Midea Trial Split Inverter Air Conditioner PRIME 9+9+12 series with M3O-27NF8 R-32 9000+9000+12000 btu 1) Model Product code 2x MA2-09NXD0 Power 9000 btu Dimensions WxDxH mm 805x205x285 mm 2) Model Product code MA2-12NXD0 Power 12000 btu Dimensions WxDxH mm 805x205x285 mm OUTDOOR UNIT: Catalog number: M3O-27FN8-Q Gases: R-32 Max indoor units that can be combined: 3 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 7.91 Absorbed power (Max): W 2460 SEER Seasonal Energy Efficiency: 6.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 425 Heating Nominal Capacity kW: 8.21 Absorbed power (Max): W 2250 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1960 Performance: Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 59 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 845x363x702 ; 53 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: - "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability - High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. - Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. - Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Prime The geometries used for the splits of the PRIME range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Internal fan rotation speed linear regulation The rotation speed of the internal fan, beyond the usual predefined activity levels, can be adjusted within the values 1-100%: Follow me function Prime series remote controls are equipped with a temperature sensor which the unit considers as "ambient" temperature. In fact, by setting the Follow me function, the appliance is able to "follow the real temperature perceived by the user, guaranteeing maximum comfort. Condensation control The units can work in cooling mode even with a low external temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Refrigerant leak alarm If the temperatures in the refrigerant circuit are irregular due to leaks, a specific fault code (EC) allows you to identify this condition. emergency function In the event of failure of one of the product's sensors, operation can continue in Emergency mode until the faulty part is replaced. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. Super cool function The Super Cool function is a real hallmark of PRIME air conditioners: activated by simply pressing a button, this particular mode maximizes the rotation speed of the internal fan, thus increasing the flow of cold air and allowing the appliance to reduce the temperature to 17°C as quickly as possible Gear function The Prime units are equipped with the GEAR function which offers the user the possibility of independently managing the power supplied by the unit, choosing one of the 3 different levels: 50%, 75% and 100%. In this way you can disregard the classic settings by concentrating solely on the "gear" in which you want the unit to operate: first, second or third. ECO function The Midea Prime series units are equipped with a special iECO mode which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners "Do Not Disturb" mode By pressing a button on the remote control, Prime can enter DO NOT DISTURB mode, thus silencing all acoustic warnings, turning off the indoor unit display and optimizing the silence of the indoor fan. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.238,00
Technical features Indoor Units 1) Model Indoor Unit Catalog Code : 2x MSAGXAU-09HRDN8 EAN: 8052705163223 Power : 9000 Btu Cooling Capacity: 2.64 kW Heating Capacity: : 2.93 kW Air flow: 330~520 m 3 /h Sound Power Level : 54 dB(A) Sound pressure level : 20~37 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 726x210x291 mm Indoor Unit Weight: 8.0 Kg Optional Wi-Fi CE-SK 105 2) Model Indoor Unit Catalog Code : 1x MSAGXBU-12HRDN8 EAN: 8052705163247 Power : 12000 Btu Cooling Capacity: 3.52 kW Heating Capacity: : 3.81 kW Air flow: 350~530 m 3 /h Sound Power Level : 56 dB(A) Sound pressure level : 21~37 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 835x208x295 mm Indoor Unit Weight: 8.7 Kg Optional Wi-Fi CE-SK 105 Outdoor Unit Outdoor Unit Catalog Code: M3OF-27HFN8-Q EAN : 8052705160116 Connectable Indoor Units : 3 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 453 kWh/a Annual energy consumption in Heating : 1993 kWh/a Performance: Cooling Capacity: 7.91 kW Heating Capacity: 8.21 kW Std Cooling Absorption : 2450 W Heating Std Absorption: 2200 W Sound power level : 67 dB(A) Sound pressure level : 54 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation data: Pipe diameter Liquid : 6.35 mm (1/4") x3 Gas pipe diameter : 9.52 mm (3/8") x3 Maximum piping length: 30 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 845x363x702 mm Weight of Outdoor Unit: 51.1 Kg Midea Evolution The evolution of technology. With the Midea Evolution Series air conditioner you can keep control of your domestic consumption thanks to the iECO and GearShift functions, discover true comfort by setting the air conditioner in Follow Me, Breeze Away and Super Cool modes and enjoy your home in safety thanks to the sterilization function for deep cleaning and quick disinfection. Furthermore, thanks to a special anticorrosive treatment, the heat exchanger of the external unit will be resistant to salt air and external atmospheric pollutants. Self-diagnosis In the event of a failure, a fault code system allows users to report defects in a simple and clear way to quickly activate the assistance service 1W Stand By In the event of a prolonged stop, the indoor units completely remove