Open Chamber Boiler Riello Residence 24 KI DGT N Technical features Maximum pressure 6 Minimum pressure 0.15 Quantity of hot water at ∆t 25°C 13.7 Domestic hot water temperature selection range (± 3°C) 37-60 Minimum domestic water flow rate 2 Rated power Pnominal 24 kW At 30% of the nominal heat output and at a low temperature regime(**) P1 7.1 Declared load profile XL RESIDENCE KI DGT No RESIDENCE KI DGT N is a gas-fired wall-mounted boiler for space heating and sanitary use having a stainless steel plate exchanger. It is an electronically controlled boiler with automatic ignition, ionisation flame control, modulating heating and DHW. It has an open combustion chamber and, according to the flue gas accessory used, is classified in the B11BS category. Switching of the heating and DHW modes takes place with an electric three-way valve which is in DHW in the rest position. To ensure correct water flow in the exchanger, the boiler is equipped with an automatic by-pass; it is also complete with security, expansion and distribution accessories. The RESIDENCE KI DGT N boiler is equipped with: microprocessor management and control with visualized self-diagnosis anti-blocking circulator and three-way valve first level antifreeze (suitable for indoor installations) predisposition for room thermostat or time programmer or zone valves digital display indicating the operating temperature and fault codes. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO SUPEREVODENS 28S CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW ERP Model: SuperEVOdens 28S Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 29 kW Heating/DHW maximum useful power: 28.3 kW Yield name 60°/80°C: 97.7% Yield at 30% load: 98.9% High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) NOx class 2 Weighted NOx: 158 mg/kWh Minimum/maximum heating temperature: 40/85°C Minimum/maximum heating pressure 3.0/0.3 bar Expansion tank capacity 8 l (total) Minimum/maximum domestic hot water temperature 35/60°C Maximum flow rate (ΔT=25 K)/(ΔT=35 K): 16.3/11.6 l/min Specific sanitary flow rate (ΔT=30 K): 13.6 l/min Voltage / Power at nominal heat input V~/ W 230/93 IPX4D degree of protection Dimensions HxWxD 803x400x350; 44 kgs Power supply: methane or LPG Standard Digital electronic room thermostat Boiler support bracket and paper template Condensate collection siphon Quick instruction to the user SuperEVO dens SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution system for heating. SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers. Characteristics: High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Copper lamellar primary heat exchanger with large exchange surface and double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel Insulated mini-tank kept in temperature by the boiler (selectable function) to significantly reduce waiting times in the production of domestic hot water High efficiency pump with low energy consumption Digital control panel with backlit display Electronic card for: - Restart frequency adjustment - Adjustable primary circuit thermal inertia disposal - Circulator mode selection - Circulator anti-seize - Antifreeze safety - Chimney sweep function Integrated automatic by-pass 8 liter expansion tank Immunity to radio interference Magnetic sanitary flow switch Absolute heating pressure switch IPX4D degree of protection Possibility of integrating SuperEVOdens with Savio solar systems using the optional solar kit Propane air supply, methane and LPG High circulation primary exchanger It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators. Heat recovery   The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler correctly discharges the condensate. Command panel Summer / winter / off setting Heating temperature regulator DHW temperature regulator Gauge Fault diagnostics and lockout status shown on display Heating and DHW temperature shown on the display Reset button Easily accessible electrical connections Arrangement for external probe Arrangement for remote control Thermoregulation By connecting the external probe (optional) directly to the boiler, climatic regulation can be used. SuperEVOdens will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Chaffoteaux PIGMA GREEN 30 L Condensing Boiler complete with flue kit cod. 3310402 Model PIGMA GREEN L 30 EU Natural gas Heating maximum thermal power (DHW) kW 27.3 (29.3) Heating capacity Energy class Condensation **** Nominal heat input max/min (Hi) Qn kW 28/6.5 Useful heating power 80º C/ 60º C max/min kW 27.3/6.3 Useful heating power 50º C/ 30º C max/min kW 29.7/6.8 Efficiency at nominal power 60/80 Hi % 97.6 Efficiency at nominal power 30/50 Hi % 106 Capacity of the expansion tank l 10 Energy efficiency class for space heating * Domestic hot water DHW comfort level (EN 13203) *** Max/min nominal heat input in DHW (Hi) Qn kW 30/6.5 Max/min useful power in DHW regime Pn kW 29.3/6.3 Specific flow rate in accordance with EN 625 at Δt 30ºC l/m 14.1 Energy efficiency class for hot water production* XL withdrawal profile Nox class 5 Electrical data Supply voltage V 230/50 Maximum absorbed power W 78 Electrical protection degree IP X5D Dimensions and weight Height x Width x Depth mm 745 x 400 x 388 Weight kg 35 PIGMA GREEN L The