By purchasing the SMART KEY and installing the APP on your iOS or Android mobile device, you can control every function of the air conditioner even remotely. Note: the room where the air conditioner is installed must be covered by a home Wi-Fi network. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: Indoor unit code: MCDE-52 Outdoor unit code: MOUE-52K Technology: 3D DC INVERTER Power (btu/h): 18000 Energy efficiency: Cooling efficiency SEER: 6.3 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Annual Energy Consumption cooling/heating kWh/a: 294/1715 Performance: Power Output in cooling: 5.28 kW Power Output in heating: 5.57 kW Absorbed power in cooling: 1685 W Power absorbed in heating: 1460 W Air flow (Min-Med-Max) m3/min: 11.7-13.3-16.7 Indoor unit Sound Pressure (Max / Med / Min) (db(A)): 46/41/37 Internal unit sound power max db(A); 56 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35/12.7(1/4"/1/2") Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 840x840x205 mm; 22 kgs Panel (LxWxH) 950x950x55 mm; 5kh Outdoor Unit (LxWxH): 800x333x556 mm; 37 kgs General characteristics 90x90cm 4-Way Mono Cassette Indoor Units 360° Airflow Panel The 360° air distribution makes the air conditioning more homogeneous for uncompromising comfort. ON/OFF contact and Alarm door On the electronic board there is a reserved ON/OFF contact for the automatic switching on or off of the system: a very requested application in hotels. On the electronic board there is also an alarm port, which can send a signal to an external device, in the event of any malfunctions Independent Control of the Flaps The direction of each flap can be set independently “Twin” combination Some types of indoor units can be installed in "Twin" mode: a single outdoor unit can connect to two indoor units, expanding the scenario of possible installations. Available in combinations: 18k+18k, 24k+24k, 30k+30k. Series features: Gas Leak Alarm : In the event that careless installation of the system should cause micro-leaks of refrigerant gas, the system displays a specific alarm signal. Self-diagnosis A performance monitoring system allows Midea air conditioners to diagnose any malfunctions and breakdowns. Technical rooms air conditioning A special technology allows all Midea Splits to be able to operate in "cooling" mode even with external temperatures down to -15°. Ideal for air conditioning Server Rooms and/or technical rooms. Outdoor Unit Heating Tape A PTC heating tape mounted on the base plate of the outdoor unit prevents rain, water or snow from accumulating, ensuring safer operation. Follow me Midea remote controls are equipped with a temperature sensor, which the unit considers as "ambient temperature". The air conditioner therefore works by "following" the real temperature perceived by the user. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Indoor unit code: MISSION-WF-35 IU Outdoor unit code: MISSION-35 OU White color Technology: 3D DC INVERTER Energy efficiency: Cooling efficiency SEER: 7.2 SCOP coefficient of performance: 4.2/5.3 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+/A+++ Annual energy consumption in cooling/heating: 170/900 KWh/A Performance: Cooling capacity: 3.52 kW Power absorbed in cooling: 1088 W Heating capacity: 3.82 kW Power absorbed in heating: 1025 W Indoor unit Sound Pressure (Min / Med / Max) (db(A)): 28/35/38 Internal unit sound power max db(A); 51 Max Outdoor Unit Sound Pressure (db(A)): 54 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-410 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35/9.52(1/4"/3/8") Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 810x200x300 mm ; 8 kgs Outdoor Unit (LxWxH): 800x333x555 mm; 30 Kgs General characteristics MIDEA MISSION WF Series features: "Arctic Fox" remote control : The brand new "Arctic Fox" remote control offers maximum ease of use, combined with an ultra-modern design. Thanks to its intuitive logic, although the number of buttons has decreased compared to previous remote controls, its control possibilities have increased. Midea Air: From today you can control your Midea air conditioner with the Midea Air mobile application . The APP, available for both iOS and Android devices, has been designed to offer even more features and greater ease of use. An example? Turn on the air conditioner on your way home so that you can enjoy the desired temperature when you return. iEco Mode: The Mission WF units are equipped with a special iECO mode, which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. Sleep Curve The use of the Midea App allows an even more accurate control of your air conditioner: starting from the possibility of programming a "Sleep Curve", or rather a series of desired temperatures at any time of the night. You can opt for one of the pre-set options, or create one to