icon Boiler Savio Superevodens 24 S* Methane Condensation Complete With Fume Exhaust Kit - Erp | CaldaieMurali

Boiler Savio Superevodens 24 S* Methane Condensation Complete With Fume Exhaust Kit - Erp

Description

SAVIO SuperEVOdens 24 S* METHANE CONDENSING Boiler Complete with Fume Exhaust Kit - ErP


  • Model: SuperEVOdens 24S

ErP specifications

  • Class B heating energy efficiency
  • Sanitary energy efficiency Class A
  • Withdrawal profile: XL
  • Heating/DHW nominal heat input: 25 kW
  • Heating/DHW maximum useful power: 24.4 kW
  • Yield name 60°/80°C: 97.4%
  • Yield at 30% load: 98.9%
  • High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06)
  • NOx class 2
  • Weighted NOx: 166 mg/kWh
  • Minimum/maximum heating temperature: 40/85°C
  • Minimum/maximum heating pressure 3.0/0.3 bar
  • Expansion vessel capacity 8 l (total)
  • Minimum/maximum domestic hot water temperature 35/60°C
  • Maximum flow rate (ΔT=25K)/(ΔT=35K): 13.9/10 l/min
  • Specific sanitary flow rate (ΔT=30 K): 11.6 l/min
  • Voltage / Power at nominal heat input V~/ W 230/82
  • IPX4D degree of protection
  • Dimensions HxWxD 803x400x350; 42.5 kgs
  • Power supply: methane or LPG

Standard

  • Digital electronic room thermostat
  • Boiler support bracket and paper template
  • Condensate collection siphon
  • Quick instruction to the user

SuperEVO dens

SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution device for heating


Savings and ease of use

SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers.

  • High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06)
  • Copper lamellar primary heat exchanger with large exchange surface and double circulation
  • Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water
  • Sanitary plate heat exchanger in stainless steel
  • High efficiency pump with low energy consumption
  • Digital control panel with backlit display
  • Electronic card for:

    - Restart frequency adjustment
    - Adjustable primary circuit thermal inertia disposal
    - Circulator mode selection
    - Circulator anti-seize
    - Antifreeze safety
    - Chimney sweep function
  • Integrated automatic by-pass
  • 8 liter expansion vessel
  • Immunity to radio interference
  • Magnetic sanitary flow switch
  • Absolute heating pressure switch
  • IPX4D degree of protection
High circulation primary exchanger

It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators.

Heat recovery

The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly

Command panel

  • Summer/winter/off selector
  • Heating temperature regulator
  • DHW temperature regulator
  • Digital and analog pressure reading
  • DHW and heating temperature visualization from the display
  • Display of fault diagnostics, block status and fault history
  • Recommended fill display
  • Display annual periodic maintenance expiry

Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Boiler Savio Superevodens 24 S* Methane Condensation Complete With Fume Exhaust Kit - Erp

Product form

SAVIO SuperEVOdens 24 S* METHANE CONDENSING Boiler Complete with Fume Exhaust Kit - ErP Model: SuperEVOdens 24S ErP specifications Class... Read more

€665,00 Incl. VAT

    Description

    SAVIO SuperEVOdens 24 S* METHANE CONDENSING Boiler Complete with Fume Exhaust Kit - ErP


    • Model: SuperEVOdens 24S

    ErP specifications

    • Class B heating energy efficiency
    • Sanitary energy efficiency Class A
    • Withdrawal profile: XL
    • Heating/DHW nominal heat input: 25 kW
    • Heating/DHW maximum useful power: 24.4 kW
    • Yield name 60°/80°C: 97.4%
    • Yield at 30% load: 98.9%
    • High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06)
    • NOx class 2
    • Weighted NOx: 166 mg/kWh
    • Minimum/maximum heating temperature: 40/85°C
    • Minimum/maximum heating pressure 3.0/0.3 bar
    • Expansion vessel capacity 8 l (total)
    • Minimum/maximum domestic hot water temperature 35/60°C
    • Maximum flow rate (ΔT=25K)/(ΔT=35K): 13.9/10 l/min
    • Specific sanitary flow rate (ΔT=30 K): 11.6 l/min
    • Voltage / Power at nominal heat input V~/ W 230/82
    • IPX4D degree of protection
    • Dimensions HxWxD 803x400x350; 42.5 kgs
    • Power supply: methane or LPG

    Standard

    • Digital electronic room thermostat
    • Boiler support bracket and paper template
    • Condensate collection siphon
    • Quick instruction to the user

    SuperEVO dens

    SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution device for heating


    Savings and ease of use

    SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers.

    • High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06)
    • Copper lamellar primary heat exchanger with large exchange surface and double circulation
    • Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water
    • Sanitary plate heat exchanger in stainless steel
    • High efficiency pump with low energy consumption
    • Digital control panel with backlit display
    • Electronic card for:

      - Restart frequency adjustment
      - Adjustable primary circuit thermal inertia disposal
      - Circulator mode selection
      - Circulator anti-seize
      - Antifreeze safety
      - Chimney sweep function
    • Integrated automatic by-pass
    • 8 liter expansion vessel
    • Immunity to radio interference
    • Magnetic sanitary flow switch
    • Absolute heating pressure switch
    • IPX4D degree of protection
    High circulation primary exchanger

    It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators.

    Heat recovery

    The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly

    Command panel

    • Summer/winter/off selector
    • Heating temperature regulator
    • DHW temperature regulator
    • Digital and analog pressure reading
    • DHW and heating temperature visualization from the display
    • Display of fault diagnostics, block status and fault history
    • Recommended fill display
    • Display annual periodic maintenance expiry

    Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 35.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: B
    • gas: Methane
    • marca: Wise
    • metri quadri : 120
    • modello: SUPEREVODENS 24 S METANO
    • potenza in kw: 24
    • potenza nominale: 24
    • superficie riscaldabile mq: 120
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account