VALID WHILE STOCKS LAST FIRST START-UP INCLUDED! Technical features Model : Auriga 16M Remote control panel A7750381 Heating with low temperature application Outside air temperature 7°C87% RH Water temperature 30/35°C Nominal thermal power: 16.30 kW COP : 4.45 Outside air temperature 7°C87% RH Water temperature 40/45°C Nominal thermal power: 16.20 kW COP : 3.43 Heating with medium temperature application Outside air temperature 7°C87% RH Water temperature 47/55°C Nominal thermal power: 16.10 kW COP : 2.73 Cooling Outside air temperature 35°CWater temperature 23/18°C Nominal cooling capacity: 15.50 kW EER : 4.26 Outside air temperature 35°CWater temperature 7°C Nominal cooling capacity: 13.80 kW EER : 2.65 Energy efficiency Seasonal low temperature space heating energy efficiency: 169% Seasonal energy efficiency of medium temperature space heating: 128% Seasonal low temperature energy efficiency class: A+++ Seasonal energy efficiency class at medium temperature: A++ Performance Exchanger water flow rate: 2.82 m3 /h Pump useful head: 62 kPa Sound power level: 71 dB(A) Sound pressure level: 58.1 dB(A) Electrical data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R32 Installation data Hydraulic pipe diameter: 1'' 1/4 Dimensions and weight Dimensions (HxWxD): 1414x1404x373 mm Empty weight: 158.0 Kg Monobloc Inverter Air-Water Heat Pumps BAXI AURIGA Baxi introduces Auriga , the new range of monobloc inverter air-water heat pumps with single-phase and three-phase power supply. The range is characterised by ease and simplicity of installation . Furthermore, the increased prevalence of the on-board circulator allows the unit to be installed in large systems, covering greater distances from the heating plant or installing the unit directly to serve the fan coils. The range is wide and consists of 7 models from 5 to 16 kW, single-phase and three-phase versions . Wide range of power from 5 to 16 kW to satisfy all system needs: heating, cooling and DHW production Easy to install in various living contexts The increased head pump allows you to deal with greater pressure drops such as large systems or directly serving fan coils. Remote control panel Allows control of system functions, programming and parameter verification. Furthermore, the Modbus connection allows integration with BMS systems. Components Twin rotary DC inverter compressor complete with internal thermal protection and crankcase resistance, it is mounted on anti-vibration rubbers and wrapped on an insulating casing to reduce the transmission of noise and vibrations due to operation Brazed plate water-coolant exchanger in AISI 316 steel with external anti-condensation insulation in expanded polypropylene and anti-freeze resistance to prevent ice formation in the exchanger Air-refrigerant exchanger finned aluminium battery with hydrophilic treatment to facilitate the flow of condensation, mechanically expanded copper tubes with internal shaping to increase heat exchange. Furthermore, the optimised circuitry allows for a reduction in ice formation in the battery during heat pump operation. Axial fan fan directly coupled to the variable speed brushless DC motor with high efficiency. The fan is installed on aerodynamic nozzles and safety grilles Refrigeration circuit made of pickled copper, includes the electronic expansion valve, dehydrating filters, high and low pressure switches, pressure transducer, cycle reversal valves, liquid receiver and separator, refrigerant injection valve in suction Hydraulic circuit in addition to the brazed plate exchanger, the unit includes the high-head circulator, the expansion vessel, the safety valve, the flow switch, the pressure gauge and the air vent valve and the metal mesh Y-filter, assembly by the installer Electrical panel includes fuse protection of the main internal components; the terminal block is divided into a power section for powering the unit and a control terminal block for connecting auxiliary inputs and outputs and connection to the control panel Baxi Auriga Maximum energy efficiency Monoblock system for the production of heating, cooling and DHW Wide operating range, with external air up to -25°C in heating, up to 46°C in cooling ACS system management: production up to 60°C, boiler temperature management, ACS recirculation pump and solar thermal integration Suitable for integration with radiant terminals, fan coils and mixed systems Integrated management with different system systems: boiler integration, solar integration, diverter valve management and secondary circuit pump Intelligent defrosting thanks to the simultaneous monitoring of ambient temperature, refrigerant temperature, produced water temperature and operating mode Compressor with DC inverter technology with high modulation range Modbus network connection Low GWP R-32 refrigerant Standard control functions Control panel to manage different system configurations directly from the unit Heating and cooling management with 16 different climate curves per mode ACS boiler management, solar integration, boiler and ACS recirculation pump management Boiler integration management and backup electric resistance Anti-legionella function Eco mode with double adjustable setpoint Silent mode with 2 adjustable silence levels Holiday mode: antifreeze and DHW management with dedicated setpoints and anti-legionella treatment on DHW at the end of the set mode Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

