Our chiller heat pumps represent the innovative energy solution for efficient heating and cooling of rooms. Check it out and discover the benefits today!
Chiller heat pumps
Carrier Mini Chiller Heat Pump Chiller Carrier Aquasnap Plus 8 Kw 30awh008hd Single Phase R-410
PRODUCT AVAILABLE FROM JANUARY 2022 Technical features Data according to Eurovent conditions LCP/A/CHF* Nominal heating capacity kW 7.2 COP kW/kW 3.95 Nominal cooling capacity kW 7.8 EER kW/kW 3.95 Data according to Eurovent LCP/A/A conditions Nominal heating capacity kW 7.4 COP kW/kW 3.18 Nominal cooling capacity kW 5.8 EER kW/kW 2.95 Twin-rotary DC compressor with PMV expansion valve Power supply V-ph-Hz 230-1-50 Refrigerant : R-410 Voltage values \u200b\u200bV 198-264 Dimensions 821 x 908 x 350 mm General characteristics CARRIER MINICHILLER The aquasnap plus air-to-water heat pumps with integrated inverter technology are ideal for residential and small commercial applications. They guarantee excellent energy efficiency, are extremely silent in operation and meet the most stringent requirements in terms of operating temperatures. Guaranteed savings and high comfort They guarantee excellent energy efficiency , are extremely silent during operation and meet the most stringent requirements in terms of operating temperatures. The units integrate the most recent technological innovations: R-410A refrigerant for the respect of the ozone layer, twin-rotary DC inverter compressors, low noise fans and microprocessor control. They are specially designed to ensure ease of installation and maintenance. The twin-rotary DC inverter compressor with amplitude (PAM) and frequency (PWM) modulation give absolute reliability , reduced energy consumption and minimum vibrations which translate into extremely silent operation. Furthermore, if combined with a photovoltaic system for the production of electricity, they allow you to further reduce or completely eliminate heating and air conditioning costs. Great modularity of installation and use AquaSnap PLUS heat pump systems can be used with a wide range of Carrier products: underfloor systems , fan coils and fan coils , high temperature radiators . They guarantee high performance in a wide range of temperatures . They are equipped with an outlet to connect and integrate the unit to existing heat sources to offer greater savings and optimal comfort in all weather conditions. The units are compact and small in size ; they can also be transported through narrow passages and take up very little space in the place of installation. Characteristics Outlet water temperature up to 60°C for applications involving the use of hot water for domestic use, with immediately available hot water. * The 30AWH range satisfies the technical requirements and can take advantage of the 55% deduction (Ministerial Decree of 7 April 2008). The units integrate the most recent technological innovations: R-410A refrigerant for the respect of the ozone layer, twin-rotary DC inverter compressors, low noise fan and microprocessor control. Specially designed to ensure ease of installation and maintenance , this product confirms Carrier's reputation as a manufacturer of high quality and reliable equipment. AquaSnap PLUS heat pump systems can be used with a wide range of Carrier products: fan coils, cassette fan coils, low, medium and high pressure satellite units, consoles, ceiling and high-wall units. The wide range of operating limits, both in heating and cooling mode, guarantees high performance in a wide range of temperatures. Twin-rotary DC inverter compressors with Pulse Amplitude Modulation (PAM) and Pulse Width Modulation (PWM) for increased reliability, reduced energy consumption and less vibration under all operating conditions. Outlet to connect and integrate the unit to existing heat sources and offer a bivalent approach, greater savings and optimal comfort in all weather conditions. The variable speed fans with patented innovative blade shape ensure better air distribution with incredibly low noise levels. Thanks to the advanced circuit design and component selection, the unit is compact and space-saving to be easily transported even through narrow doorways. Two versions with or without hydronic module, available in five sizes, with nominal cooling capacities from 3 to 16 kW and nominal heating capacities from 4 to 14.5 kW. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.871,00
-
Carrier Mini Chiller Heat Pump Chiller Carrier Aquasnap Plus 12 Kw 30awh012hd Single Phase R-410