the power supply to the outdoor unit, reducing electricity consumption in the Stand-By phase Fan linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values 1-100%. Echo function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product when used in cooling mode Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant leaks, a specific fault code (EL-0C) allows to identify this condition GEAR function The SMART units are equipped with the GEAR function which allows you to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product Control your climate with your voice The Right series air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Midea Smart Kit (Optional) The indoor units of the Elegance series can be equipped with the CE-SK105 accessory to be managed by a dedicated APP via WLAN connection Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units of the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.110,00
Technical features Indoor Units 1) Model Indoor Unit Catalog Code : 1x MSAGXAU-09HRDN8 EAN: 8052705163223 Power : 9000 Btu Cooling Capacity: 2.64 kW Heating Capacity: : 2.93 kW Air flow: 330~520 m 3 /h Sound Power Level : 54 dB(A) Sound pressure level : 20~37 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 726x210x291 mm Indoor Unit Weight: 8.0 Kg Optional Wi-Fi CE-SK 105 2) Model Indoor Unit Catalog Code : 3x MSAGXBU-12HRDN8 EAN: 8052705163247 Power : 12000 Btu Cooling Capacity: 3.52 kW Heating Capacity: : 3.81 kW Air flow: 350~530 m 3 /h Sound Power Level : 56 dB(A) Sound pressure level : 21~37 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 835x208x295 mm Indoor Unit Weight: 8.7 Kg Optional Wi-Fi CE-SK 105 Outdoor Unit Outdoor Unit Catalog Code: M4O-36FN8-Q EAN : 8033638102428 Connectable Indoor Units : 4 Energy efficiency: SEER: 6.5 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 565 kWh/a Annual energy consumption in Heating : 3220 kWh/a Performance: Cooling Capacity: 10.55 kW Heating Capacity: 10.55 kW Std Cooling Absorption : 3270 W Heating Std Absorption: 2845 W Sound power level : 70 dB(A) Sound pressure level : 63 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x4 Gas pipe diameter: 9.52 mm (3/8") x3 + 12.70 mm (1/2") Maximum piping length: 80 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 946x410x810 mm Weight of Outdoor Unit: 68.8 Kg Midea Evolution The evolution of technology. With the Midea Evolution Series air conditioner you can keep control of your domestic consumption thanks to the iECO and GearShift functions, discover true comfort by setting the air conditioner in Follow Me, Breeze Away and Super Cool modes and enjoy your home in safety thanks to the sterilization function for deep cleaning and quick disinfection. Furthermore, thanks to a special anticorrosive treatment, the heat exchanger of the external unit will be resistant to salt air and external atmospheric pollutants. Self-diagnosis In the event of a failure, a fault code system allows users to report defects in a simple and clear way to quickly activate the assistance service 1W Stand By In the event of a prolonged stop, the indoor units completely remove the power supply to the outdoor unit, reducing electricity consumption in the Stand-By phase Fan linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values 1-100%. Echo function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product when used in cooling mode Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant leaks, a specific fault code (EL-0C) allows to identify this condition GEAR function The SMART units are equipped with the GEAR function which allows you to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product Control your climate with your voice The Right series air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Midea Smart Kit (Optional) The indoor units of the Elegance series can be equipped with the CE-SK105 accessory to be managed by a dedicated APP via a WLAN connection Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units in the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.720,00
Technical features Indoor Units 1) Model Indoor Unit Catalog Code: 1x MSFAAU-09HRFN8 Power : 9000 Btu Cooling Capacity: 2.60 kW Heating Capacity: : 2.80 kW Air flow: 500 m 3 /h Sound Power Level : 55 dB(A) Sound pressure level : 19~20.5~35~38dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 940x325x193 mm Indoor Unit Weight: 10.7 Kg Integrated Wi-Fi 2) Model Indoor Unit Catalog Code: 1x MSFAAU-12HRFN8 Power : 12000 Btu Cooling Capacity: 3.50 kW Heating Capacity: : 3.80 kW Air flow: 520 m 3 /h Sound Power Level : 57 dB(A) Sound pressure level : 20.5~21~35.5~38.5dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 940x325x193 mm Indoor Unit Weight: 10.7 Kg Integrated Wi-Fi Outdoor Unit External Unit Catalog Code: M2OD-18HFN8-Q Connectable Indoor Units : 2 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 304 kWh/a Annual energy consumption in Heating : 1537 kWh/a Performance: Cooling Capacity: 5.28 kW Heating Capacity: 5.57 kW Cooling Absorption: 1630 W Heating absorption: 1500 W Sound power level : 65 dB(A) Sound pressure level : 56 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 15 m Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm Weight of Outdoor Unit: 35.5 Kg Midea BreezeleSS+ For Those Who Want True Comfort and Modern Design Rich in technology, Breezeless+ is the best for air conditioning for every room in the house Completely Eliminate Annoying Air Flows New Micro-hole