icon Smisol Frio Copper Pipe Smisol Frio For Chilled Water 50 Meters 16 X 1 Mm Coated In Polyethylene | CaldaieMurali

Smisol Frio Copper Pipe Smisol Frio For Chilled Water 50 Meters 16 X 1 Mm Coated In Polyethylene

Description

Technical Features
  • Dimensions External Diameter: 16 mm
  • Thickness: 1mm
  • Roll Length: 50m
  • Minimum Coating Thickness: 10 mm
  • Burst Pressure : 28.05MPa
  • Working Pressure : 7.01MPa
  • Water content: 0.154 l/m

SMISOL® Frio Fears neither the Heat nor the Cold

It is the copper tube produced according to the EN 12735-1 standard (and ASTM B 68/M), and is pre-insulated in closed-cell expanded polyethylene of regular and uniformly distributed dimensions (UNI EN 14114). It is distributed in rolls, having the dimensions of the diameter of the tube in millimetres. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective polyethylene film aimed at preventing the formation of condensation on the external wall of the product.


Internal Surface

The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows to obtain an integrated system with the terminal elements of the plant. The particular internal cleanliness of SMISOL® Frio is safeguarded by closing the ends of each roll with caps, directly during the production phase.


External Protection

Closed-cell expanded polyethylene coating with an average value of the water vapour diffusion resistance factor “µ” greater than 15000. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment and has a fire behaviour of class BL-s1-d0 according to EN 13501-1.


Coating Features

  • Thermal conductivity: λ ≤0.040 W/m°C.
  • Average value of the water vapour diffusion resistance factor “µ” greater than 15000.
  • Average coating density: 33 kg/m3.
  • Free from ammonia residues.
  • Excellent resistance to external chemical agents.
  • Non-flammable class BL-s1-d0 according to EN 13501-1
  • Free from CFCs and HCFCs (Reg. EEC/EU 2037/2000)

Design Guidelines
To avoid possible condensation phenomena on the pipe, it is necessary to check the environmental conditions in which the product is installed: relative humidity of the environment, temperature of the environment and of the fluid inside the pipe. In this regard, it is recommended to check using the Psychrometric chart
Smisol Frio

Fields of Use
  • Refrigeration.
  • Transport of heat transfer fluids for multifunctional systems

Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Smisol Frio Copper Pipe Smisol Frio For Chilled Water 50 Meters 16 X 1 Mm Coated In Polyethylene

Product form

Technical Features Dimensions External Diameter: 16 mm Thickness: 1mm Roll Length: 50m Minimum Coating Thickness: 10 mm Burst Pressure :... Read more

€545,00 Incl. VAT

    Description

    Technical Features
    • Dimensions External Diameter: 16 mm
    • Thickness: 1mm
    • Roll Length: 50m
    • Minimum Coating Thickness: 10 mm
    • Burst Pressure : 28.05MPa
    • Working Pressure : 7.01MPa
    • Water content: 0.154 l/m

    SMISOL® Frio Fears neither the Heat nor the Cold

    It is the copper tube produced according to the EN 12735-1 standard (and ASTM B 68/M), and is pre-insulated in closed-cell expanded polyethylene of regular and uniformly distributed dimensions (UNI EN 14114). It is distributed in rolls, having the dimensions of the diameter of the tube in millimetres. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective polyethylene film aimed at preventing the formation of condensation on the external wall of the product.


    Internal Surface

    The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows to obtain an integrated system with the terminal elements of the plant. The particular internal cleanliness of SMISOL® Frio is safeguarded by closing the ends of each roll with caps, directly during the production phase.


    External Protection

    Closed-cell expanded polyethylene coating with an average value of the water vapour diffusion resistance factor “µ” greater than 15000. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment and has a fire behaviour of class BL-s1-d0 according to EN 13501-1.


    Coating Features

    • Thermal conductivity: λ ≤0.040 W/m°C.
    • Average value of the water vapour diffusion resistance factor “µ” greater than 15000.
    • Average coating density: 33 kg/m3.
    • Free from ammonia residues.
    • Excellent resistance to external chemical agents.
    • Non-flammable class BL-s1-d0 according to EN 13501-1
    • Free from CFCs and HCFCs (Reg. EEC/EU 2037/2000)

    Design Guidelines
    To avoid possible condensation phenomena on the pipe, it is necessary to check the environmental conditions in which the product is installed: relative humidity of the environment, temperature of the environment and of the fluid inside the pipe. In this regard, it is recommended to check using the Psychrometric chart
    Smisol Frio

    Fields of Use
    • Refrigeration.
    • Transport of heat transfer fluids for multifunctional systems

    Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 1.0 kg
    • marca: SCTubes
    • modello: Smisol Frio 16 x 1
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account