PRODUCT AVAILABLE FROM JANUARY 2022 Technical features Data according to Eurovent conditions LCP/A/CHF* Nominal heating capacity kW 11.9 COP kW/kW 3.94 Nominal cooling capacity kW 13.5 EER kW/kW 3.67 Data according to Eurovent LCP/A/A conditions Nominal heating capacity kW 12.9 COP kW/kW 3.03 Nominal cooling capacity kW 10.2 EER kW/kW 3.46 Twin-rotary DC compressor with PMV expansion valve Power supply V-ph-Hz 230-1-50 Refrigerant : R-410 Voltage values \u200b\u200bV 198-264 Dimensions mm 1363 x 908 x 350 General characteristics CARRIER MINICHILLER The aquasnap plus air-to-water heat pumps with integrated inverter technology are ideal for residential and small commercial applications. They guarantee excellent energy efficiency, are extremely silent in operation and meet the most stringent requirements in terms of operating temperatures. Guaranteed savings and high comfort They guarantee excellent energy efficiency , are extremely silent during operation and meet the most stringent requirements in terms of operating temperatures. The units integrate the most recent technological innovations: R-410A refrigerant for the respect of the ozone layer, twin-rotary DC inverter compressors, low noise fans and microprocessor control. They are specially designed to ensure ease of installation and maintenance. The twin-rotary DC inverter compressor with amplitude (PAM) and frequency (PWM) modulation give absolute reliability , reduced energy consumption and minimum vibrations which translate into extremely silent operation. Furthermore, if combined with a photovoltaic system for the production of electricity, they allow you to further reduce or completely eliminate heating and air conditioning costs. Great modularity of installation and use AquaSnap PLUS heat pump systems can be used with a wide range of Carrier products: underfloor systems , fan coils and fan coils , high temperature radiators . They guarantee high performance in a wide range of temperatures . They are equipped with an outlet to connect and integrate the unit to existing heat sources to offer greater savings and optimal comfort in all weather conditions. The units are compact and small in size ; they can also be transported through narrow passages and take up very little space in the place of installation. Characteristics Outlet water temperature up to 60°C for applications involving the use of hot water for domestic use, with immediately available hot water. * The 30AWH range satisfies the technical requirements and can take advantage of the 55% deduction (Ministerial Decree of 7 April 2008). The units integrate the most recent technological innovations: R-410A refrigerant for the respect of the ozone layer, twin-rotary DC inverter compressors, low noise fan and microprocessor control. Specially designed to ensure ease of installation and maintenance , this product confirms Carrier's reputation as a manufacturer of high quality and reliable equipment. AquaSnap PLUS heat pump systems can be used with a wide range of Carrier products: fan coils, cassette fan coils, low, medium and high pressure satellite units, consoles, ceiling and high-wall units. The wide range of operating limits, both in heating and cooling mode, guarantees high performance in a wide range of temperatures. Twin-rotary DC inverter compressors with Pulse Amplitude Modulation (PAM) and Pulse Width Modulation (PWM) for increased reliability, reduced energy consumption and less vibration under all operating conditions. Outlet to connect and integrate the unit to existing heat sources and offer a bivalent approach, greater savings and optimal comfort in all weather conditions. The variable speed fans with patented innovative blade shape ensure better air distribution with incredibly low noise levels. Thanks to the advanced circuit design and component selection, the unit is compact and space-saving to be easily transported even through narrow doorways. Two versions with or without hydronic module, available in five sizes, with nominal cooling capacities from 3 to 16 kW and nominal heating capacities from 4 to 14.5 kW. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.601,00
-
IMMERGAS Mini Chiller Heat Pump Air Water Inverter Immergas Audax 6 Dc Monobloc R-410 3.027809 With Control Included
Heat Pump Mini Chiller Air Water Immergas Audax 6 DC Inverter monobloc R-410a 3.027809 Code 3.027809 Useful heating power kW 5.10 Effective cooling power kW 4.35 Dimensions (HxWxD) mm 821 x 908 x 326 R410A refrigerant gas Energy class A++/A++ COP 4.40 EER 4.35 Weight (kg) 57 AUDAX extension The large range of Immergas heat pumps is designed to create integrated or hybrid systems that use renewable energies to offer great comfort, reduce consumption and harmful emissions, comply with the new standards. With the addition of photovoltaic panels, especially useful for heat pump only systems, even greater advantages are obtained. For this reason, all Immergas products are equipped with a photovoltaic contact and make the most of the sun's energy in heating and cooling (with split and monobloc versions) and in water heaters that only produce domestic hot water. AUDAX is the name of the air/water monobloc versions indicated for all system solutions: 4 are the single-phase versions, for homes, of 6, 8, 12 and 16, and 3 are the three-phase versions, for commercial environments and offices, of 16, 18 and 21 kW. Low consumption: thanks to inverter technology , electricity consumption decreases and performance remains high in favor of greater domestic comfort. Storage tank: in combination with a separate storage unit it can produce domestic hot water. Silent operation: low sound impact thanks to special technical solutions. Standard control panel: allows management of the heat pump from any room in the home. High seasonal yields: ideal for air conditioning environments both in winter heating (maximum temperature 60 °C) and in summer cooling (in combination with fan coils or radiant panels combined with dehumidifier). Formula Comfort HYBRID: makes use of the most complete maintenance program which allows the conventional guarantee to be extended to 5 years which, in collaboration with the Immergas Authorized Assistance Centre, can be activated during the initial check. Eco-friendly technology: uses the outside air as a source of renewable energy. Renewable energies: combinable with hybrid and integrated systems for systems of great domestic comfort , it satisfies the new regulatory requirements. Versatile: it can work individually, in combination with integrated systems with boiler or in series for solutions in centralized systems. Positioning: Approved for outdoor, open-air operation. IPX4 electrical protection. SIMPLE USER INTERFACE The control panel - supplied as standard - in addition to displaying the operating diagnostics, also acts as a weekly thermostat for heating/cooling management with room temperature/humidity sensor function in stand-alone applications. Easy to connect, two BUS-type cables are sufficient which allow the exchange of information and two cables for the power supply to be connected to the AUDAX and, therefore, it does not require power batteries. The control panel allows you to: program comfort/economy room temperature set time slots and climatic curve (in heating and cooling) display heat pump error codes Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.900,00
-
MITSUBISHI ELECTRIC Mitsubishi Electric Hydrobox S Reversible Ersd-Vm2d Air Water Heat Pump With Ecodan E Suz-Swm40va 5.6 Kw R-32 Outdoor Unit
NB: IF THE ITEM IS NOT IMMEDIATELY AVAILABLE IT WILL BE POSSIBLE TO ORDER IT IN 10 WORKING DAYS. First ignition excluded Mitsubishi Electric Hydrobox S Reversible Air Water Heat Pump ERSD-VM2D 5 kW with ECODAN E SUZ-SWM40VA outdoor unit hydronic module ERSD-VM2D SMALL SIZE Power supply Tens./Freq./Phases V/Hz/n° 230/50/1 Reversible version Dimensions HxWxD mm 800 x 530 x 360 System water content of the module 5.2 litres Min/max water flow rate l/min 5.00/36.90 Tens./Freq./Phases V/Hz/n° 230/50/1 System expansion vessel 10 litres Mpa 0.3 safety valve Outdoor Unit SUZ-SWM40VA Voltage/Freq./Phases V/Hz/N° 230/50/1 Dimensions HxWxD mm 880x840x330 Liquid diameters mm(in) 6.35 (1/4) Gas diameters mm(in) 12.7 (1/2) Max length (min) m 30 (5) Max height difference 30 m Min/max heating -20°C/ + 24°C DHW min/max -20°C/ + 35°C Cooling min/max 10°C/ + 46°C R-32 refrigerant gas Heating Air 7° / Water 35° Delta 5°C Nom. / Max kW 4.00/7.10 Max water temperature °C 60 Low water temperature 35°C (medium season)1 SCOP Rank A+++ Medium Water temperature 55°C (medium season) SCOP 3.29 Rank A++ Cooling Air 35° / Water 18° Delta 5°C 5.60/7.00 Power consumption Nom. / Max kW 1.12/1.53 Ecodan system The Ecodan - split system consists of a traditional direct expansion outdoor unit (Power Inverter or Zubadan type) and a hydronic module to be installed indoors, capable of producing cold and hot water for heating or sanitary use. The module is equipped with a control unit FTC4 Split hydroboxes The Hydrobox is the indoor hydronic module for suspended installation , all the main components of the hydraulic system are enclosed in a very small space. A wide range of indoor units The internal hydronic modules of the Ecodan® - Split line offer a wide range of choices: “Hydrobox” guarantees great flexibility of use and versatility of installation. It is possible to associate it with a boiler for domestic hot water; there are various models including the reversible ones with which it is also possible to produce chilled water for summer air conditioning. "Hydrotank" the simplicity and practicality of the "all-in-one", incorporating a 170, 200, 300 liter boiler for the production of domestic hot water. "Split" systems can be connected to an external unit of the " Zubadan” to favor performance at low temperatures or the “Ecodan®” series characterized by the largest extension of the range. The Hydrobox is the Ecodan® indoor hydronic module for wall-hung installation. All the main components of the hydraulic system are enclosed inside it (heat exchanger, hydraulic circulator, expansion vessel, integrative electrical resistance and safety components). Hydrobox has been designed with the utmost care to: Design, simple and elegant; Compact dimensions, for indoor installations; Components located in the front to facilitate maintenance; Hydrobox is developed in two versions: For heating and domestic hot water; Reversible, which in addition to the functions of the classic Hydrobox also allows you to use cooling. FTC6 control system The Ecodan® - Split systems are equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms. Ecodan® R32 outdoor units The new Ecodan® R32 SUZ-SWM outdoor units with capacities of 4.00, 6.00, 8.00 kW combined with the new D-Generation indoor units are the efficient and high-performance solution for heating, cooling and for the production of domestic hot water. Low GWP R32 refrigerant ; Extended operating range up to -20°C ; Efficiency class A+++ in heating and A+ for the production of domestic hot water; Delivery water temperature up to 60°C . High performance in heating