icon Atlas Filtri - Polyphosphate Doser Mod. Dosaplus 1-2 In Powder From 1/2" | CaldaieMurali

Atlas Filtri - Polyphosphate Doser Mod. Dosaplus 1-2 In Powder From 1/2"

Description

Atlas Filtri - Polyphosphate dispenser mod. DOSAPLUS 2 Powder 1/2"


  • Dosing unit with Venturi effect for proportional dosing of polyphosphate
  • Maximum pressure : 10 BAR
  • Maximum temperature : 40°C
  • Maximum water hardness : 35°F (350 ppm CaCo3)
  • IN/OUT ports: 1/2"
  • Optimal flow rate: 1500 l/h
  • Polyphosphate charge: 65 gr
  • Type of polyphosphate filler: Poliphos
  • Included in the package:
  • 1 Poliphos refill
  • Warning: the treated water can be heated up to 75°-80°C, beyond this temperature the polyphosphate gradually loses effectiveness.

DISPENSERS

Polyphosphate dispensers are used as effective anti-limescale and anti-corrosion systems to protect boilers, washing machines, dishwashers and boilers .
The automatic and proportional dosage of the anti-limescale and anti-corrosive product is able to prevent the deposits of calcium carbonate and incrustations and at the same time form a protective film inside the pipes.
The dosers work according to a hydrodynamic principle based on the Venturi effect : a diaphragm disc, placed inside a straight pipe, with an opening with a diameter smaller than that of the pipe, creates a pressure difference between upstream and downstream of the diaphragm, proportional to the flow of water passing through it.

DOSAPLUS

Proportional dosers of polyphosphate powder with Poliphos ready-loading brass head.

  • Performance: Better thermal efficiency of the systems; Reduction of energy costs and low operating costs.
  • Maintenance: Practical and simple thanks to the use of Poliphos ready-to-fill polyphosphate.
  • Efficacy : Protection of systems and distribution circuits from scale deposits and corrosion by dosing a specially formulated salt (Poliphos) in the water; rehabilitation of old systems with reduction of limescale encrustations and corrosion phenomena already in progress.

APPLICATIONS:

Anti-limescale and anti-corrosion treatment of water with neutral PH and drinking water for domestic and industrial installations.

  • Domestic uses : protection of pipes, boilers and other installations for applications with the use of potable water.
  • Technical uses : protection of pipes, fittings, boilers and other water heating systems.
  • Maintenance : replace the polyphosphate charge when it runs out, or at least every 6 months.

Warning: Use a pre-filter to protect the dispenser

CHARACTERISTICS:

Non-toxic materials.

  • Head and ferrule: CW 602 N brass.
  • Glass: SAN.
  • O-rings: EPDM.
  • Bellows: natural rubber (NBR).
  • Treatment material: sodium polyphosphate in ready-to-use filler supplied.

Warning: Maximum storage time 12 months.


Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Atlas Filtri - Polyphosphate Doser Mod. Dosaplus 1-2 In Powder From 1/2"

Product form

Atlas Filtri - Polyphosphate dispenser mod. DOSAPLUS 2 Powder 1/2" Dosing unit with Venturi effect for proportional dosing of polyphosphate... Read more

€40,00 Incl. VAT

    Description

    Atlas Filtri - Polyphosphate dispenser mod. DOSAPLUS 2 Powder 1/2"


    • Dosing unit with Venturi effect for proportional dosing of polyphosphate
    • Maximum pressure : 10 BAR
    • Maximum temperature : 40°C
    • Maximum water hardness : 35°F (350 ppm CaCo3)
    • IN/OUT ports: 1/2"
    • Optimal flow rate: 1500 l/h
    • Polyphosphate charge: 65 gr
    • Type of polyphosphate filler: Poliphos
    • Included in the package:
    • 1 Poliphos refill
    • Warning: the treated water can be heated up to 75°-80°C, beyond this temperature the polyphosphate gradually loses effectiveness.

    DISPENSERS

    Polyphosphate dispensers are used as effective anti-limescale and anti-corrosion systems to protect boilers, washing machines, dishwashers and boilers .
    The automatic and proportional dosage of the anti-limescale and anti-corrosive product is able to prevent the deposits of calcium carbonate and incrustations and at the same time form a protective film inside the pipes.
    The dosers work according to a hydrodynamic principle based on the Venturi effect : a diaphragm disc, placed inside a straight pipe, with an opening with a diameter smaller than that of the pipe, creates a pressure difference between upstream and downstream of the diaphragm, proportional to the flow of water passing through it.

    DOSAPLUS

    Proportional dosers of polyphosphate powder with Poliphos ready-loading brass head.

    • Performance: Better thermal efficiency of the systems; Reduction of energy costs and low operating costs.
    • Maintenance: Practical and simple thanks to the use of Poliphos ready-to-fill polyphosphate.
    • Efficacy : Protection of systems and distribution circuits from scale deposits and corrosion by dosing a specially formulated salt (Poliphos) in the water; rehabilitation of old systems with reduction of limescale encrustations and corrosion phenomena already in progress.

    APPLICATIONS:

    Anti-limescale and anti-corrosion treatment of water with neutral PH and drinking water for domestic and industrial installations.

    • Domestic uses : protection of pipes, boilers and other installations for applications with the use of potable water.
    • Technical uses : protection of pipes, fittings, boilers and other water heating systems.
    • Maintenance : replace the polyphosphate charge when it runs out, or at least every 6 months.

    Warning: Use a pre-filter to protect the dispenser

    CHARACTERISTICS:

    Non-toxic materials.

    • Head and ferrule: CW 602 N brass.
    • Glass: SAN.
    • O-rings: EPDM.
    • Bellows: natural rubber (NBR).
    • Treatment material: sodium polyphosphate in ready-to-use filler supplied.

    Warning: Maximum storage time 12 months.


    Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • marca: NO BRAND
    • modello: DOSAPLUS 1-2
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account