icon Vaillant Ecotec Plus Condensing Boiler Vmi 346/5-5 With Kettle Complete With Fume Kit - Erp Methane | CaldaieMurali

Vaillant Ecotec Plus Condensing Boiler Vmi 346/5-5 With Kettle Complete With Fume Kit - Erp Methane

Description

NB: IN THE ABSENCE OF THE PRODUCT THE FOLLOWING MODEL VMI 35 WILL BE SHIPPED

VAILLANT ecoTEC PLUS CONDENSING BOILER VMI 346/5-5 with boiler COMPLETE WITH FUME KIT - ErP METHANE


Technical features


  • ErP energy class (Heating and DHW): class A
  • Sanitary load profile - XL
  • For heating and domestic hot water production
  • Forced draft sealed chamber
  • Nominal thermal power in sanitary kW 34
  • DHW nominal heat input kW 34
  • Performance stars (according to Dir. 92/42CEE) - ****
  • Consumption at nominal power Natural gas m3 /h 3.7
  • Expansion vessel capacity 10 l
  • Maximum water content in the system l 180
  • Storage tank setting temperature °C 35 - 65
  • Boiler nominal volume l 20
  • Minimum water flow l/min 1.5
  • Hot water withdrawal capacity (ΔT = 30K) l/10min 199
  • Domestic hot water comfort stars (prEN 13203) - ***
  • Dimensions (hxpxl) mm 720x567x440; 59.5kg
  • Power supply V/Hz 230/50
  • Total electric power W 115
  • Sound power dBA 49
  • IP degree of protection IP X4 D
  • NOx class - 5
  • Version: CNG (0010019531)
  • To view more product information CLICK HERE
  • General characteristics
  • Vaillant condensing boiler


With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency.

The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year.


ecoTEC PLUS with boiler

Little space and a large family? ecoTEC plus with built-in wall-mounted boiler is the boiler designed to satisfy a high demand for hot water when spaces do not allow for the installation of external boilers.

  • The VMW ecoTEC plus with actoSTOR CL 20 S integrable storage tank are available in power ratings of: 30 and 34 kW.

  • This stratification boiler is a real hot water reserve that can be installed very easily and quickly directly between the wall and the boiler. An exceptional solution that ensures the quantity of water needed is always available and without sudden changes in temperature.

  • The boiler system with storage tank is very simple to assemble: first install the actoSTOR CL wall-mounted storage tank and the related pipes supplied for domestic water, then hang the ecoTEC plus VMW wall-mounted boiler on the storage tank. The dimensions are very small 70cm high, 44cm wide and 55cm deep.

  • The stratification storage tank guarantees the same performance as a storage tank with a 60-litre coil but with considerably reduced spaces. The combination with ecoTEC plus allows you to exclude the storage tank functionality by making the boiler work instantaneously; this allows a considerable saving on gas consumption.

  • New electronics and a very high efficiency pump make ecoTEC plus the wall-mounted condensing boiler that consumes less on the European market. ecoTEC plus is compatible with all Vaillant components and accessories already on the market. The new design is simple and intuitive.


Product Guarantee
All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Vaillant Ecotec Plus Condensing Boiler Vmi 346/5-5 With Kettle Complete With Fume Kit - Erp Methane

Product form

NB: IN THE ABSENCE OF THE PRODUCT THE FOLLOWING MODEL VMI 35 WILL BE SHIPPED VAILLANT ecoTEC PLUS CONDENSING BOILER... Read more

€1.903,00 Incl. VAT

    Description

    NB: IN THE ABSENCE OF THE PRODUCT THE FOLLOWING MODEL VMI 35 WILL BE SHIPPED

    VAILLANT ecoTEC PLUS CONDENSING BOILER VMI 346/5-5 with boiler COMPLETE WITH FUME KIT - ErP METHANE


    Technical features


    • ErP energy class (Heating and DHW): class A
    • Sanitary load profile - XL
    • For heating and domestic hot water production
    • Forced draft sealed chamber
    • Nominal thermal power in sanitary kW 34
    • DHW nominal heat input kW 34
    • Performance stars (according to Dir. 92/42CEE) - ****
    • Consumption at nominal power Natural gas m3 /h 3.7
    • Expansion vessel capacity 10 l
    • Maximum water content in the system l 180
    • Storage tank setting temperature °C 35 - 65
    • Boiler nominal volume l 20
    • Minimum water flow l/min 1.5
    • Hot water withdrawal capacity (ΔT = 30K) l/10min 199
    • Domestic hot water comfort stars (prEN 13203) - ***
    • Dimensions (hxpxl) mm 720x567x440; 59.5kg
    • Power supply V/Hz 230/50
    • Total electric power W 115
    • Sound power dBA 49
    • IP degree of protection IP X4 D
    • NOx class - 5
    • Version: CNG (0010019531)
    • To view more product information CLICK HERE
    • General characteristics
    • Vaillant condensing boiler


    With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency.

    The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year.


    ecoTEC PLUS with boiler

    Little space and a large family? ecoTEC plus with built-in wall-mounted boiler is the boiler designed to satisfy a high demand for hot water when spaces do not allow for the installation of external boilers.

    • The VMW ecoTEC plus with actoSTOR CL 20 S integrable storage tank are available in power ratings of: 30 and 34 kW.

    • This stratification boiler is a real hot water reserve that can be installed very easily and quickly directly between the wall and the boiler. An exceptional solution that ensures the quantity of water needed is always available and without sudden changes in temperature.

    • The boiler system with storage tank is very simple to assemble: first install the actoSTOR CL wall-mounted storage tank and the related pipes supplied for domestic water, then hang the ecoTEC plus VMW wall-mounted boiler on the storage tank. The dimensions are very small 70cm high, 44cm wide and 55cm deep.

    • The stratification storage tank guarantees the same performance as a storage tank with a 60-litre coil but with considerably reduced spaces. The combination with ecoTEC plus allows you to exclude the storage tank functionality by making the boiler work instantaneously; this allows a considerable saving on gas consumption.

    • New electronics and a very high efficiency pump make ecoTEC plus the wall-mounted condensing boiler that consumes less on the European market. ecoTEC plus is compatible with all Vaillant components and accessories already on the market. The new design is simple and intuitive.


    Product Guarantee
    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 65.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane
    • marca: VAILLANT
    • metri quadri : 250
    • modello: CALD_392
    • potenza in kw: 34
    • potenza nominale: 34
    • superficie riscaldabile mq: 250
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account