The new Ecodan® R32 units are able to adapt to all system solutions and maintain high performance with outdoor temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures. R32: a low environmental impact refrigerant The R32 refrigerant gas complies with the European directives on the reduction of the greenhouse effect, presenting a lower GWP than R410A and not damaging the ozone layer. Exclusive AA Chassis The search for a product that prides itself on its silent operation led to a complete redesign of the unit's chassis. The AA units are lower than previous generation bifan units of equal power and have a discreet and sophisticated design. To reduce fan noise, the new AA chassis outdoor units use a larger diameter fan further away from the coil Extended operating range Operating range in heating extended up to -20°C. The new outdoor units are also suitable for harsher climates. The new layout of the refrigerant circuit limits the risk of resonances and vibrations. The new compressor is installed on rubber supports and is efficiently acoustically isolated by a dedicated structure. The new design of the fan guarantees less acoustic impact. All these technological improvements guarantee a reduction of -10dB (A) in operating noise. Small size The new AA Chassis outdoor units guarantee a smaller footprint thanks to the reduced height dimensions compared to the previous model. High performance The new compressor of the AA outdoor units, more compact and powerful, allows to reach high SCOP values without sacrificing power. The whole series brilliantly exceeds the seasonal energy efficiency class A++ as defined by the European directive ErP Lot 1 New base design The base of the AA outdoor units has been redesigned to optimize and facilitate condensate drainage. The improvement of the defrost logics and the layout of the coil, combined with the new condensate drainage base, make it possible to avoid the formation of ice which could limit the comfort of use. Inverter technology Heat pumps normally reduce their heating capacity when the outside air temperature drops, just as the building's heat demand increases. The inverter technology manages to compensate for the lower thermal yield at low temperatures, by increasing the rotation speed of the compressor . Conversely, when the external air temperature increases, the inverter modulates the frequency, adapting the power supplied to the required heat requirement and drastically reducing electricity consumption . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.955,00
-
DAIKIN Daikin Mini Chiller Cooling Only Inverter Air Water Ewaa-016dv3p From 14.0 Kw Single-Phase R-32
OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWAA016DV3P Power : 14.0 kW Energy efficiency SEER: 5.59 Performance Cooling Capacity: 14.0 kW Cooling absorption: 4.58 kW Air Flow : 85 m 3 /min Sound power level : 69 dB(A) Sound pressure level : 51 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Field of Operation Cooling: -10° ~ 43°C Heating: -5° ~ 22°C Installation data Plumbing Pipe Diameter: 25.4 mm (1") male Pipe connections diameter : 25.4 mm (1") Dimensions and weight Dimensions (HxWxD): 1053x1500x650 mm Indoor Unit Weight: 164 Kg Daikin Mini Chiller Systems Small systems for the production of chilled or heated water Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). What is SEER? 'seasonal energy efficiency ratio' ( SEER ) means the seasonal energy efficiency ratio of the unit representative of the entire cooling season, calculated as the reference annual cooling demand divided by the annual electricity consumption for cooling purposes. New parameter representative of the seasonal efficiency of the product . The SEER value is calculated over a period of 2600 operating hours during the year. Of these, only 30 hours of full load operation result. Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when the compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Compressors developed and manufactured by Daikin Daikin has always been at the forefront of compressor technology development and now offers a complete range of swing, scroll, screw and centrifugal compressors. As a result, inverter compressor control is applied across our entire product range, providing more comfort and ensuring a more efficient system. Scroll compressor for capacity control Daikin's compact scroll-type compressors are suitable for use with R32 refrigerant, to ensure constant reliability and high efficiency throughout their life. Optimized for use in small and medium capacity systems, Scroll compressors are combined with air and water cooled chillers. Characteristics: › Simple, compact and robust › Absence of valves and swing joint mechanisms, to ensure maximum reliability › Constant compression, to ensure a low level of energy consumption › Greater compression efficiency thanks to the absence of volumetric re-expansion › Low noise › Low starting current Advantages: › Choosing a product in R32 reduces the environmental impact by 68% compared to R410A and leads directly to lower energy consumption thanks to its high energy efficiency › Chillers with Inverter › Hermetically sealed inverter compressor › New casing of the outdoor unit › Separate MMI-2 controller for indoor installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.916,00