your liking. Wi-Fi Control (Optional) By purchasing a special SMART KEY and installing the APP on your iOS or Android mobile device, you can control every function of the air conditioner even remotely. Note: the room where the air conditioner is installed must be covered by a home Wi-Fi network Easy Touch A remote control specifically designed for the Mission range ensures maximum ease and intuitive use. The elegance of the object and the large display go well with the lines of the splits "Do Not Disturb" mode In "Sleep" mode, i.e. the function that guarantees maximum comfort during the night, the Splits in the Mission range have been designed to absorb even less electricity than in the past. Now you can finally sleep peacefully. "Diamond" Outdoor Unit Mission boasts an extremely robust external unit chassis, resistant to atmospheric agents, and characterized by a "diamond" design with a strong aesthetic impact: for the pleasure of the eyes, every single screw has been duly "hidden" to give the product a even more monolithic look. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor Units 1) Model : Internal Unit Code : 2x MSMBAU-09HRFN8 Power : 9000 Btu Cooling Capacity: 2.60 kW Heating Capacity: 2.80 kW Air Flow : 240-380-440 m 3 /h Liquid Pipe : 6.35 mm (1/4) Gas Pipe: 9.52 mm (3/8) Internal Unit Dimensions: 810x200x300 mm Indoor Unit Weight: 8.3 Kg Wi-Fi Optional : CE-SK 102 code 2) Model : Internal Unit Code : 1x MSMBCU-18HRFN8 Power : 18000 Btu Cooling Capacity: 5.30 kW Heating Capacity: 5.50 kW Air Flow : 500-580-750 m 3 /h Liquid Pipe : 6.35 mm (1/4) Gas Pipe: 12.7 mm (3/8) Internal Unit Dimensions: 980x225x325 mm Indoor Unit Weight: 10.7 Kg Wi-Fi Optional : CE-SK 102 code Outdoor Unit : Model : Outdoor Unit Code: M3O-36NF8 Connectable Indoor Units : 3 Energy efficiency: SEER : 6.1 (W/W) SCOP : 4.0 (W/W) Energy Efficiency Class (Cooling) : A++ Energy Efficiency Class (Heating) : A+ Annual energy consumption Cooling/Heating : 453/1993 kWh/a Performance: Cooling Capacity: 2.88-7.91-8.50 kW Heating Capacity: 1.99-8.21-8.50 kW Std absorption Cooling: 240-2450-3220 W Std heating absorption: 320-2200-2840 kW Sound power level : 67 dB(A) Sound pressure level : 54 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15~48°C - Heating: -15~24°C Liquid Pipes: 6.35 mm (1/4) Gas pipes: 9.52 mm (3/8) Dimensions: External Unit Dimensions (WxHxD): 845x363x702 mm Weight of Outdoor Unit: 51.1 Kg Midea Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Mission Pro Mission PRO is the ideal solution for those who want to combine environmental sustainability, high performance and safety. A lot of product as powerful as it is silent, able to guarantee optimal rest for each member of the family. As with the entire residential range, Mission PRO is also equipped with Midea's flagship technology, the Inverter QuattroTM, silent and with excellent performance with attention to domestic consumption The ideal solution for those who care about the environment and savings: Mission PRO combines high performance, low consumption and safety in a single product. An air conditioner as powerful as it is silent, to guarantee the best rest for the whole family Gear function The Mission PRO units are equipped with the Gear function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. The display of the internal unit is able to show, in addition to the selected temperature, also the room temperature and the instantaneous electrical power absorbed during operation iECO function Thanks to this function it is possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode "Do Not Disturb" function Thanks to a simple button on the remote control it is possible to silence all the acoustic warnings, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable Internal Fan Rotation Speed ​​Linear Regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values ​​1-100% Wi-Fi Optional Controllable with smartphone through the Wi-Fi line . Control the temperature in your home or office all year round. By purchasing a special SMART KEY and installing the APP on your iOS or Android mobile device, you can control every function of the air conditioner even remotely. Note: the room where the air conditioner is installed must be covered by a home Wi-Fi network Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor Units Model Indoor Unit Catalog Code : 2x MSEPBU-09HRFN8  EAN: 8052705161830 Power : 9000 Btu Cooling Capacity: 2.60 kW Heating Capacity: : 2.