shuko Plug And Without Float
Grundfos submersible single-impeller three-phase electric pump for sewage in stainless steel ap 50b.50.11.3 96004601 WITHOUT SHUKO PLUG General characteristics Brand: Grundfos Model: ap 50b.50.11.3 Code: 96004601 Data sheet Max flow rate: 8.06 l/s Max head: 14 m Impeller type: VORTEX Max. Particle: 50mm Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Steel: stainless steel EN 1.4301 AISI 304 Installation Ambient temperature limit: 0 .. 40 °C Connection type: Rp Size attack: 2 inch max. depth of installation: 2 m Inst. dry/submerged room: S Auto Pairing: Y Liquid Liquid temperature range: 0 .. 40 °C Density: 998.2 kg/m³ Electrical data P1 power input: 1.75 kW Rated power - P2 : 1.31 kW Network frequency: 50Hz Rated Voltage: 3 x 400V Rated Current: 2.81A Cos phi - power factor: 0.90 Rated Drive Speed: 2785rpm Capacitor capacity - run: 16 µF/400 V Protection class (IEC 34-5): IP68 Insulation class (IEC 85): F Integrated motor protection: NONE Thermal protection: external Electric cable length: 5 m Cable plug type: NONE Other Net weight: 11.4kg Gross weight: 13.4kg Description Useful to: Wastewater - Commercial buildings Domestic wastewater Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
€1.074,00
-
Ebara Ebara Double Impeller Centrifugal Electric Pump With Three-Phase Cast Iron Body Cda/I 300 T 1210300004i
Ebara double impeller centrifugal electric pump with three-phase C cast iron body da/i 300 T 1210300004I General characteristics Brand: Ebara Code: 1210300004I Model: Cda/i 300 T Typology: three-phase Data sheet Description Application of electric pump: pressurization of electrical systems; small watering handling of non-aggressive liquids for civil and industrial use; washing facilities; vehicle wash. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€431,20
-
Ebara Ebara Submersible Electric Pump For Emptying Sewage And Stainless Steel Body Dw/A 150 T 1589070004a
Ebara submersible electric pump for emptying sewage and stainless steel body DW/A 150 T 1589070004A Data sheet Brand: Ebara Code: 1589070004A Model: DW/A 150 T Data sheet DW: SINGLE-CHANNEL IMPELLER DW VOX: VORTEX IMPELLER Description Applications: evacuation of civil and industrial waste water; draining of wells or excavations; drainage of sub-level areas; general handling of loaded liquids also with solid and filamentary substances in suspension; emptying of seepage water; handling of sewage waste water (sanitary services); emptying of cesspools. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€677,60
You have seen 12 out of 23 products