-
DAIKIN Daikin Mini Chiller Cooling Only Inverter Air Water Ewaa-016d1wp From 14.0 Kw Three-Phase R-32
OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWAA016DW1P Power : 14.0 kW Energy efficiency SEER: 5.59 Performance Cooling Capacity: 14.0 kW Cooling absorption: 4.58 kW Air Flow : 85 m 3 /min Sound power level : 69 dB(A) Sound pressure level : 51 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Field of Operation Cooling: -10° ~ 43°C Heating: -5° ~ 22°C Installation data Plumbing Pipe Diameter: 25.4 mm (1") male Pipe connections diameter : 25.4 mm (1") Dimensions and weight Dimensions (HxWxD): 1053x1500x650 mm Indoor Unit Weight: 164 Kg Daikin Mini Chiller Systems Small systems for the production of chilled or heated water Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). What is SEER? 'seasonal energy efficiency ratio' ( SEER ) means the seasonal energy efficiency ratio of the unit representative of the entire cooling season, calculated as the reference annual cooling demand divided by the annual electricity consumption for cooling purposes. New parameter representative of the seasonal efficiency of the product . The SEER value is calculated over a period of 2600 operating hours during the year. Of these, only 30 hours of full load operation result. Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Compressors developed and manufactured by Daikin Daikin has always been at the forefront of compressor technology development and now offers a complete range of swing, scroll, screw and centrifugal compressors. As a result, inverter compressor control is applied across our entire product range, providing more comfort and ensuring a more efficient system. Scroll compressor for capacity control Daikin's compact scroll-type compressors are suitable for use with R32 refrigerant, to ensure constant reliability and high efficiency throughout their life. Optimized for use in small and medium capacity systems, Scroll compressors are combined with air and water cooled chillers. Characteristics: › Simple, compact and robust › Absence of valves and swing joint mechanisms, to ensure maximum reliability › Constant compression, to ensure a low level of energy consumption › Greater compression efficiency thanks to the absence of volumetric re-expansion › Low noise › Low starting current Advantages: › Choosing a product in R32 reduces the environmental impact by 68% compared to R410A and leads directly to lower energy consumption thanks to its high energy efficiency › Chillers with Inverter › Hermetically sealed inverter compressor › New casing of the outdoor unit › Separate MMI-2 controller for indoor installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.000,00
-
DAIKIN Daikin Mini Chiller Cooling Only Inverter Air Water Ewaa-014dv3p From 12.8 Kw Single-Phase R-32
OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWAA014DV3P Power : 12.8 kW Energy efficiency SEER: 5.71 Performance Cooling Capacity: 12.8 kW Cooling absorption: 4.06 kW Air Flow : 85 m 3 /min Sound power level : 69 dB(A) Sound pressure level : 50.8 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Field of Operation Cooling: -10° ~ 43°C Heating: -5° ~ 22°C Installation data Plumbing Pipe Diameter: 25.4 mm (1") male Pipe connections diameter : 25.4 mm (1") Dimensions and weight Dimensions (HxWxD): 1053x1500x650 mm Indoor Unit Weight: 164 Kg Daikin Mini Chiller Systems Small systems for the production of chilled or heated water Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). What is SEER? 'seasonal energy efficiency ratio' ( SEER ) means the seasonal energy efficiency ratio of the unit representative of the entire cooling season, calculated as the reference annual cooling demand divided by the annual electricity consumption for cooling purposes. New parameter representative of the seasonal efficiency of the product . The SEER value is calculated over a period of 2600 operating hours during the year. Of these, only 30 hours of full load operation result. Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Compressors developed and manufactured by Daikin Daikin has always been at the forefront of compressor technology development and now offers a complete range of swing, scroll, screw and centrifugal compressors. As a result, inverter compressor control is applied across our entire product range, providing more comfort and ensuring a more efficient system. Scroll compressor for capacity control Daikin's compact scroll-type compressors are suitable for use with R32 refrigerant, to ensure constant reliability and high efficiency throughout their life. Optimized for use in small and medium capacity systems, Scroll compressors are combined with air and water cooled chillers. Characteristics: › Simple, compact and robust › Absence of valves and swing joint mechanisms, to ensure maximum reliability › Constant compression, to ensure a low level of energy consumption › Greater compression efficiency thanks to the absence of volumetric re-expansion › Low noise › Low starting current Advantages: › Choosing a product in R32 reduces the environmental impact by 68% compared to R410A and leads directly to lower energy consumption thanks to its high energy efficiency › Chillers with Inverter › Hermetically sealed inverter compressor › New casing of the outdoor unit › Separate MMI-2 controller for indoor installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.586,00