boiler designed for replacement, in particular for medium-large surface and older systems (with large quantities of water). Thanks to the high-efficiency circulator with continuous modulation and 7-metre head, it allows for perfect adaptation of the power based on the temperature of the system, guaranteeing maximum performance and low electricity consumption with maximum silence. > HEALTH COMFORT • Sanitary heat exchanger in stainless steel oversized 20 plates. • Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. • Flow rate 16.8 l/min with ΔT = 25ºC. • Programmable comfort function. > COMFORT IN HEATING • Efficiency up to 108% with energy savings up to 35%. • 4-star combustion efficiency in compliance with the EN92/42 standard. • Modulation ratio 1:4. • SRA function, automatic boiler regulation system based on heating requirements. • Reduced polluting emissions, NOx Class 5. • High efficiency circulator with continuous modulation and 7 meter head. • Expansion tank with nominal capacity of 10 LT. • Operation management and programming using the Expert Control system manager: operating modes and temperatures, self-diagnosis, daily and weekly programming, adjustment information and history of the latest failures. • Backlit LCD display with display: history, self-diagnosis, operating temperatures. > COMFORT OF USE AND INSTALLATION • Compatible with the Expert Control system manager. • New intuitive electrical connections. • Differentiated climatic thermoregulation of 3 circuits, according to the ambient and external temperature. • Easier starting: automatic purge function and directly accessible combustion regulation. • Can be installed in partially protected places. > ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT • Up to 25% energy savings in combination with Expert Control and the SRA function. • Up to 35% energy saving by combining Expert Control, the SRA function, the external probe and the radiant floor. • 40% reduction in CO2 emissions*. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: in the absence of the product, the new VMW 26 CS model will be shipped VAILLANT ecoTEC PLUS condensing BOILER VMW 256/5-5+ Technical features For heating and domestic hot water production Forced draft sealed chamber Heating efficiency class A Sanitary efficiency class A Sanitary load profile XL Nominal thermal power in DHW 25.0 kW Efficiency at 30% 110.0 Performance stars (Dir. 92/42CEE) **** NOx class 5 Degree of protection IP X4 D Expansion vessel capacity 10 l Domestic hot water production (ΔT = 30K) 11.9 l/min Power supply V/Hz 230/50 Dimensions HxWxD: 720-338-440 mm; 36 kgs Power supply: Natural gas or LPG (Supplied with convertible natural gas through the assistance centre) General characteristics Vaillant condensing boiler With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year.   ecoTEC PLUS VMW+ The most efficient and versatile combi condensing boiler there is. ecoTEC plus. Wall-mounted condensing boilers capable of always guaranteeing maximum efficiency and maximum comfort. This is German quality. ecoTEC plus has always been the most popular Vaillant boiler. Today it guarantees even lower consumption, a further increase in efficiency and versatility and the certainty of immediate sanitary comfort without jolts.   The best of Vaillant technology to satisfy every need   Every component and every function of ecoTEC plus has been designed to combine efficiency and reduced consumption in favor of greater respect for the environment. ecoTEC plus self-adapts to your needs by always choosing the most economical solution, mixing the right amount of gas and air; all this with an electrical consumption of less than 2 Watts (less than half of a radio in operation). The combined version satisfies all comfort needs, guaranteeing both constant hot water without sudden changes in temperature and a comfortable climate. Sanitary comfort, in particular, is managed by the efficient Aqua Comfort pre-heating system which, thanks to 4 probes, controls, verifies and guarantees the immediate delivery of hot water always at the same temperature. Lots of hot water, immediately, without sudden changes is the real comfort offered by ecoTEC plus. From today it can also be installed outdoors where the climate is mild even in winter. In fact, the boiler has a standard antifreeze device which allows it to resist down to -5°C.   To have heating and domestic hot water in a single solution   The VMW ecoTEC plus condensing wall-mounted boilers combine the production of domestic hot water with the heating function. Unlike all the other boilers, the Vaillant ELGA system is installed inside, which expands the modulation range, but above all electronically regulates and monitors combustion to always ensure the lowest gas consumption, guaranteeing maximum efficiency. The boiler adjusts itself automatically and continuously, as if it were assisted every 30 seconds. In addition to a new, simpler and more intuitive design, the new electronics together with a very high efficiency pump make ecoTEC plus VMW+ the wall-mounted condensing boiler that consumes less on the European market. the ecoTEC plus VMW+ boiler is compatible with all Vaillant components and accessories already on the market. The dimensions are reduced 70cm high, 44cm wide and 35cm deep (identical to the previous version), the weight has been optimized making installation easier.   