diffusion technology The new micro-hole air diffusion technology significantly increases the well-being of your rooms thanks to a softer and more diffused air supply. And you will no longer be disturbed by annoying flows of cold air A Perfect Pattern of TwinFlap TM Micro-holes Double baffles with micro-holes, for the elimination of direct airflow. No more annoying air flows. Thanks to the inner and outer double flap design, you can precisely adjust the direction and amount of airflow. The double baffles can divert and spread the flow more precisely offering an unmatched level of comfort Hourglass micro-holes The hourglass shape of each micro-hole disperses and mixes the cold air passing through the TwinFlap™ first pressurizing and then de-pressurizing it. Each micro-hole has a different shape and direction from the other, to ensure a uniform air dispersion effect and prevent water condensation on the baffles Grid Diffuser The 7,928 micro-holes on the two deflectors are designed to transform the main airflow into small micro-puffs, allowing for optimal dispersion in all directions. The micro-perforated grid nebulizes the flow in such a gentle way as to be almost imperceptible, giving a sensation of freshness unattainable with traditional systems New Rapid Cooling Technology Cool your rooms quickly thanks to the high speed of the splits and the power of the compressor Ultra-Wide Split Ultra-Fast Opening With a 70mm front opening and high-velocity cross-flow ventilation, the all-new BreezeleSS+ cools your room at incredible speed 3-way Air Distribution for 360° Immersive but Gentle Air Conditioning S-wing design Thanks to the sinuous S-shaped morphology of the outlets on the side edge, the air propagates in the rooms with an incomparable surround effect Tests show that 3 outputs have significantly better performance than 1 Ultra Quiet, Only 20 dB(A) Sweet Dreams For A Better Life The all-new streamlined design of the air duct and fan blows cool air through with minimal friction while reducing operating noise by up to 20dB. It is the same noise made by a flower as it grows. With BreezeleSS+, you have maximum comfort well into the night Versatile, Smart Functions Via App The MideaAIR app is much more than a digital remote control for your air conditioner: it allows you to start your air conditioner away from home, adjust the humidity level between 30% and 90%. Furthermore, it is able to automatically start cleaning and program the intelligent cooling curve during sleeping hours Adjustable Deflectors, Editable Design iECO Mode : Ultra-low Energy Consumption for the whole night Simultaneous adjustment of TwinFlap™ allows flexible climate control that adapts to your needs. It is possible to choose between “gentle” and “very gentle” airflow modes thanks to the adjustment of the double adjustable deflectors. It is possible to enjoy maximum comfort without perceiving any movement of air Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.137,00
Technical features Indoor Units 1) Model Indoor Unit Catalog Code : 2x MSEPBU-09HRFN8 EAN: 8052705161830 Power : 9000 Btu Cooling Capacity: 2.60 kW Heating Capacity: : 2.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi 2) Model Indoor Unit Catalog Code : 1x MSEPBU-12HRFN8 EAN: 8052705161854E12 Power : 12000 Btu Cooling Capacity: 3.50 kW Heating Capacity: : 3.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi Outdoor Unit Outdoor Unit Catalog Code: M3OF-21HFN8-Q EAN : 8052705160109 Connectable Indoor Units : 3 Energy efficiency: SEER: 6.5 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 328 kWh/a Annual energy consumption in Heating: 1890 kWh/a Performance: Cooling Capacity: 6.15 kW Heating Capacity: 6.59 kW Std absorption Cooling : 1900 W Heating Std Absorption: 1770 W Sound power level : 66 dB(A) Sound pressure level : 58 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation data: Pipe diameter Liquid : 6.35 mm (1/4") x3 Gas pipe diameter : 9.52 mm (3/8") x3 Maximum piping length: 30 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 845x363x702 mm Weight of Outdoor Unit: 46.8 Kg Midea All Easy Pro Installing the indoor units is quick and easy, thanks to the graduated installation plate with integrated spirit level and support bracket. The functional components can be disassembled in less than 1 minute. All Easy Pro is equipped with the Eco Eye function which allows you to check the presence of people in the rooms, activating an energy-saving work cycle when they are not occupied, to contain energy consumption. When using the product in dehumidification mode, it is possible to set a desired relative humidity value for the environment, so as not to dry the air excessively Simplified installation and maintenance A series of functions that allow you to install the product in less time. All functional parts of the unit can be removed with a few simple operations to facilitate cleaning and maintenance of the product Intelligent eye By pressing a button on the remote control, a sensor checks for the presence of people in the room and, if no movement is detected in the room, a low energy consumption work cycle is activated Smart drying In dehumidification mode, it is possible to set the desired level of relative humidity in the room, in order to avoid excessive drying of the air Quick installation and easy maintenance With Alle Easy Pro everything is easy, just 1 screw and 1 minute. Save 80% maintenance time compared to standard indoor units Fast installation