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi Outdoor Unit Outdoor Unit Catalog Code: M2OG-14HFN8-Q EAN : 8052705160086 Connectable Indoor Units : 2 Energy efficiency: SEER : 6.8 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 211 kWh/a Annual energy consumption in Heating : 1295 kWh/a Performance: Cooling Capacity: 4.10 kW Heating Capacity: 6.60 kW Std Cooling Absorption : 1270 W Heating Std Absorption: 1770 W Sound power level : 64 dB(A) Sound pressure level : 57 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation data: Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 25 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 800x333x554 mm Weight of Outdoor Unit: 31.6 Kg Midea All Easy Pro Installing the indoor units is quick and easy, thanks to the graduated installation plate with integrated spirit level and support bracket. The functional components can be disassembled in less than 1 minute. All Easy Pro is equipped with the Eco Eye function which allows you to check the presence of people in the rooms, activating an energy-saving work cycle when they are not occupied, to contain energy consumption. When using the product in dehumidification mode, it is possible to set a desired relative humidity value for the environment, so as not to dry the air excessively Simplified installation and maintenance A series of functions that allow you to install the product in less time. All functional parts of the unit can be removed with a few simple operations to facilitate cleaning and maintenance of the product Intelligent eye By pressing a button on the remote control, a sensor checks for the presence of people in the room and, if no movement is detected in the room, a low energy consumption work cycle is activated Smart drying In dehumidification mode, it is possible to set the desired level of relative humidity in the room, in order to avoid excessive drying of the air Quick installation and easy maintenance With Alle Easy Pro everything is easy, just 1 screw and 1 minute. Save 80% maintenance time compared to standard indoor units Fast installation With All Easy Pro, 6' 47 is enough Traditional system 11' 33" Fan disassembly With All Easy Pro 1' 12" is enough Traditional system 17' 37" PCB replacement 1' 3" is enough for assembly 1' 12" is enough for disassembly Positioning and fixing of the plate without measuring tools Quick installation with super thin plate with integrated scale and spirit level 1. Mark guide point A following the instructions on the plate 2. Move the plate down until it meets the reference hole 3. Align the plate with the built-in level and mark the hole on the other side Wiring in just 3 seconds The pipe fixing clip folds to keep the product raised during the connection of the pipes, offering ample space to facilitate all the tightening operations of the fittings Freedom of installation Maximum height difference of the pipes: 25 m Maximum piping length: 50 m A minimum distance from the ceiling of only 5 cm is required Cleaning and hygiene Cleaning the internal fan is easy, thanks to the innovative design that allows disassembly in 1 minute with just 1 screw. So you can save time and money to dedicate yourself to what you love A flexible solution Thanks to the extreme flexibility of All Easy Pro, you can install it at a minimum distance of only 5 cm from the ceiling, allowing for optimal cooling of the room Simplified filter cleaning All Easy Pro is hygienic and practical: 6 magnetic connectors hold the upper filter in position to allow it to be removed and cleaned whenever desired Intelligent Eye Eco Master Intelligent Eye function automatically activates energy saving mode when it detects an empty room, thus reducing energy costs by up to 25% Smart Kit App with voice control With All Easy Pro technology, you can control the air conditioner with your voice or with the Midea Air app Control your climate with your voice The air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units of the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: Indoor unit code: MSMBDU-24HRFN8 Outdoor unit code: MOCA01-24HFN8 Wi-Fi Optional : CE-SK 102 code Energy efficiency: SEER: 7.2 SCOP(medium-cold-hot season): 3.7-4.0-5.4 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating) medium/cold/hot season: A/A+/A+++ Performance: Nominal cooling capacity: 7.03 kW Nominal cooling power consumption: 2205 W Nominal heating capacity: 7.62 kW Nominal heating input power: 2029 W Air flow rate (Min-Med-Max): 9.2-11.7-17.5 m3/min Indoor unit sound pressure ( (Silent-Min-Med-Max) (db(A)): 24-26-37-48 Internal unit sound power max db(A); 61 Max Outdoor Unit Sound Pressure (db(A)): 61 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 9.52/15.88 Type of Refrigerant: R32 Operating Limits: Internal temperatures: - Cool.(Min-Max) °C: 20 – 32 - Heating (Min-Max) °C: 0 – +30 Internal temperatures: - Cool.(Min-Max) °C: -15 – 50 - Heating (Min-Max) °C: -15 – 30 Dimensions and weight: Indoor Unit (LxWxH): 1090-235-388 mm; 13 Kgs Outdoor Unit (LxDxH): 845x363x702 mm ; 49.7 Kgs MIDEA MISSION PRO Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and of linear step-less modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The MISSION-PRO units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Integrated Midea Smart Kit The indoor units of the MISSION-PRO series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection. Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Diamond Design Outdoor Unit The outdoor units feature a unique diamond cut shape with no visible screws on the unit portal. R32: The Refrigerant of the Future 6 Reasons to Choose the new R32 Refrigerant: It is a safe refrigerant, already used as a component of R410A It is a pure single component that is easily reusable It is a refrigerant with zero ODP (Ozone Depleting Potential). It is a refrigerant with a GWP (Global Warming Potential) of 675, approximately one-third that of R410A It is more efficient than previously used HFC refrigerants It is the most innovative solution to combine environmental sustainability, performance and safety Low CO2 equivalent emissions Thanks to the reduced value of the GWP index, the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A. “GIMME 5”: 5 YEARS OF RELAXATION Midea offers exclusively for each purchase of air conditioners in the MISSION R32 range an Additional Warranty that complements the 24-month Warranty normally offered on products. This is the "Gimme 5" formula, specifically designed by Midea for the MISSION R32 range, which automatically extends the warranty terms up to a maximum duration of 5 years, structured as follows: The warranty extension does not require any activation: it is sufficient to keep the purchase document and the warranty certificate that accompanies the product for the entire duration of the warranty period. * "Gimme 5" by Midea is valid for all purchasers of the products, throughout the national territory, exclusively for the products of the MISSION R32 range distributed by Midea Italia Srl To enjoy this service, these products must be correctly installed and maintained, in accordance with current regulations. The warranty is aimed at restoring the correct functioning of the appliances, with the exception of non-functional parts. Further information is available in the warranty certificate accompanying the products and on the website www.midea.com/it in the technical support/warranty section. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Midea Dual Split Inverter Air Conditioner MISSION PRO 12+18 series with M2OD-18FN8-Q R-32 Wi-Fi Optional 12000+18000 1) Model Model: Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 240-380-440 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 810-200-300 ; 8.3kg 2) Model: Model: Mission Pro MSMBCU-18HRFN8 Power: 18000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 5.30 Heating Capacity (kW): 5.50 Air Flow (Min-Med-Max) m3/h 500-580-750 Sound pressure (Silent-Min-Med-Max) dB(A) 21-24-33-42 Sound power (Hi) dB(A) 58 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 12.7mm (1/2”) Indoor Unit (LPA) mm 980-225-325 ; 10.7kg Outdoor Unit Model: Catalog number: M2OD-18FN8-Q Gases: R-32 Max indoor units that can be combined: 3 Power (V/Hz/Φ) : 220~240/50/1 Capacity: - Cooling down Nominal Capacity kW: 7.90 Absorbed power (Max): W 2430 SEER Seasonal energy efficiency: 6.1 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 453 - Heating Nominal Capacity kW: 8.02 Absorbed power (Max): W 2160 SCOP Seasonal energy efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1855 Performance: Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 54 Sound power (Max) dB(A): 67 Liquid Side Pipe mm 6.35 (X3) Gas Side Pipe mm 9.52 (X3) Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxWxH) (mm): 845-363-702 ; 51.1Kg Max. Total length/ each IU m 60/30 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA MISSION PRO The geometries used for the splits of the MISSION PRO range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Superior Performance Inverter 4 The exclusive QuattroTM Inverter technology allows excellent performance in all conditions of use, making the Midea Inverter compressor one of the best AC compressors in the world. In all conditions, Midea Inverter compressors work powerfully, efficiently, quickly and constantly Maximum efficiency - The step-less linear modulation of the compressor makes it possible to adapt the rotation speed, and therefore the capacity supplied, to the environmental conditions in an extremely precise manner. The compressor perfectly adapts its rotation speed to the needs of the system without waste and with maximum efficiency. Linear regulation - The internal fan speed is user selectable in a linear fashion between 1% and 100% instead of being available in 4 or 5 levels. In this way it is possible to make the product deliver the most congenial air flow to your needs, for maximum comfort. Less Noise - The speed of the external fan