CONFIGURATION AND START UP MANDATORY PIT-A2W-START UP NOT INCLUDED! Technical features Catalog code: WH-MXC12J9E8 Wi-Fi Optional : CZ-TAW1 Energy efficiency Energy efficiency class at medium temperatures: A++ Energy efficiency class at low temperatures: A++ Performance Cooling capacity: 12.0 kW Heating capacity: 12.0 kW Sound power level: 65 dB(A) Electrical data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R-32 Operating range - Cooling: -10° ~ 43° C - Heating: -20° ~ 35° C Installation data Hydraulic pipe diameter: 1 mm (1/4") Dimensions and weight Dimensions (HxWxD): 1410x1283x320 mm Empty weight: 140.0 Kg Aquarea Heat Pumps Efficiency at the highest levels Panasonic introduces an innovative low energy consumption system based on air-to-water heat pump technology. Aquarea heats your home effectively and efficiently, even in extreme outdoor temperatures. Aquarea can cool spaces even in summer and bring hot water all year round. Aquarea High Performance is the range for new installations and low consumption homes. Exceptional efficiency and energy savings with reduced CO 2 emissions and minimal space. The Monobloc system has only one outdoor unit. The system does not require a refrigerated connection and is only connected to heating and / or hot water A heat pump transforms thermal energy outside into heat inside With Aquarea 80% of the required thermal energy is taken from the environment. Aquarea, through heat exchange with the outside air and the refrigerant gas contained in it, is able to heat/cool the water by conveying it to the domestic air conditioning system and satisfies all the needs for the production of domestic hot water 3 good reasons why Aquarea is the ideal solution for your home Wide range to suit all homes Aquarea is an innovative, energy-efficient system designed to provide ideal temperatures and domestic hot water, even in extreme outdoor temperatures. It is highly reliable thanks to the quality of all components, including the compressor, developed and manufactured by Panasonic. With the possibility of choosing between multiple units, Aquarea ensures a very wide range availability to ensure the most appropriate choice for your home, regardless of its size Heat pump, 80% energy at zero cost Based on air-water heat pump technology, Aquarea is highly efficient and environmentally friendly. It captures the thermal energy present in the air and transfers it to heat the water needed to heat your home, for domestic hot water and even to cool your home if you wish. In this way, up to 80% of the thermal energy required is taken from the ambient air, even at extremely low temperatures It helps you save You can save up to €1,100 per year compared to conventional electric heating. Although the initial investment may be higher than other technologies, the running costs are much cheaper, with a shorter payback period. The savings are significant, especially when compared to electric oil boilers and heaters Aquarea with R32 Refrigerant The detail that makes the difference Panasonic recommends R32 refrigerant because it is environmentally friendly. Unlike R22 and R410A gases, R32 refrigerant has a low potential impact on the ozone layer and global warming. Panasonic has introduced R32 models to align with all European countries that have adopted the Montreal Protocol to protect the ozone layer and prevent global warming. Innovative Installation Extremely easy to install. (Make sure your pressure gauge and vacuum pump are compatible with R32). This refrigerant is 100% pure, making it easier to recycle and reuse. Environmental Innovation Zero impact on the ozone layer. Reduced impact on global warming by 75% Economic and energy innovation Lower costs and higher savings. Higher efficiency compared to R410A gas Aquarea Service Cloud. Control anytime, anywhere Aquarea Smart Cloud is a powerful, intuitive and free service designed to help you remotely control your Aquarea heat pumps from anywhere, 24/7. Advanced Control is an intelligent, sophisticated and effective service for fully managing the Aquarea range in terms of heating, cooling and domestic hot water functions within the home, including monitoring domestic energy consumption via smartphone, tablet or mobile device. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

3301186 Technical features Model : NIMBUS POCKET M NET 70 Product code : 3301186 Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 6.4 kW Absorbed electrical power: 1.28 kW COP : 5 External air temperature 7°C - Water temperature 45/40°C Nonimal thermal power: 6.0 kW Absorbed electrical power: 1.67 kW COP: 3.6 Cooling External air temperature 35°C - Water temperature 18/23°C Normal cooling capacity: 7.5 kW Absorbed electrical power: 1.5 kW EER : 5 External air temperature 35°C - Water temperature 7/12°C Normal cooling capacity: 7.2 kW Absorbed electrical power: 2.29 kW EER: 3.14 Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

NB: IF THE ITEM IS NOT IMMEDIATELY AVAILABLE IT WILL BE POSSIBLE TO ORDER IT IN 10 WORKING DAYS. First ignition excluded hydronic module ERSD-VM2D SMALL SIZE Power supply Tens./Freq./Phases V/Hz/n° 230/50/1 Reversible version Dimensions HxWxD mm 800 x 530 x 360 System water content of the module 5.2 litres Min/max water flow rate l/min 5.00/36.90 Tens./Freq./Phases V/Hz/n° 230/50/1 System expansion vessel 10 litres Mpa 0.3 safety valve Outdoor Unit SUZ-SWM60VA Voltage/Freq./Phases V/Hz/N° 230/50/1 Dimensions HxWxD mm 880x840x330 Liquid diameters mm(in) 6.35 (1/4) Gas diameters mm(in) 12.7 (1/2) Max length (min) m 30 (5) Max height difference 30 m Min/max heating -20°C/ + 24°C DHW min/max -20°C/ + 35°C Cooling min/max 10°C/ + 46°C R-32 refrigerant gas Heating Air 7° / Water 35° Delta 5°C Capacity Nom. / Max kW 6.00/8.70 Max water temperature °C 60 Low water temperature 35°C (medium season)1 SCOP 4.67 Rank A+++ Medium Water temperature 55°C (medium season) SCOP 3.32 Rank A++ Cooling Air 35° / Water 18° Delta 5°C 6.00/8.30 Power consumption Nom. / Max kW 1.23/2.00 Ecodan system The Ecodan - split system consists of a traditional direct expansion outdoor unit (Power Inverter or Zubadan type) and a hydronic module to