With All Easy Pro, 6' 47 is enough Traditional system 11' 33" Fan disassembly With All Easy Pro 1' 12" is enough Traditional system 17' 37" PCB replacement 1' 3" is enough for assembly 1' 12" is enough for disassembly Positioning and fixing of the plate without measuring tools Quick installation with super thin plate with integrated scale and spirit level 1. Mark guide point A following the instructions on the plate 2. Move the plate down until it meets the reference hole 3. Align the plate with the built-in level and mark the hole on the other side Wiring in just 3 seconds The pipe fixing clip folds to keep the product raised during the connection of the pipes, offering ample space to facilitate all the operations of tightening the fittings Freedom of installation Maximum height difference of the pipes: 25 m Maximum piping length: 50 m A minimum distance from the ceiling of only 5 cm is required Cleaning and hygiene Cleaning the internal fan is easy, thanks to the innovative design that allows disassembly in 1 minute with just 1 screw. So you can save time and money to dedicate yourself to what you love A flexible solution Thanks to the extreme flexibility of All Easy Pro, you can install it at a minimum distance of only 5 cm from the ceiling, allowing for optimal cooling of the room Simplified filter cleaning All Easy Pro is hygienic and practical: 6 magnetic connectors hold the upper filter in position to allow it to be removed and cleaned whenever desired Intelligent Eye Eco Master Intelligent Eye function automatically activates energy saving mode when it detects an empty room, thus reducing energy costs by up to 25% Smart Kit App with voice control With All Easy Pro technology, you can control the air conditioner with your voice or with the Midea Air app Control your climate with your voice The air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units in the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.374,00
Technical features 1) Model Model: Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 240-380-440 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 810-200-300 ; 8.3kg 2) Model: Model: Mission Pro MSMBCU-18HRFN8 Power: 18000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 5.30 Heating Capacity (kW): 5.50 Air Flow (Min-Med-Max) m3/h 500-580-750 Sound pressure (Silent-Min-Med-Max) dB(A) 21-24-33-42 Sound power (Hi) dB(A) 58 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 12.7mm (1/2”) Indoor Unit (LPA) mm 980-225-325 ; 10.7kg Outdoor Unit Model: Catalog number: M3OF-27HFN8-Q Gases: R-32 Max indoor units that can be combined: 3 Power (V/Hz/Φ) : 220~240/50/1 Capacity: - Cooling down Nominal Capacity kW: 7.90 Absorbed power (Max): W 2430 SEER Seasonal energy efficiency: 6.1 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 453 - Heating Nominal Capacity kW: 8.02 Absorbed power (Max): W 2160 SCOP Seasonal energy efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1855 Performance: Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 54 Sound power (Max) dB(A): 67 Liquid Side Pipe mm 6.35 (X3) Gas Side Pipe mm 9.52 (X3) Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxWxH) (mm): 845-363-702 ; 51.1Kg Max. Total length/ each IU m 60/30 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA MISSION PRO The geometries used for the splits of the MISSION PRO range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Superior Performance Inverter 4 The exclusive QuattroTM Inverter technology allows excellent performance in all conditions of use, making the Midea Inverter compressor one of the best AC compressors in the world. In all conditions, Midea Inverter compressors work powerfully, efficiently, quickly and constantly Maximum efficiency - The step-less linear modulation of the compressor makes it possible to adapt the rotation speed, and therefore the capacity supplied, to the environmental conditions in an extremely precise manner. The compressor perfectly adapts its rotation speed to the needs of the system without waste and with maximum efficiency. Linear regulation - The internal fan speed is user selectable in a linear fashion between 1% and 100% instead of being available in 4 or 5 levels. In this way it is possible to make the product deliver the most congenial air flow to your needs, for maximum comfort. Less Noise - The speed of the external fan adapts to the external temperature conditions and to the working modes of the product, to ensure less noise and maximum efficiency Better Comfort - The temperature that can be set on the products is managed at intervals of 0.5°C. In this way it is possible to find the most correct temperature setting for your well-being. Do Not Disturb function By pressing a button on the remote control it is possible to silence all acoustic alarms, turn off the display of the indoor unit and reduce the speed of the indoor fan to a rotation speed lower than the minimum, normally selectable iECO function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode GEAR function The Mission PRO units are equipped with the Gear function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. The display of the internal unit is able to show, in addition to the selected temperature, also the room temperature and the instantaneous electrical power absorbed during operation Follow me function Select this function and the special sensor located in the infrared control will detect the ambient temperature around you, and then adjust the operation of the air conditioner according to your needs Other features of the series Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. Integrated Midea Smart Kit The indoor units of the MISSION-PRO series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.110,00