adapts to the external temperature conditions and to the working modes of the product, to ensure less noise and maximum efficiency Better Comfort - The temperature that can be set on the products is managed at intervals of 0.5°C. In this way it is possible to find the most correct temperature setting for your well-being. Do Not Disturb function By pressing a button on the remote control it is possible to silence all acoustic alarms, turn off the display of the indoor unit and reduce the speed of the indoor fan to a rotation speed lower than the minimum, normally selectable iECO function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode GEAR function The Mission PRO units are equipped with the Gear function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. The display of the internal unit is able to show, in addition to the selected temperature, also the room temperature and the instantaneous electrical power absorbed during operation Follow me function Select this function and the special sensor located in the infrared control will detect the ambient temperature around you, and then adjust the operation of the air conditioner according to your needs Other features of the series Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. Integrated Midea Smart Kit The indoor units of the MISSION-PRO series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

MIDEA QUADRI SPLIT INVERTER AIR CONDITIONER MISSION PRO 9+9+9+18 series with M4O-36FN8 R-32 Wi-Fi OPTIONAL 9000+9000+9000+18000 Indoor Units 1) Model: Model: 3x Mission Pro MSMBBU-09HRFN8 Power: 9000 btu/h Indoor Unit WxDxH (mm): 810×200×300 ; 8.5kg 2) Model Model: Mission Pro MSMBBU-18HRFN8 Power: 18000 btu/h Indoor Unit WxDxH (mm): 980x225x325 mm; Weight: 10.7Kg Outdoor Unit Model : Catalog number: M4O-36FN8-Q Gases: R-32 Max indoor units that can be combined: 4 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 10.55 Absorbed power (Max): W 3520 SEER Seasonal Energy Efficiency: 7.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 565 Heating Nominal Capacity kW: 10.55 Absorbed power (Max): W 2880 SCOP Seasonal energy efficiency (W/W): 3.8 Energy Efficiency Class: A Annual energy consumption KWh/A: 3426 Performance: Outdoor Unit Air Flow: m3/h 4000 External Unit Sound Pressure Max (dB(A)): 63 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxWxH) (mm):946x410x810 ; 68.8 Kg Max. Total length/each UI m 45/25 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit. Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA MISSION PRO The geometries used for the splits of the MISSION PRO range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Superior Performance Inverter 4 The exclusive QuattroTM Inverter technology allows excellent performance in all conditions of use, making the Midea Inverter compressor one of the best AC compressors in the world. In all conditions, Midea Inverter compressors work powerfully, efficiently, quickly and constantly Maximum efficiency - The step-less linear modulation of the compressor makes it possible to adapt the rotation speed, and therefore the capacity supplied, to the environmental conditions in an extremely precise manner. The compressor perfectly adapts its rotation speed to the needs of the system without waste and with maximum efficiency. Linear regulation - The internal fan speed is user selectable in a linear fashion between 1% and 100% instead of being available in 4 or 5 levels. In this way it is possible to make the product deliver the most congenial air flow to your needs, for maximum comfort. Less Noise - The speed of the external fan adapts to the external temperature conditions and to the working modes of the product, to ensure less noise and maximum efficiency Better Comfort - The temperature that can be set on the products is managed at intervals of 0.5°C. In this way it is possible to find the most correct temperature setting for your well-being. Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. iECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. GEAR function The Mission PRO units are equipped with the Gear function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. The display of the internal unit is able to show, in addition to the selected temperature, also the room temperature and the instantaneous electrical power absorbed during operation. Follow me function Select this function and the special sensor located in the infrared control will detect the ambient temperature around you, and then adjust the operation of the air conditioner according to your needs. Other features of the series: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. Integrated Midea Smart Kit The indoor units of the MISSION-PRO series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use. Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely.