and with vSMART... and go to Class A+ (Optional).   All models of the ecoTEC plus VMW+ range have an efficiency etas = 94%. For this reason, if combined with a class VI thermoregulation (such as vSMART), they reach a system efficiency of 98% and therefore the ErP energy class in heating A+. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION METHANE, LPG AND PROPAN AIR OPERATION WITHOUT THE NEED FOR A KIT. THE TRANSFORMATION TAKES PLACE THANKS TO THE COMBUSTION CONTROL BY SELECTING THE TYPE OF GAS FROM THE TECHNICAL MENU. For information, contact the authorized assistance center in your area in advance Technical Features Model : Alteas One Net 24 Product code: 3301058 (Methane Code) Airtight chamber Energy label specifications according to European ErP directive Heating energy efficiency Class A (A+ achieved thanks to thermoregulation) Energy efficiency of health care: Class A Withdrawal Profile : XL Nominal thermal power kW 22 Annual energy consumption in heating 38 gj Annual electricity consumption 49 kWh Seasonal space heating energy efficiency % 94 Water heating energy efficiency % 86 Sound power level inside dB 49 DHW flow rate ∆T 25 °C (l/min) 14.4 Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Indoor installation and partially protected places Power supply: LPG Functionality: Integrated connectivity in the boiler HI-Comfort AUTO, Comfort, CARE functions Thermoregulation including CUBE thermostat + external probe Large display, touch interface XtraTech™ stainless steel exchanger ONE Series, the new generation of condensing boilers Serie ONE is the new generation of Ariston condensing boilers, designed down to the smallest details to guarantee maximum performance over time. New XTRATECH™ exchanger: Maximum quality XtraTech™ is the new exclusive* Ariston stainless steel exchanger , the heart of ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, higher performance. Every day, as if it were the first. Each single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and checked on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected to work for a long time even in the most critical situations. Excellent results, over time Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing your home comfort has never been so easy! Wherever you are, you can control your home climate with your smartphone. Use only the energy it needs. Easy-to-manage weekly time programming, directly from the app. Plus, choose the “savings leaf” for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app alerts your customer in case of operating problems. By signing a maintenance contract, the Assistance Center will be able to intervene in case of faults even remotely. The customer's serenity is at the heart of Ariston NET Absolute efficiency: Class A+ thermoregulation ONE condensing boilers achieve very high seasonal performances and thanks to thermoregulation they reach class A+ ! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to electronic control. Gas conversion? No problem, from the technical menu in just one touch. Total Comfort: Innovative functions to satisfy your needs ONE is equipped with an innovative set of smart functions to ensure comfort every day with minimal waste of energy. Auto Function: Patented function that allows the boiler to automatically optimize its operation, eliminating continuous switching on and off, thus minimizing stress on the components. Comfort Function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly time programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance ALTEAS ONE NET Top of the range condensing boiler, Italian design and integrated connectivity It represents the perfect combination of excellent performance and innovative design. The tempered glass front panel, the HI-tech display and the integrated connectivity make Alteas the perfect boiler for exclusive furnishing solutions. The efficiency of the boiler combines with the advantages of the Ariston NET service to control your system remotely, monitor consumption and have peace of mind thanks to a technician always at your side. All via a simple free smartphone app! New exclusive* Ariston XtraTech™ stainless steel exchanger, with high head Exchanger passage sections +142% compared to the previous version Tempered and scratch-resistant glass panel Large display, touch interface Ignition system, electronic combustion control Gas transformation from the technical menu Class A+ in heating, thanks to the Cube thermostat and external probe included as standard Modulation ratio 1:10 Ariston NET connectivity included in the boiler BusBridgeNet® communication protocol AUTO function, Comfort New CARE function, automatic reminder of routine maintenance Sound-absorbing interior panels Installation in partially protected places Flue gas exhaust 80, 60, 50 m Ecodesign Directive: from 2015 only new condensing boilers After very long negotiations, the Ecodesign regulation has been approved , which introduces a new energy labelling on the minimum efficiency standards for boilers. In particular, it provides for an energy classification from A+ to G for appliances for heating rooms and from A to G for appliances for producing domestic hot water. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes that, otherwise, would be lost in the chimney as happens in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach a yield of 106% compared to 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing boilers on the market starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their home will have to install only condensing models. Only a particular type of non-condensing boiler will continue to be produced, which is technically called an “open chamber” boiler, to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings. What is energy labelling? Water and space heating products represent approximately 30% of domestic energy consumption in Europe. Designing eco-friendly products and promoting high-performance technologies to end users in 2020 will determine: An annual energy saving equivalent to 56 million tons of oil, quantifiable as the savings obtained if the water and space heating systems of two nations as large as Italy were deactivated. From 26 September 2015, ErP regulation and energy labelling will apply in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks)¹. There are different labels, depending on the type and functions of the product (water heating or just room heating or both, and in this case the label must report both classifications). In addition to the energy class, the label provides other information that could be useful to understand which product has the lowest environmental impact (for example, power and consumption in different climate zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting multiple products and accessories in a system. In this case, a system label must be prepared in addition to the one relating to the individual product Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BAXI DUO-TEC MAX+ 33 GA CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP 2015 Technical specifications ErP energy efficiency class (heating and DHW): A Load profile: XL Sanitary nominal heat inputkW 34ÿ Heating nominal heat input kW 28.9 Sanitary nominal thermal powerkW 33 Energy efficiency(92/42/CEE)ÿ**** Efficiency 100% Pn (80-60øC): 97.8% Efficiency 100% Pn (50-30øC): 105.8% Expansion/pre-charge capacity l/bar 8/0.8 Sanitary water temperature adjustmentøC 35-60ÿ Sanitary water production T 25øC l/min 18.9 Degrees of protection: IPX5Dÿ NOx class (EN 483) 5 Dimensions (hxwxd): 760 x 450 x 345ÿmmÿ; 39.5 kgs Power supply: METHANE Features list Duo-Tec Max+ The new range of gas condensing boilersÿDuo-tec+ÿ has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models: heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40 liter storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide range of 1:7 modulationÿreduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, simple to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and of the heating. The display allows you to view all the information and set the operating parameters in immediate change. Gas Adaptive Control The innovative automatic combustion control system GAC (Gas Adaptive Control) guarantees a wide modulation range of up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the effective power dissipated by the building, avoiding excessive overheating/cooling of the building. Full modulation pumpÿ Can the circulation pump operate at maximum speed, at minimum speed in mode or automatic?: in the latter case, the speed (min./max) will be selected so that the heating delivery/return T remains constant at 20°C thus guaranteeing a significant reduction of pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also of maintenance costs Characteristics: *** of sanitary comfort(EN 13203) wide modulation ranges fine 1:7 greater efficiency and silence GAC (gas adaptive control): automatic control of combustion mini accumulator integrated in the expansion vessel (Baxi patent) digital control panel with large backlit LCD display high-efficiency circulation pump with total modulation antifreeze function IPX5D protection degree To be placed on the EU market, a productÿmustÿhave the brand,ÿthat is, comply with all the European Directives applicable to it.ÿ The ÿEcodesign and Labellingÿ Directives (eco-design and energy labelling) were created to help the EU achieve the objectives of the EU Plan 20-20-20, with a particular focus on reducing CO2 emissions by 20%, increasing energy efficiency 20% and the increase in the use of renewable energy by 20%, by 2020. For this, all heat generators for space heating, appliances for the production of DHW and systems of several of these appliances combined in combination will have to comply with the requirements for eco-design and be labelled, according to the quantity established by the implementing regulations, in order to be placed on the marketby producers. From 26 September 2015, the directives will affect all the products described above with a Pn 400 kW for eco-design and with a Pn 70 kW for labeling, destined for the markets of all countries of the European Economic Area. How is placing on the market Placing on the market is carried out by the manufacturer (by the importer from outside the EU) when the product remains available for the first time on the EU market.