-
DAIKIN Daikin Mini Chiller Cooling Only Inverter Air Water Ewaa-011dw1p From 11.6 Kw Three-Phase R-32
OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWAA011DW1P Power : 11.6 kW Energy efficiency SEER: 5.79 Performance Cooling Capacity: 11.6 kW Cooling absorption: 3.56 kW Air Flow : 70 m 3 /min Sound power level : 67 dB(A) Sound pressure level : 48 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Field of Operation Cooling: -10° ~ 43°C Heating: -5° ~ 22°C Installation data Plumbing Pipe Diameter: 25.4 mm (1") male Pipe connections diameter : 25.4 mm (1") Dimensions and weight Dimensions (HxWxD): 1053x1500x650 mm Indoor Unit Weight: 164 Kg Daikin Mini Chiller Systems Small systems for the production of chilled or heated water Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). What is SEER? 'seasonal energy efficiency ratio' ( SEER ) means the seasonal energy efficiency ratio of the unit representative of the entire cooling season, calculated as the reference annual cooling demand divided by the annual electricity consumption for cooling purposes. New parameter representative of the seasonal efficiency of the product . The SEER value is calculated over a period of 2600 operating hours during the year. Of these, only 30 hours of full load operation result. Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Compressors developed and manufactured by Daikin Daikin has always been at the forefront of compressor technology development and now offers a complete range of swing, scroll, screw and centrifugal compressors. As a result, inverter compressor control is applied across our entire product range, providing more comfort and ensuring a more efficient system. Scroll compressor for capacity control Daikin's compact scroll-type compressors are suitable for use with R32 refrigerant, to ensure constant reliability and high efficiency throughout their life. Optimized for use in small and medium capacity systems, Scroll compressors are combined with air and water cooled chillers. Characteristics: › Simple, compact and robust › Absence of valves and swing joint mechanisms, to ensure maximum reliability › Constant compression, to ensure a low level of energy consumption › Greater compression efficiency thanks to the absence of volumetric re-expansion › Low noise › Low starting current Advantages: › Choosing a product in R32 reduces the environmental impact by 68% compared to R410A and leads directly to lower energy consumption thanks to its high energy efficiency › Chillers with Inverter › Hermetically sealed inverter compressor › New casing of the outdoor unit › Separate MMI-2 controller for indoor installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.361,00
-
DAIKIN Mini Chiller Daikin Inverter Heat Pump Air Water Ewya-014dw1p From 12.8 Kw Three-Phase R-32 Class A +++
OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWYA014DW1P Power : 12.8 kW Energy efficiency SEER: 5.71 SCOP : 4.70 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 12.8 kW Heating Capacity: 12.0 kW Cooling absorption: 4.06 kW Heating absorption: 2.46 kW Air Flow : 70.4 ~ 85.0 m 3 /min Water flow rate: 34.4 l/min Sound power level : 69 dB(A) Sound pressure level : 50.8 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating Range Air Cooling: -10° ~ 43°C Heating: -25° ~ 25°C Operating Range Water Cooling: -5° ~ 22°C Heating: 9° ~ 60° C Installation data Plumbing Pipe Diameter: 25.4 mm (1") male Pipe connections diameter : 25.4 mm (1") Dimensions and weight Dimensions (HxWxD): 1053x1500x650 mm Indoor Unit Weight: 164 Kg Daikin Mini Chiller Systems Small systems for the production of chilled or heated water Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Furthermore, with the introduction of the European SCOP (seasonal COP ) indicator, the adoption of modulating systems and Inverter technology makes it possible to optimize consumption even in winter, in line with the best requirements of the new energy index. What is SEER? 'seasonal energy efficiency ratio' ( SEER ) means the seasonal energy efficiency ratio of the unit representative of the entire cooling season, calculated as the reference annual cooling demand divided by the annual electricity consumption for cooling purposes. New parameter representative of the seasonal efficiency of the product . The SEER value is calculated over a period of 2600 operating hours during the year. Of these, only 30 hours of full load operation result. Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Compressors developed and manufactured by Daikin Daikin has always been at the forefront of compressor technology development and now offers a complete range of swing, scroll, screw and centrifugal compressors. As a result, inverter compressor control is applied across our entire product range, providing more comfort and ensuring a more efficient system. Scroll compressor for capacity control Daikin's compact scroll-type compressors are suitable for use with R32 refrigerant, to ensure constant reliability and high efficiency throughout their life. Optimized for use in small and medium capacity systems, Scroll compressors are combined with air and water cooled chillers. Characteristics: › Simple, compact and robust › Absence of valves and swing joint mechanisms, to ensure maximum reliability › Constant compression, to ensure a low level of energy consumption › Greater compression efficiency thanks to the absence of volumetric re-expansion › Low noise › Low starting current Advantages: › Choosing a product in R32 reduces the environmental impact by 68% compared to R410A and leads directly to lower energy consumption thanks to its high energy efficiency › Chillers with Inverter › Hermetically sealed inverter compressor › New casing of the outdoor unit › Separate MMI-2 controller for indoor installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.440,00
-
DAIKIN Mini Chiller Daikin Inverter Heat Pump Air Water Ewya-011dw1p From 11 Kw Three-Phase R-32 Class A +++
OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWYA011D1WP Power : 11.0 kW Energy efficiency SEER: 5.79 SCOP: 4.73 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 11.6 kW Heating Capacity: 10.6 kW Cooling absorption: 3.56 kW Heating absorption: 2.18 kW Air flow rate : 55.8 ~ 70 m 3 /min Water flow rate: 30.3 l/min Sound power level : 67 dB(A) Sound pressure level : 47.7 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating Range Air Cooling: -10° ~ 43°C Heating: -25° ~ 25°C Operating Range Water Cooling: -5° ~ 22°C Heating: 9° ~ 60°C Installation data Plumbing Pipe Diameter: 25.4 mm (1") male Pipe connections diameter : 25.4 mm (1") Dimensions and weight Dimensions (HxWxD): 1053x1500x650 mm Indoor Unit Weight: 164 Kg Daikin Mini Chiller Systems Small systems for the production of chilled or heated water Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Furthermore, with the introduction of the European SCOP (seasonal COP ) indicator, the adoption of modulating systems and Inverter technology makes it possible to optimize consumption even in winter, in line with the best requirements of the new energy index. What is SEER? 'seasonal energy efficiency ratio' ( SEER ) means the seasonal energy efficiency ratio of the unit representative of the entire cooling season, calculated as the reference annual cooling demand divided by the annual electricity consumption for cooling purposes. New parameter representative of the seasonal efficiency of the product . The SEER value is calculated over a period of 2600 operating hours during the year. Of these, only 30 hours of full load operation result. Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Compressors developed and manufactured by Daikin Daikin has always been at the forefront of compressor technology development and now offers a complete range of swing, scroll, screw and centrifugal compressors. As a result, inverter compressor control is applied across our entire product range, providing more comfort and ensuring a more efficient system. Scroll compressor for capacity control Daikin's compact scroll-type compressors are suitable for use with R32 refrigerant, to ensure constant reliability and high efficiency throughout their life. Optimized for use in small and medium capacity systems, Scroll compressors are combined with air and water cooled chillers. Characteristics: › Simple, compact and robust › Absence of valves and swing joint mechanisms, to ensure maximum reliability › Constant compression, to ensure a low level of energy consumption › Greater compression efficiency thanks to the absence of volumetric re-expansion › Low noise › Low starting current Advantages: › Choosing a product in R32 reduces the environmental impact by 68% compared to R410A and leads directly to lower energy consumption thanks to its high energy efficiency › Chillers with Inverter › Hermetically sealed inverter compressor › New casing of the outdoor unit › Separate MMI-2 controller for indoor installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.855,00
-
DAIKIN Mini Chiller Daikin Inverter Heat Pump Air Water Ewya-009dw1p From 9 Kw Three-Phase R-32 Class A +++
OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWYA009DW1P Power : 9.0 kW Energy efficiency SEER: 5.62 SCOP: 4.82 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 9.35 kW Heating Capacity: 9.37 kW Cooling absorption: 2.79 kW Heating absorption: 1.91 kW Air flow rate : 48 ~ 63 m 3 /min Water flow rate: 26.9 l/min Sound power level : 65.5 dB(A) Sound pressure level : 44 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating Range Air Cooling: -10° ~ 43°C Heating: -25° ~ 25°C Operating Range Water Cooling: -5° ~ 22°C Heating: 9° ~ 60°C Installation data Plumbing Pipe Diameter: 25.4 mm (1") male Pipe connections diameter : 25.4 mm (1") Dimensions and weight Dimensions (HxWxD): 1053x1500x650 mm Indoor Unit Weight: 164 Kg Daikin Mini Chiller Systems Small systems for the production of chilled or heated water Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Furthermore, with the introduction of the European SCOP (seasonal COP ) indicator, the adoption of modulating systems and Inverter technology makes it possible to optimize consumption even in winter, in line with the best requirements of the new energy index. What is SEER? 