Read more less

Technical features Indoor unit catalog number : MSMA2BU-12HRDN8 Outdoor unit catalog code : MOX133-12HFN8 Power : 12000 Btu Energy efficiency SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual Energy Consumption in Cooling : 211 kWh/a Annual Energy Consumption in Heating: 686 kWh/a Performance Cooling Capacity: 3.52 kW Heating Capacity: 3.81 kW Cooling Absorption: 1213 W Heating absorption: 1100 W Air flow rate : 10 m 3 /min Sound Power Level Indoor Unit : 53 dB(A) External Unit Sound Power Level: 63 dB(A) Sound Pressure Level Indoor Unit: 22-28-34-38 dB(A) Sound Pressure Level Outdoor Unit: 56 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 50°C - Heating: -15° ~ 30°C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 10 m Maximum absorbed current: 9.8 A Dimensions and weight Internal Unit Dimensions (WxHxD): 805x285x205 mm Indoor Unit Weight: 7.9 Kg External Unit Dimensions (WxHxD): 770x550x270 mm Weight of Outdoor Unit: 22.7 Kg Midea First Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Speed ​​linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values ​​1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor, limiting its capacity to 75% and 50% of the nominal value, improving efficiency. supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Sophisticated design The design of the First range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Midea Inverter Air Conditioner XTREME series 24000 Btu R-32 A++ Integrated Wi-Fi MSAGDU-24HRFN8 Model: Indoor unit code: MSAGDU-24HRFN8 Outdoor unit code: MOX401-24HFN8 Energy efficiency: SEER: 6.4 SCOP: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating) A+ Annual cooling/heating energy consumption kWh/A: 383 / 1715 Performance: Min-nom-max cooling capacity: 2.58-7.33-8.44 Min-nom-max absorbed power in cooling: 230-2402-3350 W Heating capacity min-nom-max: 1.52-7.62-9.44 kW Min-nom-max absorbed power in heating: 230-2177-3370 W Air flow (Min-med-Max) m3/min: 640-830-1020 Indoor unit sound pressure (Min-Med-Max) (db(A)): 30-40-46 Internal unit sound power max db(A); 62 Max outdoor unit sound pressure (db(A)): 60 Max outdoor unit sound power (db(A)): 67 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 9.52/15.88 Type of refrigerant: R32 Dimensions and weight: Indoor Unit (WxDxH): 1083-377-244 mm ; 13 Kgs External Unit (LxWxH): 890-673-342 mm; 51 kgs Xtreme - New The new Midea Xtreme air conditioning series "flexes its muscles" in terms of product performance, combining a refined and compact design with extreme performance to meet the challenges of the most difficult installations, with the certainty of the promise of comfort, regardless from the environmental conditions. To guarantee you the greatest comfort in the world Midea Inverter air conditioners offer three operating modes: 50%, 75% and 100% power. You can choose your preferred mode to save energy. Temperature oscillation contained in +/-0.1 °C It is no longer necessary to repeatedly turn the air conditioner on or off or to continuously adjust the temperature because Inverter 4 efficiently keeps the temperature constant thanks to the variation in the rotation speed of the compressor. High silence Extreme operates with a low noise level, less than 20 decibels to ensure that your sleep is not disturbed. No more drafts, now only gentle air blows Avoid the wind blowing directly at you by using the remote control to instantly adjust the wind direction. Air conditioning of large rooms The optimized air duct design and turbo fan speed provide a fuller airflow and allow cool air to travel up to 25 meters*. (*applies to 90IDU only). 3D Airflow The directional flaps move automatically to direct the air flow to every corner of the room and keep it enveloping cool. Midea smart kit The indoor units of the Xtreme series are supplied with Midea smart kit to be managed by a dedicated APP via WLAN connection Cooling and heating Energy class A+++/A++ kW power: 2.6 / 3.2 / 5.3 / 7.2 Self-diagnosis 1W Standby Condensation control Follow me function Echo function LED displays Refrigerant leak alarm GEAR function Do Not Disturb function Hydrophillic Aluminum Remote control Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor Unit Catalog No. : MSMADU-24HRFN8, EAN: 8052705161014 Outdoor Unit Catalog No. : MOCA02-24HFN8, EAN: 8052705161021 Power : 24000 Btu Optional Wi-Fi CE-SK 103 Energy efficiency SEER : 6.1 SCOP : 4.0 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual Energy Consumption in Cooling : 402 kWh/a Annual Energy Consumption in Heating: 1645 kWh/a Performance Cooling Capacity: 7.03 kW Heating Capacity: 7.33 kW Cooling absorption: 2.43 kW Heating absorption: 2.46 kW Treated Air Internal Unit: 14.3 m 3 /min Sound Power Level Indoor Unit : 56 dB(A) External Unit Sound Power Level: 68 dB(A) Sound Pressure Level Indoor Unit : 22~47 dB(A) Sound Pressure Level Outdoor Unit : 60 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 50°C - Heating: -25° ~ 30° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 15.88 mm (5/8") Maximum piping length: 