be installed indoors, capable of producing cold and hot water for heating or sanitary use. The module is equipped with a control unit FTC4 Split hydroboxes The Hydrobox is the indoor hydronic module for suspended installation , all the main components of the hydraulic system are enclosed in a very small space. A wide range of indoor units The internal hydronic modules of the Ecodan® - Split line offer a wide range of choices: “Hydrobox” guarantees great flexibility of use and versatility of installation. It is possible to associate it with a boiler for domestic hot water; there are various models including the reversible ones with which it is also possible to produce chilled water for summer air conditioning. "Hydrotank" the simplicity and practicality of the "all-in-one", incorporating a 170, 200, 300 liter boiler for the production of domestic hot water. "Split" systems can be connected to an external unit of the " Zubadan” to favor performance at low temperatures or the “Ecodan®” series characterized by the largest extension of the range. The Hydrobox is the Ecodan® indoor hydronic module for wall-hung installation. All the main components of the hydraulic system are enclosed inside it (heat exchanger, hydraulic circulator, expansion vessel, integrative electrical resistance and safety components). Hydrobox has been designed with the utmost care to: Design, simple and elegant; Compact dimensions, for indoor installations; Components located in the front to facilitate maintenance; Hydrobox is developed in two versions: For heating and domestic hot water; Reversible, which in addition to the functions of the classic Hydrobox also allows you to use cooling. FTC6 control system The Ecodan® - Split systems are equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms. Ecodan® R32 outdoor units The new Ecodan® R32 SUZ-SWM outdoor units with capacities of 4.00, 6.00, 8.00 kW combined with the new D-Generation indoor units are the efficient and high-performance solution for heating, cooling and for the production of domestic hot water. Low GWP R32 refrigerant ; Extended operating range up to -20°C ; Efficiency class A+++ in heating and A+ for the production of domestic hot water; Delivery water temperature up to 60°C . High performance in heating The new Ecodan® R32 units are able to adapt to all system solutions and maintain high performance with outdoor temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures. R32: a low environmental impact refrigerant The R32 refrigerant gas complies with the European directives on the reduction of the greenhouse effect, presenting a lower GWP than R410A and not damaging the ozone layer. Exclusive AA Chassis The search for a product that prides itself on its silent operation led to a complete redesign of the unit's chassis. The AA units are lower than previous generation bifan units of equal power and have a discreet and sophisticated design. To reduce fan noise, the new AA chassis outdoor units use a larger diameter fan further away from the coil Extended operating range Operating range in heating extended up to -20°C. The new outdoor units are also suitable for harsher climates. The new layout of the refrigerant circuit limits the risk of resonances and vibrations. The new compressor is installed on rubber supports and is efficiently acoustically isolated by a dedicated structure. The new design of the fan guarantees less acoustic impact. All these technological improvements guarantee a reduction of -10dB (A) in operating noise. Small size The new AA Chassis outdoor units guarantee a smaller footprint thanks to the reduced height dimensions compared to the previous model. High performance The new compressor of the AA outdoor units, more compact and powerful, allows to reach high SCOP values ​​without sacrificing power. The whole series brilliantly exceeds the seasonal energy efficiency class A++ as defined by the European directive ErP Lot 1 New base design The base of the AA outdoor units has been redesigned to optimize and facilitate condensate drainage. The improvement of the defrost logics and the layout of the coil, combined with the new condensate drainage base, make it possible to avoid the formation of ice which could limit the comfort of use. Inverter technology Heat pumps normally reduce their heating capacity when the outside air temperature drops, just as the building's heat demand increases. The inverter technology manages to compensate for the lower thermal yield at low temperatures, by increasing the rotation speed of the compressor . Conversely, when the external air temperature increases, the inverter modulates the frequency, adapting the power supplied to the required heat requirement and drastically reducing electricity consumption . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: IF THE ITEM IS NOT IMMEDIATELY AVAILABLE IT WILL BE POSSIBLE TO ORDER IT IN 10 WORKING DAYS. First ignition excluded Mitsubishi Electric Split Hydrotank Air Water Heat Pump Reversible ERST17D-VM2D storage 170 l outdoor unit ECODAN E SUZ-SWM40VA 5,6 kW R-32 hydronic module ERST17DVM2D SMALL SIZE Power supply Tens./Freq./Phases V/Hz/n° 230/50/1 Reversible version Dimensions HxWxD mm 1400x595x680 System water content of the module 3.40 litres Min/max water flow rate l/min 5.00/25.80 System expansion vessel 12 litres DHW boiler Volume liters 170 Water/plate water exchanger Outdoor Unit SUZ-SWM40VA Voltage/Freq./Phases V/Hz/N° 230/50/1 Dimensions HxWxD mm 880x840x330 Liquid diameters mm(in) 6.35 (1/4) Gas diameters mm(in) 12.7 (1/2) Max length (min) m 30 (5) Max height difference 30 m Min/max heating -20°C/ + 24°C DHW min/max -20°C/ + 35°C Cooling min/max 10°C/ + 46°C R-32 refrigerant gas Heating Air 7° / Water 35° Delta 5°C Nom. / Max kW 4.00/7.10 Max water temperature °C 60 Low water