Midea BreezeleSS+ 12000 btu R-32 A+++ Inverter Air Conditioner MSFAAU-09HRFN Model: Indoor unit code: MSFAAU-12HRFN8 Outdoor unit code: MOB01-12HFN8A Energy efficiency: SEER: 8.2 SCOP (medium-warm season): 4.6-5.3 Energy Efficiency Class (cooling): A+++ Energy Efficiency Class (heating) medium/hot season: A++/A+++ Performance: Min-nom-max cooling capacity: 1.32-3.52-4.37 kW Min-nom-max absorbed power in cooling: 130-857-1700 W Min-nom-max heating capacity: 0.88-3.81-4.40 kW Min-nom-max absorbed power in heating: 120-952-1550 W Air Flow (Min-Med-Max) m3/min 400-520-640 Indoor unit sound pressure ( (Silent-Min-Med-Max) (db(A)): 20.5-21-35.5-38.5 Internal unit sound power max db(A); 57 Max Outdoor Unit Sound Pressure (db(A)): 55.5 External unit sound power max db(A); 59 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 R32 Refrigerant Type Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35/9.52(1/4"/3/8") Operating limit temperature (Tol) °C -15 Operational Limits Internal temperatures - Cool.(Min-Max) °C WB 17 - 32 - Heating (Min-Max) °C DB 0 - +30 External temperatures - Cool.(Min-Max) °C DB -15 - 50 - Heating (Min-Max) °C WB -25 - 30 Dimensions and weight: Indoor Unit (LxWxH): 940-193-325 mm; 10.7Kg Outdoor Unit (LxWxH): 800-333-554; 28.5 kgs MIDEA BreezeleSS+ The BrezeeleSS+ indoor unit is designed to ensure maximum comfort thanks to the innovative airflow dispersion technology that uses the unique Twin FlapTM baffles with 7,928 tiny holes. Featuring a sinuous S-shape of the side outlets, BreezeleSS+ guarantees an unrivaled surround effect as well as an unmatched cooling speed. New Micro-hole diffusion technology The new micro-hole air diffusion technology significantly increases the well-being of your rooms thanks to a softer and more diffused air supply. And you will no longer be disturbed by annoying flows of cold air. A perfect pattern of TwinFlap™ micro-holes Double baffles with micro-holes, for the elimination of direct airflow. No more annoying air flows. Thanks to the internal and external double flap design, you can precisely adjust the direction and amount of airflow. The double baffles can divert and spread the flow more precisely offering an unmatched level of comfort. Grille diffuser The 7,928 micro-holes on the two deflectors are designed to transform the main airflow into small micro-puffs, allowing for optimal dispersion in all directions. The micro-perforated grid nebulizes the flow in such a gentle way as to be almost imperceptible, giving a sensation of freshness unattainable with traditional systems. Hourglass micro-holes The hourglass shape of each micro-hole disperses and mixes the cold air passing through the TwinFlap™ first pressurizing and then de-pressurizing it. Each micro-hole has a different shape and direction from the other, to ensure a uniform air dispersion effect and prevent water condensation on the baffles. Ultra-Wide Split Ultra-Fast Opening With a 70mm front opening and high-velocity cross-flow ventilation, the all-new BreezeleSS+ cools your room at incredible speed. High-Frequency Inverter Quattro™ Inspired by the performance and reliability of racing car engines, the BreezeleSS+ goes from 0 to 65Hz in 6 seconds, to then comfortably and stably maintain the target performance. The Quattro™ inverter, the heart of the BreezeleSS+, allows you to achieve cooling performance never experienced before. S-wing design Thanks to the sinuous S-shaped morphology of the outlets on the side edge, the air propagates in the rooms with an incomparable surround effect. Tests show that 3 outputs perform much better than 1 Traditional system One exit Irregular Heating / Cooling Strong full-bodied, direct flow BreezeleSS+ 3 air diffusers for 3 directions: center, right, left Precise and punctual temperature regulation No direct stream, just fresh Ultra quiet, only 20dB Sweet dreams for a better life The all-new streamlined design of the air duct and fan blows cool air through with minimal friction while reducing operating noise by up to 20dB. It is the same noise made by a flower as it grows. With BreezeleSS+, you have maximum comfort well into the night. Energy efficiency, class A+++ iECO mode: ultra-low power consumption all night Thanks to the inverter micro-chip and its smart functions, Midea BreezeleSS+, can work stably up to 8 hours at ultra-low frequency. The SEER value at 8.5 is the guarantee of the exceptional energy efficiency of the product. Smart Versatile, smart functions via App The MideaAIR app is much more than a digital remote control for your air conditioner: it allows you to start the air conditioner away from home, adjust the humidity level between 30% and 90%. Furthermore, it is able to automatically start cleaning and program the intelligent cooling curve during sleeping hours. Adjustable deflectors, editable design iECO mode: ultra-low energy consumption all night long Simultaneous adjustment of TwinFlap™ allows flexible climate control that adapts to your needs. It is possible to choose between “gentle” and “very gentle” airflow modes thanks to the adjustment of the double adjustable deflectors. It is possible to enjoy maximum comfort without perceiving any movement of air. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€665,00