ÿThis happens when ownership changes to a distributor (invoice). ÿHow the placing on the market takes place Placing on the market is carried out by the manufacturer (by the importer from outside the EU) when the product remains available for the first time on the EU market.ÿThis happens when ownership changes to a distributor (invoice). ÿWhat products can be sold All products with CE marks placed on the market before 01/08 and 26/09 2015 are considered compliant and therefore salable until exhaustion. All products that will be placed on the market (sold) by the manufacturer/importer after these dates must comply with the new standards . What is a product according to ErP (Ecodesign) A device designed to operate at maximum efficiency with minimum environmental impact. To comply with this directive, the product must have Pnÿ 400 kW and as regards the hot water tanks, a volumeÿ 2000 litres. Manufacturers are obliged toÿplace on the marketÿonly ErP-compliant products with these deadlines: sinceÿAugust 1, 2015ÿonly products equipped with high efficiency pump fromÿ26 September 2015ÿonly products that meet the minimum ErP efficiency requirementsÿ Ecodesign defines the requirements that products must meet in order to be placed on the market, based on: Seasonal efficiencyÿfor heating and efficiency for DHW production based on the declared load profileÿ Emissionsÿ(NOx values)ÿ Maximum allowable noiseÿof hydronic heat pump outdoor unitsÿ What is a Combi product according to ErP An appliance (single with boiler) for heating and DHW production, already equipped with labeling with energy class information relating to a DHW loader profile. What is the energy label The labeling directive (2010/30/EU) requires the labeling of products according to a decreasing energy scale that goes from A + + + to GE An energy label is also provided for the installed system, depending on the components used (for example a boiler, DHW tank and room temperature controls). The label was created for the final consumer, providing real and comparable data, to make informed choices and targeting high-efficiency products. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

NB: THE PRODUCT IS ARRIVAL IN THE FIRST DAYS OF NOVEMBER ARISTON CONDENSING BOILER GENUS ONE NET 30 KW METHANE COMPLETE WITH FUME EXHAUST KIT Technical features Product code: 3301114 Energy label specifications according to the European ErP directive Class A heating energy efficiency (A+ achieved thanks to thermoregulation) Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input max heating kW 28.0 Max DHW nominal heat input kW 30.0 Nominal thermal power kW 27.5 Efficiency at nominal heat input (60/80°C) 98.4% Efficiency at 30% (30°C) 109.5% DHW max/min temperature °C 60 / 36 DHW flow ∆T 25 °C (l/min) 17.2 Power supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 91 Degree of protection of the electrical system IP X5D, Dimensions 24 kW mm (HxWxD) 745 x 400 x 385 Indoor installation and partially protected places Power supply: methane Functionality: CUBE S NET room thermostat Operation CNG, LPG and propane air without the need for kits. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu GENUS ONE NET Ariston excellence guaranteed for 10 years thanks to the Protezione 10 total assistance programme. Latest generation condensing boiler with integrated Wi-Fi and voice control. HEATING WITH MAXIMUM DURATION: XTRATECH HEAT EXCHANGER The new patented ExtraTech heat exchanger is the heart of the ONE condensing technology for heating, designed to guarantee performance with maximum durability over time. TOTAL COMFORT: COMPLETE CONTROL IS GUARANTEED EVERY DAY WITH THERMAL FUNCTIONS A unique set of innovative smart functions for a fast and stable heating temperature and easy customization able to satisfy every need. ALWAYS CONNECTED WITH ARISTON NET With Ariston NET it is possible to set, modify and control the heating, cooling and hot water temperature at any time, from your smartphone or PC, wherever you are. DISCOVER A MASTERPIECE OF ITALIAN STYLE The improved design of the ONE Series is based on innovative lines, new materials and technological user interfaces for an even more comfortable experience. The touch screen display is a solution that allows easy management of the temperature, while the compact structure has been redesigned with internal components and a layout designed for easy access even with reduced dimensions. With the front panel in tempered glass, scratch resistant and easy to clean, Alteas ONE is made to withstand high temperatures and to always be super safe. NEW PER4MANCE SYSTEM 4 technologies for exclusive performance: NEW XTRATECH™ EXCHANGER: MAXIMUM QUALITY. ABSOLUTE EFFICIENCY: ENERGY CLASS A+. ALWAYS CONNECTED WITH ARISTON NET. FULL CONTROL, TOTAL COMFORT. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BAXI LUNA DUO-TEC+ 28 GA LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 28.9 Heating nominal heat input kW 24.7 Sanitary nominal thermal power kW 28 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.6% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 763 x 450 x 345 mm ; 38.5 kgs Power supply: LPG Luna Duo-Tec+ Wall mounted gas condensing boilers ideal for both new build and replacement The new Duo-tec+ range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as high efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models : heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40-litre storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide modulation range 1:7 the reduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Total modulation pump The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control High efficiency circulation pump with total modulation Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BAXI LUNA3 SILVER SPACE HT 240 CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT: Wall mounted gas condensing boilers for heating and DHW production; for outdoors. Technical specifications Domestic hot water/heating nominal heat input: 24.7 kW Domestic hot water/heating nominal heat output:ÿ24 kW Energy Efficiency(92/42/EEC): **** Average efficiency (DIN 4702-T8): 109.8%ÿ 30% yield: 107.6ÿ% Domestic hot water production T 25øC: 13.8ÿl/min Minimum domestic hot water flow rate: 2 l/minÿ Minimum operating temperature: -15°C Expansion/pre-charge capacity 8/0.5ÿl/bar Maximum length of the concentric 60/100 exhaust-intake tube: 10m Maximum length of the 80 split exhaust-intake pipe: 80 m NOx class (EN 483): 5 Degrees of protection IPX5D Rated Electric Power: 150W Dimensions (hxwxd): 830x550x250ÿmmÿ; 44 kgs Power supply: METHANE Features list LUNA3 SILVER SPACE HT Wall-hung gas condensing boilers for heating and DHW production; for outdoors. Power range fromÿ24 kW Outdoor installation, minimum operating temperature: -15°C Controllremot with LCD display, with chronothermostat function for climate control unit, supplied as standard Arrangement for the management of an implantmist (high-low temperature) Automatic plant loading system Arrangement for combination with the integrated Baxi solar system Standard climate control (with optional external probe) Maximum protectionÿ Luna3 Silver Space HT boilers are certified with IPX5D degrees of protection which guarantees protection of the boiler's electrical components from water jets.ÿ Total gel devices Luna3 Silver Space HT boilers are particularly suitable for installation outside buildings as they have an anti-freeze function. heating and sanitary which allow the boiler to operate down to -15°C. When the temperature of the water in the circuits falls below 5°C, the sophisticated electronics of the boiler activates the anti-freeze function which automatically ignites the burner, avoiding water freezing phenomena. Special function The user can activate the SHOWER BUTTON directly from the control panel, thus momentarily varying the temperature of the domestic hot water, which after the interval will return to the usual value. Solar connection The ÿLuna3 Silver Space HT boilers are designed to be combined with the Baxi integrated solar system. The sophisticated electronics of ÿLuna3 Silver Space HT was designed to allow the boiler to be switched on only when the temperature of the water coming from the solar storage tank is reached ÿ lower than that requested. For installation, follow the warnings indicated in the instruction manual. External probe The ÿLuna3 Silver Space HT boilers are set up for climate control (external probe available as an option) to adapt theÿ system delivery temperature as a function of the outside temperature. Series features: Hydraulic system: Electric three-way diverter valve Pre-mix burner in stainless steel Water/fumes exchanger in stainless steelÿwith external cladding in composite material Increased sanitary heat exchanger in stainless steelÿwhich allows the boiler to condense even inÿsanitary operation Modulating fan with electronic speed variation Automatic by-pass Circulation pump with adjustable speed, low consumption, built-in deaerator Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve 3 bar Thermoregulation system: Climatic adjustment as standardÿ(with external probe available as an option) Arrangement for connection to a zone system Heating programmer and ambient probeÿintegrated in the control panel Control system: Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switches which blocks the gas in case of water shortage NTC safety probe for fume overtemperature control Controlltemperature through NTC probes Total gel devices Electronic thermometer Heating circuit pressure gauge Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features CNG code: 20095434 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Seasonal heating efficiency % 93 Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 20/25 kW Nominal heating thermal power: 19.50 kW Classification European Directive EEC 92/42: **** Efficiency at rated power: 97.5% Efficiency at reduced load (30%): 102.2% Max electric power heating Watt 69 Electrical protection degree IP X5D Expansion tank capacity 8 litres Quantity of hot water with Δt=25°C: 14 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 715x405x248 ; 28kg METHANE power supply   Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control). General characteristics HELLO GREEN ErP Ciao Green: high energy efficiency, low gas consumption and low emissions. The entry into force of the European