temperature 35°C (medium season)1 SCOP Rank A+++ Medium Water temperature 55°C (medium season) SCOP 3.29 Rank A++ Cooling Air 35° / Water 18° Delta 5°C 5.60/7.00 Power consumption Nom. / Max kW 1.12/1.53 Ecodan system The Ecodan - split system consists of a traditional direct expansion outdoor unit (Power Inverter or Zubadan type) and a hydronic module to be installed indoors, capable of producing cold and hot water for heating or sanitary use. The module is equipped with a control unit FTC4 Hydrotank split The Hydrotank is the indoor hydronic module for floor installation equipped with a 170, 200 or 300 liter storage tank for domestic hot water. A wide range of indoor units The internal hydronic modules of the Ecodan® - Split line offer a wide range of choices: "Hydrotank" the simplicity and practicality of the "all-in-one", incorporating a 170, 200, 300 liter boiler for the production of domestic hot water. The "Split" systems can be connected to an external unit of the "Zubadan" series to favor performance at low temperatures or of the "Ecodan®" series characterized by the largest extension of the range. Hydrotank and reversible Hydrotank The hydrotank is the hydronic module of the Ecodan® line equipped with a 170, 200 or 300 liter storage tank for domestic hot water. The Hydrotank is also available in both the "hot only" version and the reversible version with which it is also possible to produce chilled water for summer air conditioning. Both versions are particularly compact and contain all the main components of the primary hydraulic system. Attention has been paid to the smallest details: Simple, modern and elegant design; Small dimensions that allow installation even in small niches, closets, etc. Easy maintenance, all the main components can be reached simply by removing the front panel. Ease of handling thanks to the lower handle. Ease of transport even in small vans thanks to the compact dimensions and the possibility of laying it down even in a horizontal position. FTC6 control system The Ecodan® - Split systems are equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms. Integrated condensate collection tray for reversible models Inside the reversible Hydrotank units there is space for the condensate collection tray. The unit is equipped with a drain piping to the rear. Exclusive “Scale trap” filter Thanks to the combination of the plate exchanger and the exclusive «Scale trap» filter, the performance of the DHW cycle remains unchanged over time. In traditional systems there is the risk that the calcium, as it precipitates, deposits inside the exchanger, reducing its exchange surface. The Hydrotank is equipped with the exclusive «Scale trap» filter which homogeneously captures the precipitated calcium before it has the possibility to settle in the exchanger. In this way the heat exchange remains unchanged, guaranteeing high performance for the production of domestic hot water SG Ready: integration with photovoltaic systems The new Ecodan® hydronic modules support the SG ready function. Acronym of Smart Grid Ready, the function allows you to maximize the self-consumption of electricity from a photovoltaic system and is implemented with 2 additional inputs. Ecodan® R32 outdoor units The new Ecodan® R32 SUZ-SWM outdoor units with capacities of 4.00, 6.00, 8.00 kW combined with the new D-Generation indoor units are the efficient and high-performance solution for heating, cooling and for the production of domestic hot water. Low GWP R32 refrigerant ; Extended operating range up to -20°C ; Efficiency class A+++ in heating and A+ for the production of domestic hot water; Delivery water temperature up to 60°C . High performance in heating The new Ecodan® R32 units are able to adapt to all system solutions and maintain high performance with outdoor temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures. R32: a low environmental impact refrigerant The R32 refrigerant gas complies with the European directives on the reduction of the greenhouse effect, presenting a lower GWP than R410A and not damaging the ozone layer. Exclusive AA Chassis The search for a product that prides itself on its silent operation led to a complete redesign of the unit's chassis. The AA units are lower than previous generation bifan units of equal power and have a discreet and sophisticated design. To reduce fan noise, the new AA chassis outdoor units use a larger diameter fan further away from the coil Extended operating range Operating range in heating extended up to -20°C. The new outdoor units are also suitable for harsher climates. The new layout of the refrigerant circuit limits the risk of resonances and vibrations. The new compressor is installed on rubber supports and is efficiently acoustically isolated by a dedicated structure. The new design of the fan guarantees less acoustic impact. All these technological improvements guarantee a reduction of -10dB (A) in operating noise. Small size The new AA Chassis outdoor units guarantee a smaller footprint thanks to the reduced height dimensions compared to the previous model. High performance The new compressor of the AA outdoor units, more compact and powerful, allows to reach high SCOP values ​​without sacrificing power. The whole series brilliantly exceeds the seasonal energy efficiency class A++ as defined by the European directive ErP Lot 1 New base design The base of the AA outdoor units has been redesigned to optimize and facilitate condensate drainage. The improvement of the defrost logics and the layout of the coil, combined with the new condensate drainage base, make it possible to avoid the formation of ice which could limit the comfort of use. Inverter technology Heat pumps normally reduce their heating capacity when the outside air temperature drops, just as the building's heat demand increases. The inverter technology manages to compensate for the lower thermal yield at low temperatures, by increasing the rotation speed of the compressor . Conversely, when the external air temperature increases, the inverter modulates the frequency, adapting the power supplied to the required heat requirement and drastically reducing electricity consumption . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