Technical features Model: Indoor unit code: MTBE-35 Outdoor unit code: MOUE-35K Technology: 3D DC INVERTER Power: 12000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 3.5 kW Power Output in heating: 3.8 kW Power absorbed in cooling: 1030 W Power absorbed in heating: 995 W Air Flow (Max / Med / Min) (m3/min): 7.5-9.7-11.3 Indoor unit Sound Pressure (Max / Med / Min) (db(A)): 42/38/35 Internal unit sound power max db(A); 54 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35(1/4") / 9.52(3/8") Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 700x635x210 mm; 18 Kgs Outdoor Unit (LxWxH): 810x333x555 mm; 35 kgs To view more product information CLICK HERE General characteristics Single Ducted Indoor Units Flexible air return Rear air inlet is standard, while bottom air inlet is optional. The dimension of the bottom plate and the back flange are the same, so it is easy for the installer to change the air inlet from the back to the bottom Integrated drain pump The drain pump, capable of lifting the condensed water up to 750mm, is standard for both the 4-Way Cassette and the Ducted units. Twin combination Some types of indoor units can be installed in "Twin" mode: a single outdoor unit can connect to two indoor units, expanding the scenario of possible installations. Available in combinations: 18k+18k, 24k+24k, 30k+30k. to air-condition Server Rooms and/or technical rooms. Fresh air intake The "Air Fresh" intake is standard, it is easy to connect it to the external air passage hole.maintenance and assistance Series features: Gas Leak Alarm : In the event that careless installation of the system should cause micro-leaks of refrigerant gas, the system displays a specific alarm signal. Self-diagnosis A performance monitoring system allows Midea air conditioners to diagnose any malfunctions and failures. Technical rooms air conditioning A special technology allows all Midea Splits to be able to operate in "cooling" mode even with external temperatures down to -15°. Ideal for air conditioning Server Rooms and/or technical rooms. Outdoor Unit Heating Tape A PTC heating tape mounted on the base plate of the outdoor unit prevents rain, water or snow from accumulating, ensuring safer operation. Follow me Midea remote controls are equipped with a temperature sensor, which the unit considers as "ambient temperature". The air conditioner therefore works by "following" the real temperature perceived by the user. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€894,00
Ducted air conditioner Midea Inverter 12000 btu R-32 MTIU-12FNXD0 with wired control A++ Model: Indoor unit code: MTIU-12FNXD0 Outdoor unit code: MOB30-12HFN8 Power; 12000 btu/h Energy efficiency: Cooling efficiency SEER: 6.5 SCOP coefficient of performance (Medium Season): 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Cooling capacity kW (Min-Nom-Max) 1.49-3.51-4.75 Heating kW capacity (Min-Nom-Max) 0.97-4.10-5.63 Power absorbed in cooling: 350-950-1620 W Power absorbed in heating: 350-1100-2050 W Indoor unit sound pressure (Min/Med/Max) (db(A)): 28-35-40 Internal unit sound power max db(A); 60 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35(1/4") / 12.7(1/2") Dimensions and weight: Indoor Unit (LxWxH): 700-450-200 mm ; 18 Kgs Outdoor Unit (LxWxH): 800-333-554 mm; 29 kgs Midea ducted R-32 The ducted solution is the idea for all those who want to minimize the visual impact of the air conditioning system, creating a real "invisible" air conditioning system with high performance. The possibility of selecting the flow rate and pressure of the fan on 4 different power levels allows the products to be adapted to various configurations of the duct network. The complete range of accessories makes application simple and immediate in any context. Condensate Drain Pump The ductable units are equipped with a condensate drain pump to facilitate the evacuation of the liquid and facilitate installation. Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Contact Alarm The indoor units are equipped with a logic output which allows the product failure condition to be exported for connection to remote malfunction indication systems. G2 filter The units are equipped with filter and filter holder in standard configuration Display with IR receiver The indoor unit is equipped with an alphanumeric display with integrated IR receiver KRJ-120 G wired controller Indoor units can be connected to the wired controller which has weekly schedule function Fan speed adjustment The rotation speeds of the fan can be adjusted to 4 or 6 different speed levels to be adapted to the configuration of the duct network Fresh air intake The unit has vents in its frame to supply fresh air or fresh air. There are terminals on the indoor units for direct control of an supply fan Fresh air intake The unit has vents in its frame to supply fresh air or fresh air. There are terminals on the indoor units for direct control of an supply fan ON-OFF input The internal units are equipped with a logic input which allows the product to be switched on and off from an external device. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€853,00