ErP Directive (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Mandatory labeling provides greater transparency on the characteristics of products that can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2) by 20%, increasing by 20% the use of renewable energies and reduce energy consumption by 20% in EU countries. Condensing exchanger The innovative Beretta compact aluminum condensing exchanger is assembled with a brazing production process in a controlled atmosphere. In addition to allowing a more uniform distribution of heat, aluminum offers a high resistance to corrosion for the benefit of a longer duration over time. Aluminum is also chosen for its lightness, excellent conductivity, mechanical resistance, reliability and recyclability. The condensing exchanger makes it possible to recover a large part of the heat from the fumes by reducing losses in the chimney, and a large part of the latent heat, reaching a four-star energy efficiency value (according to European Directive EEC 92/42). The premix burner optimizes the combustion mixture by reducing NOx emissions to values ​​that place the boiler in Class 5, the highest according to the European Directive EN 677. Universal installation Ciao Green is designed to be installed outdoors in partially protected places or recessed thanks to the dedicated accessories and board anti-freeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit together with the siphon antifreeze heater kit. If the boiler is installed outside, without embedding, the lower cover is required for greater protection. The management The electronic panel is the brain of boiler management. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. A liquid crystal display and LEDs provide information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Characteristics: ErP boilers with synchronous modulating pump with low energy consumption (EEI≤0.20) Designed according to the ecodesign indications provided for by the European ErP Directive Energy Class > heating (class A) > DHW profile XL (class A) Seasonal heating efficiency 93% Aluminum condensing exchanger, two versions of 25 kW and 29 kW combined and one 25 kW heating only Designed following the ecodesign indications of the European ErP Directive Class 5 according to the UNI EN 483 European Standard It can also be installed externally and recessed through the adoption of special kits (optional) Display for viewing temperature and diagnostic codes IPX5D electrical protection degree Prepared for connection to the remote control (optional) Standard thermoregulation (optional external probe) Plumbing fittings, gas and sanitary taps (optional) Antifreeze kit available up to -10°C (optional) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FERROLI BLUEHELIX K 50 32 Kw METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Characteristics: Seasonal space heating energy efficiency class A Water heating energy efficiency class A Declared load profile XXL Nominal thermal power 29 kW DHW thermal capacity 32 kW Auxiliary electricity consumption at full load: 0.054 kW Sound power level within 55 dB Dimensions (HxWxD) 800 x 600 x 420 *Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre BLUEHELIX K50 32 EFFICIENCY, RATIONALITY AND ROBUSTNESS New series of condensing boilers with which FERROLI intends to satisfy the increasingly stringent limits on energy consumption required by recent regulations. The range of generators has been designed with the new patented AISI 316 TI stainless steel exchanger capable of guaranteeing energy efficiency and performance, both in heating and in the supply of domestic hot water, at the top of its category, in compliance with the new directives ErP for eco-friendly design and labelling. CHARACTERISTICS Boiler body with the new patented primary exchanger in thick AISI 316 TI stainless steel Production of domestic hot water with 50-litre stainless steel domestic hot water storage tank Total premix burner in stainless steel Electronic flame modulation both in heating and DHW Digital control panel Can be combined with the modulating remote timer control Low consumption modulating heating pump (Erp Ready - Class A) Refined design and compact size Casing painted in white by anaphoresis with epoxy powders 3-star certified comfort in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe Digital flame control with three re-ignition attempts in case of operation due to lack of flame detection (methane model) Arrangement for recirculation attachments Standard by-pass Place of installation: also for outdoors in a partially protected place up to - 5 ° C as standard TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix K 50, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W. The low-consumption circulator installed in the Bluehelix K 50 has a variable flow rate, with ΔT control. The advantages o ered are many, including: - System start-up from cold: faster start-up with full control of the thermal load on the components - Permanent maintenance of temperature equilibrium conditions, once the set point has been reached - Better operation in extreme conditions (e.g. at minimum power), reduction of on-oFF states - Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems ..ROBUST