icon Decentralized Vmc Unit Vortice Hrw 20 Heat Recovery Unit With Remote Control | CaldaieMurali

Decentralized Vmc Unit Vortice Hrw 20 Heat Recovery Unit With Remote Control

Description

Decentralized Ventilation Unit HRW 20 Vortice Heat Recovery Unit with remote control


  • Filter class
    G3
  • Max absorbed current (A)
    0.05
  • Max absorbed current at max speed (TO)
    0.05
  • Max current absorbed at min speed (TO)
    0.015
  • Nominal Duct Diameter (mm)
    160
  • Frequency (Hz)
    50
  • IP Protection Degree
    x4
  • Isolation
    2nd class
  • Weight kg)
    2.55
  • Max absorbed power (W)
    5.0
  • Max absorbed power at max speed (W)
    5.0
  • Max absorbed power at min speed (W)
    1.0
  • Voltage (V)
    220-240
  • Max Recovery Efficiency (%)
    90
  • Maximum flow rate (l/s)
    11.3
  • Max flow rate (m³/h)
    41
  • Max flow rate at max speed (l/s)
    11.3
  • Max flow rate at max speed (m³/h)
    41
  • Max flow rate at min speed (l/s)
    2.77
  • Max flow rate at min speed (m³/h)
    10.0
  • Maximum pressure (mmH2O)
    4.1
  • Maximum pressure (Pa)
    40.6
  • Max pressure at max speed (mmH2O)
    4.1
  • Max pressure at max speed (pa)
    40.6
  • Max pressure at min speed (mmH2O)
    0.635
  • Max pressure at min speed (pa)
    6.22
  • Sound Pressure Lp in free field [dB(A)] 3 m max vel.
    23.6
  • Sound Pressure Lp in free field [dB(A)] 3 m min vel.
    <16

HRW vortex 20

  • Enclosure in expanded polypropylene material (PPE).
  • Internal panel in self-extinguishing V0 aesthetic plastic polymer (ABS), lined internally with heat-insulating material.
  • Low voltage EC fan motor with shaft mounted on ball bearings.
  • 5 speeds with different flow rates: 10 m3/h; 16 m3/h; 22 m3/h; 30 m3/h and 40 m3/h.
  • High efficiency storage type heat exchanger made of ceramic material.
  • External grille molded in rubber, mountable from the inside through the hole in the wall.
  • Separate anti-insect net, which can be inserted into the duct together with the external grille at the time of installation.
  • Internal air intake made on the perimeter of the front panel.
  • Circular section air delivery port with a nominal diameter of 160 mm.
  • Target Wall Depth: 300mm. Using the specific optional kit, it is possible to install them on walls with a depth of up to 700 mm.
  • Washable G3 filter, easily accessible for maintenance.
  • On/off and operating mode selection controls integrated in the body of the product;
  • Arrangement for wall wiring;
  • Electronic card with on-board power supply, integrated in the product;
  • Diagnostic LED and filter status;
  • 3 operating modes:
  • Ventilation with heat recovery;
  • Ventilation with air extraction only;
  • Ventilation with air inlet only.
  • Possibility of automatic operation by installing optional temperature and relative humidity sensors.

Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Decentralized Vmc Unit Vortice Hrw 20 Heat Recovery Unit With Remote Control

Product form

Decentralized Ventilation Unit HRW 20 Vortice Heat Recovery Unit with remote control Filter class G3 Max absorbed current (A) 0.05... Read more

€255,00 Incl. VAT

    Description

    Decentralized Ventilation Unit HRW 20 Vortice Heat Recovery Unit with remote control


    • Filter class
      G3
    • Max absorbed current (A)
      0.05
    • Max absorbed current at max speed (TO)
      0.05
    • Max current absorbed at min speed (TO)
      0.015
    • Nominal Duct Diameter (mm)
      160
    • Frequency (Hz)
      50
    • IP Protection Degree
      x4
    • Isolation
      2nd class
    • Weight kg)
      2.55
    • Max absorbed power (W)
      5.0
    • Max absorbed power at max speed (W)
      5.0
    • Max absorbed power at min speed (W)
      1.0
    • Voltage (V)
      220-240
    • Max Recovery Efficiency (%)
      90
    • Maximum flow rate (l/s)
      11.3
    • Max flow rate (m³/h)
      41
    • Max flow rate at max speed (l/s)
      11.3
    • Max flow rate at max speed (m³/h)
      41
    • Max flow rate at min speed (l/s)
      2.77
    • Max flow rate at min speed (m³/h)
      10.0
    • Maximum pressure (mmH2O)
      4.1
    • Maximum pressure (Pa)
      40.6
    • Max pressure at max speed (mmH2O)
      4.1
    • Max pressure at max speed (pa)
      40.6
    • Max pressure at min speed (mmH2O)
      0.635
    • Max pressure at min speed (pa)
      6.22
    • Sound Pressure Lp in free field [dB(A)] 3 m max vel.
      23.6
    • Sound Pressure Lp in free field [dB(A)] 3 m min vel.
      <16

    HRW vortex 20

    • Enclosure in expanded polypropylene material (PPE).
    • Internal panel in self-extinguishing V0 aesthetic plastic polymer (ABS), lined internally with heat-insulating material.
    • Low voltage EC fan motor with shaft mounted on ball bearings.
    • 5 speeds with different flow rates: 10 m3/h; 16 m3/h; 22 m3/h; 30 m3/h and 40 m3/h.
    • High efficiency storage type heat exchanger made of ceramic material.
    • External grille molded in rubber, mountable from the inside through the hole in the wall.
    • Separate anti-insect net, which can be inserted into the duct together with the external grille at the time of installation.
    • Internal air intake made on the perimeter of the front panel.
    • Circular section air delivery port with a nominal diameter of 160 mm.
    • Target Wall Depth: 300mm. Using the specific optional kit, it is possible to install them on walls with a depth of up to 700 mm.
    • Washable G3 filter, easily accessible for maintenance.
    • On/off and operating mode selection controls integrated in the body of the product;
    • Arrangement for wall wiring;
    • Electronic card with on-board power supply, integrated in the product;
    • Diagnostic LED and filter status;
    • 3 operating modes:
    • Ventilation with heat recovery;
    • Ventilation with air extraction only;
    • Ventilation with air inlet only.
    • Possibility of automatic operation by installing optional temperature and relative humidity sensors.

    Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 25.0 kg
    • marca: Vortex
    • modello: VORTICE HRW20
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account