icon Electric Extractor Fan For Fireplaces In Dark Brown Pre-painted Sheet Metal Complete With Six-speed Control Unit For Square Flues 32×42 Cm Universal Mod. | CaldaieMurali

Electric Extractor Fan For Fireplaces In Dark Brown Pre-painted Sheet Metal Complete With Six-speed Control Unit For Square Flues 32×42 Cm Universal Mod.

Description

ATTENTION If you want to pay cash on delivery, you must pay 10% of the total purchase as a deposit.

General characteristics

  • Article code: 10.E
  • Typology: Single wall
  • Model: Universal (for square chimneys)
  • Material: pre-painted sheet metal
  • Other: product complete with six-speed control unit

Data sheet
Materials used: Dark brown sheet metal, stainless steel and copper
Available sizes: the round base product is made as standard in diameters of 250 mm or 350 mm, both male cup. The square base product is made as standard with an adjustable flange that adapts from the 320 x 320 mm size to the 420 x 420 mm size.

Engine data

  • Power: 0.18KW
  • Voltage: 230V
  • Frequency: 50Hz
  • Insulation class: F
  • Degree of protection: IP55
  • Sound pressure: 40 d(A)
  • Intensity: 1.9A
  • Revolutions: 1.350/min

Control unit components

  • 230V single-phase autotransformer
  • Voltages: 70-90-130-230V
  • Illuminated bipolar switch
  • 6A fuse
  • Rotary switch with 4 suction speeds

Product data

  • Flow rate: 1,000 m3/hour (estimated in ideal conditions at average speed)
  • Pressure: 200Pa
  • Suction: multi-speed
  • Weight: 20kg
  • Preparation on pallet: mm 1,050 x mm 1,200 and height mm 2,080: contains 20 pcs

The cable required to power an electrical terminal from the control unit to the engine must be of the FROR 450/750 V 3x1.5 mm2 type (index 3 indicates the number of wires inside the cable, earth-phase and neutral; the 1.5 mm2 indicates the surface condition that the individual wires inside the cable must have), the operating temperature ranges from -15 degrees to 70 degrees.

If the cable passes near sources of heat exceeding 100 degrees, the FROR type cable is not indicated; for these applications we recommend a thermo-resistant cable with silicone sheath, having the same dimensional characteristics as FROR, but with a wider operating temperature range ranging from -20 degrees to 200 degrees.

Applications
On the roof, on ducts intended for the disposal into the atmosphere of fumes generated by the combustion of wood-burning appliances, or air, in the case of environments where recycling is required.

Compliance:

  • EN 16475 "Chimney-Accesories-Part 2:Chimney fans-Requirements and test methods"
  • 73/23/EEC Low voltage
  • 89/336/EEC Electromagnetic compatibility
  • 89/392/EEC Machine safety
  • 93/68/EC CE marking
  • 02/96/CE Waste electrical and electronic equipment

Description
The electric aspirator has been designed to definitively solve fumes disposal or air draft problems. It finds application whenever we find ourselves solving problems on devices without air intakes, installed in almost hermetically closed environments by increasingly sealed fixtures.
Equipped as standard with a variable speed power unit, it is able to depressurize the duct/system by creating forced suction inside it.


Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Electric Extractor Fan For Fireplaces In Dark Brown Pre-painted Sheet Metal Complete With Six-speed Control Unit For Square Flues 32×42 Cm Universal Mod.

Product form

ATTENTION If you want to pay cash on delivery, you must pay 10% of the total purchase as a deposit.... Read more

€317,96 Incl. VAT

    Description

    ATTENTION If you want to pay cash on delivery, you must pay 10% of the total purchase as a deposit.

    General characteristics

    • Article code: 10.E
    • Typology: Single wall
    • Model: Universal (for square chimneys)
    • Material: pre-painted sheet metal
    • Other: product complete with six-speed control unit

    Data sheet
    Materials used: Dark brown sheet metal, stainless steel and copper
    Available sizes: the round base product is made as standard in diameters of 250 mm or 350 mm, both male cup. The square base product is made as standard with an adjustable flange that adapts from the 320 x 320 mm size to the 420 x 420 mm size.

    Engine data

    • Power: 0.18KW
    • Voltage: 230V
    • Frequency: 50Hz
    • Insulation class: F
    • Degree of protection: IP55
    • Sound pressure: 40 d(A)
    • Intensity: 1.9A
    • Revolutions: 1.350/min

    Control unit components

    • 230V single-phase autotransformer
    • Voltages: 70-90-130-230V
    • Illuminated bipolar switch
    • 6A fuse
    • Rotary switch with 4 suction speeds

    Product data

    • Flow rate: 1,000 m3/hour (estimated in ideal conditions at average speed)
    • Pressure: 200Pa
    • Suction: multi-speed
    • Weight: 20kg
    • Preparation on pallet: mm 1,050 x mm 1,200 and height mm 2,080: contains 20 pcs

    The cable required to power an electrical terminal from the control unit to the engine must be of the FROR 450/750 V 3x1.5 mm2 type (index 3 indicates the number of wires inside the cable, earth-phase and neutral; the 1.5 mm2 indicates the surface condition that the individual wires inside the cable must have), the operating temperature ranges from -15 degrees to 70 degrees.

    If the cable passes near sources of heat exceeding 100 degrees, the FROR type cable is not indicated; for these applications we recommend a thermo-resistant cable with silicone sheath, having the same dimensional characteristics as FROR, but with a wider operating temperature range ranging from -20 degrees to 200 degrees.

    Applications
    On the roof, on ducts intended for the disposal into the atmosphere of fumes generated by the combustion of wood-burning appliances, or air, in the case of environments where recycling is required.

    Compliance:

    • EN 16475 "Chimney-Accesories-Part 2:Chimney fans-Requirements and test methods"
    • 73/23/EEC Low voltage
    • 89/336/EEC Electromagnetic compatibility
    • 89/392/EEC Machine safety
    • 93/68/EC CE marking
    • 02/96/CE Waste electrical and electronic equipment

    Description
    The electric aspirator has been designed to definitively solve fumes disposal or air draft problems. It finds application whenever we find ourselves solving problems on devices without air intakes, installed in almost hermetically closed environments by increasingly sealed fixtures.
    Equipped as standard with a variable speed power unit, it is able to depressurize the duct/system by creating forced suction inside it.


    Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 50.0 kg
    • marca: NO BRAND
    • modello: CP_93466
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account