icon Water Booster Group With Pressure Switches Wilo Three-Phase P2 0.75 Kw Coe-2mhil305-Dm/Bc 2982793 | CaldaieMurali

Water Booster Group With Pressure Switches Wilo Three-Phase P2 0.75 Kw Coe-2mhil305-Dm/Bc 2982793

Description

Water booster set with Wilo three-phase P2 pressure switches 0.75 kW COE-2MHIL305-DM/BC 2982793


General characteristics

  • Brand: Wilo
  • Model: COE-2MHIL305-DM/BC
  • Code: 2982793

Data sheet

Hydraulic data

  • Supply pressure: 6 bar
  • operating pressure max. p: 10 bars
  • Pressure-side pipe connection DNd: G 2
  • Pipe connection on the suction side DNs: G 2
  • Number of pumps: 2
  • Number of standby pumps: 0
  • Number of service pumps: 2
  • Fluid temperature min. Tmin: 5 °C
  • max temperature temperature Tmax: 55 °C
  • ambient temperature min. Tmin: 0 °C
  • ambient temperature max. Tmax: 40°C

Engine data

  • Mains power supply: 3~400V, 50Hz
  • Voltage tolerance: ±10%
  • P2 motor rated power: 0.75 kW
  • Rated Current IN: 1.95A
  • Nominal speed n: 2900 1/min
  • Insulation class: F
  • Degree of protection: IP54
  • Engine efficiency ?m 50% ?M 50%: 79.5%
  • Engine efficiency ?m 75% ?M 75%: 80.7%
  • Engine efficiency ?m 100% ?M 100%: 80.7%

Materials

  • Pump body: Cast iron
  • Impeller: PPE/PS-GF30
  • Shaft: Stainless steel
  • Mechanical seal: Q1BE3GG
  • Gasket material: EPDM
  • Manifold material: 1.0026, zinc plated

Description

Water supply system with 2 fixed performance high head centrifugal pumps, mounted in parallel and arranged horizontally, in the version with ventilated motor of the MHIL series, with normal suction. Ready for connection with stainless steel collectors, mounted on plinth, equipped with a BC command device.

For fully automatic water supply and pressure boosting in residential buildings and small businesses.

For pumping drinking water and clean industrial water, as well as other aqueous solutions which do not chemically or mechanically attack the materials used and which do not contain abrasive or fibrous substances.

Product specificity/advantages

• High operational safety thanks to the system with two horizontal MHIL multistage pumps with stainless steel hydraulic system

• High-efficiency EC motor with IE3 class for three-phase motors from 0.75 kW and above

• Drinking water approval (DHW) for pumps with wetted parts made of stainless steel

• Easy to use thanks to the Basic Control command station with all the necessary functions

Equipment/function

  • For each system, two pumps of the MHIL 3 to MHIL 5 series with standardized motor IE3 for 3~ motors and IE1 for 1~ motors
  • Wetted parts are corrosion resistant
  • Base in galvanized steel
  • Galvanized steel manifolds
  • Shut-off valve on the suction and discharge side of each pump
  • Check valve on the discharge side of each pump
  • Pressure switch, discharge side
  • Pressure gauge, delivery side
  • Optional protection against water shortage, suction side
  • Automatic pump control specific for the management of fixed performance pumps with the control unit

BasicControl , housed in a plastic case.

The electromechanical technology used guarantees the functions required for operation. Start/stop of pumps by pressure switch; protection against lack of water, motor protection switch, cyclical pump switching, delay in switching off the pumps. An LED indicator provides information on any alarms and on the operation of the pumps and has an operating mode selector.


Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Water Booster Group With Pressure Switches Wilo Three-Phase P2 0.75 Kw Coe-2mhil305-Dm/Bc 2982793

Product form

Water booster set with Wilo three-phase P2 pressure switches 0.75 kW COE-2MHIL305-DM/BC 2982793 General characteristics Brand: Wilo Model: COE-2MHIL305-DM/BC Code:... Read more

€1.330,00 Incl. VAT

    Description

    Water booster set with Wilo three-phase P2 pressure switches 0.75 kW COE-2MHIL305-DM/BC 2982793


    General characteristics

    • Brand: Wilo
    • Model: COE-2MHIL305-DM/BC
    • Code: 2982793

    Data sheet

    Hydraulic data

    • Supply pressure: 6 bar
    • operating pressure max. p: 10 bars
    • Pressure-side pipe connection DNd: G 2
    • Pipe connection on the suction side DNs: G 2
    • Number of pumps: 2
    • Number of standby pumps: 0
    • Number of service pumps: 2
    • Fluid temperature min. Tmin: 5 °C
    • max temperature temperature Tmax: 55 °C
    • ambient temperature min. Tmin: 0 °C
    • ambient temperature max. Tmax: 40°C

    Engine data

    • Mains power supply: 3~400V, 50Hz
    • Voltage tolerance: ±10%
    • P2 motor rated power: 0.75 kW
    • Rated Current IN: 1.95A
    • Nominal speed n: 2900 1/min
    • Insulation class: F
    • Degree of protection: IP54
    • Engine efficiency ?m 50% ?M 50%: 79.5%
    • Engine efficiency ?m 75% ?M 75%: 80.7%
    • Engine efficiency ?m 100% ?M 100%: 80.7%

    Materials

    • Pump body: Cast iron
    • Impeller: PPE/PS-GF30
    • Shaft: Stainless steel
    • Mechanical seal: Q1BE3GG
    • Gasket material: EPDM
    • Manifold material: 1.0026, zinc plated

    Description

    Water supply system with 2 fixed performance high head centrifugal pumps, mounted in parallel and arranged horizontally, in the version with ventilated motor of the MHIL series, with normal suction. Ready for connection with stainless steel collectors, mounted on plinth, equipped with a BC command device.

    For fully automatic water supply and pressure boosting in residential buildings and small businesses.

    For pumping drinking water and clean industrial water, as well as other aqueous solutions which do not chemically or mechanically attack the materials used and which do not contain abrasive or fibrous substances.

    Product specificity/advantages

    • High operational safety thanks to the system with two horizontal MHIL multistage pumps with stainless steel hydraulic system

    • High-efficiency EC motor with IE3 class for three-phase motors from 0.75 kW and above

    • Drinking water approval (DHW) for pumps with wetted parts made of stainless steel

    • Easy to use thanks to the Basic Control command station with all the necessary functions

    Equipment/function

    • For each system, two pumps of the MHIL 3 to MHIL 5 series with standardized motor IE3 for 3~ motors and IE1 for 1~ motors
    • Wetted parts are corrosion resistant
    • Base in galvanized steel
    • Galvanized steel manifolds
    • Shut-off valve on the suction and discharge side of each pump
    • Check valve on the discharge side of each pump
    • Pressure switch, discharge side
    • Pressure gauge, delivery side
    • Optional protection against water shortage, suction side
    • Automatic pump control specific for the management of fixed performance pumps with the control unit

    BasicControl , housed in a plastic case.

    The electromechanical technology used guarantees the functions required for operation. Start/stop of pumps by pressure switch; protection against lack of water, motor protection switch, cyclical pump switching, delay in switching off the pumps. An LED indicator provides information on any alarms and on the operation of the pumps and has an operating mode selector.


    Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • marca: Wilo
    • modello: P_A50051281_1
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account