Technical features Indoor Units Model Indoor Unit Catalog Code : 4x MSAGXBU-12HRDN8 EAN: 8052705163247 Power : 12000 Btu Cooling Capacity: 3.52 kW Heating Capacity: : 3.81 kW Air flow: 350~530 m 3 /h Sound Power Level : 56 dB(A) Sound pressure level : 21~37 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 835x208x295 mm Indoor Unit Weight: 8.7 Kg Optional Wi-Fi CE-SK 105 Outdoor Unit Outdoor Unit Catalog Code: M4O-36FN8-Q EAN : 8033638102428 Connectable Indoor Units : 4 Energy efficiency: SEER: 6.5 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 565 kWh/a Annual energy consumption in Heating : 3220 kWh/a Performance: Cooling Capacity: 10.55 kW Heating Capacity: 10.55 kW Std Cooling Absorption : 3270 W Heating Std Absorption: 2845 W Sound power level : 70 dB(A) Sound pressure level : 63 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x4 Gas pipe diameter: 9.52 mm (3/8") x3 + 12.70 mm (1/2") Maximum piping length: 80 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 946x410x810 mm Weight of Outdoor Unit: 68.8 Kg Midea Evolution The evolution of technology. With the Midea Evolution Series air conditioner you can keep control of your domestic consumption thanks to the iECO and GearShift functions, discover true comfort by setting the air conditioner in Follow Me, Breeze Away and Super Cool modes and enjoy your home in safety thanks to the sterilization function for deep cleaning and quick disinfection. Furthermore, thanks to a special anticorrosive treatment, the heat exchanger of the external unit will be resistant to salt air and external atmospheric pollutants. Self-diagnosis In the event of a failure, a fault code system allows users to report defects in a simple and clear way to quickly activate the assistance service 1W Stand By In the event of a prolonged stop, the indoor units completely remove the power supply to the outdoor unit, reducing electricity consumption in the Stand-By phase Fan linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values 1-100%. Echo function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product when used in cooling mode Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant leaks, a specific fault code (EL-0C) allows to identify this condition GEAR function The SMART units are equipped with the GEAR function which allows you to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product Control your climate with your voice The Right series air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Midea Smart Kit (Optional) The indoor units of the Elegance series can be equipped with the CE-SK105 accessory to be managed by a dedicated APP via WLAN connection Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units of the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.835,00
Technical features Indoor Units Model Indoor Unit Catalog Code: 2x MSFAAU-12HRFN8 Power : 12000 Btu Cooling Capacity: 3.50 kW Heating Capacity: : 3.80 kW Air flow: 520 m 3 /h Sound Power Level : 57 dB(A) Sound pressure level : 20.5~21~35.5~38.5dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 940x325x193 mm Indoor Unit Weight: 10.7 Kg Integrated Wi-Fi Outdoor Unit External Unit Catalog Code: M2OD-18HFN8-Q Connectable Indoor Units : 2 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 304 kWh/a Annual energy consumption in Heating : 1537 kWh/a Performance: Cooling Capacity: 5.28 kW Heating Capacity: 5.57 kW Cooling Absorption: 1630 W Heating absorption: 1500 W Sound power level : 65 dB(A) Sound pressure level : 56 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 15 m Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm Weight of Outdoor Unit: 35.5 Kg Midea BreezeleSS+ For Those Who Want True Comfort and Modern Design Rich in technology, Breezeless+ is the best for air conditioning for every room in the house Completely Eliminate Annoying Air Flows New Micro-hole diffusion technology The new micro-hole air diffusion technology significantly increases the well-being of your rooms thanks to a softer and more diffused air supply. And you will no longer be disturbed by annoying flows of cold air A Perfect Pattern of TwinFlap TM Micro-holes Double baffles with micro-holes, for the elimination of direct airflow. No more annoying air flows. Thanks to the inner and outer double flap design, you can precisely adjust the direction and amount of airflow. The double baffles can divert and spread the flow more precisely offering an unmatched level of comfort Hourglass micro-holes The hourglass shape of each micro-hole disperses and mixes the cold air passing through the TwinFlap™ first pressurizing and then de-pressurizing it. Each micro-hole has a different shape and direction from the other, to ensure a uniform air dispersion effect and prevent water condensation on the baffles Grid Diffuser The 7,928 micro-holes on the two deflectors are designed to transform the main airflow into small micro-puffs, allowing for optimal dispersion in all directions. The micro-perforated grid nebulizes the flow in such a gentle way as to be almost imperceptible, giving a sensation of freshness unattainable with traditional systems New Rapid Cooling Technology Cool your rooms quickly thanks to the high speed of the splits and the power of the compressor Ultra-Wide Split Ultra-Fast Opening With a 70mm front opening and high-velocity cross-flow ventilation, the all-new BreezeleSS+ cools your room at incredible speed 3-way Air Distribution for 360° Immersive but Gentle Air Conditioning S-wing design Thanks to the sinuous S-shaped morphology of the outlets on the side edge, the air propagates in the rooms with an incomparable surround effect Tests show that 3 outputs have significantly better performance than 1 Ultra Quiet, Only 20 dB(A) Sweet Dreams For A Better Life The all-new