PRODUCT AVAILABLE FROM JANUARY 2022 Technical features Data according to Eurovent conditions LCP/A/CHF* Nominal heating capacity kW 14.5 COP kW/kW 4.06 Nominal cooling capacity kW 16 EER kW/kW 3.81 Data according to Eurovent LCP/A/AC conditions Nominal heating capacity kW 14 COP kW/kW 3.21 Nominal cooling capacity kW 13 EER kW/kW 2.91 Twin-rotary DC compressor with PMV expansion valve Power supply V-ph-Hz 230-1-50 Refrigerant : R-410 Dimensions mm 1363 x 908 x 350 General characteristics CARRIER MINICHILLER The aquasnap plus air-to-water heat pumps with integrated inverter technology are ideal for residential and small commercial applications. They guarantee excellent energy efficiency, are extremely silent in operation and meet the most stringent requirements in terms of operating temperatures. Guaranteed savings and high comfort They guarantee excellent energy efficiency , are extremely silent during operation and meet the most stringent requirements in terms of operating temperatures. The units integrate the most recent technological innovations: R-410A refrigerant for the respect of the ozone layer, twin-rotary DC inverter compressors, low noise fans and microprocessor control. They are specially designed to ensure ease of installation and maintenance. The twin-rotary DC inverter compressor with amplitude (PAM) and frequency (PWM) modulation give absolute reliability , reduced energy consumption and minimum vibrations which translate into extremely silent operation. Furthermore, if combined with a photovoltaic system for the production of electricity, they allow you to further reduce or completely eliminate heating and air conditioning costs. Great modularity of installation and use AquaSnap PLUS heat pump systems can be used with a wide range of Carrier products: underfloor systems , fan coils and fan coils , high temperature radiators . They guarantee high performance in a wide range of temperatures . They are equipped with an outlet to connect and integrate the unit to existing heat sources to offer greater savings and optimal comfort in all weather conditions. The units are compact and small in size ; they can also be transported through narrow passages and take up very little space in the place of installation. Characteristics Outlet water temperature up to 60°C for applications involving the use of hot water for domestic use, with immediately available hot water. * The 30AWH range satisfies the technical requirements and can take advantage of the 55% deduction (Ministerial Decree of 7 April 2008). The units integrate the most recent technological innovations: R-410A refrigerant for the respect of the ozone layer, twin-rotary DC inverter compressors, low noise fan and microprocessor control. Specially designed to ensure ease of installation and maintenance , this product confirms Carrier's reputation as a manufacturer of high quality and reliable equipment. AquaSnap PLUS heat pump systems can be used with a wide range of Carrier products: fan coils, cassette fan coils, low, medium and high pressure satellite units, consoles, ceiling and high-wall units. The wide range of operating limits, both in heating and cooling mode, guarantees high performance in a wide range of temperatures. Twin-rotary DC inverter compressors with Pulse Amplitude Modulation (PAM) and Pulse Width Modulation (PWM) for increased reliability, reduced energy consumption and less vibration under all operating conditions. Outlet to connect and integrate the unit to existing heat sources and offer a bivalent approach, greater savings and optimal comfort in all weather conditions. The variable speed fans with patented innovative blade shape ensure better air distribution with incredibly low noise levels. Thanks to the advanced circuit design and component selection, the unit is compact and space-saving to be easily transported even through narrow doorways. Two versions with or without hydronic module, available in five sizes, with nominal cooling capacities from 3 to 16 kW and nominal heating capacities from 4 to 14.5 kW. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Split systems HIDROTANK Mitsubishi Electric Heating, Cooling, Sanitary use The Ecodan® - Split system consists of a traditional direct expansion outdoor unit and a hydronic module to be installed indoors, capable of producing hot water for heating/cooling and sanitary use. The module is equipped with a control unit FTC6. A wide range of indoor units The internal hydronic modules of the Ecodan® - Split line offer a wide range of choices: • “Hydrobox” guarantees great flexibility of use and installation versatility. It is possible to associate it with a boiler for domestic hot water; there are various models including the reversible ones with which it is also possible to produce chilled water for summer air conditioning • "Hydrotank" the simplicity and practicality of the "all-in-one", incorporating a 170, 200, 300 liter boiler for the production of domestic hot water. An external unit of the "Zubadan" series can be connected to the "Split" systems to favor performance at low temperatures or of the "Ecodan®" series characterized by the largest extension of the range Domestic hot water production Efficiently produced domestic hot water; outlet temperature up to 60°C and energy class A++ Suitable for all system solutions Able to adapt to all system