'seasonal energy efficiency ratio' ( SEER ) means the seasonal energy efficiency ratio of the unit representative of the entire cooling season, calculated as the reference annual cooling demand divided by the annual electricity consumption for cooling purposes. New parameter representative of the seasonal efficiency of the product . The SEER value is calculated over a period of 2600 operating hours during the year. Of these, only 30 hours of full load operation result. Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Compressors developed and manufactured by Daikin Daikin has always been at the forefront of compressor technology development and now offers a complete range of swing, scroll, screw and centrifugal compressors. As a result, inverter compressor control is applied across our entire product range, providing more comfort and ensuring a more efficient system. Scroll compressor for capacity control Daikin's compact scroll-type compressors are suitable for use with R32 refrigerant, to ensure constant reliability and high efficiency throughout their life. Optimized for use in small and medium capacity systems, Scroll compressors are combined with air and water cooled chillers. Characteristics: › Simple, compact and robust › Absence of valves and swing joint mechanisms, to ensure maximum reliability › Constant compression, to ensure a low level of energy consumption › Greater compression efficiency thanks to the absence of volumetric re-expansion › Low noise › Low starting current Advantages: › Choosing a product in R32 reduces the environmental impact by 68% compared to R410A and leads directly to lower energy consumption thanks to its high energy efficiency › Chillers with Inverter › Hermetically sealed inverter compressor › New casing of the outdoor unit › Separate MMI-2 controller for indoor installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.720,00
-
DAIKIN Mini Chiller Daikin Heat Pump Inverter Air Water Ewya-009dv3p From 9 Kw Single-Phase R-32 Class A +++
OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWYA009DV3P Power : 9.0 kW Energy efficiency SEER: 5.62 SCOP: 4.82 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 9.35 kW Heating Capacity: 9.37 kW Cooling absorption: 2.79 kW Heating absorption: 1.91 kW Air flow rate : 48 ~ 63 m 3 /min Water flow rate: 26.9 l/min Sound power level : 65.5 dB(A) Sound pressure level : 44 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating Range Air Cooling: -10° ~ 43°C Heating: -25° ~ 25°C Operating Range Water Cooling: -5° ~ 22°C Heating: 9° ~ 60° C Installation data Plumbing Pipe Diameter: 25.4 mm (1") male Pipe connections diameter : 25.4 mm (1") Dimensions and weight Dimensions (HxWxD): 1053x1500x650 mm Indoor Unit Weight: 164 Kg Daikin Mini Chiller Systems Small systems for the production of chilled or heated water Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Furthermore, with the introduction of the European SCOP (seasonal COP ) indicator, the adoption of modulating systems and Inverter technology makes it possible to optimize consumption even in winter, in line with the best requirements of the new energy index. What is SEER? 'seasonal energy efficiency ratio' ( SEER ) means the seasonal energy efficiency ratio of the unit representative of the entire cooling season, calculated as the reference annual cooling demand divided by the annual electricity consumption for cooling purposes. New parameter representative of the seasonal efficiency of the product . The SEER value is calculated over a period of 2600 operating hours during the year. Of these, only 30 hours of full load operation result. Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Compressors developed and manufactured by Daikin Daikin has always been at the forefront of compressor technology development and now offers a complete range of swing, scroll, screw and centrifugal compressors. As a result, inverter compressor control is applied across our entire product range, providing more comfort and ensuring a more efficient system. Scroll compressor for capacity control Daikin's compact scroll-type compressors are suitable for use with R32 refrigerant, to ensure constant reliability and high efficiency throughout their life. Optimized for use in small and medium capacity systems, Scroll compressors are combined with air and water cooled chillers. Characteristics: › Simple, compact and robust › Absence of valves and swing joint mechanisms, to ensure maximum reliability › Constant compression, to ensure a low level of energy consumption › Greater compression efficiency thanks to the absence of volumetric re-expansion › Low noise › Low starting current Advantages: › Choosing a product in R32 reduces the environmental impact by 68% compared to R410A and leads directly to lower energy consumption thanks to its high energy efficiency › Chillers with Inverter › Hermetically sealed inverter compressor › New casing of the outdoor unit › Separate MMI-2 controller for indoor installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.300,00
You have seen 192 out of 206 products