50 m Maximum height difference Indoor Unit / Outdoor Unit: 25 m Dimensions and weight Internal Unit Dimensions (LxWxH): 1038x235x325 mm Indoor Unit Weight: 12.8 Kg External Unit Dimensions (LxWxH): 845x363x702 mm Weight of Outdoor Unit: 51.2 Kg Midea Right The design of the Right range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Control your climate with your voice The Right series air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Remote Control (Smart Kit) The indoor units can be equipped with Midea Smart Kit (optional) in order to be controlled remotely via the Midea AIR app wherever you are supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Speed ​​linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values ​​1-100%. Sophisticated design The design of the Right range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor Units Model Indoor Unit Catalog Code : 3x MSEPBU-12HRFN8 EAN: 8052705161854E12 Power : 12000 Btu Cooling Capacity: 3.50 kW Heating Capacity: : 3.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi Outdoor Unit Outdoor Unit Catalog Code: M3OF-27HFN8-Q EAN : 8052705160116 Connectable Indoor Units : 3 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 453 kWh/a Annual energy consumption in Heating : 1993 kWh/a Performance: Cooling Capacity: 7.91 kW Heating Capacity: 8.21 kW Std Cooling Absorption : 2450 W Heating Std Absorption: 2200 W Sound power level : 67 dB(A) Sound pressure level : 54 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation data: Pipe diameter Liquid : 6.35 mm (1/4") x3 Gas pipe diameter : 9.52 mm (3/8") x3 Maximum piping length: 30 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 845x363x702 mm Weight of Outdoor Unit: 51.1 Kg Midea All Easy Pro Installing the indoor units is quick and easy, thanks to the graduated installation plate with integrated spirit level and support bracket. The functional components can be disassembled in less than 1 minute. All Easy Pro is equipped with the Eco Eye function which allows you to check the presence of people in the rooms, activating an energy-saving work cycle when they are not occupied, to contain energy consumption. When using the product in dehumidification mode, it is possible to set a desired relative humidity value for the environment, so as not to dry the air excessively Simplified installation and maintenance A series of functions that allow you to install the product in less time. All functional parts of the unit can be removed with a few simple operations to facilitate cleaning and maintenance of the product Intelligent eye By pressing a button on the remote control, a sensor checks for the presence of people in the room and, if no movement is detected in the room, a low energy consumption work cycle is activated Smart drying In dehumidification mode, it is possible to set the desired level of relative humidity in the room, in order to avoid excessive drying of the air Quick installation and easy maintenance With Alle Easy Pro everything is easy, just 1 screw and 1 minute. Save 80% maintenance time compared to standard indoor units Fast installation With All Easy Pro, 6' 47 is enough Traditional system 11' 33" Fan disassembly With All Easy Pro 1' 12" is enough Traditional system 17' 37" PCB replacement 1' 3" is enough for assembly 1' 12" is enough for disassembly Positioning and fixing of the plate without measuring tools Quick installation with super thin plate with integrated scale and spirit level 1. Mark guide point A following the instructions on the plate 2. Move the plate down until it meets the reference hole 3. Align the plate with the built-in level and mark the hole on the other side Wiring in just 3 seconds The pipe fixing clip folds to keep the product raised during the connection of the pipes, offering ample space to facilitate all the tightening operations of the fittings Freedom of installation Maximum height difference of the pipes: 25 m Maximum piping length: 50 m A minimum distance from the ceiling of only 5 cm is required Cleaning and hygiene Cleaning the internal fan is easy, thanks to the innovative design that allows disassembly in 1 minute with just 1 screw. So you can save time and money to dedicate yourself to what you love A flexible solution Thanks to the extreme flexibility of All Easy Pro, you can install it at a minimum distance of only 5 cm from the ceiling, allowing for optimal cooling of the room Simplified filter cleaning All Easy Pro is hygienic and practical: 6 magnetic connectors hold the upper filter in position to allow it to be removed and cleaned whenever desired Intelligent Eye Eco Master Intelligent Eye function automatically activates energy saving mode when it detects an empty room, thus reducing energy costs by up to 25% Smart Kit App with voice control With All Easy Pro technology, you can control the air conditioner with your voice or with the Midea Air app Control your climate with your voice The air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units of the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less