solutions and maintain high performance with external temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures Hydrobox and reversible Hydrobox The Hydrobox is the Ecodan® indoor hydronic module for suspended installation, which contains all the main components of the hydraulic system. The heat exchanger, the hydraulic circulator, an expansion vessel, a supplementary electrical resistance and the safety components can be found in a very small space. Attention has been paid to the smallest details: • simple, modern and elegant design • the small size allows installation in kitchens, closets, small technical rooms, cellars, etc.. • the main components are located in the front part of the unit to facilitate service operations The Hydrobox is available in two versions : • Hydrobox usable for heating and domestic hot water production (optional) • Reversible hydrobox which adds the possibility of providing cooling to the functions of the hydrobox Hydrotank and reversible Hydrotank The Hydrotank is the indoor hydronic module for floor installation of the Ecodan® line equipped with a 170, 200 or 300 liter storage tank for domestic hot water. The Hydrotank is also available in both the "hot only" version and the reversible version with which it is also possible to produce chilled water for summer air conditioning. Both versions are particularly compact and contain all the main components of the primary hydraulic system. Attention has been paid to the smallest details: • Simple, modern and elegant design • Small dimensions that allow installation even in small niches, closets, etc.. • Easy maintenance, all the main components can be reached by simply removing the front panel • Ease of handling thanks to the lower handle • Ease of transport even in small vans thanks to the compact dimensions and the possibility of laying it down even in a horizontal position For the 300 liter models, the system side expansion tank is not included. It is necessary to obtain it from a third party and provide an outdoor space for its installation Integrated condensate collection tray for reversible models Inside the reversible Hydrotank units there is space for the condensate collection tray. The unit is equipped with a drain piping to the rear Exclusive “Scale trap” filter Thanks to the combination of the plate exchanger and the exclusive «Scale trap» filter, the performance of the DHW cycle remains unchanged over time. In traditional systems there is the risk that the calcium, as it precipitates, deposits inside the exchanger, reducing its exchange surface. The Hydrotank is equipped with the exclusive «Scale trap» filter which homogeneously captures the precipitated calcium before it has the possibility to settle in the exchanger. In this way the heat exchange remains unchanged, guaranteeing high performance for the production of domestic hot water High performance Energy class A+ for domestic hot water ACS production is optimised. Thanks to the energy saving function it is possible to reach the highest efficiency class (A+) in compliance with EU Regulation 813/2013 Improved performance thanks to the second THW5A thermistor Optimization of the DHW heating cycles and better use of the hot water in the storage tank thanks to the addition of the second THW5A thermistor, selectable from the remote control New 2-zone kit • Complete kit with all the components for the service of two thermal zones, one at high direct temperature and one mixed at low temperature • 3 selectable speeds of the circulation pump • Compact size and ease of installation: a small box that can be installed on the Hydrotank or hung on the wall for connection to the Hydrobox FTC6 control system The Ecodan® - Split systems are equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms Guided start-up procedure Thanks to the guided configuration it is possible to set the main operating parameters of Ecodan directly from the command during start-up Minimum system water content: less than 1 liter per kW For each specific outdoor unit it is necessary to guarantee a minimum volume of system water, which for Ecodan® and Zubadan split units, for installations in areas with not too harsh climates, is less than 1 liter per kW of unit power external. This means that, in many cases, it will not be necessary to provide a buffer volume to satisfy the minimum required volume Continuous monitoring of operating parameters The main operating parameters can be viewed directly on the control and are collected every 5 minutes and kept in the memory for 120 minutes Ecodan® R32 outdoor units High performance in heating The new Ecodan® R32 units are able to adapt to all system solutions and maintain high performance with outdoor temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures Extended operating range Operating range in heating extended up to -20°C. The new outdoor units are also suitable for the harshest climates Low noise Compared to the R410A version, Ecodan® R32 boasts very low noise levels, which ensure applicability even in the most sensitive contexts Flow temperature up to 60°C Thanks to the water delivery temperature up to 60°C, Ecodan® R32 adapts to any system configuration, both for underfloor heating and for radiators Outdoor units for every need Mitsubishi Electric presents the new series of Ecodan® R32 split outdoor units in sizes 4, 6, 8 kW which are added to the Ecodan® and Zubadan R410A models, dedicated to residential hydronic heating systems The AA Chassis outdoor units are available in sizes 80 and 112 Zubadan and in sizes 75 and 100 Ecodan®. The configuration of the AA-chassis units guarantees very high performance, unprecedented silence and a refined design Unparalleled silence The search for a product that prides itself on its silent operation led to a complete redesign