icon Magnetic Dirt Separator Under Boiler Rbm Mag-Net Compact Series 3892 3/4" | CaldaieMurali

Magnetic Dirt Separator Under Boiler Rbm Mag-Net Compact Series 3892 3/4"

Description

Compact Magnetic Dirt Remover Under Boiler RBM MAG-NET series 3892 3/4"


CONSTRUCTION FEATURES

  • Cartridge holder body: Polyamide PA66 + 30% FV
  • Filter cartridge: AISI 304
  • Hydraulic seals: EPDM PEROX

Magnets:

  • B (Tmax) / B (Tamb)* < 1% (where Tmax = 130°C, Tamb = 21°C)
  • Tested according to IEC 60404-5 & ASTM A977 standards
  • neodymium
  • REN35 B= 11000/12000 Gauss

Attacks:

  • System return: M 3/4'' Flat seat
  • Boiler inlet: 3/4” swivel nut Flat seat
  • UNI EN ISO 228

TECHNICAL FEATURES

  • Compatible fluid: Water, water + glycol
  • max pressure exercise: 3 Bars
  • Working temperature: 0÷80°C
  • Standard filter filtration degree: 800 µm

RBM mag-net

  • Supercompact
  • Interception system included
  • High efficiency
  • Eliminate impurities
  • Fights corrosion
  • Extends the life of the boiler
  • It guarantees the efficiency of the system

DESCRIPTION OF THE OPERATING PRINCIPLE

Through its effective and constant action, the magnetic filter collects all the impurities present in the system, preventing them from circulating inside it, thus avoiding wear and damage to the rest of the system components, in particular circulators and heat exchangers. heat. Mag-net exerts a continuous protective action on the boiler

USE

It is recommended to install Mag-net on the return circuit, at the boiler inlet, to protect it from all the impurities present in the system, especially during the start-up phase. Thanks to its compact size, it can be used under the boiler, in systems for domestic use, where installation spaces are very limited and therefore a traditional dirt separator would not fit.

FILTRATION DEGREE

Mag-net removes magnetic and non-magnetic particles that can cause damage to the installation during the first day of operation. The continuous passage of the fluid through the filter during normal operation of the system in which it is installed gradually leads to the complete removal of dirt.

FILTRATION PRINCIPLE:

Through a fixed path, the fluid is forced to pass through the mesh of the filter cartridge (800 µm) and enter the filtration chamber.
In this filtration chamber through the simultaneous action of:

- filter cartridge (direct mechanical filtration)
- magnet
- design choices regarding the filtration chamber section the water full of debris undergoes a filtration treatment.

First of all, the sudden change in section (the filtration chamber has a larger diameter than the duct), slows down the motion of the fluid and consequently the entrainment speed of the particles suspended in it.

Larger particles are stopped directly by the mechanical filter. The magnet, placed inside a cylinder positioned in the center of the
filtration chamber, attracts all impurities with magnetic characteristics.

Incoming stream
Filter cartridge
Magnet
Filtration chamber
Outgoing stream

In this way all the magnetic (ferrous residues) and non-magnetic (algae, mud, sand, etc.) contaminants present in the system are retained in the filtration chamber. The standard stainless steel cartridge has been designed not to exert excessive resistance to the passage of the fluid (low pressure drops) and acts by direct mechanical filtration without affecting the operation of the heating/cooling system.


Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Magnetic Dirt Separator Under Boiler Rbm Mag-Net Compact Series 3892 3/4"

Product form

Compact Magnetic Dirt Remover Under Boiler RBM MAG-NET series 3892 3/4" CONSTRUCTION FEATURES Cartridge holder body: Polyamide PA66 + 30%... Read more

€45,00 Incl. VAT

    Description

    Compact Magnetic Dirt Remover Under Boiler RBM MAG-NET series 3892 3/4"


    CONSTRUCTION FEATURES

    • Cartridge holder body: Polyamide PA66 + 30% FV
    • Filter cartridge: AISI 304
    • Hydraulic seals: EPDM PEROX

    Magnets:

    • B (Tmax) / B (Tamb)* < 1% (where Tmax = 130°C, Tamb = 21°C)
    • Tested according to IEC 60404-5 & ASTM A977 standards
    • neodymium
    • REN35 B= 11000/12000 Gauss

    Attacks:

    • System return: M 3/4'' Flat seat
    • Boiler inlet: 3/4” swivel nut Flat seat
    • UNI EN ISO 228

    TECHNICAL FEATURES

    • Compatible fluid: Water, water + glycol
    • max pressure exercise: 3 Bars
    • Working temperature: 0÷80°C
    • Standard filter filtration degree: 800 µm

    RBM mag-net

    • Supercompact
    • Interception system included
    • High efficiency
    • Eliminate impurities
    • Fights corrosion
    • Extends the life of the boiler
    • It guarantees the efficiency of the system

    DESCRIPTION OF THE OPERATING PRINCIPLE

    Through its effective and constant action, the magnetic filter collects all the impurities present in the system, preventing them from circulating inside it, thus avoiding wear and damage to the rest of the system components, in particular circulators and heat exchangers. heat. Mag-net exerts a continuous protective action on the boiler

    USE

    It is recommended to install Mag-net on the return circuit, at the boiler inlet, to protect it from all the impurities present in the system, especially during the start-up phase. Thanks to its compact size, it can be used under the boiler, in systems for domestic use, where installation spaces are very limited and therefore a traditional dirt separator would not fit.

    FILTRATION DEGREE

    Mag-net removes magnetic and non-magnetic particles that can cause damage to the installation during the first day of operation. The continuous passage of the fluid through the filter during normal operation of the system in which it is installed gradually leads to the complete removal of dirt.

    FILTRATION PRINCIPLE:

    Through a fixed path, the fluid is forced to pass through the mesh of the filter cartridge (800 µm) and enter the filtration chamber.
    In this filtration chamber through the simultaneous action of:

    - filter cartridge (direct mechanical filtration)
    - magnet
    - design choices regarding the filtration chamber section the water full of debris undergoes a filtration treatment.

    First of all, the sudden change in section (the filtration chamber has a larger diameter than the duct), slows down the motion of the fluid and consequently the entrainment speed of the particles suspended in it.

    Larger particles are stopped directly by the mechanical filter. The magnet, placed inside a cylinder positioned in the center of the
    filtration chamber, attracts all impurities with magnetic characteristics.

    Incoming stream
    Filter cartridge
    Magnet
    Filtration chamber
    Outgoing stream

    In this way all the magnetic (ferrous residues) and non-magnetic (algae, mud, sand, etc.) contaminants present in the system are retained in the filtration chamber. The standard stainless steel cartridge has been designed not to exert excessive resistance to the passage of the fluid (low pressure drops) and acts by direct mechanical filtration without affecting the operation of the heating/cooling system.


    Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 5.0 kg
    • marca: RBM extension
    • modello: 3892.05.50
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account