streamlined design of the air duct and fan blows cool air through with minimal friction while reducing operating noise by up to 20dB. It is the same noise made by a flower as it grows. With BreezeleSS+, you have maximum comfort well into the night Versatile, Smart Functions Via App The MideaAIR app is much more than a digital remote control for your air conditioner: it allows you to start your air conditioner away from home, adjust the humidity level between 30% and 90%. Furthermore, it is able to automatically start cleaning and program the intelligent cooling curve during sleeping hours Adjustable Deflectors, Editable Design iECO Mode : Ultra-low Energy Consumption for the whole night Simultaneous adjustment of TwinFlap™ allows flexible climate control that adapts to your needs. It is possible to choose between “gentle” and “very gentle” airflow modes thanks to the adjustment of the double adjustable deflectors. It is possible to enjoy maximum comfort without perceiving any movement of air Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.169,00
Technical features Indoor Units 1) Model Indoor Unit Catalog Code : 1x MSEPBU-09HRFN8 EAN: 8052705161830 Power : 9000 Btu Cooling Capacity: 2.60 kW Heating Capacity: : 2.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi 2) Model Indoor Unit Catalog Code : 1x MSEPBU-12HRFN8 EAN: 8052705161854E12 Power : 12000 Btu Cooling Capacity: 3.50 kW Heating Capacity: : 3.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi Outdoor Unit External Unit Catalog Code: M2OD-18HFN8-Q EAN : 8052705160093 Connectable Indoor Units : 2 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 304 kWh/a Annual energy consumption in Heating : 1537 kWh/a Performance: Cooling Capacity: 5.28 kW Heating Capacity: 5.57 kW Std Cooling Absorption : 1630 W Std Heating Absorption: 1500 W Sound power level : 65 dB(A) Sound pressure level : 56 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation data: Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 25 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 800x333x554 mm Weight of Outdoor Unit: 35.5 Kg Midea All Easy Pro Installing the indoor units is quick and easy, thanks to the graduated installation plate with integrated spirit level and support bracket. The functional components can be disassembled in less than 1 minute. All Easy Pro is equipped with the Eco Eye function which allows you to check the presence of people in the rooms, activating an energy-saving work cycle when they are not occupied, to contain energy consumption. When using the product in dehumidification mode, it is possible to set a desired relative humidity value for the environment, so as not to dry the air excessively Simplified installation and maintenance A series of functions that allow you to install the product in less time. All functional parts of the unit can be removed with a few simple operations to facilitate cleaning and maintenance of the product Intelligent eye By pressing a button on the remote control, a sensor checks for the presence of people in the room and, if no movement is detected in the room, a low energy consumption work cycle is activated Smart drying In dehumidification mode, it is possible to set the desired level of relative humidity in the room, in order to avoid excessive drying of the air Quick installation and easy maintenance With Alle Easy Pro everything is easy, just 1 screw and 1 minute. Save 80% maintenance time compared to standard indoor units Fast installation With All Easy Pro, 6' 47 is enough Traditional system 11' 33" Fan disassembly With All Easy Pro 1' 12" is enough Traditional system 17' 37" PCB replacement 1' 3" is enough for assembly 1' 12" is enough for disassembly Positioning and fixing of the plate without measuring tools Quick installation with super thin plate with integrated scale and spirit level 1. Mark guide point A following the instructions on the plate 2. Move the plate down until it meets the reference hole 3. Align the plate with the built-in level and mark the hole on the other side Wiring in just 3 seconds The pipe fixing clip folds to keep the product raised during the connection of the pipes, offering ample space to facilitate all the tightening operations of the fittings Freedom of installation Maximum height difference of the pipes: 25 m Maximum piping length: 50 m A minimum distance from the ceiling of only 5 cm is required Cleaning and hygiene Cleaning the internal fan is easy, thanks to the innovative design that allows disassembly in 1 minute with just 1 screw. So you can save time and money to dedicate yourself to what you love A flexible solution Thanks to the extreme flexibility of All Easy Pro, you can install it at a minimum distance of only 5 cm from the ceiling, allowing for optimal cooling of the room Simplified filter cleaning All Easy Pro is hygienic and practical: 6 magnetic connectors hold the upper filter in position to allow it to be removed and cleaned whenever desired Intelligent Eye Eco Master Intelligent Eye function automatically activates energy saving mode when it detects an empty room, thus reducing energy costs by up to 25% Smart Kit App with voice control With All Easy Pro technology, you can control the air conditioner with your voice or with the Midea Air app Control your climate with your voice The air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units of the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.094,00
You have seen 252 out of 374 products