of the unit's chassis. AA units are lower than previous generation twin fan units of equal power and have a discreet and sophisticated design • To reduce fan noise, the new AA chassis outdoor units use a larger diameter fan further away from the coil • The new refrigerant circuit layout limits the risk of resonances and vibrations • The new compressor is installed on rubber mounts and is efficiently acoustically isolated by a dedicated structure. All of these technological improvements ensure a -10dB(A) reduction in operating noise New base design The base of the AA outdoor units has been redesigned to optimize and facilitate condensate drainage. The improvement of the defrost logics and the coil layout, combined with the new condensate drainage base, make it possible to avoid the formation of ice which could limit the comfort of use High performance The new compressor of the AA outdoor units, more compact and powerful, allows to reach high SCOP values ​​without sacrificing power. The whole series brilliantly exceeds the seasonal energy efficiency class A++ as defined by the European directive ErP Lot 1 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FIRST START UP INCLUDED! Technical features Model : Auriga 16T-A Product code : A7794577 Remote Control Panel A7799122 Heating with low temperature application External air temperature 7°C - 87% RH Water temperature 30/35°C Nonimal thermal power: 15.90 kW Absorbed electrical power: 3.53 kW COP: 4.50 External air temperature 7°C - 87% RH Water temperature 35°C Thermal power: 13.10 kW Absorbed electrical power: 4.85 kW COP : 2.70 Heating with medium temperature application External air temperature 7°C - 87% RH Water temperature 45°C Nonimal thermal power: 16.00 kW Absorbed electrical power: 4.57 kW COP : 3.50 External air temperature 7°C - 87% RH Water temperature 55°C Nonimal thermal power: 16.00 kW Absorbed electrical power: 5.61 kW COP: 2.85 Cooling External air temperature 35°C - Water temperature 18°C Nonimal cooling capacity: 14.20 kW Absorbed electrical power: 3.93 kW EER: 3.61 External air temperature 35°C - Water temperature 7°C Nonimal cooling capacity: 14.00 kW Absorbed electrical power: 5.60 kW EER: 2.50 Energy efficiency Seasonal low-temperature space heating energy efficiency : 189% Seasonal space heating energy efficiency at medium temperature : 133% Low temperature seasonal energy efficiency class: A+++ Seasonal energy efficiency class at medium temperature: A++ Performance Exchanger water flow rate: 2.75 m 3 /h Available pump head: 40 kPa Sound power level : 68 dB(A) Sound pressure level : 58 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating limits Heating External air temperature : -25°C ~ 35°C Introduced water temperature : 12°C~ 65°C Cooling down External air temperature : -5°C ~ 43°C Introduced water temperature : 5°C ~ 25°C Installation data Plumbing pipe diameter: 1'' 1/4 Dimensions and weight Dimensions (HxWxD): 865x1385x488 mm Empty weight: 144 Kg BAXI AURIGA Inverter Monobloc Air-Water Heat Pumps introducing the new Auriga . The range is characterized by the ease and simplicity of installation, as well as for reliability and excellent performance . Furthermore, the high head of the circulator, fitted as STANDARD inside the unit, allows installation in large-sized systems, to cover greater distances from the boiler room or to install the unit directly at the service of the fan coils. The range expands and consists of well 8 models from 4 to 16 kW, single-phase and three-phase versions Wide range of powers from 4 to 16 kW to satisfy all system requirements: heating, cooling and DHW production. The power range is made up of the following sizes: 4, 6, 8, 10, 12 and 16 kW. Cascade Thanks to the new operating logics it is possible to install up to 6 units in cascade. By exploiting the modularity and redundancy of the generators, the system efficiently satisfies the requests of all plants. Complete hydraulic equipment as standard High head circulation pump, flow switch, expansion vessel (8L), safety valve, pressure gauge and "Y" strainer Remote control panel Control of system functions, programming and parameter verification. Furthermore, the possibility of connection via Modbus allows integration with BM systems Operating range Wide operating range, with operating temperatures in heating up to 65 °C ErP Energy Labeling The labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A+++ to D (in heating) and from A+ to F (in sanitary). All models of the range (4M-A / 6M-A / 8M-A / 10M-A / 12M-A / 12T-A / 16M-A / 16T-A) reach an efficiency equal to A+++ in low temperature heating Components Twin rotary DC inverter compressor Complete with internal thermal protection and crankcase heater, mounted on anti-vibration rubbers and wound on an insulating hood to reduce the transmission of noise and vibrations due to operation Water-refrigerant exchanger With brazed plates in AISI 316 steel with external anti-condensation insulation in expanded polypropylene and anti-freeze resistance to prevent the formation of ice in the exchanger Air-refrigerant exchanger Aluminum finned coil with hydrophilic treatment to facilitate the flow of condensate, mechanically expanded copper pipes with internal shaping to increase heat exchange. Furthermore, the optimized circuitry reduces the formation of ice in the coil during heat pump operation Fan directly coupled to the high efficiency brushless DC variable speed motor. The fan is installed on aerodynamic nozzles and safety grilles Refrigerant circuit Made of pickled copper, it includes the electronic expansion valve, drier filters, high and low pressure switches, pressure transducer, cycle inversion valves, liquid receiver and separator, refrigerant injection valve on the suction side Hydraulic circuit In addition to