Others are the merits attributable to the circulator chosen for Bluehelix K 50: - The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator. - Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity. - Self-protection function in case of overheating - Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and tear from frequent on-off cycles. COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. > SLIDING TEMPERATURE OPERATION With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. > ANTI-LEGIONELLA FUNCTION In order to keep the storage cylinder in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. > ANTI-BLOCK FUNCTION In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate operation for a few seconds. > ANTIFREEZE FUNCTION In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. > ECONOMY/COMFORT FUNCTION By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available In case of unavailability, the new DIVATECH D LNC 24 model will be supplied Technical features Model : Divaproject C24 Power supply: methane Performance Energy efficiency class in heating: C DHW energy efficiency class: A Heating nominal heat output : 7.0 ~ 23.5 kW Heat output : 8.3 ~ 25.8 kW Domestic useful thermal power: 23.5 kW Efficiency : 91 % Maximum production of domestic hot water Δt 25°C : 13.4 l/min Maximum production of domestic hot water Δt 30°C : 11.2 l/min Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 27.0 kg Ferroli Divaproject Boiler Wall mounted boilers with instantaneous DHW production with double exchanger, open chamber, natural draft The Divaproject c24 by Ferroli is the cheapest solution for replacing open chamber boilers. Built to be installed outdoors in partially protected places and prepared for integration with a solar panel system. It has an excellent quality-price ratio and is entirely Made in Italy with a 2-year guarantee. The cheapest in its category Arrangement for solar systems Eco-comfort system for rapid domestic hot water production High efficiency low consumption circulator (class A) Ideal for residential homes up to 120 m2 2 Year Warranty Divaproject is a heat generator for heating and instant domestic hot water production. The series has been designed in each of its components to have top performance in its category while maintaining characteristics of simplicity and compactness. The control electronics allow for easy and functional combination with solar collector systems. The series includes two models: C24 and C30 The boiler is designed to operate on natural gas and LPG or even on propane air by means of a special transformation. The efficiency of Divaproject is the maximum for its category, certified at 3 stars according to the 92/42 EEC Directive for energy classification Components Expansion vessel Combustion chamber Copper primary exchanger Atmospheric burner Sanitary exchanger Modulating gas valve Motorized 3-way valve Boiler control Control panel and functions Divaproject's control and management electronics allow the user to customize the operation of the appliance in order to manage environmental comfort according to one's needs. The control panel with the adjustment knobs makes the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive Remote control "ROMEO" timer Divaproject boilers can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. The ROMEO series consists of 4 models, respectively with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With ROMEO you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. With solar systems Sun Easy function Divaproject boilers have been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously controls the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user Comfort and Safety Functions Eco-Comfort function In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Antifreeze function Even in stand-by mode, i.e. in the absence of a heat request, if a water temperature of 5°C is detected, it activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Post-circulation device All models are equipped with this particular timed device which allows, after the burner has been switched off in heating mode, to recover all the heat accumulated due to thermal inertia in the exchanger, transferring it to the radiators and therefore to the rooms to be heated Circulation anti-blocking device After 24 hours of inactivity, the boiler circulator is automatically started for about 5 seconds to prevent it from blocking after a long period of inactivity. Strengths > Compact geometry primary heat exchanger entirely in copper > Instant production of domestic hot water with dedicated plate exchanger > Simple and complete control panel, LED user interface > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system > Combustion chamber in anti-corrosion aluminized sheet, internally insulated with ecological fiber and burner in AISI 304 stainless steel > Can be combined with the modulating remote timer control > Casing painted white by anaphoresis with epoxy powders > Compact dimensions and low weight > Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card > Adjustable post-circulation after the heating phase > ECO/COMFORT system for rapid production of domestic hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less