the brazed plate heat exchanger, the unit includes the high head circulator, the expansion tank, the safety valve, the flow switch, the pressure gauge, the air vent valve and the metal mesh Y strainer (assembly by the installer) Electrical panel Includes fuse protection of the main internal components; the terminal board is divided into a power section for unit power supply and a control terminal board for connecting auxiliary inputs and outputs and connection to the control panel Main features Baxi Auriga Maximum energy efficiency Monobloc system for the production of heating, cooling and DHW Wide operating range, with external air down to -25°C in heating, up to 43°C in cooling DHW system management: production up to 65°C, storage tank temperature management, DHW recirculation pump and solar thermal integration Suitable for integration with radiant terminals, fan coils and mixed systems Integrated management with various plant systems: boiler integration, solar integration, management of diverter valves and secondary circuit pump Intelligent defrosting thanks to simultaneous monitoring of room temperature, coolant temperature, product water temperature and operating regime Compressor with DC inverter technology with high modulation range Modbus network connection low GWP refrigerant R32 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM071M U43 Energy efficiency EER: 4.5 SCOP: 4.45 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 7.0 kW Heating Capacity: 7.0 kW Nominal flow rate : 1206 l/h Sound Power Level Indoor Unit : 60 dB(A) Sound Pressure Level Outdoor Unit : 50 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 55° C Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1239x834x404 mm Weight of Outdoor Unit: 90.8 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outdoor temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM121M U33 Energy efficiency EER: 4.6 SCOP: 4.45 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 12.0 kW Heating Capacity: 12.0 kW Nominal flow rate : 2070 l/h Sound Power Level Indoor Unit : 63 dB(A) Sound Pressure Level Outdoor Unit : 52 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 55° C Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1239x1380x390 mm Weight of Outdoor Unit: 124.8 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monobloc THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outside temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM161M U33 Energy efficiency EER : 4 SCOP: 4.45 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 16.0 kW Heating Capacity: 16.0 kW Nominal flow rate : 2760 l/h Sound Power Level Indoor Unit : 63 dB(A) Sound Pressure Level Outdoor Unit : 52 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 55° C Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1239x1380x390 mm Weight of Outdoor Unit: 124.8 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and requirement What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outside temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWAQ011ACW1P Energy efficiency EER: 2.85 ESEER: 4.44 Performance Cooling Capacity: 11.1 kW Cooling absorption: 3.9 kW Air Flow : 6000 m 3 /h Water flow rate: 0.525 l/sec Nominal head : 49.1 kPa Sound power level : 64 dB(A) Sound pressure level : 51 dB(A) Electrical data Type of Compressor : Scroll Power supply (V,Hz, Ø) : 400/50/3 Refrigerant gas : R-410 Field of Operation Water : 5° ~ 22° C Air : 10° ~ 46° CBS Installation data Diameter of hydraulic pipe connections: 31.75 mm (5/4") Dimensions and weight Dimensions (HxWxD): 1435x1418xx382 mm Empty weight: 180 Kg Daikin Mini Chiller Systems Air cooled minichiller with Inverter The Daikin Minichiller series dedicated to residential or small commercial applications , with nominal capacities from 5 kW to 13 kW , uses the inverter as a distinctive feature. The hermetic Swing compressor for sizes 005-007 kW and Scroll for the following ones 009-013 kW is driven by Inverter as well as the fans of the unit. High performance is therefore achieved at partial loads, control of the water delivery temperature at a fixed point, which can be used, for example, for radiant panel systems, and excellent acoustic performance at partial loads thanks to the simultaneous reduction of noise emission from both the compressor and of fan. The water content necessary for the correct operation of the unit is reduced thanks to the inverter, and can guarantee operation even without buffer tanks. The water-refrigerant exchanger is with brazed plates Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values ​​higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Scroll compressor Scroll compressors have two scrolls, one remains stationary while the other orbits eccentrically without rotating. Designed for small and medium capacities, they guarantee constant reliability and high efficiency throughout their operational life Characteristics Simple, compact and robust Absence of valves and swing joint mechanisms, to ensure maximum reliability Constant compression, to ensure a low level of energy consumption Increased compression efficiency due to the absence of volumetric expansion Low sound level Low starting current The Scroll compressor lends itself to the use of the Inverter, as on the range up to 13 kW, being able to guarantee high ESEER values, absence of peak and precise control of the outlet water temperature Advantages: › Extraordinary part load efficiency › Inverter technology to ensure low noise and best-in-class ESEER values › Wide operating range › Integrated hydronic systems › Easy “plug and play” installation › Single-phase power supply for residential applications, three-phase power model available for small commercial applications Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less